When creating a fillable form fields from an existing pdf file, how do you set or allow end user to set the font size in the fields?

I successfully created a form filled pdf using an existing pdf document. However, the font size is too large to allow end user to type in information in the form box. Is there a way to 1)globally set all of the form fields when generated to a much smaller font size &/or 2) allow end user to change the font size if needed to put all information in one box without font being so large?

Hi DenisonDoc,
There is no option right now to set properties globally primarily for Text fields. You may make sure fields doesn't contain anything.
Select all the text filed from the form and right click any of the selected field make sure all of them are selected choose properties --> Appearance there you can choose Font Size and Font type.
- End users cant change size and type of font. It is up to designer.
Regards,
Ajlan Huda.

Similar Messages

When creating a fillable form and saving it as a pdf, the default color of the data fields is a light blue. How do I change the color to something else that will copy better, e.g. a light yellow?

When creating a fillable form and saving it as a pdf, the default color of the data fields is a light blue. How do I change the color to something else that will copy better, e.g. a light yellow?

It's probably the fields highlight color of the application, which you can change via Edit - Preferences - Forms.

How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE ?

We are using B2B & OSB to send out messages via eBMS protocol
So basically this are the two use cases
1) EBusiness Suite => B2B => OSB=> Customer for the outbound Shipment Notices
2) EBusiness Suite <= B2B <= OSB<= Customer for the Inbound acknowledgement
We are able to use standard B2B functionality to send out the messages using eBMS with https and client certificates
On the way back from the customer, we are using OSB that gets the raw data and the body gets sent to B2B
On the outgoing part a message gets created in B2B and is at MSG_WAIT_ACK
When the acknowledgement comes in, it comes as a seperate messgae in B2B and is at MSG_COMPLETE
How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE?
We use JMS and have played around with jca.jms.JMSProperty.INREPLYTO_MSG_ID but that is not propagating to REFER_TO_MESSAGE_ID in B2B_BUSINESS_MESSAGE table
I tried using jca.jms.JMSProperty.CONVERSATION_ID as well but no luck
Any response is highly appreciated!

Are you asking about your own JavaMail code or about somebody else's web-based mail agent?
If it's the latter (which is what it sounds like) then you find the checkbox in the preferences configuration, or whatever they call it, which says "Include original message in reply", or something like that. If such a thing exists, that is. If you're thinking that the e-mail message controls how their code formats replies to it, that's not how it works.
Even Outlook lets you configure how replies are formatted, the only difference is that the Outlook default is to include the original message and your web-based agent's default is to not include it.

How do I delete some pages from an existing pdf file?

I have an existing pdf file that is too large to send to some people. How can I delete some pages from this existing pdf file, and break it up into two files?

Acrobat
You can download a 30 day trial at that link.
You may also be able to do it with CreatePDF, but I'm not sure.

How do you set the number of rows in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

How do you set the number of rows you want in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

After the discovery reported above, I filed this report :
Bug ID# 10073038
Summary:
When Numbers is used on a system with decimal comma a csv file may be good AND wrong
Steps to Reproduce:
With Numbers v2, you introduced an interesting enhancement.
In system using the comma as decimal separator, Numbers requires csv files using the semi-colon as values delimiter.
In fact it’s true if we OPEN the document dragging its icon on Numbers one or thru the open dialog.
This said.
(1) Drag and drop a csv built with the 'semi-colon' standard on a table or on a sheet
(2) Drag and drop a csv built with the 'comma' standard on a table or on a sheet
Expected Results:
Every normally constituted user assume that in
case (1) he will get a perfectly built table
case (2) he will get every cells of a row in a single cell
Actual Results:
In fact you forgot the drag and drop way of use and in
case (1) every values separated by semi-colon are inserted in a single cell
case (2) values separated by comma are correctly spread in a table
isn’t it ridiculous ?
Regression:
Except looking in QuickView to see which is exactly the structure of the file to decide the way we will insert it in a Numbers document, we may use an applescript fair enough to replace the semi-colons by TAB characters
or
to replace the commas by TABs and the decimal periods by commas
Notes:
While I am on this subject, I wish to make two proposals:
(1) It would be fine to format the date according to the ISO format year-mm-dd when you export a Numbers doc to csv.
Doing that, dates would be imported correctly in every countries.
At this time, on an English system, you export as mm/dd/year.
If the doc is open on a system using the format dd/mm/year, the results will be odd.
On a system using the format dd/mm/year, you export this way and so, if the doc is open on a system using the format mm/dd/year the results are odd too.
As every localized versions accept the ISO format (at least on entry), using it in the export scheme would give a correct behavior everywhere.
(2) It would be fine to add the format Tab Separated Values in the Export pane.
TSV + ISO date format would give documents opening flawlessly everywhere.
Yvan KOENIG (VALLAURIS, France) dimanche 4 septembre 2011 21:27:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Just moving from PC to Mac. How do you select a group of items. On the PC it was shift right click

Just moving from PC to Mac. How do you select a group of items. On the PC it was shift right click

In list or column view, click the item at one end of the range and then shift-click the item at the other end.
In icon view, click on an empty part of the window and drag to select them.
(113533)

How do you set the left hand margin when writing emails. Some characters disappear off of the left side of the page because the margin is so close to the edge

When writing emails the left hand margin is so close to the edge of the page that some characters disappear from view on the left hand of the page. How can I set the left hand margin to not be so close to the left edge of the page?

Oy. You beat your head for hours and finally concede to asking for help, only to solve it two minutes later. Here's the answer.
In the inspector, on the Layout tab, there's a checkbox that reads, "Show Thumbnail Track".
UNCHECK that box and the gutter goes away.

Error message when receive a fillable form back from patient

Hello:
The image below is an error message we received when the patient emails us back the survey form we have emailed to them.
How do we fix so we can gather the data that was sent to us?

Could you please confirm if you are receiving .FDF file as an email attachment.
If this is the case then the above message is expected.
FDF file just contains the response data and it requires original PDF where it can merge the data to show the final output.
Steps to avoid this workflow:
1. Use the complete PDF format on submit button.
2. If you have the original PDF then save the FDF file separately and merge the data using following option:
     a. Open the original PDF in Acrobat.
     b. Go to Tools -> Form -> More Form Options -> Import Data
          and then locate the FDF file on your machine.

Can I create a fillable form in Pages and then PDF to iWeb?

I'm a teacher and I'd like to be able to upload some PDF documents for my students to download, but would LOVE it if I could make sections of the document available for them to fill out answers, so they could, in turn, save as PDF and send back to me!
Is this possible?
I know how to get the documents into iWeb and that is working fantastic.
But I don't know how to create an area on a page that students can write in. Do I have to maybe do the whole thing in PDF Writer (never used it but have heard that it might have that capability).
THANK YOU!
--MacMeg in Neverland

treivisone wrote:
But my problem is that i want to export my Pages' page directly to iweb to put it as a podcast. I'm working for an association that wishes to make all the content on itunes...
Ummm.... I know a lot about podcasting, but to my knowledge there is not a way to "embed" a document in a podcast episode. The XML specifications do not do that. However, in the content of an "enhanced" podcast, you can link to a document which can be downloaded while "viewing" the podcast. For an example of that, see my podcast episode:
http://spot.pcc.edu/~dleighto/podcasts/psy201a/episode20080117133153-0800.m4b
If you go to about 29:30 in the podcast, and have opened the artwork/video viewer, you will see a link at the bottom of the viewer pane to download the file. That file, however, is stored separately from the podcast episode. In iWeb, you would set that file up on a downloads page. Then in the podcast episode, you specify the path to access the file. When the user clicks on the link in the viewer, it downloads the file.
Is that what you want to do?

How do you set default fonts and default text box sizes on bound form fields?

I am using an existing PDF as a template to build my form in designer.
I am dragging my objects from the schema window to the form and when I drop it on the form it is way too big - so for every field I do this with I am left to resize and reset the font to every bound object i drop on the page!
Is there a way to set the default font and the default dimensions of the bound text boxes I am droping on the PDF form page?
Thanks to anyone who can help!

iWork '09 DVD set (containing Pages '09 v4.0, Numbers '09 v2.0, and Keynote '09 v5.0) is available from Amazon for USD $20. Apple no longer provides retail store, or OS X App Store downloads. You will need to apply the Apple iWork 9.3 updater afterwards to bring these applications to their n.3 (e.g. Pages '09 v4.3) last versions. You will have an /Applications/iWork '09 folder afterwards.
I would also launch /Applications/Utilities/Disk Utilities, select your boot drive, and verify/repair permissions — just to be on the safe side for the newly added iWork '09 applicaitons.

How do you set the From field in Mail?

Is there any way to set the From field in messages. I have two email addresses:
an .edu address at an university
a .net at my ISP
I’d like the From field to be my .edu addreess. Mail sent to my .edu address is forwarded to an address of my choosing, which happens to be my .net address. I would, however, like to keep my .net relatively hidden so I can change ISPs. We did that year switching from cable to DSL.
I tried changing Mail Preferences->Accunts->Email Address
to my .edu address. That, however, did not work. My DSL provider ignored the Email Address field and inserted my .net address in the from field. (I believe this method worked when I had a cable ISP.)

Since my last post, I found tried putting
Preferences->Accounts->Email address to be my edu address
would add my .edu address as one of my from choices
Next, I sent myself a mail message, with following result:
The .edu address is now rejected by the outgoing server with the message:
Cannot send message using the server
The sender address (my .edu address) was rejected by the server
I had this working at some time, but not now. Help, please.

How to Create a Table of Contents From an Imported PDF File?

I have imported a 150 page PDF file into inDesign 5. I want to create a Table of Contents for my document, but there are no paragraph or heading styles in the document. If I built the document in inDesign, I would have labeled each chapter "Heading 1" and then instructed inDesign to collect up all the Heading 1s and make a TOC automatically.
But I didn't create this PDF, it has no formatting at all. Its just been placed in the inDesign document space.
Anyone have any tips of how I can pick out all the Chapter headings.....they are in a distinctive format (14 point bold) from the rest of the document text.
Anyone?

InDesign cannot read *anything* out of a PDF file.
Open in Acrobat, copy heading, paste in InDesign. Repeat until done.

How do you set the from field in mail to be one of two addresses?

I have two email addresses. How do I set up mail so I select which of the addresses goes in the from field?

The From field should include a drop down menu from which you chose the address you want to ue for that message.

Photo elements wants to open last used dir location. When it doesn't exist or cannot access, it fails to open. How do you set the default file location?

Upset!!!
Photo elements wants to open at the last used folder location. When it does not exist or unable to open that location. It FAILS to OPEN.
Does not seem to be a way to set a default location or to change the location.
VERY ANNOYING.
How do you tell photo elements to always go to a set location rather than the last used location?
Thank you

Hi,
I did a test as you suggested - open an image on a removable drive, close the editor and took the removable offline. When I next went to the editor, it opened OK.
From the screen shot in message #5 above, I think that the fault is with SolidWorks. I am not familiar with that product but it seems to be a form of asset management and it can't open its database - is that on the removable?
Normally, the editor does not open any files when it loads except for it program files and any addins. Could SolidWorks be an addin?
See if this works to reset the preferences.
Create a desktop shortcut for this file
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
Hold down the Ctrl, Shift & Alt keys when you double click on the shortcut. Keep the keys held down and eventually a message box will pop up asking if you want to reset the preferences - you do.
Brian

Creating a self signed certificate - how do you set the 'storepass'

Hi, I'm trying to use the ADT to create an AIR 2.7 file, but it's the first time i've used the command line tool to build one and am having problems understanding the signing process.
I can generate a cert.p12 keystore file from within the flash IDE, and this asks for a password for the file (-storepass)
I can also use ADT to create a self-signed certificate from the command line, here you can specify the -keystore (cert location) and -keypass (password for the key in the store)
I cannot find a way of generating a self-signed certificate where you can specify both passwords though, one for the store (-storepass) and one for the key (-keypass).
This is a problem because when i go to package my AIR file using ADT it needs both passwords -storepass and -keypass before it can publish it.
Does anyone know how to generate a self-signed .p12 certificate and have control over both the keys...?
I have spent hours playing and searching now so may have the wrong end of the stick, could do with some help getting past this issue.
Thanks
Sean

There is only one password is required to package for ipa as far I know
Sample command:
C:\AdobeAIRSDK\bin\adt.bat -package -target ipa-test -storetype pkcs12 -keystore [KEYFILE].p12 -storepass [KEY PASSWORD] -provisioning-profile [MOBILE PROVISION FILE].mobileprovision [IPA NAME].ipa [XML FILE NAME].xml [SWF FILE NAME].swf Icon_29.png Icon_48.png Icon_57.png Icon_72.png Icon_512.png Default-Landscape.png Default-Portrait.png Default-PortraitUpsideDown.png Default-PortraitLandscapeLeft.png Default-PortraitLandscapeRight.png

When creating a fillable form fields from an existing pdf file, how do you set or allow end user to set the font size in the fields?

Similar Messages

Maybe you are looking for