CMIS Connector Thumbnails Not Shown In Bridge

Dear Sir/Madam,
We have a CMIS interface to our database and are using it with Adobe Drive 4. The Bridge does not show thumbnails for the assets in the database. I have tried connecting to a different CMIS repository (Alfresco's) and thumbnails are not shown there either.
Can the bridge show thumbnails of assets accessed via the CMIS connector? If not could it be enhanced to do so? We support the cmis:thumbnail rendition (and a few others) that could be used.
Kind regards,
Ian

Hi,
Can you please try:
1. Install the latest Bridge build by installing latest Photoshop build
2. Remove the folder /Users/[username]/Library/Application Support/Adobe/Common/Media Cache
3. Launch Bridge and purge cache of the MOV files.
Please tell me whether the issue is still there.
Thanks!
Best Regards,
Bridge QE
Chun Xia

Similar Messages

NEF Thumbnails not displaying in Bridge CS3

I decided to dip my toe into RAW images. However unlike jpegs and tiffs the NEF thumbnails are not rendering in Bridge CS3. However when I double-click on an unrendered thumbnail it does open normally. As seeing thumbnails would be very helpful I decided to do a software update to see if this would cure the problem. During the install process I got the following message - Installation Incomplete - The Updater is unable to locate the product to be updated - Adobe Camera Raw 4.6 Update failed to install.
Outcome - NEF thumbnails still not rendering. By the way my NEF images were produced on a Nikon D60.
Help would be appreciated. Thanks in anticipation. Victor Patterson, Ireland

This is the Photoshop Elements forum.
Sounds like you need the ACR or Photoshop or Bridge fora. select from this link:-
http://forums.adobe.com/community/photoshop?view=overview
It may be worth starting with this link:-
http://kb2.adobe.com/cps/407/kb407110.html

RAW thumbnails not visible in Bridge CS4

Well, first of all, forgive me, because I'm VERY behind the times :~) I can't afford to be up to date :~( Also forgive me if I do not use the correct terminology :~)
I just started taking photos in RAW with my Canon G11 and was not able to open them in PS CS4. So I found a thread here and downloaded the update, which fixed that problem. Whew!
Now the problem is that the Thumbnails do not display in Bridge CS4~~just a CR2 icon. Would anyone care to venture a guess as to why that is? Memory? I have a three year old iMac with only 2 GB of RAM, but am planning on installing 4GB as soon as I have time.
Anyway, any thoughts will be appreciated.
Elaine

Elaine,
In Bridge, go to the Tools menu and Purge the Cache for the offending folder(s).
DO NOT use the global Purge Cache command in Bridge Preferences.
Wo Tai Lao Le
我太老了

.mov thumbnails not displaying in Bridge CC

My .mov file thumbnails do not display in Bridge CC. It worked previously with CS6. Mac Operating system 10.6.8
Tried purging cache without any luck. Any suggestions.

Still waiting on and answer for this. Has anyone found a fix? I can view my .mov thumbnails in Bridge CS6 but not CC. I have all the latest Adobe and Mac OS X 10.10.2 and QT updates. I've removed the media cache folder and purged my cache - every possible fix I've seen on the internets and still, not thumbnails for .mov files in Bridge CC. I'm working on an important video project for a client and this is the first video assignment I've worked on with CC and so far, it's not working out well.

Raw and TIFF Thumbnails Not Showing in Bridge CS4

Hi,
I just bought Photoshop CS4 and installed. I got an installation error and had to remove and reinstall CS4 (and ran the Mac Cleanup Utility in between). Then, CS4 installed successfully.
Now, when I fire up Bridge CS4, I can preview JPG files, but not TIFF or RAW (*.NEF format from my D200) files.
Has this happened to anyone else and is there a fix I can apply? I have installed known updates for CS4 and have purged the cache.
I have tried searching adobe and the online communities for this issue, but haven't been able to locate it. The problem also applies to *.PSD documents. I have also tried Tools>Cache>Purge Cach for Folder xxx and this doesn't fix things.
Thanks in advance for your advice!!!
Brandon

Just found that exchange with Ian. It apparently was milder than I remember, so it has not been deleted:
http://forums.adobe.com/message/1208904#1208904
and
http://forums.adobe.com/message/1208905#1208905
                                    64.
                                Mar 2, 2009 9:37 PM
in response to:                                     (Tom_Hogarty)
                                Re: Camera Raw 5.2 and DNG Converter Available - Note from Adobe
                                Ian,
OK, I'm back already.
The bug was easily and instantly reproduced just as I wrote earlier:
With one of the lines under the thumbnails (thumbnail view in
Bridge) set to date created, and the other three to Date Modified,
Pixel Dimensions and Color Profile, respectively. I then invoked the
Global Purge cache command in Bridge CS4. Poof! The date created line
under each and every thumbnail is now blank. The space for the line is there, but it's totally empty,
blank. >:(
Invoking
Tools > Cache > Build and Export Cache > for all folders and subfolders restores the data in the blanked lines wiped out by the global Purge Cache command in Bridge preferences.
Thank goodness I had disconnected the FW drives.
I then went again and repeated the procedure one more time. The
Date Created line was again immediately left blank under all
thumbnails.
As far as I'm concerned,
the Global Purge cache command in Bridge Preferences in CS4 is broken
, just as it was in CS3 at least until someone tells me how to stop this from happening, reliably and consistently.
Tiger 10.4.11. Dual bootable, DP MDD 1.25GHz G4 (2004),
maxed out at 2GB of RAM, both Spotlight and Dashboard disabled,
Photoshop primary scratch disk on dedicated 160GB internal drive, at
least 100GB available on each of the four internal drives, up to 300GB
on some. Counting external FW drives just over 1TB of drive space
available. nVidia GeForce 7800 GS 425MHz 256 MB graphics display card.
Processor napping enabled through CHUD 3.5.2.
and
                                    65.
                                Mar 2, 2009 9:50 PM
in response to:                                     (Tom_Hogarty)
                                Re: Camera Raw 5.2 and DNG Converter Available - Note from Adobe
                                Oh, shingles! >:(
I just reconnected my FireWire drive and, to my utter disgust and
horror, the Date Created was wiped out under who knows how many
thousands of images. >:( This despite having unmounted, disconnected
and turned off the FW drive, and despite having my Bridge Preferences
> Cache > Options > set to A
utomatically Export Cache To Folders When Possible.
I'm one
very
unhappy camper, Ian. >:(
finally:
                                    66.
                                Mar 2, 2009 11:20 PM
in response to:                                     (Tom_Hogarty)
                                Re: Camera Raw 5.2 and DNG Converter Available - Note from Adobe
                                At
11:12pm, one hour and twenty minutes later (grrrrrrrrrr! >:(),
Bridge has finally rebuilt the cache for every darned file on my FW
drive, restoring through the Tools > Cache > Build and Export Cache > for all folders and subfolders command the blank
Date Created line under each file that the global Purge Command in Bridge Preferences had wiped out.
Ian, I won't trust you next time. :/*
* [emphasis added]
                                    67.
                                Mar 3, 2009 1:39 AM
in response to:                                     (Tom_Hogarty)
                                Re: Camera Raw 5.2 and DNG Converter Available - Note from Adobe
                                Actually, I just thought Bridge had finished. It was still going in the background after midnight. What a bummer!

Photo thumbnails not shown in Mac Photos

I have started using the new Photos for Mac and have migrated my aperture photo library but have run into problems. When I go to "All Photos" in the side bar, a lot of thumbnails are missing. If I click on one of the missing thumbnails, the photo will be shown but when I go back to All Photos, the thumbnail still doesn't get shown.
Anyone give a solution to this ?
Thank you.

Welcome to the forum.
It sounds as though the Mac is not seeing the ROM Content on your disc. I wonder if the file naming convention (most often, the file extensions are not used on the Mac, but a "finder" file is used instead) is getting in the way. As I am a dyed-in-the-wool PC-user, I cannot tell you what the Mac-fix will be, but I will bet that Mac users, who do ROM content can.
It might well be that rather than use Encore for the full production, including the ROM Content, you will need to do the authoring in Encore, Burn to Folder, construct the folder with both Mac & PC content (maybe two different folders?), and then use a program like the great, free burning utility, ImgBurn, to burn the VIDEO_TS folder (and files), and then the ROM content.
This is just a guess, but I've had content on discs disappear if I have MacDrive (a PC utility for reading and using Mac content) running and insert a PC DVD/CD. I would guess that similar might happen with PC ROM Content and it's viewed on a Mac.
Good luck, and hope that a Mac user will chime in to tell us if I am correct, or totally wrong.
Hunt

TIFF Thumbnails Not Showing in Bridge CS4

Hi. I just reinstalled PS CS4 (after system crash). Now I can not see TIFF thumbnails in Bridge (neither RAW but I use LR). I unistalled once with ACR 5.5 upgrade and reinstalled again from scratch and the problem persists. Nevertheless I can see TIF thumnail from Windows Vista Explorer. I also tried to access the Bridge Cache location and seems to be unavailable, even after 2nd installation. I tried to Purge Cache but nothing works. Any help? Thanks

Hi curt y:
When you say you try to purge the cache and "nothing works" what does this mean?
The program does not seem to do anything
When I look at the Preference/Thumbnail THERE IS NO PLACE FOR THUMBNAILS. I detected this before but I don't
know how to assign a place not even a default place apears there.
If you go to tools/cache/purge cache for xx folder does this work? Your thumbs should blank out and rebuild.
Nothing happens!!
I know I have to solve the thumbnail location issue, the problem is I don't know how!!

Bug: MOV thumbnails not rendering in Bridge

Bridge CS6 is failing to render the thumbnails of my iPod videos in the Content panel although Bridge CS5 does so handily.
- Use APD to download images from iPod Touch, 4th gen
- Bridge opens to new directory
Generic thumbnails appear is CS6 where a representative image appears in CS5
I expect Bridge to display a thumbnail of the initial frame of the video instead of a generic icon.
Mac OS v10.6
Cheers
-Saïd

Hi,
Can you please try:
1. Install the latest Bridge build by installing latest Photoshop build
2. Remove the folder /Users/[username]/Library/Application Support/Adobe/Common/Media Cache
3. Launch Bridge and purge cache of the MOV files.
Please tell me whether the issue is still there.
Thanks!
Best Regards,
Bridge QE
Chun Xia

Thumbnails not shown on Facebook

When I log into my Facebook account using FireFox it does not show the thumbnail of pictures or videos posted by others. However ie and Chrome are perfectly fine.

See:
* [[Images or animations do not show]]
* http://kb.mozillazine.org/Images_or_animations_do_not_load
*A way to see which images are blocked is to click the favicon ([[Site Identity Button]]) on the left end of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

Developing: Endless loop in Adobe Bridge with and Adobe Drive CMIS Connector

Hi
Currently I’m implementing a CMIS-Server for the dam system of my company, using the apache chemistry framework. One of the main requirements is that adobe drive works with it.
At the moment I implemented only the navigation services (getChildren, getObject, …) and the repository services and test them against adobe drive. It’s already possible to navigate through folders and read assets with ad4 and the finder. So 3 days ago I installed adobe bridge (CS6) and test my server again.
My test environment is very easy.
root(1 object)->test1(0 objects; empty)
First I’m opening my repository with adobe drive and then I switch to bridge and connect it. Bridge shows me the folder test1 with no errors. So I double-click it and now bridge is in an endless loop. The notification switch between ‘Keine anzuzeigenden Elemente’(No elements to show) and ‘Einen Moment bitte, die Suche läuft …’(Searching, please wait …). This only happens in bridge. When I open the folder with the finder it just works, without the loop.
So I logged all requests, which were send by adobe drive, and get this list.
Connecting with adobe drive
getRepositoryInfos
getTypeChildren (null) -> all basetypes
getTypeDecendants (cmis:document)
getTypeChildren (null) -> all basetypes (Why two times?)
getTypeDecendants (cmis:document) (Why two times?)
getRepositoryInfos (Why two times?)
getObjectByPath (/.hidden)
getObjectByPath (/.hidden)
getObjectByPath (/.hidden) (Why so often?)
getObjectByPath (/DCIM)
getObjectByPath (/mach_kernel)
getObjectByPath (/.Spotlight-V100)
getObjectByPath (/.metadata_never_index)
getObjectByPath (/.metadata_never_index_unless_rootfs)
getObjectByPath (/.metadata_never_index)
getObjectByPath (/mach_kernel)
getObjectByPath (/.metadata_never_index_unless_rootfs)
getChildren (cmis:folder,0) (rootfolder) returning only one element (test1)
getObjectParents(cmis:folder,127) (test1) returning the rootfolder
getObjectByPath (/.hidden)
getObjectByPath (/mach_kernel) …
Open the Cmis repository in bridge and doubleclick the repository
getChildren (cmis:folder,0) (rootfolder) returning only one element (test1)
getObjectParents(cmis:folder,127) (test1) returning the rootfolder
Then I double click the test1 folder
getObject(cmis:folder,127)(test1)
getChildren(cmis:folder,127) -> empty list
… (endless loop)
I already checked getObject and getChildren against a reference implementation (FileShare Repository of apache Chemistry) and it returns exactly the same structure. Only the name and the timestamps are different. So my second though was to check the repository capabilities and as well they are both equal. Now I’m a little bit desperate because I spend already 3 days in try and error bugfixing but nothing worked. So here are my questions.
Is there a logfile for bridge because I thing this refreshing happens after an exception. I already checked the adobe drive log and it contains only asset not found errors for (e.g mach_kernel …).
In which circumstances does bridge reloads a folder?
Debugging of adobe drive: I already read http://forums.adobe.com/message/3928595 but it doesn’t work in AD4 any more, I only get info/error/fatal messages.(I changed the log4j config files in AD4ServiceManager.) Does something changed or did I forget something?
Why does AD4 make 2 or more times the exact same request? (Look table above).
I hope my English is good enough to understand.
Thanks

After two months I'm a little bit smarter so I can answer some of my question by my own.
No there is no logfile for bridge, but I was able to debug the scriptcode from the ad plugin, which is installed in bridge.
If an error occures in the plugin
I was able to decompile the cmis connector. That helps a lot when ad logs with weird exceptions.
Because AD maps the actions of the filebrowser(finder,explorer) to cmis and this one does sometimes the exact action two or more times.
Unfortunately is wasn't able to fix my main problem, but I found a workaround to use cmis in bridge. I deactivated the ad plugin in bridge and after that action, bride display the cmis volume as normal volume. Sadly some actions like to manage relationships etc. are with this workaround not usable but for me this is alright.

Why are the DNG Thumbnails of my Sony DRC RX100 not shown in the File Finder of my Mac?

When I first import the original RAWs from my Sony DRC RX100, I can see the thumbnails in the File Finder (so my Mac with OSX 10.9.1. is perfectly fine), but after reworking them with Lightroom and exporting them as DNG files, the pictures are not shown any more as thumbnails in the file finder, but as empty white boxes. The curious thing is that the RAW pictures shooted with my Nikon D5200 do not have any visualization problem after exporting them from Lightroom. The problem is very disgusting, as I can not search for pictures in the file finder. And Adobe did just close my open request on this issue (case #0180632682) without my consent and without any solution! Who else has got this problem and knows if there is any help to this stupid phenomenon? Does anyone at Adobe take care at all?
Thanks!
Tinero

I think that this is a Lightroom problem because the original Raw files from the camera card are shown as thumbnails in the file finder, but after importing them into Lightroom as dng, retouching them and exporting them with Lightroom, the files are not shown any more. Obviously my sony RX100 camera is not the problem, at least not for my Mac. As Lightroom always needs to work together with a windows PC or a Mac, Adobe should ensure the compatibility of the functions with the host system. I think that is what all consumers logically expect from Lightroom. And a photography SW should be able to show fotos and export visible foto files...
The very same Dng files from my other camera (a Nikon d5200) do not have this problem at all, although I export them in the very same format as the pics from my Sony, which is not at all an exotic camera. This is very confusing.
I export dng files because this is the Lightroom own raw format that keeps the original quality of my raws. TIFF files are too large, and jpegs sensibly reduce the quality. So there is no option. I need to stay in Raw. Do I have any other quality options?

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

Argh - once again, I find my solution right after posting this. Left out one modification to the SWIG script, now it runs in 29 seconds vs C 16 seconds, I can live with that.

Nikon Df Nef File Thumbnails not showing in Adobe Bridge CS5

HI,
I am having trouble getting NEF thumbnail to show in Bridge CS5, but only from the Nikon Df. All other, older, NEF files are showing up without a problem
I have installed the latest updates (Camera Raw etc)
I would appreciate any advice on getting this to happen.
Thanks
BD

Ok thanks for that, at least I wont be chasing my tail.
I did install the DNG converter 8.3 but I still NEF files as a NEF icon. Any clues to what I may not be doing right there?

Canon 6D, Bridge CS5, Camera raw 6.7.1 -- cr2 files not shown

I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?

Frau S aus B wrote:
I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?
The Canon 6D id NOT supported by ACR 6.7.1. It was supported for the very first time in ACR 7.3 whch requires CS6 to run.
Therefore you will never be able to open raw CR2 files from the 6D directly in CS5.
If you do not plan on upgrading, you can download the free, stand-alone Adobe DNG Converter 8.3 (always use the latest version, it's not tied to your version of Photoshop at all), install it like any other application and then run it on each batch of CR2 files to convert them to raw DNG files that you can then open in your version of Photoshop and ACR.

My .mov file thumbnails do not display in Bridge CC.

My .mov file thumbnails do not display in Bridge CC. It worked previously with CS6. Mac Operating system 10.6.8
Tried purging cache without any luck. Any suggestions.

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/bridge

CMIS Connector Thumbnails Not Shown In Bridge

Similar Messages

Maybe you are looking for