Allowing end-user to create a user using a form

Hi all,
I'm working on a project whereby I must allow end-users from anywhere to create an account for themselves (Register).
Which table/object should I create a form on to enable users to register.
(APEX 3.1.2)
kind regards
Mel

Hi Mel,
I just set up custom authentication for the last application I developed. The user table is pretty simple and you can easily hash the passwords. I even developed a process where a person can change their own password and the process email them of any such changes. Course, that requires an email address to be a column in the user table.
There is a relatively new Apex book out titled Pro Oracle Application Express. It has a lot of good information concerning custom authentication. It takes you through the whole process, step by step. Also, the book is excellent in itself and definitely worth having. It has a lot of good information in it.
Tony (not Tony Miller, another Tony, he he)

Similar Messages

Allow end user to save form entries

I am using Acrobat Pro8. I am creating a live form and want the end user (Using Acrobat Reader) to be able to fill in and save, not just print. Is that possible? I can not figure out how to save the doc so that that is possible. Thanks for any help w/his.

The end user license agreement is at http://www.adobe.com/products/eulas/pdfs/Gen_WWCombined-20080205_1329.pdf
You will specifically want to read section 15.12.3.

When creating a fillable form fields from an existing pdf file, how do you set or allow end user to set the font size in the fields?

I successfully created a form filled pdf using an existing pdf document. However, the font size is too large to allow end user to type in information in the form box. Is there a way to 1)globally set all of the form fields when generated to a much smaller font size &/or 2) allow end user to change the font size if needed to put all information in one box without font being so large?

Hi DenisonDoc,
There is no option right now to set properties globally primarily for Text fields. You may make sure fields doesn't contain anything.
Select all the text filed from the form and right click any of the selected field make sure all of them are selected choose properties --> Appearance there you can choose Font Size and Font type.
- End users cant change size and type of font. It is up to designer.
Regards,
Ajlan Huda.

How to deploy rpt chnges to end users using Windows Installer?

We are in ISV and we develop an integrated suite of business management applications. We use Crystal Reports extensively in these applications. We currently deploy 717 rpt files with our suite.
Because rpt files are not versioned, we are having problems deploying rpt changes to our end users using Windows Installer. Windows Installer assumes that non-versioned files contain user data, so if the file exists on the users system, the file is never over written, even if the file included in the MSI is newer than the file on the users system.
Is it possible to version .rpt files? How do you recommend deploying these files so that if we change a few of then, we will be able to deploy the changes to our end users.
Thanks,
Todd

Hi, Todd;
There is a Revision Number property in a report that is updated when any changes are made. You can access this via the File | Properties screen, but I am not sure if you can use it in an installer.
Regards,
Jonathan

Error while Creating user using Custome form

Hi,
I created a custom form same as create user form
updated in xlDefaultAdmin.properties,xlWebAdmin_en_US.properties,struts-config.xml
on this custom every thing is working fine but when on submit(Create User) it gives me below error
in Admin Console : You do not have permissions to perform this operation.
in App server log: maoRejections:You do not have permission to insert this object.

My response is based on the following assumptions:
Your custom form is similar to that of CreateUser form in all manners. The logic at the back-end has been written by you as well. As soon as you get all the values you call the createUser API of OIM to create the user. You have wriiten your custom action classes as well.
The insert error may be due to the reason that the user which you are using to create the user doesn't have sufficient permissions. In other words, if this is done through Java code then while instaniating the API, the user used must be missing these permissions.
If the error is due to this permission for users then we can give these additional permissions to individual users, if in case its not and you have some other scenario then just give me more details, probably I can help you for it.
Thanks
Sunny

How to send HTML email to End User using OOTB email processs?

Hi,
We are using OOTB Send email process to send email to end user.
Templates has been created inside /etc/workflow/ProjectName/email folder.
Its working properly for plain text email.but for html template ,It send the email with html tags.
Any pointer on how to write html template for OOTB email process and activate email type as html ?
Thanks
Deepika

Thanks Sham..
I am able to send HTML email following above link.
The problem i am facing is,When i am deploying the code through crxde.Code is working fine.
But using maven deploy..Bundle get activated ..But at line:
messageGateway = this.messageGatewayService.getGateway(HtmlEmail.class);
,it gives null Pointer exception.
Any pointer,why its not working from maven deployment.
Regards
Deepika

Allowing end users to build search queries?

We have several large document libraries that have a significant amount of metadata columns tied to them. I'd like to create away for users to build queries based on those columns.
I'm picturing a page that displays all of the properies for a given list allowing the user to enter search criteria as desired. for example - ten fields are listed but the user might choose to enter three fields - invoiced date, a customer type and a country
which then returns the results. The next user might enter an invoice total, sales rep and ship date.
Can anyone suggest how to build this type of thing? I'd describe it as an end-user query builder, but that might not be the best way to describe it.

I'm starting to wrap my head around this a bit more and I think the complication is that several of these metadata fields are 'Single Line of Text'-fields.
Metadata navigation would seem to be a perfect solution if it allowed for these 'Single Line of Text'-fields to be filtered.
Is there anything that I might make this a workable solution?

Reset passwork for end user using XE version 2.1.0.00.39

Hi All,
I would like to create a link "Change Password" for end users to able to change their password anytime. I've followed the link below
Self Reset Password
but it still require the admin login before end users can change their password.
The following steps that I did:
1. Under "Shared Components", create a Navigation Bar entry name "Change Password".
2. On page 1, click on the "Change Password" link under Navigation Bar and entered
Target Type = URL
URL Target = javascript:popupURL('f?p=4350:53:&SESSION.:::53.F4350_P53_USER_NAME::APP_USER');
How do i make the "Change password" link go directly to reset password page after end users clicked on it without admin login require? I'm using a default authentication and all end users assigned to user group.
Thanks in advance,
Kevin

Kevin,
You want the users to go to popup page 58 (in application 4350). See this thread: Re: Pop Up Change Password Window . But I don't know if that will work in 2.1.
In general, you're better off using other types of account management tools such as LDAP.
Scott

Allow end user to Remote Contorl or Remote View a workstation?

With ZENworks 7 we have certain operating room computers setup with remote
view capabilities to one specific workstation. These doctors needed remote
view capabilities to a computer that displays useful live medical
information.
This was done by using the software called "ZEN Workstation Browser" which
avoids needing them to start ConsoleOne to initiate a Remote View session
and of course, privileges are all controlled within eDirectory.
Does anyone know if this kind of capability might be possible with ZENworks
11? Can an end user be given limited access to ZCC such that they only have
the ability to remote view a specific workstation?
We're starting to roll out our agents and I'm not sure how to deal with this
unique setup. Because multiple computers may view that one workstation,
using RDP is not an option.
Thanks,
Marc

Marc Charbonneau,
Have you tried the ZENworks Remote Management viewer tool?
Else, then yes, you can give some users the rights to remote using the
ZCC.
Niels Poulsen
Novell Knowledge Partner
A TRUE RED DEVIL

How to set an 'alert' or reminder message for end-user Acrobat X form.

Hi,
I'm trying to see if I can add an alert or reminder message for the end user who will be filling in a form that I'm creating from Acrobat Pro X.
Does it require a script if so, could anyone share one that is already exists?
If it doesn't need a script, how can I set that up?
What I want to do, is to remind end-user to fill in Numbers Only and not text. I have already set my properties for numbers only and provided an example. But, In-case end users did not understand, I'd like to have a message for them to say that they must type in number and not text.
Currently, with the limitation I've made, they couldn't type in any letters but, they might be frustrated and not fill in anything!
Please help!
Thanks,

Thank you for the code.
Is it correct to put that code under VALIDATE > run custome validate script, within the Properties box?
Because I tried it, and it worked only AFTER I typed a number onto the field.
Since my goal is to have the alert BEFORE, so if someone typed in a text, they should see the alert and correct themselves to type in a number instead.
Please clarify.
Thanks!

Allow standard users to save form data

Apologies if this has been asked before, I did a search but didn't find anything.
My client wants me to create a set of PDF forms that their sales team can use. The crucial features are:
Create a PDF with editable form fields
All font, styles and layout cannot be editable by standard users (using free version of Reader)
Users with standard Reader users can open, edit and save these forms including the data they contain
The main thing my client wants to achieve is sending out sales documents that are always nicely formatted (users can't change text size, style, add random pictures, etc.)
I have Adobe Pro version 9.4.5. I've tried the following:
Choose Advanced > Enable User Rights In Adobe Reader.
Read the instructions that appear, and then click Save Now.
But the 'Enable User Rights in Adobe Reader' option is greyed out and not clickable. Is there a good solution for how to do this? Am I doing something wrong?

That would normally work, although the menu item is: Advanced > Extend Features in Adobe Reader
Reasons it may not work include you have security applied or the document is marked as a PDF/A document and you're viewing it in PDF/A mode. What does it say for security when you select: File > Properties > Security

Creating a test using the form wizard

I need to create a multipart test that will be used for editors applying for jobs. Part of the test will be a multiple choice spelling test, with 20 questions. I created the file in Word and am trying to use the form wizard to create check box fields. It looks like this:
1.
initative
intiative
initiative
enitiative
I want the blanks to the left of each word to be a check box field or a radio button.
When I created the pdf form and saved it, I found that when I checked any one of the boxes, all four check box fields were automatically filled in. I know I'm doing something wrong, but can't figure out what.
Do these forms have to be created in one session? Or can I save the form, close it and then contune editing the form fields later?
I am using Acrobat Pro 9.5
Any advice anyone can provide would be appreciated.
Thanks.
dg

I have gotten the hang of creating check boxes and radio buttons so that they behave the way I need them to behave. Thanks for the help on that.
I create these tests 2X per year and each test is to be used at least 500 times.
Here's my next apparent dilemma: I am creating this test in Acrobat Pro 9.5. The test takers are in three different cities in India. They use Reader X.
When I "distributed" a test of the only section I have completed to myself I discovered all of the distribution mechanisms (saving to a network folder, distributing via email, etc.). All of these options are far too complicated for my users.
Isn't there a way to create a form in Pro 9.5 that can just be saved with Reader X enabled so that anyone who opens the file in Reader X can just "save as" and have their filled-in data saved? I must emphasize that the saving process must be as simple as possible.
I need to keep this as simple as possible because I distribute these tests once and they are used over and over and the completed tests are collected by HR people who are not tech savvy at all. They are emailed to me from the three diffferent locations.
Previously I used Word but frankly there were two many ways people could cheat: That's why I want to switch to Acrobat forms. But this is looking like it's not going to work.
Perhaps I am missing something?
dg

Query to get users using a Form

Hi All
I would like to build a query to get all users who is having access to a form. I could get the cases
where there is no submenus. But how can I handles cases were submenus also there. Please help. I have checked
the other posts in this forum. But none is giving a possibility of giving single query for this.
Kindly help.
Version 12.1.3
Thanks,

I guess my question was confusing.
I build a query like this to getthe information, but it will work only if the function is attached directly to the main menu. It will not work incase of submentus.
SELECT distinct usr.user_name FROM
FND_FORM_VL form,
FND_FORM_FUNCTIONS_VL func,
FND_MENU_ENTRIES_VL menu_l,
FND_MENUS_VL menu_h,
FND_RESPONSIBILITY_VL resp,
FND_USER_RESP_GROUPS_DIRECT usr_resp,
FND_USER usr
WHERE func.form_id = form.form_id
AND menu_l.FUNCTION_ID = func.FUNCTION_ID
and menu_h.MENU_ID = menu_l.menu_id
and form.form_name = :FORM_NAME
and resp.MENU_ID = menu_h.menu_id
and usr_resp.responsibility_id = resp.responsibility_id
and usr.user_id = usr_resp.user_id ;

Is there a way to create an object using Trapcode Form and then use that object as a particle in Trapcode Particular?

I made some objects in Cinema 4D and I tried to import them into After Effects CC 2014. I get an error saying 'Cannot find Adobe Premiere Pro Dynamic Link'. So I tried it in AE CC and that worked. However, I want to create a form object and then use that as a particle for Trapcode Particular. Is this even possible?
Thank you for any help!

There are also size limitations or rather suggestions for particle size. If I were creating an animated 3D shape using Form or C4D and wanted to use it as a particle I would keep the size of the particle about 1/6 to 1/8 of the comp size. You would create a new comp for your particle, animate it, then nest the particle comp in your main comp, turn off visibility, and then use it as a particle in Particular.

Creating Portal Application using XML Forms in it

Hello All,
I have successfully created a XML Form & used that one using various iViews. Now i want to create a portal application (par file) using that XML Form in it. And then want to upload those par file into the portal,which will create iViews.
Please guide me with the jsp/java/bean codes required for it.
Regards,
Bidyut

Hi Bidyut,
i have the same requirement
explain me how u solved your requiremt, send me the pdf or document
thanks in advance
Thanks&Regards
charan
Edited by: charan12 on Feb 8, 2011 7:26 AM

Allowing end-user to create a user using a form

Similar Messages

Maybe you are looking for