CMDTUX_CAT:754: ERROR: error processing configuration file

Hi Tuxedo Experts,
I have compiled and linked sample code tuxedo client and server (simpapp). According to README, the next steps is running tmboot -y command. Does it start the simpserv tuxedo server? If not, how do I start that?
Plus, when I ran this 'tmboot -y' command, I got the error:
===========================================
$ tmboot -y
tmboot: internal error: CMDTUX_CAT:754: ERROR: error processing configuration file
tmboot: internal error: CMDTUX_CAT:1360: ERROR: configuration file not found
===========================================
Would you please help me to resolve that.
Thanks & Regards,
Ahsan Asghar

Hi Ahsan,
You skipped some steps. One of the first steps is to set the environment variables given in the README. This is normally done by creating a script you can execute in the future, often called setenv.sh. After creating this script and executing like:
. ./setenv.sh
then you need to edit the sample UBBCONFIG file which for simpapp is called ubbsimple. This file contains the Tuxedo configuration information. You will need to replace the things in <> with ones appropriate for your system. The machine name should be the same as the output of the uname -n command.
Once you've edited the file, it needs to be compiled with the tmloadcf command. Then you should be able to boot and run your application.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Similar Messages

"Template import error: No VM configure file found" on brand new setup

Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
[2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
[2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
[2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
[2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
[2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
[2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
[2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
[2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
[2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
[2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
return func(*args)
File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
raise RuntimeError('Template import error: %s' % err)
RuntimeError: Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
[2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
[2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
[2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.

How did you get the template to where you staged it?
I'd say the template is corrupt or you only have a partial template.
I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name?

Please help--------------Error instantiating EM configuration files

I got the error that
"enterprise manager configuration failed due to the following error:
Error instantiating EM configuration files
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\orcl\emConfig.log for more details.
You can retry configuring this database with Enterprise Manager later by manually running C:\oracle\product\10.2.0\db_1\bin\emca script."
I ran the script manually but didnt work. Then I ran script emctl.bat and it gave me following errror:
Error: Environment variable ORACLE_SID not defined. Please define it.
Pls note that every thing was working fine two days ago. But suddenly I can not access EM. So uninstall Oracle, delete orale directory, reinstall oracle, but still got same problem. Can any one help? (I looked at some of the questions on EE already answered, but they didnt solve my problem either)
Note: OS is Window Vista

finally found solusion from web, let us share it:
http://www.scribd.com/doc/225225/Uninstalling-Oracle
because i did clean oracle completely. this is very common problem when you delete and reinstall oracle.
L

ERROR INSTALLING OC4J CONFIGURATION FILES

Hi,
Steps:
1. Downloaded Oracle11g Rel2 from download.oracle
2.Installed Software only option and completed installation on my laptop Windows7 ultimate. Selected Enterprise Version, unchecked OLAP,DATA MINING.
Error message during installation, some files missing .jar files. I have opted to ignore and continue and finally got success installation message.
3.Configured DB using DBCA.
4.Able to connect as SYS, SYSTEM.
Problem.
I tried to reconfigure DB using DBCA for OEM, received the msg
ERROR INSTALLING OC4J CONFIGURATION FILES. The summary error log is here. Appreciate any help.
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml (The system cannot find the file specified)
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml (The system cannot find the file specified)
CONFIG: Could not find or correctly parse file C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml in searching for tag web-site with attribute port
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml (The system cannot find the file specified)
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml (The system cannot find the file specified)
Mar 8, 2014 9:15:42 AM oracle.sysman.emcp.EMDBCConfig instantiateOC4JConfigFiles
CONFIG: Failed to set value in server.xml for application-server tag
Mar 8, 2014 9:15:42 AM oracle.sysman.emcp.EMConfig perform
oracle.sysman.emcp.exception.EMConfigException: Error instantiating OC4J configuration files
CONFIG: Could not find or correctly parse file C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml in searching for tag jms-server with attribute port
java.io.FileNotFoundException: C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml (The system cannot find the file specified)
CONFIG: Could not find or correctly parse file C:\app\Administrator\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml in searching for tag rmi-server with attribute port
thanks
Ram

Hi,
Seems you have not extracted downloaded zip files into same directory. In that case you get error like
java.io.FileNotFoundException:
/Disk2/database/stage/Components/oracle.rsf.hybrid/11.1.0.6.0/1/DataFiles/filegroup12.jar (A file or directory in the path name does not exist.)
java.io.FileNotFoundException:
/Disk2/database/stage/Components/oracle.rsf.hybrid/11.1.0.6.0/1/DataFiles/filegroup5.jar (A file or directory in the path name does not exist.)
Also after installation dbca will throw error.
Try the below
For AIX platform:
unzip in the same folder
$ mkdir 1120
$ mv aix.ppc64_11g_database_1of2.zip 1120
$ mv aix.ppc64_11g_database_2of2.zip 1120
$ cd 1120
$ unzip aix.ppc64_11g_database_1of2.zip
$ unzip aix.ppc64_11g_database_2of2.zip
$ cd database
$ ./runInstaller
This is true for all platforms on which you get two .zip files to download
For Windows 64 bit example on 11.2.0.1 you can do the following :
- create a directory C:\tmp\1120
- copy winx64_11g_database_1of2.zip and winx64_11g_database_2of2.zip under C:\tmp\1120
- unzip winx64_11g_database_1of2.zip and winx64_11g_database_2of2.zipunder C:\tmp\1120
Thanks,
Krishna

About the role of process configuration files

I have done some customizations in process template XMLs. I have done my major changes only in the work item type definition XMLs. I am wondering about the role of process configuration files or category definition files. When do I really need to update
it?
Thanks
Divya

Hi Divya,
Thanks for your post.
If you only did the changes on fields/controls in work item type, usually you needn’t update the process configuration and category files.
If you want add your work item type display in team project Web Access
Backlog board or Task board, you need to update the process configuration and category files, please refer to the detailed information in this document:
https://msdn.microsoft.com/en-us/library/jj920163.aspx.
Or you want add a backlog to portfolio management, you need to update the process configuration and category files, please refer to:
https://msdn.microsoft.com/en-us/library/dn217880.aspx.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Working with WebLogic81sp2 and getting error while processing a file.

Hi,
getting error while working with the weblogic81sp2 and java based application. In this m processing a file. the file gets processed but doing command 'ps -ef' shows process still running. The exception log is like:
<26-Mar-2008 10:10:48 o'clock GMT> <Warning> <WebLogicServer> <BEA-000337> <ExecuteThread: '21' for queue: 'weblogic.kernel.Default' has been busy for "645" seconds working on the request "Http Request: /shield/xml", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.>
<01-Apr-2008 06:50:00 o'clock BST> <Error> <HTTP> <BEA-101017> <[ServletContext(id=197633402,name=/shield,context-path=/shield)] Root cause of ServletException.
javax.servlet.jsp.JspException: Can't insert page '/jsp/layouts/mainLayout.jsp' : Broken pipe
at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.processException(Ljava.lang.Throwable;Ljava.lang.String;)V(InsertTag.java:956)
at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.doEndTag()I(InsertTag.java:884)
at org.apache.struts.taglib.tiles.InsertTag.doEndTag()I(InsertTag.java:473)
at jsp_servlet._jsp.__main._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(main.jsp:2)
at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(ServletStubImpl.java:305)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(RequestDispatcherImpl.java:301)
at org.apache.struts.action.RequestProcessor.doForward(Ljava.lang.String;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(RequestProcessor.java:1069)
at org.apache.struts.tiles.TilesRequestProcessor.doForward(Ljava.lang.String;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(TilesRequestProcessor.java:274)
at org.apache.struts.action.RequestProcessor.processForwardConfig(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;Lorg.apache.struts.config.ForwardConfig;)V(RequestProcessor.java:455)
at org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;Lorg.apache.struts.config.ForwardConfig;)V(TilesRequestProcessor.java:320)
at org.apache.struts.action.RequestProcessor.process(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(RequestProcessor.java:279)
at org.apache.struts.action.ActionServlet.process(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(ActionServlet.java:507)
Please help me!

Not sure why you want to replace. Since the response of the proxy would remain to hold the request body by default.
If you have stored the opaque element in a variable ($var_opaque), then you can do the following.
XPath : .
In variable : body
Expression : $var_opaque
Check - "Replace node content"

WCF-NET TCP Error when processing X12 file

Hi ,
Is it that WCF-NET TCP adapter only processes Xml file? I am trying to send x12 message through Send port wth Passthrough Pipeline and Net-Tcp configuration, but fails for invalid root node error: (below)
Send Port is subscribing to a Receive Port which has pass through on receive with File adapter ( I don't want to do EDI receive when receiving this file - just to convert it to Xml)
A message sent to adapter "WCF-NetTcp" on send port "port......._InputPassThru_snd" with URI "net.tcp://localhost:808/totemp" is suspended.
Error details: System.Xml.XmlException: Data at the root level is invalid. Line 1, position 1.
   at System.Xml.XmlTextReaderImpl.Throw(Exception e)
   at System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
   at System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace()
   at System.Xml.XmlTextReaderImpl.ParseDocumentContent()

The thing is, if you're using the WCF Net-TCP adapter, the receive is expecting a SOAP formatted message over TCP. The Net-TCP binding is 'binary' because there is no encoding layer, but the message is still SOAP.
If you really need to send binary data over TCP, you would use the BizTalk TCP/IP Adapter from CodePlex:
http://tcpipbz2010.codeplex.com/

Error in processing empty files

We have a requirement where in we the source system sends an empty file (xml,csv,txt) and XI shud process this file and send it to the target systems.
It is a file 2 file scenario we are using.
I have checked the option in the file adapter which says "process empty files"
I see the Error message displayed in the Abap stack Unable to read payload from the message object
Can some one point me how to process this empty file.
Thanks,
Nandini

Handling of Empty Files
Specify how empty files (length 0 bytes) are to be handled.
○       Do Not Create Message
No XI messages are created from empty files.
The files are processed according to the selected processing mode.
For example, if the processing mode is Delete, empty files are deleted in the source directory.
○       Process Empty Files
XI messages are created with an empty main payload.
The files are processed according to the selected processing mode.
○       Skip Empty Files
No XI messages are created from empty files.
Empty files are skipped and remain in the source directory.
These three options are available for handling empty files in XI SP 19 and PI SP 10 and above.
Select the option :Do Not Create Message"

Duplicate Records error when processing transaction file....BPC 7.0

Hi All,
I have a situation. I am using BPC NW 7.0 and I have updated my dimension files. When I try to validate my transaction file every single record is validated successfully. But when I try to import the flat file into my application, I am getting a lot of dupplication records error and these are my questions.
1. Will we get duplicate records in transaction files?
2. Even if there are duplication, since it is a cube it should summarize not display that as a error and reject records?
3. Is there something I can do to accept duplicates (I have checked the Replace option in the data package, to overwrite the simillar records, but it is only for account, category and entity only.
5. In mycase I see identical values in all my dimension and the $value is the only difference. Why is it not summing up.
Your quickest reply is much appreciated.
Thanks,
Alex.

Hi,
I have the same problem.
In my case the file that I want to upload has different row that differ for the nature column. In the conversion file I map different nature to one internal nature.
ES: cost1 --> cost
cost2 --> cost
cost3 --> cost
In my desire was that in BPC the nature cost assume the result cost = cost1 + cost2 + cost3.
The result is that only the first record is uploaded and all other recorda are rejected as duplicate.
Any suggestion?

Java Script Error in Processing PDF file with XML

I encounter the following error when I try to populate the pdf form with the values from an xml file.
Acrobat JavaScript Debugger Functions Version 9.0
Acrobat EScript Built-in Functions Version 9.0
Acrobat Annotations / Collaboration Built-in Functions Version 9.0
Acrobat Annotations / Collaboration Built-in Wizard Functions Version 9.0
Acrobat SOAP 9.0
trustedImportXFAData is not defined
1:External:ExecException in line 1 of function top_level, script External:Exec
trustedImportXFAData is not defined
1:External:Exec

I bind the form's fields with schema and not xml instance.
Then I add a button in the form itself and called this method for mouse click event.
xfa.host.importData("c:\epcis_4_dec\EPCIS02.02.00%105040504%aa%01.00%01.00%05cc12af-fbfa-4 0d6-b644-e44fcaaad44e.xml");
I get the following error. What could it be? It is almost the same error as when I call the trustedFunction.
I have been struggling to solve this issue for weeks. The whole idea is to get the forms dynamically filled with the values from xml file.
Pleas help :(
Acrobat JavaScript Debugger Functions Version 9.0
Acrobat EScript Built-in Functions Version 9.0
Acrobat Annotations / Collaboration Built-in Functions Version 9.0
Acrobat Annotations / Collaboration Built-in Wizard Functions Version 9.0
Acrobat SOAP 9.0
unterminated string literal
21:Folder-Level:App:trustedImportXFAData.jsException in line 1 of function top_level, script XFA:EPCISDocument[0]:#subform[0]:Button1[0]:click
NotAllowedError: Security settings prevent access to this property or method.
Doc.importXFAData:-1:XFA:EPCISDocument[0]:#subform[0]:Button1[0]:click
Exception in line 1 of function top_level, script XFA:EPCISDocument[0]:#subform[0]:Button1[0]:click
NotAllowedError: Security settings prevent access to this property or method.
Doc.importXFAData:-1:XFA:EPCISDocument[0]:#subform[0]:Button1[0]:click

Error while processing csv file

Hi,
i get this messages while processing a csv file to load the content to database,
[SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL;
data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
[SSIS.Pipeline] Warning: The output column "Copy of Column 13" (842) on output "Data Conversion Output" (798) and component
"Data Conversion" (796) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
can someone please me with this.
With Regards
litu Here

Hello Litu,
Are you using: OLEDB Source and Destination ?
Can you change the source and destination provider to ADO.NET and check if the issue still persist?
Mark this post as "Answered" if this addresses your question.
Regards,
Don Rohan [MSFT]
Regards, Don Rohan [MSFT]

Enterprise manager configuration error: error instantiating OC4J Files

Good day to all.
Its my first time to install Oracle 11g on my Windows 7 computer.
After i installed and configured the database, i get this following error , so i can't go through the Enterprise Manager.
Enterprise Manager Configuration failed due to the following error - Error instantiating OC4J Configuration files
So i checked the emConfig.log for error details, and i found out that i have some several files missing, in which i checked the folder also.
I don't know why these files are missing.
Jun 5, 2012 4:32:53 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml in searching for tag jms-server with attribute port
java.io.FileNotFoundException: C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at java.io.FileInputStream.<init>(FileInputStream.java:66)
     at java.io.FileReader.<init>(FileReader.java:41)
     at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:296)
     at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1297)
Jun 5, 2012 4:32:53 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml in searching for tag rmi-server with attribute port
java.io.FileNotFoundException: C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
Jun 5, 2012 4:32:53 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml in searching for tag web-site with attribute port
java.io.FileNotFoundException: C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
Jun 5, 2012 4:33:57 PM oracle.sysman.emcp.util.FileUtil setAttributeInXML
CONFIG: Stack Trace:
java.io.FileNotFoundException: C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
Jun 5, 2012 4:33:57 PM oracle.sysman.emcp.EMDBCConfig instantiateOC4JConfigFiles
CONFIG: Failed to set value in server.xml for application-server tag
Jun 5, 2012 4:33:57 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating OC4J configuration files
Refer to the log file at C:\app\ROMMEL\cfgtoollogs\dbca\RommelDB\emConfig.log for more details.
Jun 5, 2012 4:33:57 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error instantiating OC4J configuration files
     at oracle.sysman.emcp.EMDBCConfig.performConfiguration(EMDBCConfig.java:427)
     at oracle.sysman.emcp.EMDBCConfig.invoke(EMDBCConfig.java:174)
IT seems that the folder OC4J_DBConsole\config\ does not contain any xml files.!
Prior to this, i get some files that are not found error when running the SETUP, there are several of them, i just pressed CONTINUE in
order to finish the installation.
Hope anyone can give me a good advice and help so that i can start to run Enterprise Manager and to learn how to get around with database creation and configuration
Im a total newbie in Oracle, so any help would be greatly appreciated.
Thank you very much.

Hello.
I have successfully installed Microsoft Loopback adapter.
I checked out the installation logs in the Logs directory, i can the error log (oraInstall2012-06-05_12-36-49PM.err) . which contains many errors:
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup12.jar (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup12.jar (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup5.jar (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup5.jar (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup19.jar (The system cannot find the path specified)
AND lots of .jar and .rsf files missing.
What should i do next?
Thank you.

Suggestion needed for processing Big Files in Oracle B2B

Hi,
We are doing a feasibility study for Using Oracle AS Integration B2B over TIBCO. We are presently using TIBCO for our B2B transactions. Now since my client company planning to Implement Fusion Middleware (Oracle ESB and Oracle BPEL), we are also looking at Oracle AS Integration B2B for B2B transactions (On other words we are planning to replace TIBCO by Oracle Integration B2B if possible).
I am really concern about one thing that is receiving and processing any "BIG FILE" (15 MB of size) from trading partner.
Present Scenario: One of our trading partner is sending Invoice documents in a single file and that file size can grow upto 15 MB of size. In our existing scenario when we receive such big files from trading partner (through TIBCO Business Connect - BC), Tibco BC works fine for 1 or 2 files but it crashes once it received multiple files of such size. What exactly happening is Whatever Memory that TIBCO BC is consuming to receive one such big file, are not getting released after processing and as a result TIBCO BC throws "OUT OF MEMORY" error after processing some files.
My questions:
     1. How robust the Oracle AS Integration B2B is, in terms of processing such big files?
     2. Is there any upper limit in terms of size that Oracle AS Integration B2B can handle for receiving and processing data?
     3. What is the average time required to receive and process such big file? (Lets say we are talking about 15MB of size).
     4. Is there any documentation availble that talks about any such big files through Oracle B2B?
Please let me know if you need more information.
Thanks in advance.
Regards,
--Kaushik

Hi Ramesh,
Thanks for your comment. We will try to do POC ASAP. I will definitely keep in touch with you during this.
Thanks bunch.
Regards,
--Kaushik

Cannot write configuration file

Hello,
I have a problem loading up a project I have taken over from some one else. I need some guidance as I can't seem to find the solution. However im not that familiar with .NET or MVS as I once
was. The message I get is as follows :-
Microsoft Visual Studio
Creation of the virtual directory localhost:49623/ failed with the error: Filename: \\?\C:\Users\firstname.surname\Documents\IISExpress\config\applicationHost.config
Error: Cannot write configuration file
However I have checked the permissions and can't see anything obvious. Under guidance from another developer I have also updated :-
www.nuget.org/
and
www.nuget.org/packages/Microsoft.AspNet.Mvc
I am using a Windows 7 enterprise edition Dell Lattitude laptop. With MVS as follows
Microsoft Visual Studio Professional 2012
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.50938
Installed Version: Professional
Microsoft Visual Studio Tools for Applications 2012   04938-088-1153812-02395
Microsoft Visual Studio Tools for Applications 2012
Office Developer Tools   04938-088-1153812-02395
Microsoft Office Developer Tools
Team Explorer for Visual Studio 2012   04938-088-1153812-02395
Microsoft Team Explorer for Visual Studio 2012
Visual Basic 2012   04938-088-1153812-02395
Microsoft Visual Basic 2012
Visual C# 2012   04938-088-1153812-02395
Microsoft Visual C# 2012
Visual C++ 2012   04938-088-1153812-02395
Microsoft Visual C++ 2012
Visual F# 2012   04938-088-1153812-02395
Microsoft Visual F# 2012
Visual Studio 2012 Code Analysis Spell Checker   04938-088-1153812-02395
Microsoft® Visual Studio® 2012 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V.
All rights reserved.
Visual Studio 2012 SharePoint Developer Tools   04938-088-1153812-02395
Microsoft Visual Studio 2012 SharePoint Developer Tools
NuGet Package Manager   2.8.60318.667
NuGet Package Manager in Visual Studio. For more information about NuGet, visit docs.nuget.org/.
PreEmptive Analytics Visualizer   1.0
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 11.0.5058.0
SQL Server Data Tools   11.1.20627.00
Microsoft SQL Server Data Tools
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 11.0.3436.0
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 11.0.3436.0
Web Developer Tools   1.0.30710.0
Microsoft Web Developer Tools contains the following components:
Page Inspector: Tool that offers an efficient way to decompose Web Applications and diagnose front-end issues.
Web Publishing: Extensions required for Web Publishing for both hosted servers as well as on premises.
Web Form Templates: Includes the default templates for Web Form Applications.
Editor Extensions: Includes HTML, CSS, and JS editor extensions that greatly enhance the development experience.

I see some others have had success by removing encryption on the IISExpress folder and removing the Read Only attribute as well.
See this post for details.
Others have had success by doing the following:
- Run Command Prompt (cmd) in Admin Mode
- Enter the following command: DISM /Online /Cleanup-image /Restorehealth
...as detailed here.

No configuration files exist for this connector?

I am trying to install Oracle Application Table connector for that I have copied the all files/directory into ConnectorDefaultDirectory but still getting following error.
No configuration files exist for this connector.
Ensure that valid configuration XML files exist in the configuration directory.
Any help?
thanks
TK

I have server/ConnectorDefaultDirectory and when I unzipped the TableResource zip inside ConnectorDefaultDirectory ...... it created following folders
1. configuration (This folder contains DatabaseApplicationTables-CI.xml)
2. documentation
3. lib
4. ProviderDefinitions
5. resources
6. targetsystems-lib
Can you please let me know what should be configuration file name?
I have downloaded these zip files from following location
http://www.oracle.com/technetwork/middleware/id-mgmt/downloads/connectors-101674.html
thanks for your help
TK

CMDTUX_CAT:754: ERROR: error processing configuration file

Similar Messages

Maybe you are looking for