Webintelligenceprocessingserver stucks in "initializing" status

Hello everybody!
I have serious problem whith Web Intelligence Processing Server. Today after rebooting SAP BO server it stucked in "initializing" status.
I've tried recreating webi server, tried different setting for it (Cannot initialize report engine server). Nothing, every new server also can't starts.
Please help.
By the way, where can i find Web Intelligence Processing Server logs, if they exist?
Thanks!

I've solved this issue.
The problem was in extremly large amount of audit files in (Drive)\Install Directory\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 12.0\Auditing\.
After deleting all of these files and desabling audit for WebIntelligenceProcessingServer this service starts fine.
Some helpfull notes:
1919999 - Web Intelligence Processing Server stuck in Initializing status
1494758 - Web Intelligence Processing Server does not start , remains in Failed mode

Similar Messages

Application Server Administration Service Timer Job stuck at Initialized 0% . Config Cache clear doesnt Help.MOSS2007

Hi All,
One of my WFE/Query server for MOSS is showing Application Server Administration Service Timer Job stuck at Initialized 0% in CA timer Job status.
In timer Job Status in CA under the SSP Job Control service I find the Application Server Administration Service Timer Job struck at 0%
I have tried Clearing config cache of the Farm . I have tried disconnecting this server from Farm and reconnecting it with Psconfig UI, I have tried running Psconfig.exe on the affected server. But even after doing this service is stuck at 0%
If I exit the OWSTimer.exe from task manager, it shows aborted at 0% . I am using a single SSP and reconfiguring SSP is not an option right now.
Any help regarding it will be greatly appreciated.
Regards,
Rohit

Hello,
Have you changed the password recently? Also try to restart the windows timer service on all server.
You might also want to check these threads:
http://sharepoint.stackexchange.com/questions/44073/why-timer-job-stucks-at-initialized-status
http://social.msdn.microsoft.com/Forums/en-US/d238cc1c-5c41-4762-9878-020cb36679c3/wss-30-workflow-timer-job-status-stuck-at-initialized-0
http://social.technet.microsoft.com/Forums/sharepoint/en-US/7d932581-91a9-41f2-8848-95f8a72ba19b/timer-job-initialized-0?forum=sharepointadminlegacy
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Requests stuck in 'Initialized' and 'Received' status

Hello.
I perceiving that in my environment, the Requests, usually "Revoke and Disable" are stucked either "Initialized" or "Received" status. I do not know why.
But, I saw that sometimes in the Resource of the User, the Resouce is Rrovisioning or Waiting.
First question.
If the Resource of the User is different of "enable or provisioned" status, this could interfering on the Request of Disabled or Revoke?
Second question.
How can I solve the problems of the "stuck requests"?
Bye.

Hey Daniel,
Request status itself in OIM is not consistent. For the answer , you need to go through each step and record what your status is to know what the outcome is going to be. So, you should get different status's if you do more than into one task and also have actual approval tasks involved.
I hope this helps,
THiago Leoncio.

PI RWB-Messages stuck in Delivering Status

Hi Experts,
PI 7.1
Scenario: Proxy to Mail (Outbound)
QOs: Exactly Once in Order
We are facing problem while sending messages to receiver.
Messages are stuck in Delivering status and the messages followed by them are going into holding status.
Messages in Delivering status has no audit logs.
Issue has started couple of months back. We took restart initially to rectify the barrier but it is happening again. This is repetitive issue and we are looking for permanent fix. Restart is not preferred resolution as it is a production system. Please suggest how can we overcome it? It would be a great help.

Hi Hardik
I've blogged about this issue recently. Please check out the blog:-
http://scn.sap.com/community/pi-and-soa-middleware/blog/2014/03/27/handling-and-preventing-messages-stuck-in-to-be-delivered-status
Rgds
Eng Swee

FCIP interface stuck at initializing on 9216i v2.1a (vsan segmented)

Following the instructions in both the config guide and troubleshooting guide to configure the FCIP profile and interface, my fcip2 interface status is stuck at initializing. Looking in FM events tab, I can see that the 9216i's are cycling between these states: vsan merged; N_Port unmanageble; vsan segmented and N_Port Up. show fcdom domainlist on the higher priority switch shows it flip-flopping between [local] and principal] [local] states. Using show zoneset active, I can see the zoneset being transfered over to the 2nd switch. Despite all this, the fcip interface does not stay up. Thanks for helping.

Just going from your info, it sounds like the interface comes up for a little bit of time. More than likely then, the issue is MTU. You have an MTU configured larger than somewhere in the network can handle it. If you get the show log output and it shows alot of TCP retransmissions, this is the problem.

CC Desktop app update is stucked on "finishing" status

Hello,
2 days ago I initiated updates of CC apps from the CC desktop app as it notified me to do so.
I started to update after effects CC and while it was doing so I was working on Lightroom. Then a pop up window appeared asking me to close lightroom before the update can finish. I did so and since then the update status is stuck on "finishing" status and has not been finishing it...
What should I do?
Thanks,
Jean-Yves

Hello Jean-Yves,
Adobe has provided these things: Creative Cloud Help/Troubleshoot download and install issues >>>
https://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
and (no longer) brandnew: Creative Cloud Help/App doesn’t open; progress wheel spins continually
http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html
And if necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
Hans-Günter

CAPTURE stuck on INITIALIZING

I've removed an existing streams configuration. It appeared to be successful.
However, now that I attempt to define a new configuration, I encountered the following problem:
Capture process status seem to be stuck on INITIALIZING, sometimes moving to DICTIONARY INITIALIZATION and back.
I've read that this could be a problem with finding the archive logs to process, so I checked first_scn of the capture process to see what scn we need next.
And then checked:
SELECT r.CONSUMER_NAME,
r.NAME,
r.FIRST_SCN,
r.NEXT_SCN,
r.PURGEABLE
FROM DBA_REGISTERED_ARCHIVED_LOG r, DBA_CAPTURE c
WHERE r.CONSUMER_NAME = c.CAPTURE_NAME;
To see which log files are needed, and indeed one of them contained the scn I found before.
Then I checked that the files in the result of that query indeed exist at that location, and they do.
What am I missing?

I suspect you still have an SCN initialisation on.
did you also abort the SCN initialisation on the schema for apply and capture when you removed the streams ?
on 10gR2
for capture :
execute DBMS_CAPTURE_ADM.ABORT_SCHEMA_INSTANTIATION( schema_name => 'owner');
for apply
execute DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN( source_schema_name => 'owner , source_database_name => 'SOURCE_DB_LINK_NAME' , instantiation_scn => null , recursive => true);
or also :
exec dbms_streams_adm.remove_streams_configuration;

User Profile Service - User Profile Incremental Synchronization Timer job stuck at 33% Status: Pausing

User Profile Service - User Profile Incremental Synchronization Progress: 33% Status: Pausing
It has been almost 15 days.
Both User Profile Service and User Profile Synchronization Service are in Started state and FIM service also starting
I tried clearing sharePoint config cache.
I also restarted the sharepoint timer service.
I tried almost everything that is on Internet but nothing helped me.
Is there any other way to solve the issue as I was struck on production server (ASAP)
In synchronization serivce manager status of MOSS_DeltaImport is Inprogress from past 2 days
Best Regards.

Hi,
Please follow the steps in the link below to clear the configuration cache.
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/beaa852c-6f40-428a-b97c-20722864e045/user-profile-service-user-profile-incremental-synchronization-timer-job-stuck-at-88-status?forum=sharepointadminprevious
Or try to clear the file system cache on all servers in the server farm on which the Windows SharePoint Services Timer service is running. Microsoft has provided a step by step procedure on clearing file system cache from the SharePoint front-end servers
in this kb article.
You can also see the ULS logs and check error messages.
http://sharepointlogviewer.codeplex.com/
Best Regards
Dennis Guo
TechNet Community Support

Color Laserjet Pro MFP M177fw - stuck on initializing - fresh new printer not working

http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Pro-MFP-M177fw-stuck-on-initializing/m-p/5097731/highlight/false#M194928 ==QTE==Two days ago I received my printer (same as in this thread) and I am experiencing the exact same problems which are described throughout this thread. The printer is stuck on initializing and makes continuous loud noises. Please let me know how this can be taken care of. I would either need to replace this product, or to have it fixed somehow. Await yours soonest.==UNQTE== ++ Ref to the question from the above thread, I also post it here as a new question just to ensure that I get a response. Thanks beforehand and look forward to hearing from you. BrgdsErik

Hi @SSAB ,
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
What happened prior to this issue? (update, paper jam, changed toner)
I would do a hard reset if you haven't tried this method.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Audit Log Trimming Timer Job stuck at "pausing" status

Hi,
We have a SharePoint 2010 farm and our Audit table is growing rapidly. I checked our "Audit log Trimming" timer job and it has been stuck at "pausing" status for more than a month. Any advice to resolve this issue would be great.
Thanks,
norasampang

Hi Trevor,
Do you think the reason that the time job is failing is because the audit log table is big and the audit timer jod times out. I saw your reply here at this
post
where you have mentioned "
It may be timing out. Have you executed it manually to see if it runs without errors?
Can you please explain in more detail what you meant by that. I was thinking of trying to trim the Audit log using this script in small batch. Can you please let me know if this script seems right?
$site = Get-SPSite -Identity http://sharepointsite.com
$date = Get-Date
$date = $date.AddDays(-1021)
$site.Audit.DeleteEntries($date)
At first i would like to delete all datas that are older than 1021 days old and eventually get rid of the other logs in smaller chunks. Any advice and suggestion would be highly appreciated.
Thanks,
norasampang

Email prob : initial status response expected

I use Messaging Server (email.xxx.xxxx )send mail to : [email protected] and [email protected]
[email protected] got mail successful ...
and I did't have any response form XXX.XXX.XXX mail server
after two day I got a "Delivery Notification: Delivery has been delayed" message from postmaster
it say
Recipient address: [email protected]
Reason: unable to deliver this message after 1 day
Delivery attempt history for your mail:
Tue, 6 Dec 2005 20:07:30 +0800 (CST)
Too many failures to this host during this run; skipping this host: Try again later
Tue, 6 Dec 2005 12:04:34 +0800 (CST)
; initial status response expected
Tue, 6 Dec 2005 03:59:43 +0800 (CST)
; initial status response expected
and attachment file in message
delivery-status.txt is
Reporting-MTA: dns;email.xxx.xxxx(tcp-daemon)
Original-recipient: rfc822;[email protected]
Final-recipient: rfc822;[email protected]
Action: delayed
Status: 4.4.7 (unable to deliver this message after 1 day)
what 's mean : "initial status response expected "
how can I trace this problem ???
tks!!

Thanks
this I see ..... , but something strange
I ever tried to use nslookup commend in my server
and nslookup can get answer
name of their mail server.
the name of their mail server is mail.xxx.xxx.xxx
set type=mx
xxx.xxx.xxx................
Non-authoritative answer:
xxx.xxx.xxx preference = 2, mail exchanger = mail.xxx.xxx.xxx
Authoritative answers can be found from:
xxx.xxx.xxx nameserver = dns3.xxx.xxx.xxx
xxx.xxx.xxx nameserver = dns1.xxx.xxx.xxx
xxx.xxx.xxx nameserver = dns2.xxx.xxx.xxx
mail.xxx.xxx.xxx internet address = 140.xxx.xxx.xxx
dns1.xxx.xxx.xxx internet address = 140.xxx.xxx.xxx1
dns2.xxx.xxx.xxx internet address = 140.xxx.xxx.xxx2
dns3.xxx.xxx.xxx internet address = 140.xxx.xxx.xxx3
and I try to telnet mail.xxx.xxx.xxx
it show
telnet> open mail.xxx.xxx.xxx 25
Trying 140.xxx.xxx.xxx ...
Connected to mail.xxx.xxx.xxx .
Escape character is '^]'.
and cn't continue ...........

Reports Stuck in Running Status

We are having a problem where reports are stuck in running status. When looking on the server, the reports stuck in running status taking up a "jobserverchild" process, and does not complete.
Has anyone experienced this issue, and how we can resolve it?

Ok - here we go - we have been experiencing this issue for the longest time - it looks like we have found the culprit:
1) Check the default printer of the report developer who placed this report into Enterprise.
2) Ensure that exact same driver is on the Business Objects Server.
3) Report should schedule fine.
Another option is to set "No Printer" within the report design itself by clicking on File > Page Setup. This way there is no dependency on printer drivers.
Edited by: Troy Underwood on Nov 25, 2009 11:29 PM

How to trigger different Initial statuses in same status profile

Hello All,
In a CHaRm flow, while creating a SDCR document from SLFN we want to make a distinction depending on the subject in SLFN. If the subject is X, then the status should (in the follow-on document SDCR)be "To be estimated" but when the subject is Y then the initial status should (in the follow-on document SDCR) be "Approved".
Since SDCR has only one status profile linked to it which has an initial status as "to be estimated". The logic is not working when we want the initial status as "Approved". Is there anyway to overide the initial status in SDCR ?
Help would be highly appreciated and rewarded.
Aba.

Hello Nirmit,
My problem is a bit different than yours.
But i can help you. You can create a Z status profile as a copy of the existing status profile. Go to transaction CRMBS02 and copy the status profile SLFN0001 to a new ZSLFN001. Once u have copied to Z status profile, u can go to Transaction types in IMG and change the status profile for SLFN Transaction type (which is used for Service Desk) with ur new status profile..
This is one way. But its recommended to copy the transaction type to a Z transaction type and assign your Z status profile to this transaction type. In the status profile, then u can maintain new statuses as u wish.
If you find this helpful, please reward some points.
Cheers

OIM 11gR2- Approved Requests remain in Operation Initiated Status

Hi,
We are using OIM 11gR2 and we are seeing the following behaviour whenver we request for Application Instance
1) End User logs in and requests for Application Instance.
2) The request is created and assigned to the manager for approval.
3) Manager logs in and approves the request.
4) The Requested resource is assigned to the user and the status of the resource is Provisioned. All the tasks in the Resource History are in Completed status.
5) If we see the status of the request, it remains in Operation Initiated status.
We expect the status of the Request to be Request Completed and not remain in Operation Initiated. We are sending a mail notification to the manager once resource is provisioned.
If we remove the notification part, the status of the Request is coming as Request Completed as expected. However with notification getting triggered we are getting problem.
Please suggest a solution.
Thanks and Regards,
Mayuri
Edited by: 943112 on Mar 11, 2013 7:09 AM

Usually after the request is approved and if there is any pending task in provisioning it goes to 'Post Operation Processing Initiated' status. If 'Task to Object Status' mapping is not done properly the request stays in the same status even though all the tasks are completed.
check this link for various request status
http://docs.oracle.com/cd/E27559_01/user.1112/e27151/req_mangmnt_user.htm#BGBGIIDH
In your case it is going to 'Operation Initiated' status when notification is attached. Can you tell where have you triggered notification? In SOA approval task or in Provisioning process? If it is in SOA check whether proper status is returned to the callback webservice after that. Else if it is in provisioning check for task object status mapping.

Workflow Process stuck in Active status

Hi,
My workflow stuck in Active status and user is not able to proceed further. But it is not happening every time. Sometimes the process activty gets stuck. Could anyone please let me know the reason for this behaviour and how to fix this issue?
Thanks

You need to get more information as to what is going on, identify more facts around the issue:
1. First off, run wfstat.sql to get a history of the activities of the process as well as its attribute values.
2. Once the workflow gets 'stuck' what makes it progress? For instance, does running the background engine with parameter Stuck processes=Yes fix the problem?
3. Are there activities deferred that do not get process by the background engine?
4. Does the process get stuck after a notification is responded to but 'nothing' happens?
It would also be useful to have the complete DB version.
Regards,
Alejandro

Webintelligenceprocessingserver stucks in "initializing" status

Similar Messages

Maybe you are looking for