CMSS - SOAP exception error

I'm trying to connect my CRM 52 system to the CMSS application located on the java stack on the same box. I can see that the two applications are talking, however I can not get the drop down option for the ready/not ready status for the agent logged in. I traced this back to a SOAP exception being triggered when the method CL_BCB_SYSTEM=>GET_WORKCENTER_CAPBILITY makes a soap call for the soap method getWorkcenterCapability?
Has anyone encountered this issue and if so how did you fix the configuration? The agent can "login" and is seen in the CMSS application, but the agent can become "ready" for access.
My java logs of the CMSS are showing a WebServices Security error.
Thank you,
Stephen

I solved this problem myself. I did document the solution via this weblog:
/people/stephen.johannes/blog/2008/05/21/crm-contact-center-simulator-setup
Take care,
Stephen

Similar Messages

Error in SFP (SOAP Exceptional error)

Hi,
I have ECC 6 and Adobe livecycle designer 7.1 installed in my system. When Im trying to design
layout in SFP (via. layout button) it is taking me to Adobe form designer(i have done
with interface and print program step) however when im executing this (test run or print form) it is giving me "SOAP Exceptional error". Also, in SM59 ADS connection test is getting failed. Is there
any seeting from netweaver side I have to do. Can anybody please let me know regarding this.
Im an ABAPer and not sure about these settings and scenarios.
Rgds
Sudhanshu

Hi,
Ask any Basic person to look into the installation and if any other support packs need to be configured..
This is not the work of an ABAPer. Get in touch with the BASIS person
Regards
Shiva

ADS SOAP Exception Error

Suddenly the ADS stopped working after near to a month period.
When trying to execute the program FP_PDF_TEST_00 , i am getting the following error
SOAP runtime exception: CSoapExceptionTransport : (100101). As per the this discussion in the thread adobe document services communication problem
I tried to perform
Visual Administrator -> server -> service -> security provider
-> User Management -> select user ADSUser
Then check for 'No password change is required'. and got the error "unable to setup user properties panel"
After that i tried to change the "security policy" field dropdown through the UME for the ADSuser but it coming in readonly mode and it is pointing to Default.
I am using CRM 6.0 with version 7.00 SP12 . Any ideas what is happening ?
Edited by: Dharm dhwaj Singh on Jul 17, 2009 12:13 PM

Hello
for PDF printing you need ADS configuration. You can check if ADS is configured in your system using program
FP_PDF_TEST_00.
Execute this program in SE38 and it should give you ADS version if its installed else SOAP error if its not configured.
if you have SOAP error ask your basis guy to configure ADS. normally SOAP error exist is you are not able to connect to ADS because of expiration of password to the ADS server.
Hope this helps.
you can also refer below link.
http://help.sap.com/saphelp_nw70/helpdata/en/6f/8e0a414f3af223e10000000a155106/content.htm

Coldfusion SOAP Exception Error Handling

Dear All Technology Expert's,
I have a query related to Coldfusion SOAP services, that is most commonly asked in all the forum's but NONE of them has got answer.
If there is NO solution so I think Adobe has to come up with some patches so developer can able to do some customization.
I like to share with you all, in all other language ( PHP, JAVA, .NET etc) this option is available and you can customize the error.
Ok let me again explain the very basic error:
SOAP Request:
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
   <soapenv:Header/>
   <soapenv:Body>
   </soapenv:Body>
</soapenv:Envelope>
SOAP Response:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <soapenv:Body>
      <soapenv:Fault>
         <faultcode>soapenv:Server.userException</faultcode>
         <faultstring>java.lang.Exception: Body not found.</faultstring>
         <detail>
            <ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">java.lang.Exception: Body not found.
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:121)...</ns1:s tackTrace>
            <ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">Coldfusion Error</ns2:hostname>
         </detail>
      </soapenv:Fault>
   </soapenv:Body>
</soapenv:Envelope>
HOW we can customize the error, in all other languages you can simple customize the error like
Other languages SOAP response:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <soapenv:Body>
      <soapenv:Fault>
         <faultcode>BODY_NOT_FOUND</faultcode>
         <faultstring>Body is missing in your request</faultstring>
      </soapenv:Fault>
   </soapenv:Body>
</soapenv:Envelope>
But the same is NOT possible in Coldfusion, right?
AS you know it is vulnerability to display exception messages in the response.
We are developing this web service to access from other language website (PHP, .NET).
We are also planning to upgrade server the Coldfusion 11, but do you think there is any solution with latest Coldfusion version.
Please response only if you know about these issue's or solution.
Thanks
Niyaz

@Niyaz
You will gain little by asking the same question in multiple places in the forum. In fact, many might consider it annoying or even spam.
This question is being discussed in the thread that HaroonTyagi started. (Are you HaroonTyagi, by chance?) I will post an answer there shortly.

Soap Exception issue whule launching Application library in EPMA

Hi All,
I am getting soap exception error when I am trying to launch EPMA through workspace.
below is the error message I am getting:
*; nested exception is:*
HTTP transport error: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Missing WWW-Authenticate header.
I have installed EPM 11.1.2.2 in distributed environment
Server1
Foundation
EPMA
Reporting
FDQM
Planning
Server2:
Essbase / EAS / Oracle 11g / ODI
I installed full database client Administration edition in different paths on server1 machine
Installed Oracle 11g R2 32 bit client. ( installed for FDQM)
Installed Oracle 11g R2 64 bit client. (for EPMA )
All the components are working fine except EPMA.
All my services are running / IIS is working / ASP.net s working
Please help me !! I am stucked here.
Thanks
Aman

Hi All,
I am getting soap exception error when I am trying to launch EPMA through workspace.
below is the error message I am getting:
*; nested exception is:*
HTTP transport error: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Missing WWW-Authenticate header.
I have installed EPM 11.1.2.2 in distributed environment
Server1
Foundation
EPMA
Reporting
FDQM
Planning
Server2:
Essbase / EAS / Oracle 11g / ODI
I installed full database client Administration edition in different paths on server1 machine
Installed Oracle 11g R2 32 bit client. ( installed for FDQM)
Installed Oracle 11g R2 64 bit client. (for EPMA )
All the components are working fine except EPMA.
All my services are running / IIS is working / ASP.net s working
Please help me !! I am stucked here.
Thanks
Aman

Ssrs report web service to save report as pdf throws error Soap exception unhandeled by user code

I am creating a C# web application to save an SSRS report as a pdf file on my local machine.
I added the ReportService web reference as RS2005 and ReportExecution2005 web reference as RE2005.
http://myServer/ReportServer_DEVPROJECT/ReportExecution2005.asmx?WSDL
http://myServer/ReportServer_DEVPROJECT/ReportService2005.asmx?WSDL
I created the following function SaveReport that is called on button click. My report can be accessed on the report server with the following url:
http://myServer/Reports_DEVPROJECT/Pages/Report.aspx?ItemPath=%2fData+Mgmt%2fSample+Letter
On the Report Manager home page the report link appears as "SAMPLE LETTER".
It is deployed in the DataMgmt folder on the Report Manager.
It uses a data source called "DS Letter" with option "Credentials stored securely in the report server"
My application gets compiled, but I get the following run time error:
Error: Soap exception unhandeled by user code. The item '/DataMgmt/Sample Letter' cannot be found. ---> Microsoft.ReportingService
s.Diagnostics.Utilities.ItemNotFoundException: The item '/DataMgmt/Sample Letter' cannot be found.
Please check my code and let me know what I can do to run this successfully. Once this is done, I would like to get help with passing a parameter (memberID) to the generate report for that member, through this application.
Thank You in advance for your help.
public static void SaveReport()
RS2005.ReportingService2005 rs;
RE2005.ReportExecutionService rsExec;
// Create a new proxy to the web service
rs = new RS2005.ReportingService2005();
rsExec = new RE2005.ReportExecutionService();
// Authenticate to the Web service using Windows credentials
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
rsExec.Credentials = System.Net.CredentialCache.DefaultCredentials;
rs.Url = "http://myServer/ReportServer_DEVPROJECT/ReportService2005.asmx";
rsExec.Url = "http://myServer/ReportServer_DEVPROJECT/ReportExecution2005.asmx";
string historyID = null;
string deviceInfo = null;
string format = "pdf";
Byte[] results;
string encoding = String.Empty;
string mimeType = String.Empty;
string extension = String.Empty;
RE2005.Warning[] warnings = null;
string[] streamIDs = null;
string fileName = @"c:\temp\samplerHAPeport.pdf";
string _reportName = @"/DataMgmt/Sample HAP Letter";
string _historyID = null;
bool _forRendering = false;
RS2005.ParameterValue[] _values = null;
RS2005.DataSourceCredentials[] _credentials = null;
RS2005.ReportParameter[] _parameters = null;
try
_parameters = rs.GetReportParameters(_reportName, _historyID, _forRendering, _values, _credentials);
RE2005.ExecutionInfo ei = rsExec.LoadReport(_reportName, historyID);
RE2005.ParameterValue[] parameters = new RE2005.ParameterValue[1];
if (_parameters.Length > 0)
//parameters[0] = new RE2005.ParameterValue();
//parameters[0].Label = "";
//parameters[0].Name = "";
//parameters[0].Value = "";
rsExec.SetExecutionParameters(parameters, "en-us");
results = rsExec.Render(format, deviceInfo,
out extension, out encoding,
out mimeType, out warnings, out streamIDs);
using (FileStream stream = File.OpenWrite(fileName))
stream.Write(results, 0, results.Length);
catch (Exception ex)
throw ex;
protected void BtnGenReport_Click(object sender, EventArgs e)
SaveReport();

Hello Devster,
Thank you to post your question on TechNet forum.
After reviewing the whole post, I have a question to you. You can access the report via the link, http://myServer/Reports_DEVPROJECT/Pages/Report.aspx?ItemPath=%2fData+Mgmt%2fSample+Letter.
From the URL, I can see that the report is located at: /Data Mgmt/Sample Letter, instead of /DataMgmt/Sample Letter. In addition, I found that the target report is "/DataMgmt/Sample HAP Letter" instead of "/DataMgmt/Sample Letter" as the error described. I
am not sure whether you post out the correct code segment.
Please check the above things on your side, and hope it is helpful to you.
Regards,
Edward
Edward Zhu
TechNet Community Support

SOAP Framework error: SOAP Runtime Exception: CSoa

I got the error 'SOAP Framework error: SOAP Runtime Exception: CSoa' when I activate my Adobe Form. The form can be activated before but the error happens when I add the fourth main body page.
Philip

Hi
1. Check if your ADS is working. Use program FP_TEST_00 / FP_TEST_01 to test your ADS if it is working.
2. Test using super user, it might caused by authorization too.
Thanks, Xiang Li

SOAP Framework Error: soap runtime exception: Csoapexceptiontransport

HI,
I am trying to execute my adobe applications in Webdynpro abap. When trying to acvtivate, the following exception raising.
SOAP Framework Error: soap runtime exception: Csoapexceptiontransport: http send failed with exception communication_failure(100.101)
Wat would be the problem here?
Thanks,
Gopi.

Check the follwoing program in SE38 Pgm FP_PDF_TEST_00 if you will get the same error then you have to check with your BASIS team to configure ADS connection parameter in Visual Admin
Kanagaraja L

WebDynpro Exception: ADS call failed SOAP Framework error:

Hi,
Can help me with this error:
WebDynpro Exception: ADS call failed SOAP Framework error: SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /Transaction system failure in method rpData./<ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1="http://sap-j2ee-engine/client-runtime-error">Transaction(100.102).
Thank you

ADS Installation and configuration:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
Troubleshooting for ADS configuration:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?quicklink=index&overridelayout=true
Landscape with ADS:
http://csc-studentweb.lr.edu/swp/Berg/Conferences/SAP_NW2008_and_Admin_2008/BI/Track13/Track13_Session4.pdf
ADS tests
http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f31e3082221595e10000000a1553f7/content.htm
Hope that helps, Otto

SOAP Framework error while activating interactive form in SFP

hi everyone,
I am new to adobe forms, I got an error while activating interactive form
SOAP Framework error: SOAP Runtime Exception: CSOAPExceptionTransport: HTTP response contains unexpected content-type(100,101).
I am unable to trace this error, can anyone plz let me understand for what reason this error occurs.
Thanks in advance.
- Aditya

Its an issue with ADS installation or configuration. Let your BASIS team know about this error with screen print. We had same issue and BASIS fixed it.
Raja

No SOAP Envelope error in SOAP Receiver Adapter

Hello Friends,
Informaiton:-
I have configured one Synchronous scenarion for SAP R/3 to PI 7.1 to Java based web applicaiton.
On the Receiver/Outbound side, i have configured the SOAP Receiver Adapter with the Target URL and SOAP Action.
Outbound and Inbound service interfaces have Request/Response and Fault messages.
Issue:-
While sending the Message, Below error is noticed in ABAP stack SXMB_MONI during the Call Adapter Stage and also in RWB (Channel Monitoring) .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: No SOAP Envelope but 1 {}RESPONSES; HTTP 200 OK
I also found that Request message is not reaching to the Java Web server.
I am taking the Same message Payload (found at Call Adapter Stage) and ussing it in XML Altova SPY Web client tool. There it is running scuccessfully and getting the Response message.
please suggest.
Thanks & Regards
Jagesh

Hi,
Yesterday i consumed the same WSDL file in Altova XML SPY and there it is working, getting the Response.
Now comparing the SOAP Request message reaching to the Third party Web server (which fall within the same Lane network)
from SAP PI and Altova XML SPY tool. I used TCP Gateway for the below scenarios.
(1)First i sent the SOAP message from PI and observed the RESPONSE message without the SOAP Envelope in TCP Gatway Trace and hence i am getting the No SOAP Envelope Error in PI.
(2)I consumed the same WSDLfile in Altova XML SPY and sent the SOAP message, here i got the Proper SOAP Response message and hence success in this case. (Used the same Data Payload as used in point 1)
(3)Now to identify the issue in the SOAP Request message being sent from PI, i used the same SOAP message sent in step 1 here, that means copy the entire SOAP ENvelope from the TCP gateway Trace and pasted it in Alota Spy and sent, there it is found running (got the response message from Third Party server).
One difference i found in HTTP Protocol statements in SOAP Request message in Point no 1 and Point no 2 above.
HTTP Protocols in Point 1 (Through PI).
POST HTTP/1.0
Accept: /
Host: 172.24.138.142:4544
User-Agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
CallingType: SA
content-id: <soap-00306EEAC2051ED1839136CEE8564900 sap.com>
Content-Type: text/xml; charset=utf-8
Content-Length: 1195
SOAPACTION: "Action1"
HTTP Protocols in Point 2 (Through Altova).
POST / HTTP/1.1
Content-Type: text/xml
User-Agent: XML Spy
SOAPAction: "Action1"
Host: 172.24.138.142:4544
Content-Length: 1195
Connection: Keep-Alive
Cache-Control: no-cache
Thanks to Mr. Stefan Grube for writting such a nice blog.
Troubleshooting SOAP, HTTP and Mail Adapter Scenarios with TCPGateway
Experts, please suggest me further.
Thansk & Regards
Jagesh

SOAP Exception from XI to R/3 via RFC

Hello,
We have a scenario where we are mapping SOAP Exception to RFC Exception.
Message status is application error in SXI_MONITOR and in payload,it shows correctly mapped RFC Exception (SOAP_EXCEPTION) with name and message.
But this message doesn't reach R/3.
Configuration is done as a registered server program in XI using a TCP/IP connection in R/3.
Can anybody please let us know what could be wrong over here?
Thanks.
Regards,
Shweta

Hi Swarup,
There is no error in RFC communication channel.
The conditions are
sy-subrc 1 for Communication failure
2 for system failure
3 for SOAP_EXCEPTION (passed in name field from XI)
but when I execute the report and this RFC is called,sy-subrc is always 0.
What could be the reason for this?
Thanks for the help.
Regards,
Shweta

SXMB_MONI : Mapping exception error - cause unknown

Hi! ALL
I am getting a mapping exception error....
However, if i copy the payload and run it through my test tab it is getting processed successfully.
Is there any other way i can debug this issue....as i do not see any problem with payload or the message mapping and I am getting the following error...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_mm_204: RuntimeException in Message-Mapping transformatio</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Your help is greatly appreciated!!
Thank you,
Patrick.

Dear Patrick,
As our experts told you can trace by using ST01 and select your ID and start the trace then again test be editing and reactivating the scenario and test it again then you ill came to know if in case any issues.
1. Other way to test the scenario is Goto RWB--> Component Monitoring --> Select Adapter Monitoring --> Then select the TEST MESSAGE TAB and give Interface details inputs or copy or take your pay load from MONI and past here and check and changes are to be made and then test the message there itself .
2. Also as u can test the message in Message Mapping TEST TAB and test the mapping and also parallely do Cache Refresh in SXI_CACHE.
3. You can also check the status of the message in SYSEM STACK of message monitoring this is different from RWB message moni
[http://Host name:PORT/MessagingSystem/monitor/systemStatus.jsp]
4. YOu can also trace the message through this system stack also.
Regards:
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Jan 30, 2009 8:53 AM

Throw Soap Exception in BPM.

Hi All,
My scenario is Soap->XI->BPM->RFC. I get a soap request in synchronous way with Request and Response messages I Map my request to a RFC and If there's any application error or mapping error I have to send SOAP fault exception to my Soap Sending system. But I don't see any option in BPM to throw soap exception only thing I can do is to map my errors in the soap response and send it to soap sender.
But my Soap sending system needs soap fault not a response message when any errors happen.
Please let me know if anybody has this same situation and how to handle it.
Thanks in Advance,
SP.

Hi VJ,
I have to use BPM as I am doing other stuff in my BPM. In my BPM I am catching mapping exception and then I have to send this to Soap Sender in SOAP fault message and in abstract interfaces we don't have option to give fault message types. Also, I am using S/A bridge and I have to close the brige in order to send some response to Soap Sender.
Is it possible to send soap fault when we close the S/A brige by send step.
Thanks,
SP.

SOAP Invoke error: Status (500): Internal Server Error

I have a BLS with a WebService action. I am testing the WebService call with each operation within the wsdl address. I used the wsdl address to make the call. I selected the only port available. There are several operations available. This WebService call is successful for all operations except for one. The operation that fails, I get the following errors in the "ServletExec.log" for this one operation. Can you tell me where the issue may be?
"SOAP Invoke error: Status (500): Internal Server Error"
"java.lang.Exception: Status (500): Internal Server Error"
"at com.lighthammer.webservice.SoapClient.invoke(Unknown Source)"
"at com.lighthammer.xacute.actions.webservice.WebServiceAction.RawInvoke(Unknown Source)"
"at com.lighthammer.xacute.actions.webservice.WebServiceAction.Invoke(Unknown Source)"
Thanks,
Chris

The Web Service had been "Reversed Engineered". In doing this, the parameters had been changed in the Web Service. This created a "break" on MII's side (i.e. MII was still trying to pass the authentication token to the parameter named "authenticationToken", instead of passing it to the parameter named "paramString1".).
Thanks,
Chris

CMSS - SOAP exception error

Similar Messages

Maybe you are looking for