CMS server stuck at "Starting" status
CMS server stuck at "Starting" status. I cannot stop it and cannot restart it. I even rebooted the NT box several times and it didn't help. Any suggestions? I am running BO XI R2 on Windows NT box.
The message from Events Viewer is: CMS is unstable and will shut down immediately. Reason: Database access error. Reason ORA-24369: required callbacks not registered for one or more bind handles
Edited by: Michael Burgoyne on Jun 4, 2009 5:50 PM
Here is the meaning of the error :
ORA-24369:
required callbacks not registered for one or more bind handles
Cause: No callbacks have been registered for one or more of the bind handles which are part of the
RETURNING clause.
Action: The bind handles which are to receive data in a DML statememt with a RETURNING clause must have their mode set as DATA_AT_EXEC and callback functions must be registered for these bind handles using OCIBindDynamic.
It sounds to me that when DB was moved from one server to another CMS DB was either corrupted or not migrated properly or new DB has different settings compared to original.
This is definately on the DB side.
How exactly this move was accomplished ?
How was R2 system repointed to new DB location ?
Do you still have original "pre-move" CMS DB ?
Similar Messages
-
Managed Server stuck in starting
Hi every, thank you for reading.
We have a Oracle SOA domain running on WLS 10.3.6. The OS is windows server 2003.
Adminserver and soa_server1 are on vmmachine1.
proxy server and soa_server2 are on vmmachine2.
soa_server1 and soa_server2 are in a cluster.
This domain has been working normally for serveral months. Managed server is controlled by nodemanager.
Yesterday, we increased the memory of vmmachine1 and vmmachine2 from 8g to 16g.
After that, soa_server2 cannot be started while other managed server of the domain starts normally.
I looked into the soa_server2.log and found that the log stucks at "<Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\ctst_soa_domain\servers\soa_server2\logs\soa_server2.log is opened. All server side log events will be written to this file.> " forever.
The task manager shows that the memory of java.exe process of the stucked managed server is about 350m and at an increase rate of about 4k.
The cpu consumption of the process is 0 percent.
Below is part of JRockit Mission Control fly record event of the stucked JVM:
1,359,447,962,480,625,883 4,453,053,500 weblogic.timers.TimerThread Java Wait
1,359,447,962,480,688,068 4,453,037,334 [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' Java Wait
1,359,447,962,558,579,199 109,474,384 VDE Transaction Processor Thread Java Wait
1,359,447,962,564,083,662 869,606,634 RMI TCP Connection(26)-192.9.200.148 Socket Read
1,359,447,962,668,068,530 109,075,316 VDE Transaction Processor Thread Java Wait
1,359,447,962,777,159,184 109,367,902 VDE Transaction Processor Thread Java Wait
1,359,447,962,886,542,218 109,638,015 VDE Transaction Processor Thread Java Wait
1,359,447,962,996,257,842 109,285,831 VDE Transaction Processor Thread Java Wait
1,359,447,963,105,558,278 109,143,508 VDE Transaction Processor Thread Java Wait
1,359,447,963,214,709,536 109,312,043 VDE Transaction Processor Thread Java Wait
1,359,447,963,324,052,457 109,455,297 VDE Transaction Processor Thread Java Wait
1,359,447,963,433,516,028 109,259,502 VDE Transaction Processor Thread Java Wait
1,359,447,963,433,924,695 93,414,304 RMI TCP Connection(26)-192.9.200.148 Socket Read
1,359,447,963,527,635,047 2,515,422,874 RMI TCP Connection(26)-192.9.200.148 Socket Read
1,359,447,963,542,789,729 152,068,282 VDE Transaction Processor Thread Java Wait
1,359,447,963,694,879,147 113,581,233 VDE Transaction Processor Thread Java Wait
1,359,447,963,697,060,581 1,002,528,122 RMI TCP Connection(idle) Socket Read
1,359,447,963,808,488,263 109,555,192 VDE Transaction Processor Thread Java Wait
1,359,447,963,918,076,105 109,076,613 VDE Transaction Processor Thread Java Wait
1,359,447,964,027,167,650 109,358,282 VDE Transaction Processor Thread Java Wait
1,359,447,964,136,541,541 109,442,748 VDE Transaction Processor Thread Java Wait
1,359,447,964,245,999,192 109,830,184 VDE Transaction Processor Thread Java Wait
1,359,447,964,324,342,462 2,015,390,696 Timer-1 Java Wait
1,359,447,964,355,844,714 108,827,865 VDE Transaction Processor Thread Java Wait
1,359,447,964,464,687,365 109,297,368 VDE Transaction Processor Thread Java Wait
1,359,447,964,574,003,355 109,396,656 VDE Transaction Processor Thread Java Wait
1,359,447,964,683,418,068 109,366,571 VDE Transaction Processor Thread Java Wait
1,359,447,964,705,600,116 743,862,091 RMI TCP Connection(idle) Socket Read
1,359,447,964,792,799,741 109,347,456 VDE Transaction Processor Thread Java Wait
1,359,447,964,902,156,236 109,395,625 VDE Transaction Processor Thread Java Wait
1,359,447,965,011,567,244 109,331,778 VDE Transaction Processor Thread Java Wait
1,359,447,965,120,914,342 109,367,906 VDE Transaction Processor Thread Java Wait
1,359,447,965,230,297,996 109,602,297 VDE Transaction Processor Thread Java Wait
1,359,447,965,339,915,098 109,369,203 VDE Transaction Processor Thread Java Wait
1,359,447,965,449,297,323 109,126,121 VDE Transaction Processor Thread Java Wait
1,359,447,965,449,946,395 265,099,402 RMI TCP Connection(idle) Socket Read
1,359,447,965,558,468,725 109,441,305 VDE Transaction Processor Thread Java Wait
1,359,447,965,667,925,444 109,229,624 VDE Transaction Processor Thread Java Wait
1,359,447,965,720,533,365 322,363,229 RMI TCP Connection(idle) Socket Read
1,359,447,965,777,169,428 109,580,914 VDE Transaction Processor Thread Java Wait
1,359,447,965,886,766,019 109,140,868 VDE Transaction Processor Thread Java Wait
Any help is welcome.Thread Dump:
"Main Thread" id=1 idx=0x4 tid=1728 prio=5 alive, waiting, native_blocked
-- Waiting for notification on: weblogic/t3/srvr/SubsystemRequest@0x00000001
82879510[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Metho
d)
at java/lang/Object.wait(J)V(Native Method)
at weblogic/t3/srvr/SubsystemRequest.rendezvouz(SubsystemRequest.java:100)
^-- Lock released while waiting: weblogic/t3/srvr/SubsystemRequest@0x0000000
182879510[fat lock]
at weblogic/t3/srvr/SubsystemRequest.action(SubsystemRequest.java:81)
at weblogic/t3/srvr/SubsystemRequest.start(SubsystemRequest.java:51)
at weblogic/t3/srvr/ServerServicesManager.startService(ServerServicesManager
.java:459)
at weblogic/t3/srvr/ServerServicesManager.startInStandbyState(ServerServices
Manager.java:166)
^-- Holding lock: java/lang/Class@0x0000000182852658[biased lock]
at weblogic/t3/srvr/T3Srvr.initializeStandby(T3Srvr.java:881)
at weblogic/t3/srvr/T3Srvr.startup(T3Srvr.java:568)
at weblogic/t3/srvr/T3Srvr.run(T3Srvr.java:469)
at weblogic/Server.main(Server.java:71)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"(Signal Handler)" id=2 idx=0x8 tid=4040 prio=5 alive, daemon
"(OC Main Thread)" id=3 idx=0xc tid=2300 prio=5 alive, native_waiting, daemon
"(GC Worker Thread 1)" id=? idx=0x10 tid=220 prio=5 alive, daemon
"(GC Worker Thread 2)" id=? idx=0x14 tid=2056 prio=5 alive, daemon
"(GC Worker Thread 3)" id=? idx=0x18 tid=1096 prio=5 alive, daemon
"(GC Worker Thread 4)" id=? idx=0x1c tid=2580 prio=5 alive, daemon
"(Code Generation Thread 1)" id=4 idx=0x20 tid=3404 prio=5 alive, native_waiting
, daemon
"(Code Optimization Thread 1)" id=5 idx=0x24 tid=3228 prio=5 alive, native_waiti
ng, daemon
"(VM Periodic Task)" id=6 idx=0x28 tid=1564 prio=10 alive, native_blocked, daemo
n
"(Attach Listener)" id=7 idx=0x2c tid=640 prio=5 alive, native_blocked, daemon
"Finalizer" id=8 idx=0x30 tid=248 prio=8 alive, native_waiting, daemon
at jrockit/memory/Finalizer.waitForFinalizees(J[Ljava/lang/Object;)I(Native
Method)
at jrockit/memory/Finalizer.access$700(Finalizer.java:12)
at jrockit/memory/Finalizer$4.run(Finalizer.java:183)
at java/lang/Thread.run(Thread.java:662)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"Reference Handler" id=9 idx=0x34 tid=2092 prio=10 alive, native_waiting, daemon
at java/lang/ref/Reference.waitForActivatedQueue(J)Ljava/lang/ref/Reference;
(Native Method)
at java/lang/ref/Reference.access$100(Reference.java:11)
at java/lang/ref/Reference$ReferenceHandler.run(Reference.java:82)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"(Sensor Event Thread)" id=10 idx=0x38 tid=3548 prio=5 alive, native_blocked, da
emon
"VM JFR Buffer Thread" id=11 idx=0x3c tid=3768 prio=5 alive, in native, daemon
"Timer-0" id=14 idx=0x40 tid=3800 prio=5 alive, waiting, native_blocked, daemon
-- Waiting for notification on: java/util/TaskQueue@0x000000018238DF88[fat l
ock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Metho
d)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at java/util/TimerThread.mainLoop(Timer.java:483)
^-- Lock released while waiting: java/util/TaskQueue@0x000000018238DF88[fat
lock]
at java/util/TimerThread.run(Timer.java:462)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"Timer-1" id=15 idx=0x44 tid=1572 prio=5 alive, waiting, native_blocked, daemon
-- Waiting for notification on: java/util/TaskQueue@0x0000000185AC9490[fat l
ock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Metho
d)
at java/lang/Object.wait(J)V(Native Method)
at java/util/TimerThread.mainLoop(Timer.java:509)
^-- Lock released while waiting: java/util/TaskQueue@0x0000000185AC9490[fat
lock]
at java/util/TimerThread.run(Timer.java:462)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'"
id=16 idx=0x48 tid=3360 prio=5 alive, waiting, native_blocked, daemon
-- Waiting for notification on: com/octetstring/vde/backend/standard/Transac
tionProcessor@0x000000018A83F800[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Metho
d)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at com/octetstring/vde/backend/standard/TransactionProcessor.waitTransaction
sCompleted(TransactionProcessor.java:353)
^-- Lock released while waiting: com/octetstring/vde/backend/standard/Transa
ctionProcessor@0x000000018A83F800[fat lock]
at com/octetstring/vde/backend/standard/BackendStandard.<init>(BackendStanda
rd.java:275)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
at jrockit/vm/Reflect.invokeMethod(Ljava/lang/Object;Ljava/lang/Object;[Ljav
a/lang/Object;)Ljava/lang/Object;(Native Method)
at sun/reflect/NativeConstructorAccessorImpl.newInstance0(Ljava/lang/reflect
/Constructor;[Ljava/lang/Object;)Ljava/lang/Object;(Native Method)
at sun/reflect/NativeConstructorAccessorImpl.newInstance(NativeConstructorAc
cessorImpl.java:39)
at sun/reflect/DelegatingConstructorAccessorImpl.newInstance(DelegatingConst
ructorAccessorImpl.java:27)
at java/lang/reflect/Constructor.newInstance(Constructor.java:513)
at com/octetstring/vde/backend/BackendHandler.<init>(BackendHandler.java:248
at com/octetstring/vde/backend/BackendHandler.getInstance(BackendHandler.jav
a:344)
at weblogic/ldap/EmbeddedLDAP.start(EmbeddedLDAP.java:299)
at weblogic/t3/srvr/SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic/work/ExecuteThread.execute(ExecuteThread.java:256)
at weblogic/work/ExecuteThread.run(ExecuteThread.java:221)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"JFR request timer" id=17 idx=0x4c tid=2260 prio=5 alive, waiting, native_blocke
d, daemon
-- Waiting for notification on: java/util/TaskQueue@0x0000000185B49530[fat l
ock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Metho
d)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at java/util/TimerThread.mainLoop(Timer.java:483)
^-- Lock released while waiting: java/util/TaskQueue@0x0000000185B49530[fat
lock]
at java/util/TimerThread.run(Timer.java:462)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"weblogic.time.TimeEventGenerator" id=19 idx=0x50 tid=600 prio=9 alive, waiting,
native_blocked, daemon
-- Waiting for notification on: weblogic/time/common/internal/TimeTable@0x00
0000018C653048[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Metho
d)
at java/lang/Object.wait(J)V(Native Method)
at weblogic/time/common/internal/TimeTable.snooze(TimeTable.java:286)
^-- Lock released while waiting: weblogic/time/common/internal/TimeTable@0x0
00000018C653048[fat lock]
at weblogic/time/common/internal/TimeEventGenerator.run(TimeEventGenerator.j
ava:117)
at java/lang/Thread.run(Thread.java:662)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"JMAPI event thread" id=20 idx=0x54 tid=2916 prio=5 alive, in native, daemon
"weblogic.timers.TimerThread" id=21 idx=0x58 tid=3288 prio=9 alive, waiting, nat
ive_blocked, daemon
-- Waiting for notification on: weblogic/timers/internal/TimerThread@0x00000
0018C6ABCA0[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Metho
d)
at java/lang/Object.wait(J)V(Native Method)
at weblogic/timers/internal/TimerThread$Thread.run(TimerThread.java:262)
^-- Lock released while waiting: weblogic/timers/internal/TimerThread@0x0000
00018C6ABCA0[fat lock]
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'
" id=22 idx=0x5c tid=1368 prio=5 alive, waiting, native_blocked, daemon
-- Waiting for notification on: weblogic/work/ExecuteThread@0x000000018C2A1C
00[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Metho
d)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at weblogic/work/ExecuteThread.waitForRequest(ExecuteThread.java:205)
^-- Lock released while waiting: weblogic/work/ExecuteThread@0x000000018C2A1
C00[fat lock]
at weblogic/work/ExecuteThread.run(ExecuteThread.java:226)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'" id=25 idx=0x60 tid=1484
prio=5 alive, in native, daemon
at weblogic/socket/NTSocketMuxer.getIoCompletionResult(Lweblogic/socket/NTSo
cketMuxer$IoCompletionData;)Z(Native Method)
at weblogic/socket/NTSocketMuxer.processSockets(NTSocketMuxer.java:81)
at weblogic/socket/SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic/socket/SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic/kernel/ExecuteThread.execute(ExecuteThread.java:145)
at weblogic/kernel/ExecuteThread.run(ExecuteThread.java:117)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'" id=26 idx=0x64 tid=2540
prio=5 alive, in native, daemon
at weblogic/socket/NTSocketMuxer.getIoCompletionResult(Lweblogic/socket/NTSo
cketMuxer$IoCompletionData;)Z(Native Method)
at weblogic/socket/NTSocketMuxer.processSockets(NTSocketMuxer.java:81)
at weblogic/socket/SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic/socket/SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic/kernel/ExecuteThread.execute(ExecuteThread.java:145)
at weblogic/kernel/ExecuteThread.run(ExecuteThread.java:117)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'" id=27 idx=0x68 tid=3640
prio=5 alive, in native, daemon
at weblogic/socket/NTSocketMuxer.getIoCompletionResult(Lweblogic/socket/NTSo
cketMuxer$IoCompletionData;)Z(Native Method)
at weblogic/socket/NTSocketMuxer.processSockets(NTSocketMuxer.java:81)
at weblogic/socket/SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic/socket/SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic/kernel/ExecuteThread.execute(ExecuteThread.java:145)
at weblogic/kernel/ExecuteThread.run(ExecuteThread.java:117)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"ExecuteThread: '3' for queue: 'weblogic.socket.Muxer'" id=28 idx=0x6c tid=1904
prio=5 alive, in native, daemon
at weblogic/socket/NTSocketMuxer.getIoCompletionResult(Lweblogic/socket/NTSo
cketMuxer$IoCompletionData;)Z(Native Method)
at weblogic/socket/NTSocketMuxer.processSockets(NTSocketMuxer.java:81)
at weblogic/socket/SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic/socket/SocketReaderRequest.execute(SocketReaderRequest.java:42)
at weblogic/kernel/ExecuteThread.execute(ExecuteThread.java:145)
at weblogic/kernel/ExecuteThread.run(ExecuteThread.java:117)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"VDE Transaction Processor Thread" id=31 idx=0x70 tid=1520 prio=2 alive, waiting
, native_blocked, daemon
-- Waiting for notification on: com/octetstring/vde/backend/standard/Transac
tionProcessor@0x000000018A83F800[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Metho
d)
at java/lang/Object.wait(J)V(Native Method)
at com/octetstring/vde/backend/standard/TransactionProcessor.waitwrite(Trans
actionProcessor.java:378)
^-- Lock released while waiting: com/octetstring/vde/backend/standard/Transa
ctionProcessor@0x000000018A83F800[fat lock]
at com/octetstring/vde/backend/standard/TransactionProcessor.run(Transaction
Processor.java:228)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
===== END OF THREAD DUMP =============== -
Server stuck in starting phase while starting webi server in BOXI 3.1 CMC
Hello All,
I am new to Business Objects and i am getting an issue in CMC,
many times i am getting an issue while starting or stopping webi servers.
Some times they may stuck in either stopping phase or starting phase.
Just want to know the reason and solution of the issue.
Thanks in advance..Hi,
To activate trace and restarting the server:
> Log on CMC
> Go to servers
> At the very end of the Command Line Parameters add a blank space then -trace.
> The server will show a red flag
> Restart it
Let me know if you need any information.
Regards,
Rameez Shaikh -
Messaging service in "starting" status 8.8
When the server (Windows 2003) is started the Business One Messaging Service gets stuck in "Starting" status and messages fail when sent from B1. Client is using B1 8.8 PL07. The service is set to start automatically when the server starts. They are using SQL 2008 Standard.
If I terminate the B1mail.exe process, I can restart the service and all works well.
I am experiencing the same issue on my demo laptop (Windows Vista).Hi there,
I have just encountered exactly the same problem. My client is running Windows 7 Professional as a server and is on 8.8 PL 11. Gorden, do you have any idea what is causing this? I have UAC disabled and have the 'run as administrator' box ticked for the service manager. I have also tried running the service with the Administrator account rather than the local service. This made no difference.
I can't expect the client to manually start this service each time her reboots the server.
Thanks.
Kind regards,
Simon -
Webintelligenceprocessingserver stucks in "initializing" status
Hello everybody!
I have serious problem whith Web Intelligence Processing Server. Today after rebooting SAP BO server it stucked in "initializing" status.
I've tried recreating webi server, tried different setting for it (Cannot initialize report engine server). Nothing, every new server also can't starts.
Please help.
By the way, where can i find Web Intelligence Processing Server logs, if they exist?
Thanks!I've solved this issue.
The problem was in extremly large amount of audit files in (Drive)\Install Directory\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 12.0\Auditing\.
After deleting all of these files and desabling audit for WebIntelligenceProcessingServer this service starts fine.
Some helpfull notes:
1919999 - Web Intelligence Processing Server stuck in Initializing status
1494758 - Web Intelligence Processing Server does not start , remains in Failed mode -
VM Server stuck in "Error" state - cannot start or stop any VMs
I have Oracle VM Server 3.0.2, VM Manager 3.0.2, and have a VM server stuck in an "Error" state. I've gone into all the Event tabs for the server + guests and acknowledged all the errors, but it's still in this state.
When I try to start a VM for example, I get this error on screen (I've obfuscated the server names):
OVMRU_005007E Virtual Machine: <vmname>, cannot be started/resumed on Server: <servername>. Reasons:
Server: <servername>, is in error
AdminServer-diagnostic.log reports:
[2012-03-23T16:58:05.078+13:00] [AdminServer] [ERROR] [] [com.oracle.ovm.mgr.faces.model.EO] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 87aae679e5ee7e1d:-14aa5e4e:1363307a070:-8000-000000000000eb79,0] [APP: ovm_console] Programming error![[
java.lang.NoSuchMethodException: com.oracle.ovm.mgr.api.collectable.ManagedObjectHandleImpl.getUser()
at java.lang.Class.getMethod(Class.java:1605)
at com.oracle.ovm.mgr.faces.model.EO.invokeStringAccessor(EO.java:551)
at com.oracle.ovm.mgr.faces.model.EO.invokeStringAccessor(EO.java:1124)
at com.oracle.ovm.mgr.faces.model.JobEO.getUsername(JobEO.java:608)
at com.oracle.ovm.mgr.faces.backing.task.TaskFilter.isAssociatedUser(TaskFilter.java:216)
at com.oracle.ovm.mgr.faces.backing.task.TaskFilter.isAssociatedWith(TaskFilter.java:241)
at com.oracle.ovm.mgr.faces.model.collection.EOList.isAssociatedWith(EOList.java:239)
at com.oracle.ovm.mgr.faces.model.collection.EventSupport.handleInsert(EventSupport.java:60)
at com.oracle.ovm.mgr.faces.model.collection.EOList.handleInsert(EOList.java:211)
at sun.reflect.GeneratedMethodAccessor1446.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.ovm.mgr.faces.model.ChangeSupport.fireChangeEvent(ChangeSupport.java:127)
at com.oracle.ovm.mgr.faces.model.ChangeSupport.fireInsert(ChangeSupport.java:66)
at com.oracle.ovm.mgr.faces.model.DataProvider$EventListener.fireInsert(DataProvider.java:312)
at com.oracle.ovm.mgr.faces.model.DataProvider$EventListener.timerExpired(DataProvider.java:284)
at weblogic.timers.internal.commonj.ListenerWrap.timerExpired(ListenerWrap.java:37)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Nothing gets written to AdminServer.log
Any ideas?Hi Mannyabdon,
Based on your description, I recommend to check the things below:
1. Run the PowerShell command below to check the status of the Secure Store Service:
Get-SPServiceInstance |Where {$_.typename -like "Document Conversions Load Balancer Service"}
If it is not showing online, please stop the service first and then start it to see if the issue still occurs (the
<ServiceGUID> can be obtained obtained from the command above).
Stop the service:
Stop-SPServiceInstance -Identity <ServiceGUID>
Start the service:
Start-SPServiceInstance -Identity <ServiceGUID>
2. Check the ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Employee replications stuck in 'Not started' status.
Some of the Employee replication has been stuck in not started status.When you go to the edit mode and click on replicate and then save, the entries will be saved. But the status of the employee replication will be in not started status instead of successful or failed status.
The reason might be discrepancy in the secondary persistence. This lead to the fact that you got records by the query which seemed to be relevant, but in the original persistence they were already marked as irrelevant. From SAP end we trigger a reload of the secondary persistence and the issue will be solved.
Thanks.
CryssalDo you think there is an agent logged in and Not Ready, or do you think it's a hung session?
If you think it's a real login, reboot the PC.
If you think it's a hung session then you'll have to restart a service of two. I would just plan for a maintenance window and reboot the server along with your CUCM CTI Manager.
Good luck and happy troubleshooting!
Sent from Cisco Technical Support iPhone App -
WebLogic Server: 10.3.5.0 - Managed stuck in STARTING
Hi all. I have a managed stuck in STARTING for like 2 hours, the logs are these:
####<Sep 25, 2013 1:40:42 PM CEST> <Info> <JMS> <XXXXXXXXXXXXX> <ofi-spss-01> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <6737003733c3b0fc:-2e9de822:14154e52035:-7ffd-0000000000000002> <1380109242585> <BEA-040321> <JMSServer "JMSServer-SPSS-1" is resuming.>
####<Sep 25, 2013 1:44:56 PM CEST> <Info> <Messaging> <XXXXXXXXXXXXX> <ofi-spss-01> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <6737003733c3b0fc:-2e9de822:14154e52035:-7ffd-0000000000000002> <1380109496786> <BEA-282003> <The messaging kernel JMSServer-SPSS-1 will use up to 536,870,912 bytes of memory before paging begins>
####<Sep 25, 2013 1:44:56 PM CEST> <Info> <Messaging> <XXXXXXXXXXXXX> <ofi-spss-01> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <6737003733c3b0fc:-2e9de822:14154e52035:-7ffd-0000000000000002> <1380109496795> <BEA-282001> <The messaging kernel JMSServer-SPSS-1 is beginning recovery of its persistent state>
It's creating a log ot .TMP files under the managed tmp. There is a way to speed up or elude this "recover"? Please note that I'm quite noob with Weblogic.
Thanks!Hi,
Add -Dweblogic.StdoutDebugEnabled flag while starting the managed server and then post the verbose error message in your next post
For setting the flag follow the below steps
If your using Linux box and not using node manager to start the managed server,add the below line startManagedWebLogic.sh file
JAVA_OPTIONS="-Dweblogic.StdoutDebugEnabled=true ${JAVA_OPTIONS}"
echo "JAVA_OPTIONS=${JAVA_OPTIONS}"
If your using Windows box and not using node manager to start the managed server,add the below line startManagedWebLogic.cmd file
set JAVA_OPTIONS=-Dweblogic.StdoutDebugEnabled=true %JAVA_OPTIONS%
echo JAVA_OPTIONS=%JAVA_OPTIONS%
If you are starting the Managed server through the node manager then use these flags From Admin console : servers >>>. MS1 >>>> server start >>>> Arguments :-Dweblogic.StdoutDebugEnabled=true
Regards,
Fabian -
Managed server is stuck in STARTING
Hi All,
I have managed severs on weblogic consol.
These servers are linked to the windows services on my prodcution server.
to start and stop the managed servers we used to simply restart the respective services on the production server.
Now the situation is - two managed servers are stuck in STARTING state though i restarted my windiws services several tims?
Please advice ASAP as its a production enviroment issue.. Thanks
Mahendrasame thing in our case but little different.
i have a domain with four different clusters where two instances per cluster and those instances reside on two separate machines. All these instances are under NM control with -Xnohup switch on the serverstart tab.
the problem i have is, when we have a weekly reboot on the two windows servers, one particular cluster instances always in 'STARTING' state. As you can see below the .out log will have the following content and nothing else. EVen for a day or two the server sits on 'STARTING' state with no additional logging in .out file.
At this stage it gets ugly to bring the instances back to normal. We can't kill the instances so we had to use process explorer to kill it. As nodemanager restarts the instance immediately after killed the isntances we had to stop NM.
again start NM and start repeating the steps untill the instances back up to normal. This is not good.
not sure what else we can do. any kind of help is appreciated..thanks
<Oct 19, 2012 11:01:41 AM> <Info> <NodeManager> <Starting WebLogic server with command line: D:\bea\jrockit-jdk1.5.0_24-R28.1.0-4.0.1\bin\java -Dweblogic.Name=System_Managed01 -Dbea.home=D:\bea -Djava.security.policy=D:\bea\weblogic92\server\lib\weblogic.policy -Dweblogic.management.server=http://rchz3105.mckesson.com:7510 -Djava.library.path=D:\bea\WEBLOG~1\server\bin;.;C:\WINDOWS\system32;C:\WINDOWS;D:\bea\WEBLOG~1\server\native\win\x64;D:\bea\WEBLOG~1\server\bin;D:\bea\jrockit-jdk1.5.0_24-R28.1.0-4.0.1\jre\bin;D:\bea\jrockit-jdk1.5.0_24-R28.1.0-4.0.1\bin;D:\bea\WEBLOG~1\server\native\win\x64\oci920_8;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files (x86)\ZANTAZ\EAS Client\; -Djava.class.path=D:\bea\patch_weblogic923\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\bea\weblogic92\domains\SupplyManager\lib\xercesImpl.jar;D:\bea\weblogic92\domains\SupplyManager\lib\yuicompressor-2.4.2.jar;D:\bea\jrockit-jdk1.5.0_24-R28.1.0-4.0.1\lib\tools.jar;D:\bea\weblogic92\domains\SupplyManager\lib\ojdbc14_10.2.0.4.jar;D:\bea\weblogic92\server\lib\weblogic.jar;D:\bea\weblogic92\domains\SupplyManager\lib\customlogger2.jar;D:\Program Files\wily\WebAppSupport.jar -Dweblogic.system.BootIdentityFile=D:\bea\weblogic92\domains\SupplyManager\servers\System_Managed01\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xgc:gencon -Xms1024m -Xmx1024m -XXcompressedRefs:enable=false -XX:+FlightRecorder -XX:FlightRecorderOptions=defaultrecording=true,disk=true,repository=D:/bea/weblogic92/domains/SupplyManager/jfr,maxage=5m,maxchunksize=10m -XX:StartFlightRecording=filename=system.jfr -XlargePages -XX:+HeapDumpOnCtrlBreak -XX:+HeapDumpOnOutOfMemoryError -Xnohup -Xverbose:gc,gcpause,codegen,opt,codegc -XverboseLog:D:\wls_logs\servers\System\gc.txt -XverboseTimeStamp -Dweblogic.TracingEnabled=true -javaagent:"D:\Program Files\wily\Agent.jar" -Dcom.wily.introscope.agentProfile="D:\Program Files\wily\IntroscopeAgent.profile" -Dcom.wily.introscope.agent.agentName="system-managed01" -XX:+UnlockDiagnosticVMOptions -XX:MaxClassBlockMemory=100M weblogic.Server >
<Oct 19, 2012 11:01:41 AM> <Info> <NodeManager> <Working directory is "D:\bea\weblogic92\domains\SupplyManager">
<Oct 19, 2012 11:01:41 AM> <Info> <NodeManager> <Server output log file is "D:\bea\weblogic92\domains\SupplyManager\servers\System_Managed01\logs\System_Managed01.out"> -
OIM server not running, stuck in starting state
I have started OIM server through cmd , but its not going to running state, and its stuck to starting only.
Kindly suggest
KKis there any error?
try once by deleting temp files in oim_server.
_saurabh -
Remotely starting the CMS server using a SSH script in a Unix environment.
Is it possible to remotely start a CMS server using a shell script which starts an SSH session and runs the startservers command asin the command below:
ssh -o ConnectionAttempts=2 -o ConnectTimeout=10 -l boadmin huxd0226 '/opt/BO/boxir2/bobje/startservers'
The command securely logs into the server (huxd0226) and runs the command described in single quotes.
the CMS server actually appears to start but then dies inexplicably and displays no errors in the trace logs. The full log file is displayed below:-
Timestamp ProcessID ThreadID Message
Thu Sep 18 10:59:05 2008 913548 1 (wireobinit.cpp:97): trace messa
ge: Creating the shared CWireObject::PropertyNameMap
Thu Sep 18 10:59:05 2008 913548 1 (wireobinit.cpp:119): trace mess
age: Setting static property map
Thu Sep 18 10:59:05 2008 913548 1 (wireobinit.cpp:126): trace mess
age: CWireObject::InitializeStaticPropertyMap() - reference count: 1
Thu Sep 18 10:59:05 2008 913548 1 Log: level=3 cat=1 msg=35100 p=C
entral Management Server started
Thu Sep 18 10:59:05 2008 913548 1 trace message: SIServerControlle
r::run: Before initialize
Thu Sep 18 10:59:05 2008 913548 1 (sidaemon.cpp:416): trace messag
e: SUNIXDaemon::init: starting
Thu Sep 18 10:59:05 2008 913548 1 trace message: SUNIXDaemon::init
: redirecting stdio to /dev/null
Thu Sep 18 10:59:05 2008 913548 1 (sidaemon.cpp:209): trace messag
e: installing fg terminiation handler
Thu Sep 18 10:59:05 2008 913548 1 (sidaemon.cpp:220): trace messag
e: installing abnormal sys handler
Thu Sep 18 10:59:05 2008 913548 1 (sidaemon.cpp:506): trace messag
e: SUNIXDaemon::init: finished
Thu Sep 18 10:59:12 2008 913548 1 trace message: GetClockSequenceU
pdater: Getting clock sequence updater
Thu Sep 18 10:59:13 2008 913548 1 trace message: SSimpleBuffer::lo
adFromFile: calling mmap(): fileName[/opt/BO/boxir2/bobje/enterprise115/aix_rs60
00/sqlrule.llr], lFileLength47132, fd10
Thu Sep 18 10:59:13 2008 913548 1 trace message: SSimpleBuffer::lo
adFromFile: calling mmap(): fileName[/opt/BO/boxir2/bobje/enterprise115/aix_rs60
00/sqlrule.dfa], lFileLength26824, fd10
Thu Sep 18 10:59:14 2008 913548 1 trace message: Loading: database
subsystem: db2databasesubsystem
This is exactly the same as a normal manual startup of the CMS server except it dies at the loading of the db2databasesubsystem section.
Business Objects is patched to Fix Pack 3.6 and is clustered in a HACMP environment. It is a requirement that when the DB2 database fails, shortly after restarting it can automatically start the Business Objects services remotely.
SSH will work if the command is entered manually from within a secured session, but it is only when automated that the failure occurs. Does anyone have an idea on why this is happening and whether it is in fact possible ?we're going to run into deep offtopic if we continue that line ))
But I believe there is a big push to get the forum format actualy working this time. -
ReportApplicationServer (RAS) stuck at starting on BO XI 3.1 SP2
Greetings,
We have been facing a problem with the RAS service. The status of the server is stuck on starting and doesn't go to a started state. All other servers start normally
Our Environment:
OS: Windows Server 2008
BO: BOXI 3.1 SP2 Clustered (2 servers)
CMS Database: Oracle 10G
Web Tier Components: WebLogic 10.3
All other BO servers start normally. The problem appears on only one of the clustered servers. The other member of the cluster has not issues.
We enabled tracing and this is the error part:
2010/04/06 07:32:56.782|==| | | 9248|9940| |||||||||||||||(.\oscafactory.cpp:748) successful after bind factory
2010/04/06 07:32:56.782|==| | | 9248|9940| |||||||||||||||(.\rasdtsfactory.cpp:262) CRASDTSFactory::CreateServices() returns successfully
2010/04/06 07:32:56.782|==| | | 9248|9940| |||||||||||||||OSCASimpleFactory::isDisabled() 1
2010/04/06 07:32:56.782|==| | | 9248|9940| |||||||||||||||
TraceLog 2010 4 6 10:32:56.782 9248 9940 (*:0) (.\dts\dts.cpp:2683): CDTSApp::InitInstance(): m_bsCMSMachineName is [ECCBOP201.aramco.com:6400]
2010/04/06 07:32:56.782|==| | | 9248|9940| |||||||||||||||
TraceLog 2010 4 6 10:32:56.782 9248 9940 (*:0) (.\dts\dts.cpp:1235): CreateAgent: creating agent=1
2010/04/06 07:32:56.782|==| | | 9248|9940| |||||||||||||||
TraceLog 2010 4 6 10:32:56.782 9248 9940 (*:0) (.\dts\dts.cpp:2747): CDTSApp::InitInstance() returns 1
2010/04/06 07:33:51.715|==| | | 9248|9928| |||||||||||||||CNSClientManager::CheckObjects() : search fails(37) - Transport user error: object with the specified name not found.
2010/04/06 07:33:51.715|==| | | 9248|9928| |||||||||||||||(.\nsclient.cpp:2151) Failed to resolve object. Reregister all...
2010/04/06 07:33:51.825|==| | | 9248|9928| |||||||||||||||(.\nsclient.cpp:2155) succeed.
2010/04/06 07:33:51.825|==| | | 9248|3324| |||||||||||||||OSCASimpleFactory::isDisabled() 1
2010/04/06 07:33:51.825|==| | | 9248|3324| |||||||||||||||(.\oscadtsfactory.cpp:231) OSCADTSFactory_impl::newService() throwing because server is disabled: serviceName[Auditing], descriptor[]
2010/04/06 07:33:53.825|==| | | 9248|8772| |||||||||||||||OSCASimpleFactory::isDisabled() 1
2010/04/06 07:33:53.825|==| | | 9248|8772| |||||||||||||||(.\oscadtsfactory.cpp:231) OSCADTSFactory_impl::newService() throwing because server is disabled: serviceName[Auditing], descriptor[]
Notes
The appliaction crystalras.exe is allowed through the firewall.
Any ideas?
ThanksWe have resolved the problem (minutes after posting it!)
There are two NIC cards on the sever and apparently that caused the issue.
Resolution:
1. Log on to CmcApp
2. Go to Servers
3. Go to the properties of the ReportApplicationServer
4. Under Common Settings:Host Identifiers:IP Addres: Specify the IP of of the primary NIC card of the BO Server.
5. Save and close
6. Restart the ReportApplicationServer
Regards,
Hassan -
User Profile Service - User Profile Incremental Synchronization Progress: 33% Status: Pausing
It has been almost 15 days.
Both User Profile Service and User Profile Synchronization Service are in Started state and FIM service also starting
I tried clearing sharePoint config cache.
I also restarted the sharepoint timer service.
I tried almost everything that is on Internet but nothing helped me.
Is there any other way to solve the issue as I was struck on production server (ASAP)
In synchronization serivce manager status of MOSS_DeltaImport is Inprogress from past 2 days
Best Regards.Hi,
Please follow the steps in the link below to clear the configuration cache.
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/beaa852c-6f40-428a-b97c-20722864e045/user-profile-service-user-profile-incremental-synchronization-timer-job-stuck-at-88-status?forum=sharepointadminprevious
Or try to clear the file system cache on all servers in the server farm on which the Windows SharePoint Services Timer service is running. Microsoft has provided a step by step procedure on clearing file system cache from the SharePoint front-end servers
in this kb article.
You can also see the ULS logs and check error messages.
http://sharepointlogviewer.codeplex.com/
Best Regards
Dennis Guo
TechNet Community Support -
Workflow stuck in starting state after applying SharePoint 2010 CU December 2012
I have custom visual studio workflow which are associated with Custom content type. workflow gets triggered automatically when a file is uploaded to SharePoint. Everything was working fine till when i apply the following CU
http://blogs.msdn.com/b/joerg_sinemus/archive/2012/12/27/sharepoint-2010-and-december-2012-cu.aspx
After applying this my workflow get stuck in "Starting" state.
No error were logged in 14 hive logs.
Thanks in Advance!It took me a while but I came up with a work around. There is a PowerShell script below that can be used to trigger the workflow. Hopefully this will hold all of us over until the official fix arrives.
First remove the auto start on change or new from the affected workflow
Edit the script below to match your environment
Add the script to Windows task scheduler with the PowerShell.exe in the command line
This assumes PowerShell.exe is in the path
Then add the full path and script name in the add arguements text box
Script:
#The purpose of this script is to start the SPD workflow with the windows task scheduler for a trigger
#This should avoid the check in-out issue caused by the December 2012 SP CU patch
#This needs to be run on an account with membership in the farm administration group for SharePoint and Shell in SQL
#You can use a find and replace to replace the server and other names with your actual names
#There are no status messages being used since this will be a scheduled task in the Windows task scheduler
#Add SharePoint modules and create variable space
add-pssnapin microsoft.sharepoint.powershell
start-spassignment -global
#Open the web site, list and the workflow
$site=get-spsite %site url%"
$web=get-spweb %Web url%
#Open the %affected% library or list and workflow association
$%affected%=$web.getlist("%affected%")
$manager=$site.workflowmanager
$culture=[system.globalization.cultureinfo]::currentculture
$wfname="%affected workflow name"
$association=$%affected%.workflowassociations.getassociationbyname($wfname,$culture)
$data=$association.associationdata
$wfrunoption=[microsoft.sharepoint.workflow.spworkflowrunoptions]::synchronous
#Start workflow
foreach ($item in $%affected%.items) {
$site.workflowmanager.startworkflow($item,$association,$data,$wfrunoption)
stop-spassignment -global -
3.2 Server Stuck Offline & Wake on LAN issues
Got through installation and getting started guide running 1 VM Server and a separate VM Manager I was able to shutdown the Server from the Manager GUI; however, when trying to restart the Server from the Manager I received an error: OVMAPI_4005E No worker server found to perform operation on: ovmserv1. I was able to restart the Server by pressing the power button and the Manager was able to recognize the Server as on after it booted. The Manager reports the Server as having Wake-on-LAN 'Yes'. I'm using onboard NIC on Supermicro server, BIOS has a wake on modem feature, nothing for wake on LAN or PCI device. I checked the Server with ethtool and it reported Wake-on-Lan was enabled on both eth0 and eth1. There is an optional IPMI card available for the server but my understanding is that IPMI is only needed if trying to wake from a different network, while everything here is on the same LAN and ping-able. Any help will be greatly appreciated.
Last night I added an Openfiler iSCSI SAN with 3 SCSI targets, one for the pool file , one for the repository and an extra one. Setup server pool, pool file and repository in the Manager. Everything seemed great and I was looking forward to importing some appliances the next day and I shutdown for the night. Today I was trying to setup an FTP server and was messing with LDAP on the Openfiler server, unable to get that going I tried to setup an FTP server on my laptop which is also on the LAN. Later when firing everything up, somehow the NIC on the Manager had been disabled and the Manager was booted without network connectivity. After shutting down the Manager, re-enabling it's NIC and booting up again, the network connectivity was good. The problem is the Manager reports the Server as either Offline when the Server is on, or Stopped(Error) when the Server is off. Using the Manager trying to start the Server fails with 'already on' and trying to stop Server fails with 'not running'. I shutdown and rebooted all 3 servers a couple of times in different orders and the problem persists with the Server still stuck in Offline status. Any help will be greatly appreciated.Hi,
I uninstalled Mozy a long time ago just because it did prevent my iMac i7 to go to sleep.
I don't know if they have fixed the problem since with an update, or if they'll do it but yes for me back then Mozy = no sleep.
Wake on lan should stay unchecked if you don't need it, this is also known to be a frequent cause of sleep issues.
EDIT : sorry... I didn't read properly your message... My problem was the opposite... Sorry again for my mistake...
Message was edited by: LeDav007
Maybe you are looking for
-
I'm worried because one of my friends opened a website that seemed weird and i dont know if i could of gotten a virus or malware.
-
How to get the cropped page content
Consider an A4 size pdf is cropped in Bottom and Right edges. If the user wants to open the pdf as A4 size then we are passing the rectangle size A4 to PDPage.DrawEx() method to get the page content. When we use like this, we are getting the full pag
-
Why isn't my photo stream backing up to iCloud anymore?
I have all the boxes ticked for my phone to automatically back up and it has been backing up photos until Nov 19th. I've tried manually backing up and also exiting out of the camera ap on my phone, but I just can't get my photos I've taken since Nov
-
Greetings all. I have a contact management database for different departments. As it stand right now, I have a list for each department, and when you click on a department it takes you to a webpage that populates with information pertaining to the se
-
Song list not changing when selecting a new artist
I'm having problems with the Music app changing the song list when a new artist is selected. I'm in Artist view, select a new Artist however the song list of the prior artist being played remains. Seems to be an issue with my music. Not an issue w