CMCOLL patch 4 hotfix 8 : database patch

hi,
I applied the CMCOLL patch 4 successfully. Now i want to apply hotfix 8 to it. In hotfix there is 1 DBPatch available. Acc. to SAP note 786452: This DB Patch of Hotfix 8 patches DB to level 'SP2.CM.SPs'. And my current database patch is SP2.CC.2 ....
Current CM version:
CM_COLL version=60 SP2 Patch 4
Current portal version:
version=6.0.2.4.0
ne precautions .... or suggestions ......
reply ASAP
rgds,
Nilz
Message was edited by: nilz

Does this patch creates or deletes any table? .... coz i am planning to take backup of table space and not of full database .... but if this HF creates or deletes any table then i'll take backup of full database .... so tht i can restore it later in case of failure of the patch ....
rgds,
Nilz

Similar Messages

CMCOLL patch4 ....... (UPGRADE EP TO THE LATEST PATCH)

hi,
I successfully installed patch 4 of portal server. Now i want to upgrade it further to patch 29. But before applying this patch, is there any need to apply CMCOLL patch first? Is there any dependency?
For applying CMCOLL patch 4 i am refering to SAP note 736243.
Acc. to it, first i'll have to deploy CMCOLL patch4 thru SDM. and the next step is "Deploy Portal SP2 patch 4 Hotfix 3".
Now here the problem is, before applying hotfix 3, i need to install hotfix 1 and 2. But if i am applying the next patch to portal server, then there is no need to install the hotfixes for the current patch. And if i am upgrading it (portal server) to the latest patch, then again my first question of dependency 'll arise.... Now i am totally confused.
So in brief, wat i want to do is,
1> upgrade SAP J2EE engine to PL29 : This has been done
2> Patch portal server with PL29 : Patch 4 applied successfully
3> Patch CM&COLL with PL29 : CM_COLL version=60 SP2 Patch 3 Hotfix 3
If u want the procedure how i installed patch4 of portal server : EP6 sp2 patch 4 problem .........
urgent help required ....
bye n thanx.....
rgds,
RangeR
Message was edited by: ranger

>>Upgrade CM&COLL to SP2 Patch 4 as described in SAP note 736243
Tht means, b4 this, i need to install hotfix 1 and 2 of portal server. (I dont know whether hotfix 1,2,3,4,8 are avialable for portal server patch 4 and if yes where?)
then while applying CM&COLL patch 4, next step would be apply portal server patch4 hotfix 3.
>> Apply Hotfix 8 (newest) for Patch 4 as Hotfix 4 is a prerequisite for installing CM&COLL SP2 Patch 5. (SAP Note 786452).
I didnt get, wat to install next? CM&COLL patch 5 or portal server hotfixes ..... and is there ne SAP note available to install CM&COLL patch 5?
and 1 more question, when applying CM&COLL patch4, i need to stop the servlet engines ..... but i dont know how to stop it or rather i dont find it newhere... the only service running in cluster with this name is servlet_jsp .... is this the same service which i need to stop
reply ASAP ....
rgds,
RangeR
Message was edited by: ranger
Message was edited by: ranger

Errors when trying to install Service Pack 3 for Exchange 2010

I have 2 Exchange 2010 servers that are running SP2 and I am trying to install SP3 on both.
They are installed in a DAG and so I am running the .\StartDAGserverMaintenance.ps1 script before attempting to install SP3. When attempting to run the SP3 setup I get the following errors:
Setup cannot continue with the upgrade because the 'powershell' (Machine: P-E10-2.company.com) process (ID: 5296) has open files. Close the process and restart Setup.
AND
Install hotfix Microsoft Knowledge Base article 2550886 from http://support.microsoft.com/kb/2550886 to improve Windows Failover Cluster transient communication instability when deploying stretched Database Availability Groups across datacenters.
I can download the hotfix and apply it but has anyone had any issues with this particular hotfix? Does anyone have any ideas about the powershell error?
thanks for your help.

Hi,
That hotfix relates to a known issue implementing DAG's across data centres (an issue particularly with Windows failover clustering). As a best practice is should always be installed. Please review the following article, which describes why it should be
installed:
http://blogs.technet.com/b/exchange/archive/2011/11/20/recommended-windows-hotfix-for-database-availability-groups-running-windows-server-2008-r2.aspx
In regards to the open files, as the other poster suggested, there will be another user logged onto the server who has a powershell window open. Ensure all other users are logged off the server before performing the upgrade.
Best Regards

Error: Current patch level of database is unknown. Use latest dbpatch build

hi,
I am applying EP6SP2 CM&COLL patch 5 DBPATCH.
current portal version: version=6.0.2.29.0
current C&COLL version: CM_COLL version=60 SP2 Patch 5
Before applying this patch, i applied CM&COLL patch 4 hotfix 8 and the DBPATCH included in tht. Now, after applying CM&COLL patch 5, i tried to apply DBPATCH which comes with CMOLL patch5 SAR file. My database is oracle database. While applying this patch i encountred following error:

Current database version: SP2.CM.SPs
ERROR: Error: Current patch level of database is unknown. Use the latest dbpatch build
java.lang.Exception: Error: Current patch level of database is unknown. Use the latest dbp
atch build.
 at com.sapportals.wcm.tool.dbpatch.Database.getPatchList(Database.java:48)
 at com.sapportals.wcm.tool.dbpatch.DBPatch.patch(DBPatch.java:66)
 at com.sapportals.wcm.tool.dbpatch.DBPatch.main(DBPatch.java:26)

Now according to SAP Note 761224, they asked us to use updated DBPATCH attached to this note. But currently there are only 3 files attached of MSSQL. I want the updated ORACLE_DBPATCH files.
rgds,
Nilz

Hi,
i m thru. i raised the question in OSS. They rectified the mistake and attached dbpatch_oracle.zip to SAP note 761224.
rgds,
Nilz

Uninstalling sap 6.0 patch 2 hotfix 3

Hello
     There was some problem in the installation files of my portal platform so I have to reinstall it again. I have a portal platform on oracle 9.2. I donot have a proper documentation for uninstalling my current installation
1) What is the procedure of uninstalling the earlier
   installation?
2) What is the procedure on the database side?
3) Do i need to select the installable option: databaser
   server again in the next installation? Or can I skip
   it and continue with the other options? If yes, should
   the oracle patch run for hotfix 3?
Any help would be appreciated.
Regards,
Gautam

Hi Jessica,
SAP generally recommends to bind in the latest Enhancement Package in case you upgrade from R/3 to SAP ERP 6.0.
Technically there is no difference in the procedure to upgrade to ERP 6.0 binding in EHP3 or EHP4.
Hence we currently recommend to use EHP4, which is generally available.
Further information can be found here: http://service.sap.com/ehp-inst
Please make sure you use the right upgrade media.
Best regards,
Christian.

Operating System And Database Patch

Hello everyone,
Does Sap have a specific note about operating system and database patch management? It is important for
me for applying operating system and database patches.

I'm not exactly sure what you're asking about but usually the operating system vendors have to make sure that applications work as before after a patch.
Since SAP applications run on many different combinations of operating systems and databases together with different kernels and/or database clients it's impossible to test them all in all combinations.
SAP has no notes with "don't use Hotfix A,B,C on your Windows machine together with Hotfix D or E on the database server"; known issues are listed in the notes for the patches themselves (on the vendors websites, not SAP).
Markus

Error while applying a patch "Unable to get the database connection"

Dear Experts,
A patch which got successfully applied is failing Production and the error is kind of surprising to me.
Apps version is 11.5.10.2
db version is 10.2.0.4
The worker log file shows
Time when worker restarted job: Thu Nov 24 2011 22:14:52
Start time for file is: Thu Nov 24 2011 22:14:52
adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
Calling /usr/java14/bin/java ...
Exception occured
 Copyright (c) 2003 Oracle Corporation
 Redwood Shores, California, USA
 XDF(XML Object Description File) Comparison Utility
 Version 1
NOTE: You may not use this utility for custom development
 unless you have written permission from Oracle Corporation.
Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
AD Run Java Command is complete.
 Copyright (c) 2002 Oracle Corporation
 Redwood Shores, California, USA
 AD Java
 Version 11.5.0
NOTE: You may not use this utility for custom development
 unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Thu Nov 24 2011 22:14:53
{code}
The error says database connection error. I am able to connect to the database using sqlplus. I tried to restart the failed worker, but the same error is repeating.
Any help would be appreciated.
Thanks
qARS
Edited by: user7640966 on Nov 24, 2011 9:07 AM

Hussein,
One thing which I noticed now is in the apps Tier the
tnsnames.ora under $TNS_ADMIN
shows entry like this:
PROD=
 (DESCRIPTION=
 (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
 (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
 (CONNECT_DATA=
 (SID=PROD)
 )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
Any clue how this can be fixed?
Thanks
qARS

Hi, I don't know how to find a specific security patch to apply to my Oracle database version to fix a vulnerability

Hi, I don't know how to find a specific security patch to apply to my Oracle database version 11.2.0.2.0 (on windows server 2003 32 bits) to fix the following vulnerability:
Risk: High
Application: oracle_tnslsnr
Port: 1521
Protocol: tcp
Synopsis:
It is possible to register with a remote Oracle TNS listener.
Description:
The remote Oracle TNS listener allows service registration from a remote host. An attacker can exploit this issue to divert data from a
legitimate database server or client to an attacker-specified system.
Successful exploits will allow the attacker to manipulate database instances, potentially facilitating man-in-the-middle, sessionhijacking,
or denial of service attacks on a legitimate database server.
Solution:
Apply the work-around in Oracle's advisory.
Thank you for your help

2835604 wrote:
Hi, I don't know how to find a specific security patch to apply to my Oracle database version 11.2.0.2.0 (on windows server 2003 32 bits) to fix the following vulnerability:
Risk: High
Application: oracle_tnslsnr
Port: 1521
Protocol: tcp
Synopsis:
It is possible to register with a remote Oracle TNS listener.
Description:
The remote Oracle TNS listener allows service registration from a remote host. An attacker can exploit this issue to divert data from a
legitimate database server or client to an attacker-specified system.
Successful exploits will allow the attacker to manipulate database instances, potentially facilitating man-in-the-middle, sessionhijacking,
or denial of service attacks on a legitimate database server.
Solution:
Apply the work-around in Oracle's advisory.
Thank you for your help
that sounds like the "tns poison" vulnerability. CVE 2012-1675 - Oracle Security Alert CVE-2012-1675
See MOS note 134083.1 and 1453883.1

Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

Hi to all.
Currently, i am trying to install patches for portal server.
The server OS is Sun Solaris 8.
We are using Oracle9iAS.
Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
We managed to install the patch, but have problem with the Post Install Action.
We managed to run
-ALTER SYSTEM ENABLE RESTRICTED SESSION;
-@rdbms/admin/catpatch.sql
-ALTER SYSTEM DISABLE RESTRICTED SESSION;
-CONNECT / AS SYSDBA
-update obj$ set status=5 where type#=29 and owner#!=0;
-commit;
But, when we come to the next command, which is to shutdown, it gives us like
this..
SQL> update obj$ set status=5 where type#=29 and owner#!=0;
1402 rows updated.
SQL> commit;
Commit complete.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORA-00604: error occurred at recursive SQL level 1
ORA-01219: database not open: queries allowed on fixed tables/views only
We tried to startup the database..it gives us this error..
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
So, we tried to shutdown again..
SQL> shutdown immediate
ORA-01089: immediate shutdown in progress - no operations are permitted
I been informed that this is maybe a Database problem related. Any ideas?
Best Wishes,
Rushdan Md Saad.

Patchsets could be obtained (only) from http://metalink.oracle.com
You need to have valid CSI for access.
P.S: Sorry Werner, I didn't see you post.
Message was edited by:
Ivan Kartik

Opatch error while applying Windows patch 6 (9.2.0.8.0) on EBS 11i Database

Hi,
I am upgrading our EBS 11i database (9.2.0.5.0) to 9.2.0.8.0 by following note : 216550.1 (Interoperability Notes Oracle Applications Release 11i with Oracle9i Release 2 (9.2.0)).
I have installed Opatch 2617419 and then installed 6880880 (p6880880_101000_WINNT.zip) (OUI patch).
While applying Windows patch 6 (5916268) ,using opatch I am getting the following error:
OPATCH_JAVA_ERROR=OPatch Exception while trying to check for Mini Patchset
Cannot check bug/file conflict and component prerequisite checks.
ERROR: OPatch failed during prerequisite check.
OPatch returns with error code = 150
Any help to resolve the issue is appreciated.
I saw note +'OPATCH_JAVA_ERROR=OPatch Exception While Trying to Check for Mini Patchset' while applying patch using opatch 1.0.0.0.x [ID 971783.1].+
There are no '&' in the inventory file. There are a lot of '<'. I dont know if this note is applicable.
Thanks
Thiru.

Hi,
I am following section 2 only.
In Section 2, # 7 we have to apply latest Oracle Patching Tool (OPatch) patch 2617419 and in # 8 we have to apply additional 9.2.0.8 RDBMS patches ( in our case it is Windows patch 6.
I am getting issue while applying Windows patch 6 using opatch.
Rgds,
Thiru

Oracle Database 10.2.0.3 CPU Patching

Hi
Could you please let me know that i can apply the latest CPU patch (7631956) directly on this oracle database version 10.2.0.3 on windows-32 bit or i have to start applying one by one old patches from two years back on wards?
Please find the opatch output given below:
D:\oracle\product\10.2.0\db_1\OPatch>opatch lsinventory
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : D:\oracle\product\10.2.0\db_1
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 10.2.0.3.0
OUI version : 10.2.0.3.0
OUI location : D:\oracle\product\10.2.0\db_1\oui
Log file location : D:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2010-
01-04_18-51-49PM.log
Lsinventory Output file location : D:\oracle\product\10.2.0\db_1\cfgtoollogs\opa
tch\lsinv\lsinventory2010-01-04_18-51-49PM.txt
Installed Top-level Products (2):
Oracle Database 10g 10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 2 10.2.0.3.0
There are 2 products installed in this Oracle Home.
Interim patches (2) :
Patch 5556081 : applied on Wed Dec 12 19:41:05 GMT 2007
Created on 9 Nov 2006, 22:20:50 hrs PST8PDT
Bugs fixed:
5556081
Patch 5557962 : applied on Wed Dec 12 19:40:57 GMT 2007
Created on 9 Nov 2006, 23:23:06 hrs PST8PDT
Bugs fixed:
4269423, 5557962, 5528974
OPatch succeeded.
Thank you!!!

Database CPU patches are cumulative. You only need to apply the latest.
http://www.oracle.com/technology/deploy/security/critical-patch-updates/cpuoct2009.html

Current Patch Set for Oracle Database Release 11.2

Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri

CPU patch July 2010 on Oracle 11.1.0.7 database

Hi,
I want to install the July2010 CPU patch (9655014) on a 11.1.0.7 database which was initially created with version 11.1.0.6.
The README file of the patch states the following about recompiling views:
3.2.2.2 Recompiling Views in the Database
You may skip this section if you have recompiled views for this database during the installation of a previous CPU or if the database was created with Release 11.1.0.6 or later.
So I assumed that I do not need to recompile the views but a little further in the README file I read:
If you want to check whether view recompilation has already been performed for the database, execute the following statement.
SELECT * FROM registry$history where ID = '6452863';
If the view recompilation has been performed, this statement returns one or more rows. If the view recompilation has not been performed, this statement returns no rows.
When I execute the select it returns no rows. So this is confusing. Should I perform a view recompilation or not?
And when I execute recompile_precheck_jan2008cpu.sql (strange name for a July 2010 CPU) it says:
SQL> @recompile_precheck_jan2008cpu.sql
Running precheck.sql...
Number of views to be recompiled :1969
Number of objects to be recompiled :4019
Please follow the README.txt instructions for running viewrecomp.sql
PL/SQL procedure successfully completed.
thanks in advance.
regards,
Ivan

Short answer: you dont need to run view_recompile_jan2008cpu.sql
Long answer:
>
SELECT * FROM registry$history where ID = '6452863';
If the view recompilation has been performed, this statement returns one or more rows. If the view recompilation has not been performed, this statement returns no rows.
When I execute the select it returns no rows. So this is confusing. Should I perform a view recompilation or not?
>
You will only get an entry in registry$history if you had a database that you had actually run the view_recompile_jan2008cpu.sql script which inserts a row into the table at the end of the script:
view_recompile_jan2008cpu.sql
Rem =======================================================================
Rem Insert values for patch into registry.
Rem =======================================================================
INSERT INTO registry$history (action_time, action, id, comments)
        values ( SYSTIMESTAMP, 'CPU', &&PATCH_NUMBER, '&&PATCH_DESC' );
COMMIT; In your case, you will get no entries in the table BUT you do not have to run the view recompilation so long as the database was created using a patched Oracle home of a release where Oracle says the view recompilation is not required.
>
SQL> @recompile_precheck_jan2008cpu.sql
Running precheck.sql...
Number of views to be recompiled :1969
>
This script has a very simple logic that just generates count of views and dependant objects that would need recompilation. The selection criteria does not include actually checking whether you actually need to apply the view recompilation script.
You can test this yourself:
Case#1: Run the recompile_precheck_jan2008cpu.sql on a database where you have applied the view recompilation script. You will find the count shows a non-zero value.
SQL> col action_time format a32
SQL> col version format a15
SQL> col version format a15
SQL> select action_time, version, id from registry$history where ID=6452863;
ACTION_TIME                      VERSION                 ID
24-JUL-10 12.52.15.390000 PM                        6452863
SQL> @recompile_precheck_jan2008cpu.sql
Running precheck.sql...
Number of views to be recompiled :1637
Number of objects to be recompiled :3487
Please follow the README.txt instructions for running viewrecomp.sql
PL/SQL procedure successfully completed.Case#2: Create a new database using a version that does not require the view recompilation patch. Run the recompile_precheck_jan2008cpu.sql. You will find the view count shows a non-zero value even though you do not need to recompile the views as mentioned in the Oracle patch notes.

10.1.0.4 patch set results in corrupted database

Hello!
I have installed database 10g and applied the 10.1.0.4 patch set to it. After the successfully completed installation tasks, I have proceeded to the post-installation tasks. I have set the initialization parameters successfully and everything was fine until I issued the STARTUP UPGRADE command and got ORA-01034 and Ora-27101 errors:
ORA-01034 ORACLE not available
ORA-27101 "Shared Memory Realm Does Not Exist"
I have tried suggestions posted here and on Metalink, but nothing worked. Since then I am just going in the circle trying different fixes. Should I recreate the Oracle service using ORADIM utility?
Any help is greatly appreciated.
Thanks,
Zrinka

Hi Andreas,
here is one of the trace files:
Dump file c:\oracle\db10g\rdbms\trace\db1_ora_1044.trc
Tue May 31 10:02:05 2005
ORACLE V10.1.0.4.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows 2000 Version V5.0 Service Pack 4
CPU : 1 - type 586
Process Affinity: 0x00000000
Memory (A/P) : PH:785M/1023M, PG:2313M/2462M, VA:1950M/2047M
Instance name: db1
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
1044
*** 2005-05-31 10:02:05.202
kstwlb: SGA is no longer mapped
Dump file c:\oracle\db10g\rdbms\trace\db1_ora_1044.trc
Wed Jun 01 07:53:54 2005
ORACLE V10.1.0.4.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows 2000 Version V5.0 Service Pack 4
CPU : 1 - type 586
Process Affinity: 0x00000000
Memory (A/P) : PH:778M/1023M, PG:2308M/2462M, VA:1950M/2047M
Instance name: db1
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
1044
*** 2005-06-01 07:53:54.526
kstwlb: SGA is no longer mapped
And the alert log:
Dump file c:\oracle\db10g\rdbms\trace\alert_db1.log
Fri Jun 03 15:00:32 2005
ORACLE V10.1.0.4.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Windows 2000 Version V5.0 Service Pack 4
CPU : 1 - type 586
Process Affinity: 0x00000000
Memory (A/P) : PH:584M/1023M, PG:2089M/2462M, VA:1950M/2047M
Fri Jun 03 15:00:32 2005
Errors in file c:\oracle\db10g\rdbms\trace\db1_ora_908.trc:
ORA-00600: internal error code, arguments: [733], [538969652], [pga heap], [], [], [], [], []
Fri Jun 03 15:03:00 2005
Shutting down instance (abort)
Fri Jun 03 15:03:52 2005
Errors in file c:\oracle\db10g\rdbms\trace\db1_ora_596.trc:
ORA-00600: internal error code, arguments: [733], [538969652], [pga heap], [], [], [], [], []
Fri Jun 03 15:05:11 2005
Shutting down instance (abort)
Dump file c:\oracle\db10g\rdbms\trace\alert_db1.log
Fri Jun 03 15:09:41 2005
ORACLE V10.1.0.4.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Windows 2000 Version V5.0 Service Pack 4
CPU : 1 - type 586
Process Affinity: 0x00000000
Memory (A/P) : PH:505M/1023M, PG:2018M/2462M, VA:1950M/2047M
Fri Jun 03 15:09:41 2005
Shutting down instance (abort)
Fri Jun 03 15:11:39 2005
Shutting down instance (abort)
Fri Jun 03 15:12:59 2005
Shutting down instance (abort)
Dump file c:\oracle\db10g\rdbms\trace\alert_db1.log
Fri Jun 03 15:17:13 2005
ORACLE V10.1.0.4.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Windows 2000 Version V5.0 Service Pack 4
CPU : 1 - type 586
Process Affinity: 0x00000000
Memory (A/P) : PH:508M/1023M, PG:2024M/2462M, VA:1950M/2047M
Fri Jun 03 15:17:13 2005
Shutting down instance (abort)
Fri Jun 03 15:21:46 2005
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
KCCDEBUG_LEVEL = 0
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
Dynamic strands is set to TRUE
Running with 1 shared and 18 private strand(s). Zero-copy redo is FALSE
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled

CPU patch procedure with physical and logical standby database in place

Hello All,
I've also placed this in the Upgrades forum, but perhaps this is the best place to have put it.
I'm trying to compile a decent set of steps for applying the CPUOCT2008 patch to our production RAC cluster which has both a logical and physical standby in place. I've read a tonne of documentation, including the CPU readme, DOCID 437276.1 and 278641.1. I''ve also read through the Upgrading Databases in a Data Guard Configuration chapter of Dataguard Concepts and Administration. The last doc mentioned is really for upgrading a full version of Oracle rather than applying a CPU (at least I think that's the case). DocID 437276.1 is rather sparse on details.
I guess what I'm trying to understand is the proper method for applying the patch with the logical standby in place. The physical standby looks pretty straightforward. After running opatch on it as well, it will basically have all of the changes applied to the primary shipped over and applied as per the normal primary/standby relationship. Will the same be true for the logical (having applied the patch, and then re-enabling SQL apply)? Should I aim to have it work that way? By that I mean start it up and re-enable sql apply and then upgrade the primary. Or, am I to apply the catcpu.sql script to it as well before re-enabling the sql apply? Am I wrong in regards to the physical standby as well i.e. should the catcpu also be applied directly to it?
Thanks very much in advance.
Cheers,
Chris
Edited by: chris.baron on Dec 12, 2008 11:38 AM

Given the fact that your system is far from main-stream I'd recommend opening an SR with Oracle Support Services (metalink) and asking them.
If you would like to publish a White Paper on your experience after you have successfully completed the project let me know off-line.

CMCOLL patch 4 hotfix 8 : database patch

Similar Messages

Maybe you are looking for