CMS Track configuration does not save after removal of runtime

Hello,
We are having problem to save CMS track configuration after removing a runtime which was taken away from us and is not recoverable. The CMS track config was not updated prior to this and we can no longer make track adjustments due to the old DEV runtime sys not being available. Does anyone have similar issue and know how to fix it?
Thanks!

For this SP5 track, we have not imported SP9 required SCs (SAPJEE, SAPJTECHS, SAPBUILDT, EP_BUILDT). but we did imported them (SP8 version) with patches. We imported most current SP9 patches to the new SP6 track. We want to move our development on the SP5 track to assemble it, then imported to the new SP6 track based SAP XSS cookbook.
We are not able to assemble released activities with broken DCs on the SP5 track. I look a DC for ess/au/fam/cfg, Build.log still shows xlf conversion error:
Ant runtime 4.295 seconds
Ant build finished with ERRORS
The following error occurred while executing this line:
/usr/sap/DID/CBS/61/.B/90062/DCs/sap.com/ess/au/fam/cfg/_comp/gen/default/logs/build.xml:80: Error converting file Texts_tr.xlf
Error: Build stopped due to an error: The following error occurred while executing this line:
/usr/sap/DID/CBS/61/.B/90062/DCs/sap.com/ess/au/fam/cfg/_comp/gen/default/logs/build.xml:80: Error converting file Texts_tr.xlf
Build plugin finished at 2006-12-13 19:30:41 GMT-05:00 (EST)
Total build plugin runtime: 6.794 seconds
Build finished with ERROR
Not sure if you can force it assembled even with this broken DCs as we have not touched this xlf.
Please let me know if you find something similar to us from other customers.
Thans!

Similar Messages

Track pad does not work after installing yosemite on brand new 13" macbook retina

how to fix or revert hack to maverick. yosemite takes long time to load on startup, programs take longer to open and operate in choppy fashion. Im abot five minutes away from returning this mac to the storefor a refund.

If you have any third party trackpad software, you should remove it. Then check your Trackpad and Mouse settings in System Preferences and the Bluetooth setup options as well. e.g..

On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

After importing received and set messages from Opera Mail, Thunderbird works fine but does not save sent messages to Sent folder, even though messages are sent

I successfully imported messages from Opera Mail. Initially the Sent mailbox was not showing in Thunderbird. A quick removal and fresh installation solved that, but Thunderbird does not save the sent messages to the Sent box, where the imported Opera Mail messages are stored. Even though messages are not saved, they are sent correctly. The image attached shows the error message.

Probably a name-confuse If you store sent on mailserver it has to have the right name. (subscribe)
You could set up under Account settings / copies and folders (maps) Sent pointing to the right local folder.

I recebtly bought an app (FIFA 12) now every time i play a match after the match it does not save an just goes to the home page without warning and i have to start all over again and no i did not press the home button. plz help

i recebtly bought an app (FIFA 12) now every time i play a match after the match it does not save an just goes to the home page without warning and i have to start all over again and no i did not press the home button. plz help

You can't gift it, gifting can only be done from within the store, not from within your library.
Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

Canon 60D does not resume after auto power off

My Canon 60D does not resume after auto power off. It shows the empty battery icon when I press the shutter button, even the battey is fully charged. If I remove the battery and insert back it will resume to work. Any one had the same experience and know how to resolve it?

The power switch is actually a "software" switch. It's not like a light switch in that it doesn't actually provide or deprive the camera of power... only removing the battery will deprive the camera of power. This is why it doesn't actually just go dark when you switch off power... instead you'll usually see it perform a sensor clean cycle and then power down. The camera is technically in a kind of "sleep" mode monitoring the switch. If a Canon camera ever seems to lock up and ignore all input, the battery should be temporarily removed to "reboot" the camera. There is no "setting" in a camera that can configure it to ignore buttons. Although... if the camera is in an automatic mode, some input is deliberately ignored to make it easier to use the camera. Put the mode dial in a "creative zone" mode (P, Tv, Av, or M) and all buttons and menus should be accessible. You might try connecting the camera via USB cable to your computer and then attempt to control the camera via the Canon EOS Utility to see if that works. If the camera responds fine to the computer control, then likely the camera's main board and circuits are working fine and it may just be a wiring problem -- as if some cable simply isn't getting a very solid connection. If this is a wiring issue, you are probably better off sending it in for service.

X121e bios does not save changes any more

I wanted to boot with a USB drive but did not succeed (system configuration see below).
The ThinkPad showed me the USB drive but did not boot.
I tried changing the BIOS boot order but the BIOS does not save any changes :-(
Changing the boot order and pressing F10 (save and exit) does not give any warning/error.
I tried resetting the BIOS to defaults (F9) but this gives an error message (see below).
No changes in the BIOS will be saved except the time.
Changes I applied to install Ubuntu are still there (e.g. Legacy Boot).
Does anyone have an idea what's happening?
Thanks!
Error Message after F9 (reset to defaults) and F10 (save and exit)
Security
Failed to save storage: PwdStatusVar. Status: 0x9
Press ENTER to continue
System Configuration
ThinkPad X121e, TYPE 3051-5YG (AMD64)
Running Ubuntu 12.04 LTS

I've tried quite a bit by now, also disconnecting the BIOS battery over night.
Nothing did work out. Seems really weird ...
Worst thing is that I can't boot from USB HDD: The ThinkPad does not show the USB drive as a boot option (I've tried 2 different thumb drives, one HDD) and I cannot change the Boot order (1. USB CD, 2. USB FDD, 3. HDD, then USB HDD, WLAN).
Any ideas on how to restor functionality? I'll see if I can get an external CD drive ...
On a sidenote: I've managed to replace the internal HDD to a WesternDigital model with more space but it behaves strange delaying the boot process--I've replaced it. Are there known compatibility problems? HDD spcifics: WD Scorpio Blue SATA II 500GB (WD5000LPVT)

Itunes does not work after Update any more

Itunes does not start after the uodate and cannot be reinstalled.
Seems not only a problem to me
Any solutions yet ?

Hello Wizzie71,
It sounds like you updated iTunes and now it will not open. Try the steps outlined in the following article. You may need to re install iTunes but your library will remain intact if you do.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thank you for using Apple Support Communities.
Regards,
Sterling

Report Template does not save

HI,
I am creating a new report template. On save I get this error: Error occurred while saving the document template; save again. Although I save again, it does not save the layout. At this stage I don't check the symbols as I have not yet created any into the layout. Even though I say 'check', it does not save at all.
Can anyone help. I have checked the File locations for Template folder to be correct C:\....\SAP\FrontEnd\SAPgui\wwi
Am on GUI 7100.3.12
Patch 12
Any recommendations ? Thanks

Hello Sanjay,
It seems to be DMS configuration issue. May be your system is trying to store the template document to external database by using "kpro". Please check for following two configurations:
1. Go to Basic Data & Tools-->Report Definition >Settings for Document Management>Assign EHS doc type to DMS doc type Here for doc type "SBV" , Ty. should be "SBV" and Data Carrier should be "SAP System" if you are not specifying any external server for document storage.
2. Next, Go to Basic Data & Tools-->Report Definition >Settings for Document Management> Check Doc types and doc statuses. Go to the "Details" of doc type "SBV", and uncheck "kpro" if checked.
If you have configured external server for WWI docs, then you need to define different data carrier.
Please tell if it solves your problem, otherwise you may be probably having problem with your document status management.
In that case, you may like to refer following SAP notes in sequence.
995736,1005225,1091699.
regards
Pavan

Firefox does not save toolbar I made

Since FF upgraded me to Firefox 23 My tool bars are messed
Every time I make a new toolbar Via "Customize" > "Add New Toolbar" after I exit it does not save.
Yes I read over 10 different articles on it.
1) I deleted the localstore.rdf and started from scratch. After 15 minutes of dragging all the icons to various toolbars I close out of Customize. I then restart Only to find my toolbar not saves and icon missing (placed back into the Customize Box)
2) Only solution ALWAYS given is going to Safe Mode and resetting everything.
That requires me to spend 5 hours backing all the settings and data I have saved in the various 189 items loaded.
Why so many? If not that many I would have to spend 6 hour more all day on my computer doing things that many of these addons do for me. Time is Money.
3) This is not the first time over the 8 years or so of using Firefox this has occured.
4) Question why doen't save when you close out of "Customize" than when you exit? Plus what in Firefox is messed up that it is not saving right?

Nope, I tried it again and added buttons to the New Tool bar I made and everything disappeared once I restarted Firefox up again. So they have not solved it. From FF 23 now on FF26 and it has not been fixed

Acrobat 9.4.2 does not save/export all graphic formats

Dear all,
Obviously i had my glass of wine to early! See http://forums.adobe.com/thread/798630 for the whole story of my re-re-re-istallation of Acrobat.
The installation of 9.0 from the TCS2 DVD was OK
After update to 9.2 my tests displayed correct results for all desired tasks
After the update to 9.4.2 i obviously did not test thoroughly enough (hence the glass of whine).
Later it turned out that 9.4.2 does not save/export graphic formats:
pdf (all flavours), eps and ps are exported correctly
html (all flavours) export a html file and the image as jpg correctly
jpg, jp2 does not save anything, and no error message gives a hint
doc, rtf save issue error message "Save As failed to process this document. No file has been created"
png and tif do not save anything, and no error message gives a hint
xml table and xml export correctly
txt (both flavours) are exported correctly
Hence the only method i can get a picture is to export as HTML and through away the HTML... or: enlarge the picture as much as possible on the screen and take a screen shot.
What is missing in this installation?
During my re-re-re-installtions some Windows updates may have happened.
Any help available for this issue?
Klaus Daub e

The story goes on and hopefully Adobe has an answer/fix for this
There was an automatic update from 9.4.2 to 9.4.3, but the problem still existed.
So I decided to uninstall Acrobat and re-install it for the nth time: start with the installation of 9.0 from TCS2, reboot, update to 9.2, reboot, update to 9.4.3 and reboot again.
The result is very mixed (and this was alrady with the newly installed 9.0):
Save as RTF or DOC creates RTF and DOC files - although the contents is not that useful.
Save as PNG is OK
Save as JPG, JP2 or TIF works, but it turns out, that the files are all PNG (although with the various extensions)!
Creating a snapshot now works correctly. The clipboard receives a bitmap. However: although I have set the preferences for the snapshot to be of 96 dpi the bitmap gets the property 72 dpi!
Setting acrobat.exe to be Compatible to XP SP3 does not change a jota.
Keep in mind: on Windows XP things worked correctly for a long time. Switching to Window 7, x64 creates this strange problem.
I need to start with Acrobat from the TCS2 DVD, because otherwise I do not get the correct implementation for working with FrameMaker.
I'm very reluctant to buy Acrobat X, for me there are too many gimmics there (besides the costs).
Klaus Daube

PCI wireless card does not work after restart - FM2-A55M-E33

Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?

Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much)

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

CMS Track configuration does not save after removal of runtime

Similar Messages

Maybe you are looking for