CO end user information

Hi, Does anyone know where I can find some resources or material on SAP CO end user transactions. I need to educate myself on this part of SAP.
Thanks
Moiz

SAP help has been helpful to me.
http://help.sap.com/saphelp_erp2004/helpdata/en/1e/e9293504e1fd77e10000009b38f889/frameset.htm
Regards
Nadini

Similar Messages

How can i disable debug information from the end user

By changing debug flag in the url to YES it is possible to view debug information. i want to disable debug information, so that end user could not see debug information. can anyone please tell me the solution.

Sundhar,
when you export the application select Debugging:No
It's one of the available properties together with Build Status, Export Comments, Export Supporting Objects Definitions and so on.
Bye,
Flavio
http://www.oraclequirks.com

Is there a way for an end user to see who has membership in a security group

Windows Server 2008 R2
Active Directory Domain
Windows 7 workstations
I am looking for a way that my end users can look at a folder security tab and then discover who has membership in the security groups listed.
Is that possible? Any drawbacks or concerns?

Hi Tod,
Based on my research, other than viewing group membership in ADUC, we can use this PowerShell cmdlet
Get-ADGroupMember GroupName and Net Group GroupName to view members in a group:
However, these commands can only be used on Domain Controllers or when connecting to DCs remotely. That’s because accounts and account membership are stored on Domain Controllers, therefore we can only view group membership on DCs.
More information for you:
Viewing the Direct Members of a Group
http://technet.microsoft.com/en-us/library/dd391915(v=WS.10).aspx
Net group
http://technet.microsoft.com/en-us/library/cc754051.aspx
Best Regards,
Amy

Jabber for Mac - End User unable to Cut & Paste Images in IM

Full discloure: I am an END USER, not an IT admin or anything like that. Not sure if this is the proper forum to ask this question but figured it was worth a shot...
Running OSX 10.9.1 and Jabber 9.2.1.
I am unable to copy-and-paste images into IM conversations with co-workers.
My "cachedPresenceConfigStore.xml" file shows:
"<im_cutandpaste_enabled>TRUE</im_cutandpaste_enabled>"
and
"<screen_capture_enabled>TRUE</screen_capture_enabled>"
...yet these functions seem to be missing from the IM client. As far as I know our organization's service-side policy allows for sending images over IM (confirmed this using the jabber client on a windows machine).
Am I just "doing it wrong" somehow? Is there some special method I need to use to be able to paste images into an IM conversation?
Any help or direction is appreciated.
Thank you,
Jason

It appears they disabled it server-side as the button (a paperclip) normaly appears to the right of the emoticon button. While the jabber-config.xml file can block specific file extensions, it cannot disable the feature entirely. This is done within the Service Parameters of the server, which only an admin can see.
ProcedureStep 1 Choose Cisco Unified CM IM and Presence Administration > System > Service Parameters.Step 2 From the Server menu, choose an IM and Presence node .Step 3 In the Service Parameter Configuration window, choose Cisco XCP Router as the service.Step 4 From the Enable file transfer drop-down list, click On or Off.Step 5 Click Save.Step 6 Restart the Cisco XCP Router Service on every node in the cluster. For more information, see Restart CiscoXCP Router service, on page 43.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/im_presence/deployment/9_1_1/CUP0_BK_D5B4C107_00_deployment-guide-for-imp-91.html
Please remember to rate helpful responses and identify helpful or correct answers.

Getting Logged on User'Information in an Oracle-Form SSO Partner Application

Hi.
I could run Flight-of Fancy Application and capture user's information by calling the
"Parse_cookie " Procedure.(use the Scenario 2 - Access the Portal and then the FOF App)
and defined an Oracle-Form application as Partner application like FOF.
I want to have Logged on user'Information in the "Oracle-Form" . But the Fucntion owa_cookie.get dosen't work correctly.please let me know what can I do ?
Thanks in advanced.

Hi.
I could run Flight-of Fancy Application and capture user's information by calling the
"Parse_cookie " Procedure.(use the Scenario 2 - Access the Portal and then the FOF App)
and defined an Oracle-Form application as Partner application like FOF.
I want to have Logged on user'Information in the "Oracle-Form" . But the Fucntion owa_cookie.get dosen't work correctly.please let me know what can I do ?
Thanks in advanced. If you're writing your own partner application, then you are correct to get the user information from the output variables
from the parse_url_cookie procedure. You should then set the information you want to keep track of in the cookie, or combination
of cookie and persistent storage in the database. Take care of the security implications while doing this.
On subsequent calls to your application, the user info should be obtained from the cookie and the database, if you
are using a combination of the cookie and database storage to keep your info.
The owa_cookie.get routine is used to read the cookie, which is generated with owa_cookie.send.
These routines work fine, when invoked correctly.
If you are having trouble with them, you're probably not using the calls properly.
The following code provides an example of how to use the owa_cookie calls...
create or replace package testcookie
is
    procedure show (p_name IN VARCHAR2);
    procedure send
        p_name    IN VARCHAR2,
        p_value   IN VARCHAR2,
        p_path    IN VARCHAR2 default null,
        p_expires IN VARCHAR2 default null
end testcookie;
show error package testcookie
create or replace package body testcookie is
    procedure show (p_name IN VARCHAR2) is
        v_cookie owa_cookie.cookie;
    begin
        v_cookie := owa_cookie.get(upper(p_name));
        htp.htmlopen;
        htp.bodyopen;
        htp.print(v_cookie.vals(1));
        htp.bodyclose;
        htp.htmlclose;
    exception
        when others then
            htp.htmlopen;
            htp.bodyopen;
            htp.print('NO COOKIE FOUND.');
            htp.print(SQLERRM);
            htp.bodyclose;
            htp.htmlclose;
    end;
    procedure send
        p_name    IN VARCHAR2,
        p_value   IN VARCHAR2,
        p_path    IN VARCHAR2 default null,
        p_expires IN VARCHAR2 default null
    is
        v_cookie owa_cookie.cookie;
        l_agent varchar2(30);
        l_expires varchar2(30);
        l_path varchar2(100);
    begin
        if p_expires is null then
            l_expires := null;
        else
           l_expires := to_date(p_expires, 'MMDDYYYY');
        end if;
        if p_path = 'ALL' then
            l_path := '/';
        else
            l_path := null;
        end if;
        owa_util.mime_header('text/html', FALSE);
        l_agent := owa_util.get_owa_service_path;
        l_agent := substr(l_agent, 1, length(l_agent) - 1 ) ;
        owa_cookie.send(
            name    => upper(p_name),
            value   => p_value,
            expires => l_expires,
            path    => l_path
        owa_util.http_header_close;
        htp.htmlopen;
        htp.headopen;
        htp.headclose;
        htp.bodyopen;
        htp.print ('Cookie set.');
        htp.bodyclose;
        htp.htmlclose;
    end;
end testcookie;
show error package body testcookie;
grant execute on testcookie to public;If you load this into a schema which a DAD can access, then you can invoke the show and send procedures to view and
generate cookies.
To generate a cookie, issue the following from your browser ...
http://server.domain.com/pls/dad/schema.testcookies.send?p_name=test&p_value=hello
To view the cookie:
http://server.domain.com/pls/dad/schema.testcookies.show?p_name=test

Need Help to query Lync Database for User Information

Need Help to Query the lync database to retrieve below user information.
1. SIP Address of the registered user
2. Phone Number configured to the particular account.
3. IP Address
4. Last Logged in time.
I am trying to pull the above information from rtc database for all the registered users. Please let me know if this is possible and it would be great if you can throw some light on what tables to look for the data. Thank You.

Hi,
For SIP address and Phone number you can check RTC database.
IP Address:
You can refer to the link below to query IP address:
http://h30499.www3.hp.com/t5/Business-Service-Management-BAC/Monitoring-Lync-with-the-User-Registrations-Viewer-Free-NMC-tool/ba-p/5961497#.UtOU43mIrwo
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Last Logged in time:
You can refer to the link below:
http://blogs.technet.com/b/dodeitte/archive/2011/05/11/how-to-get-the-last-time-a-user-registered-with-a-front-end.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

Is there a way to have an AppleID for an end-user without credit card info attached to it?

I am in charge of managing the Macs in our department. We have purchased a volume license for Mountain Lion (can't jump to Mavericks yet until we upgrade other software). I have a code to redeem, but the end-user is supposed to have an AppleID. I went ahead and started creating one for her, but it asks for credit card information, and corporate does not wish to have this information attached to an end-user's ID - they just want to supply it at the time of purchase for any future purchases (fear of identity theft and/or unauthorized purchases, I guess).
Our Mountain Lion software is already purchased, so Apple shouldn't need the credit card info for us to be able to install it. I can't install Adobe's Creative Cloud software until she's at least up to Mountain Lion … I feel I am hitting a major roadblock here! Any suggestions? Is this a new requirement? My own AppleID (for work) that I've had for awhile has no credit card currently attached to it … must not have been required at the time.

Try this on that Apple ID to get the None payment method option;
This user, mountaingoatgirl, explains how to get a None option in your account details in the iTunes app on a Mac or PC. -
https://discussions.apple.com/message/24907941
Then in the future use Apple's suggested method to create Apple IDs that don't require a credit card.
Creating a new Apple ID for an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
http://support.apple.com/kb/HT2534

Help! ADF default behavior rejected by end users...

Hi,
We have built an ADF 11g application during the past months. Last week we had our first user acceptance test with a small group of users. The users were very satisfied about the nice looks of the screens. But they had quite a lot of issues with the default behavior of ADF. I'll provide a list of the most important issues below. I hope more people here at OTN have experienced these issues and perhaps have some workarounds. And perhaps Oracle can use lists like this to improve the next version of ADF...
<ol><li>Multi record edit We have a lot of multi record edit screens. These are all editable tables. Those tables have the following problems:
<ol type="a"><li>Whenever a partial refresh occurs, the whole table gets reloaded. This takes some time, which is uncomfortable. But the main problem here is that the table does not preserve the scroll bar position. The situation can be improved a little bit by setting the <tt>displayRow</tt> attribute to <tt>"selected"</tt> on the table. This will cause the table to show the selected record at the top of the view port after a refresh. But this still confuses the end users. In their experience the records are randomly jumping around.</li>
<li>Records are not always inserted at the bottom. (In fact, they are inserted above the selected record.) End users simply expect records to be inserted at the bottom of the table, no matter what. And I can't disagree with them. Isn't there a setting to achieve this in ADF?</li>
<li>Whenever the user navigates to another record in the editable table, all validation rules on the record he navigates from are fired. That means he cannot leave a required field empty to fill it later. The end users say this is very annoying. We would like to delay all validation until the user presses the Commit button. But as far as I know this is not possible, is it?</li>
<li>The selected record position is not preserved on a full refresh. Our Commit button forces a full refresh of the page. This sounds like a sensible choice to me. However, users tend to click on Commit quite often. But after a full refresh of the page, the currently selected record in a record set is always reset to the first record in the set. In a large data table, this annoys the users very much. Isn't it possible to preserve the selected record over a full refresh?</ol>
<li>Annoying validation errors Many end users are annoyed by the somewhat "persistent" validation error messages. In a larger form or an editable table, users sometimes want to ignore an error and first enter other data, before correcting the error. This is hardly possible, because ADF sets the input focus to fields with errors and keeps popping up windows with a list of fields that have errors. We would like to make the validation less "aggressive". It is okay to give a field a red border if it contains an error. But leave the input focus where it is. And don't show any popup until the user presses the Commit button. And even then show the popup window only once.</li>
<li>ADF BC caching and business rules in the database We have some business rules in our database that automatically fill some fields with default values. We have e.g. a master-details relation, where a value in the master record is calculated based on the values of the detail records. We have set the calculated field in the master record to "refresh after update" and "refresh after insert". Sometimes the value of the field gets refreshed, but sometimes not. Users know that the field should be calculated by "the system", and are asking if they did something wrong if it doesn't. I know we could do the calculation in ADF, but our policy is to have all business rules in the database and to not repeat ourselves (DRY). Is there another way to guarantee that the calculated value in the master record gets updated after an update or insert of one or more detail records?</li>
<li>Partial refresh loses data If a field causes a partial submit to occur, fields in the same record that were not (partial) submitted before lose their data. This forces us to enable partial submit on all fields. But that causes a delay after moving the focus to the next field and validations to be fired too early.</li>
</ol>
I've numbered the items above, please use these number as a reference if you're posting an answer to a specific question.
Please let me know any solution, even if it is only a partial solution. We've a nasty situation now. Our application is (nearly) finished, but it is blocked for production by the users because of the behavior of the ADF framework, on which we have very little influence. We can't blame the users for that, most of their criticism is fully justified. So we have to come up with a good solution for these issues before we can go to production. So any help would be highly appreciated!
Best regards,
Bart Kummel
PS.
We're using JDeveloper/ADF 11.1.1.1.0, we deploy to a WebLogic 10.3.1 server and we have an Oracle 10g database. We're using the full ADF stack: ADF Business Components, ADF Bindings and ADF Faces.

Hi Bart,
I can answer for few of your questions.
Bart Kummel wrote:
Hi,
We have built an ADF 11g application during the past months. Last week we had our first user acceptance test with a small group of users. The users were very satisfied about the nice looks of the screens. But they had quite a lot of issues with the default behavior of ADF. I'll provide a list of the most important issues below. I hope more people here at OTN have experienced these issues and perhaps have some workarounds. And perhaps Oracle can use lists like this to improve the next version of ADF...
<ol><li>Multi record edit We have a lot of multi record edit screens. These are all editable tables. Those tables have the following problems:
<ol type="a"><li>Whenever a partial refresh occurs, the whole table gets reloaded. This takes some time, which is uncomfortable. But the main problem here is that the table does not preserve the scroll bar position. The situation can be improved a little bit by setting the <tt>displayRow</tt> attribute to <tt>"selected"</tt> on the table. This will cause the table to show the selected record at the top of the view port after a refresh. But this still confuses the end users. In their experience the records are randomly jumping around.</li>You can set the fetchSize in the iterator to a minimum value (Say if you are displaying 20 records in the table at a time, you can set the fetchSize to 20, so that, it will fetch only 20 records at a time, and the remaining records on demand basis, i.e they will be fetched when you scroll in the table).
<li>Records are not always inserted at the bottom. (In fact, they are inserted above the selected record.) End users simply expect records to be inserted at the bottom of the table, no matter what. And I can't disagree with them. Isn't there a setting to achieve this in ADF?</li>I suppose you are using the default createInsert operation. You can write your own method instead of the default createInsert, which would have something like
public void customCreateInsert(){
vo.last();
vo.createInsert();
}You can expose this method as method action and use it in place of default CreateInsert.
<li>Whenever the user navigates to another record in the editable table, all validation rules on the record he navigates from are fired. That means he cannot leave a required field empty to fill it later. The end users say this is very annoying. We would like to delay all validation until the user presses the Commit button. But as far as I know this is not possible, is it?</li>You can set the immediate property to true for the column for which you want to skip the validation. However, the validation will fire when you submit / commit the changes (which is expected).
<li>The selected record position is not preserved on a full refresh. Our Commit button forces a full refresh of the page. This sounds like a sensible choice to me. However, users tend to click on Commit quite often. But after a full refresh of the page, the currently selected record in a record set is always reset to the first record in the set. In a large data table, this annoys the users very much. Isn't it possible to preserve the selected record over a full refresh?</ol>Again, you can have a custom method, which would get the current row, commit the transaction and do a setCurrentRowWithKey to point to the last selected record after commit.
<li>Annoying validation errors Many end users are annoyed by the somewhat "persistent" validation error messages. In a larger form or an editable table, users sometimes want to ignore an error and first enter other data, before correcting the error. This is hardly possible, because ADF sets the input focus to fields with errors and keeps popping up windows with a list of fields that have errors. We would like to make the validation less "aggressive". It is okay to give a field a red border if it contains an error. But leave the input focus where it is. And don't show any popup until the user presses the Commit button. And even then show the popup window only once.</li>You can add a af:messages tag in the top and set globalOnly to true. Also, set the immediate property for the items to skip the validation when they tab out.
<li>ADF BC caching and business rules in the database We have some business rules in our database that automatically fill some fields with default values. We have e.g. a master-details relation, where a value in the master record is calculated based on the values of the detail records. We have set the calculated field in the master record to "refresh after update" and "refresh after insert". Sometimes the value of the field gets refreshed, but sometimes not. Users know that the field should be calculated by "the system", and are asking if they did something wrong if it doesn't. I know we could do the calculation in ADF, but our policy is to have all business rules in the database and to not repeat ourselves (DRY). Is there another way to guarantee that the calculated value in the master record gets updated after an update or insert of one or more detail records?</li>We need some more information. Do you see any "pattern" on which this things occur?
-Arun

SP2013 WF works for admin but not end-users

A simple SP2013 WF calls a SP2010 WF to send email, simple. Works for me (admin) but when a SP user edits an item on the list (which fires the WF), the WF gets to the 2010 call, and fails with this error...
RequestorId: f8c56627-e4e5-5a26-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"X-SP-SERVERSTATE":["ReadOnly=0"],"SPClientServiceRequestDuration":["61"],"SPRequestGuid":["f8c56627-e4e5-5a26-97ee-ad70ca4d3291"],"request-id":["f8c56627-e4e5-5a26-97ee-ad70ca4d3291"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["16.0.0.2930"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Wed, 25 Jun 2014 02:44:54 GMT"],"P3P":["CP=\"ALL IND DSP COR ADM CONo CUR CUSo IVAo IVDo PSA PSD TAI TELo OUR SAMo CNT COM INT
NAV ONL PHY PRE PUR UNI\""],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]} at System.Activities.Statements.Throw.Execute(CodeActivityContext
context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager
bookmarkManager, Location resultLocation) Exception from activity Throw If Sequence Sequence TryCatch Sequence Microsoft.SharePoint.WorkflowServices.Activities.RetryForDurationPolicy HTTPPost_WorkflowInterop_EnableEvents WorkflowInterop DynamicActivity<Guid>
Then If Working Sequence Flowchart Sequence RCSEmailCst.WorkflowXaml_4f7b53dc_968d_4e22_a812_3178e7b01bad
Spent an hour on phone with M$ support, only to be told it's my fault and I have to re-design my WF...if my WF gets any simpler I'll have to use carrier pigeons to get messages to customers!
I've Googled the error message, results suggest that User Profile Syn is out of whack but M$ support swears up & down our sync is working fine.
Anyone?
Edit to add: we have a hosted implementation of SP2013, NOT on-prem

Hi ,
According to your description, my understanding is that the SharePoint workflow 2013 does not work for end-users in your environment.
For your issue, it can be a permission for the user initiating the workflow. Please make sure site feature Workflows can use app permissions is activated. Go to Site actions > Site Settings >
Site features > Workflows can use app permissions. Make sure the user is one member of a SharePoint Group.
Also please provide more detail information about the error message to determine the exact cause of the error. You can have a look at the blog:
http://ranaictiu-technicalblog.blogspot.com/2013/03/sharepoint-2013-workflow-debugdiagnosis.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

Activating a Windows 7 installation (for an end user) as a MS Registered Refurbisher.

I have applied to join the MRR program and have passed the test and am awaiting approval.
I was reading in the MRR manual that MS prefers that a refurbished PC is set up with sysprep so that the end user has to accept the license agreements and activate before using Windows.
However, the manual went on to say that the Refurbisher can choose to activate windows as a courtesy for his customers as long as he configures the PC to display the license agreements when the end user uses the PC for the first time.
This is probably a stupid question, but how is this achieved? Can Sysprep be somehow set to retain the activation information?
Or is this achieved using one of the tools on the OEM Preinstallation Disk or with the RPK tools described in the MRR manual?
Thank you for your patience with me :)

Hi,
Regarding to sysprep, the activation information will be removed or I mean it doesn't work (even the reference PC is activated) when you deploy the image to other computers.
This is the exact sentence from TechNet website
You cannot make an image of an activated Windows installation and duplicate that image to another computer. If you do, Windows fails to recognize the activation and forces the end user to reactivate the installation manually.
http://technet.microsoft.com/en-us/library/cc766514(v=ws.10).aspx
Add:
For a Refurbished PC, the PC has two labels; either the original Certificate of Authenticity (COA) label the PC manufacturer installed or the Genuine Microsoft Label AND a COA from the PC refurbisher. for manually activation, the end user can only use
COA from the PC refurbisher.
Yolanda Zhu
TechNet Community Support

When creating a fillable form fields from an existing pdf file, how do you set or allow end user to set the font size in the fields?

I successfully created a form filled pdf using an existing pdf document. However, the font size is too large to allow end user to type in information in the form box. Is there a way to 1)globally set all of the form fields when generated to a much smaller font size &/or 2) allow end user to change the font size if needed to put all information in one box without font being so large?

Hi DenisonDoc,
There is no option right now to set properties globally primarily for Text fields. You may make sure fields doesn't contain anything.
Select all the text filed from the form and right click any of the selected field make sure all of them are selected choose properties --> Appearance there you can choose Font Size and Font type.
- End users cant change size and type of font. It is up to designer.
Regards,
Ajlan Huda.

Auto-populate form fields based on end user input?

I'm currently attempting to create a new form that has a combo box "Locations" with various options. What I'm looking to do is have another text field auto populate other fields related to that location (such as address, contact information) to save on time and reduce opportunity for end user errors in input.
What are my options for accomplishing such a task? Some form of binding fields with a MS database possibly?
Thanks in advance for any advice and assistance on this matter!

Paul,
The form and (potential) database would be located on a shared drive on the company network in which those that would use the form already have access to.
The pc's that user's would be using have Reader 9.
The pc I'm using for developing this form has LC Designer 8, Acrobat Professional 8, and Reader 9.
Ideally, I would "like" for the end user to have the ability to add new locations, addresses, etc ... in the event it is needed, although this would not be likely to come up.
Based on the software I have on hand, and the need to not incur additional expenses, what would you suggest?
Thanks again Paul!

Allowing end-user to create a user using a form

Hi all,
I'm working on a project whereby I must allow end-users from anywhere to create an account for themselves (Register).
Which table/object should I create a form on to enable users to register.
(APEX 3.1.2)
kind regards
Mel

Hi Mel,
I just set up custom authentication for the last application I developed. The user table is pretty simple and you can easily hash the passwords. I even developed a process where a person can change their own password and the process email them of any such changes. Course, that requires an email address to be a column in the user table.
There is a relatively new Apex book out titled Pro Oracle Application Express. It has a lot of good information concerning custom authentication. It takes you through the whole process, step by step. Also, the book is excellent in itself and definitely worth having. It has a lot of good information in it.
Tony (not Tony Miller, another Tony, he he)

Presently using iMac: OS X 10.9.4 (13E28) 1. Open website; click drop-down and this appears: Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser. 2. Usi

Presently using iMac: OS X 10.9.4 (13E28)
1. Open website; click drop-down and this appears:
Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser.
2. Using an iMac, open founder and click downloads
3. Click AdbeRdr1013_en_US-1.dmg Apr. 4 2012, 7:11 AM 73 MB Disk Image Feb 27, 2013, 10:00 AM
4. Screen indicates it is opening Adobe reader X installer.package
5. Click this icon
6. Open Adobe installer; double-click install Adobe reader; putting password to access; click next; Note: Application is already installed; click finish.
Screen indicates: thank you and enjoy Adobe reader. Click Return to Prior Website. Click install now: total size 99.1 MB
Initializing arises with the following information: to proceed, open your download folder and locate the Adobe reader installer file, named Adobe reader installer [ XXX].dmg
It takes me back to steps that have already taken of locating down load file double-click to mount the disk image; double-click install Adobe reader; agreed by clicking open; entering name and password and clicking okay.
Did this several times with no success.
11. www.forums.adobe.com

Sorry if I failed to mention, I have done this as well.

CO end user information

Similar Messages

Maybe you are looking for