CO-PA: value field correction due to miscalculated SD condition value

HI,
we are using ECC 60 SP11. Due to incorrect condition value calculation in SD this condition value (only used in CO-PA) is posted on a CO-PA value field causing wrong CO-PA results.
As the SD document (invoice) will not be changed anymore a reversal/reposting in CO-PA (ke4s) does not solve the problem.
My idea of value correction (only in CO-PA, I do not care about KEAT in that case...) is to use RKECADL1 to logical delete the old documents and to create a LSMW for ke21n to repost the documents again with the right value for the affected value field.
The question is, the document reference of the old (wrong) CO-PA document shows the billing document and its logical deleted by RKECADL1. My new document does not have a document reference to this billing document as the document source is ke21n.
Any idea how to "change" the document reference in a way that document flow for the billing document shows the ke21n-created document (with the right condition value)?? If I don not change it, document flow will not show any CO-PA document for that case (the old one is logical deleted, the ke21n-doc. is not linked to it)
I want avoid manual changes in Ce1**** as its a dirty solution and I am not completely sure if/which other tables are affected.
Best regards, Christian

The only way to effect the document flow is to cancel and repost the document. if that is not possible then KE21N - Create Line Items will fix your issue in COPA but this will not appear in billing. You can enter data fields that coonect to billing doc etc.
pts appreciated.

Similar Messages

Does Retry events handle the multi-value field correctly.

Hi ,
Just curious if the retry event task handle the multi-value event correctly. Let say we have five values a1, a2, a3, a4, a5 in a child table and while provisioning a2 and a4 get failed. Now when the retry task will run how will it be sure that it will pick up a2 and a4 value in the retry task. My understanding is we need to handle it in the code but just want to make sure if there is any configuration that will make it easy to achieve and we don't need to iterate the values in java code.
Thanks.

Hi Kevin,
Thanks for the reply. Does that mean that in case of retry the code will only execute for a2 and a4 (in the example in mentioned in my initial post) as i couldn't see maintain the key in the task retry schedule task or sch table. Am i missing anything.
In our case sometimes retry will send the value a1 (as example) while the failure is for a2. Do i need to put some additional config?

Field "Value field texts" is disabled to enter new values

Hi there,
I'm trying to enter new values on the field "Value field texts" from Depreciation Area, in Config Asset Value Display(Financial Accounting (New) > Asset Accounting > Information System > Configure Asset Value Display). The fields are disbled to enter new text values.
I don't know what's happening. I've see the SAP Note 121433, but I don't intend to request the creation of a program to fill these fields. Does anyone know if there's another way to deal with this?
Thanks in advance.

Hi Srinivasa,
Thanks for reply. I've checked the transaction ANSICHT following the steps said and the Master Data fields are with "No authorization" for all Depreciation areas.
Do you know if there's another way of enable these fields? We cannot change the Authorization settings from one Depreciation Area to another.
Thanks a lot.

Impact of Addition of New Value Fields in the existing Op. Concern-COPA

Hi All,
Want to know the steps of adding new value fields in the existing operating concern in COPA?
What is the overall impact of addition of New Value fields in the running Operating Concern?
How do we test the addition of new value fields?
Is the addition of New Value fields to the running Operating Concern advisable?
Your support and advice is highly anticipated and appreciated.
Thanks & Regards
9819528669
Ohter details are as follows...
VALUE FIELDS : Defines the Structure of your Costs & Revenues. (Op. Concern 120 Value Fields)
1)     The client requires three new value fields to be created. Value fields for :
-     Other Airport Charges - International
-     Cargo Commission Cost
-     Personal Cost (Direct)
2)     What are the Steps involved in creation of new value fields? The steps are :
1)     Before creating new value field we need to check whether we can use already existing UNUSED value fields (There are 62 value fields created for the op concern 1000, in production the value fields TBUL1-L7 i.e. to be used (I assume) screen shot1 provided. My predecessor has used value field VV291, VV292, VV380 original description being TBUL3, TBUL4, and TBUL1. I believe he has changed the description in development client and created a transport request ref screen shot 2)
2)     You can create new value field thru T-Code KEA6 (4-5 characters beginning with VV) u2013 My predecessor has reused the value fields originally created he has not created new one I believe. please provide give your comments)
3)     Specify whether this field is for Currency or Quantity (currency defined in attribute of op concern and quantity defined by its own field u2013 unit of measure) u2013 My predecessor has configured the three value fields as Currency.
4)     Describe how the values in this field are aggregated over characteristics. (SUM, LAS, AVG) u2013 My predecessor has aggregated all the three value fields as SUM and they are in Active status.
5)     After the value field is created you have to add the value field (active status only) to the operating concern by Editing the Data Structure. (I guess this is done in the next step)
6)     Assign newly created Value fields to the Operating Concern u2013 T-Code KEA0 (In development client the value fields are assigned to the op concern 1000 refer screen shot 3. In the production client also those three value fields exist (does it mean they are assigned? your comments please.) As they have the original description TBUL3, TBUL4, and TBUL1 refer screen shot 4.
7)     After the Data Structure is defined you need to activate them. (creates plan vs actual database) u2013 Go to the data structure tab and Choose Activate. The status in dev client is Active with correct description but in the production client it is Active with the OLD description. After addition of the value field you need to regenerate the operating concern. T-Code KEA0 u2013 right?
8)     Condition Types are assigned to Value Fields? Donu2019t know u2013 T-Code KE45 (I think this is NOT required in our case u2013 Please give your comments)
9)     Define and Assign Valuation Strategy u2013 Cost assigned to Value fields u2013 T-Code KE4U (I think this is also NOT required in our case)
10)     Define PA Transfer Structure for Settlement u2013 T-Code KEI1 (This step is crucial u2013 I think I have to to include newly created value fields, but am not aware how to do it and what is the connectivity or what happens after this is done)
Note: My predecessor has created a Transport Request No# KEDK902167 for the value fields created by him.
3)     Whether my predecessor has performed all the steps for value field creation? How to test it and check that?
4)     If yes then, Do I need to perform additional configuration or can I proceed to transport it to Production?
5)     What is COPA Allocation Structure & PA Transfer Structure? Where and Why It is used?
6)     What are the different methods of cost and revenue allocations in SAP?
7)     I have checked the status of the value fields across clients, It is as followsu2026
     Value Field     Value Field For     Description     Development      Quality     Production
1     VV291     Other Airport Charges International     TBUL3     Exists      DNE     DNE
2     VV292     Cargo Commission Cost     TBUL4     Exists      DNE     DNE
3     VV380     Personal Cost u2013 Direct     TBUL1     Exists      DNE     DNE
#DNE : Does Not Exist (assumed since the description given to value field is not the same as in development client.)

HI sree,
ofter creation value field and saving that time reqwest number appeare copy the reqwest number and go through the se01 select that reqwest number select and transport click the truck symbole, and draft a mail to basis guyw.
Thank You!
Best Regards,
pradheep.

Wrong updation of value fields

hello,
In a sales return invoice, the cost is getting updated in value field cost of free goods rather than value field cost .
Please guide me in this .
Thanks

Hi Muscan
What is the condition type in SD Pricing procedure for Cost during sale return? (Check your Sales Order - Pricing tab)
See assignment of that cond type to val field in KE4I
Regards
Ajay M

COPA -update new value field

Hi All,
We have 3 revenue value fields and created new value field to capture total revenues for all 3 revenue value fields.
only new sales orders total revenue value field is populated with revenues.how can we update old sales orders revenue value field information with total value field?
Revenue A + Revenue B + Revenue C= Total revenue
Thanks,
Anusha

Hi Anu
KE4S is one option
Another one is to do KE21n.. but that will be cumbersome.
You can develop a custom program using Bapi to upload the values automatically
Last option is to add those values in report manually or using key figure scheme ker1
Br. Ajay M

Add value field to existing/ productive operating concern

Dear All,
I need to create a new value field and add it to an existing operating concern, which is already in use (there is already transaction data in the live system).
In my opinion I have to do the following steps:
1. Create new value field (KEA6).
2. Add value field to operating concern (KEA0).
3. Activate operating concern (KEA0).
4. Transport operating concern (KE3I).
Is that strategy ok?
Is it ok, to transport an operating concern, when the system is already "live" and there is transaction data in the system?
Thanks for your answers,
Regards,
Michael

Hi,
first create new value field in KEA6. then take those new Value field in your operating concern Data Structure in t-code KEA0. Then generate the operating Concern.
Regards,
Sreekanth

Value Fields assignment. urgent!!!!!

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
hi gurus,
we use costing based COPA. i have created a new value field and assign it to a SD condition. but when billing, there is error, i check the system and found this value field has been actived but can not displayed in my operating concern. i want to transfer the value field to operating data structure with T-code KEA0. but failed. because it is actived in the column "Copy from". it is in our production system. very urgent. the following is the error message.
Operating concern 6000 does not contain value field VV150
Message no. KE891
Diagnosis
Value field VV150 is not found in operating concern 6000. This value field is nevertheless assigned to condition type ZD69.
System Response
The billing document cannot be posted to Profitability Analysis.
Procedure
Delete the assignment to condition type ZD69 for operating concern 6000. You do this in Customizing for Profitability Analysis underFlows of Actual Values -> Transfer of Billing Documents -> Assign Value Fields.
your valuable point will be assigned.
thanks in advance.
Ivan

You have to declare the l_lotno and l_batno as global variables.
here they are local variables and their scope is withing the block in which they are defined.
Declare them outside the blocks(Performs etc)
Regards,
Ravi

Impact of adding new value fields in ongoing operating concern.

Hi All,
Want to know the steps of adding new value fields in the existing operating concern in COPA?
What is the overall impact of addition of New Value fields in the running Operating Concern?
How do we test the addition of new value fields?
Is the addition of New Value fields to the running Operating Concern advisable?
Your support and advice is highly anticipated and appreciated.
Thanks & Regards
9819528669

HI,
please search in SCN forum before you post:
Re: Adding a ValueField to an existing Operating Concern?
Best regards, Christian

Add value field to operating concern

Hello,
I have created a new value field VV955 and want to add it to my operating concern in transaction KEA6.
I go into change mode for all value fields for my operating concern and add a new line with my value field. When I hit the save button, it says "Field VV955 exists as Val. fld in field catalog -> choose another name".
Also when I go into change mode in KEA0 where you can drag value fields from left to the right, the value field is blue which means I cannot assign it to my operating concern.
Any suggestions?
Thanks
Anne

Hi,
While creating value field it will only consider long text. Inoperating concern Data structure in KEA0 you can assgin value field it will display in blue first, when you select to data structure you can see value field and save the value field.
Regards,
Sreekanth

How to Change the Value Field Type of a Value Field

Hi,
How can I change the value field type from Currency to Quantity of a value field? I have tried to do it in KEA6. I can change the value field and its description, but not the value field type from currency to qty. If I change this config, is there any other changes that I need to make so there is no side issue of this change?

Hi Prem,
Once you created value field as quantity or currency, you can not change this nature of value field. Based on this, system creates lots of data and tables. For this reason system will not allow any changes in quantity or currency.
Alternative way is to remove the old value field and create a new value field assign to operating concern and put all your seetings.
Please let me know if you require any clarifications.
Thank you,
Regards,
Santosh
Reward points if helpful.

Costing component allocation to CO-PA value field via SD invoicing

Hi experts,
Somewhere a setting must be made that allocates costing component amount to CO-PA value fields.
I.e. this takes place when the CO-PA document is created belonging to the order/invoice created in SD.
Will appreciate to learn a transaction code where this setting is made.
BR,
Niclas

Hi,
costing-based CO-PA:
all values from billing documents flow to CO-PA based on KE4I T-code, quantities based on KE4M. If its necessary to reset some of the transferred values this can be done depending on the billing type using KE4W.
All other values that are posted with a PAOBJNR as cost object (=direct postings) are processed by mapping the cost element number to a value field in T-code KEI2.
Other values are settled to CO-PA by different settlement transactions (KEU5, KO88,...)
Best regards, Christian

KE30 - UOM Value Field required

Hi,
We have some FG Materials which are sold in PAC and EA. and PAC is Base Unit of Measure while EA is Alternative Unit of Measure.
In PA Report - KE30, system is accurately showing Sales Quantity but business wants to see UOM of Sales Quantity as well, means they want to see how much of same material is sold in EA and PAC. I have created customized Value Field (VVXXX) for UOM but my issue is how can i derive Base Unit of Measure and Alternative Unit of Measure to this Value Field as i need to see this in PA Report. I have checked T-Code : KEDR but i am not able to map value field there.
Kindly guide steps to solve this problem !!!
Thanks in Advance
Regards,
Sapna

I assume you have defined (at least) 3 quantity value fields in the operating concern. (The value fields shown below can be named as per your convention and may differ from these.)
VVIQT - Invoiced Quantity (in sales unit of measure) --> PAC or EA
VVPAC - PAC Quantity (base unit of measure = stock keeping unit)
VVEAQ - EA Quantity
The first two fields above are easily mapped in customizing transaction KE4MI via path:
SPRO > Controlling > Profitability Analysis > Flow of Actual Values > Transfer of Billing Documents > Assign Quantity Fields
Assign the following:
SD Qty Field     Name                       CO-PA Qty Field        Name
FKIMG              Billed Quantity          VVIQT                       Invoiced Quantity
FKLMG             Billing Qty in SKU     VVPAC                     PAC Quantity
To derive the third field try using customizing transaction KE4MS via path:
SPRO > Controlling > Profitability Analysis > Flow of Actual Values > Initial Steps > Store Quantities in CO-PA Standard Units of Measure
Assign the following:
Source Quantity      Description          Quantity     Description      Unit
VVPAC                    PAC Quantity      VVEAQ      EA Quantity     EA
The above option is to derive standard units of measure, such as KG. I'm not 100% certain it will work in your requirement to access the alternative units of measure conversion rates for a material (table MARM). If this configuration does not derive the EA quantity and units as expected, then the user exit mentioned previously can be used to fill the fields with the converted amount and unit.
Best regards,
Jeffrey Holdeman
SAP Labs, LLC

Subtotal value in sales order not coming into the net value field.

Dear Gurus,
I am entering two manual conditions in sales order and the total of the two conditions is taking into subtotal step. I want to show that subtotal value into Net Value field(i.e. avilable in the conditions tab).
I tried number of combinations.
Please help.

As taking two pricing conditions, system is deactivating one condition. That's why the net value is considering one pricing condition only.
to make both active, one pricing condition and the other condition as surcharge with positive value.

Pricing amount and condition value in sales order

Hi all,
I have noticed for a sales order we are not able to see condition type amount, condition value in sales order even though it shows net price finaly ofr a sales order. Not even able to select the condition lines.
To be specific not able to find value in field KBETR - amount column and KWERT - condition value column
When we go to sales order line item and select condition tab, do see value displayed in Amount and Condition column. Is there are specific reason it is doing visa vis in our production we see both values.
Advise what could be the reason value not getting displayed in Amount and Condition value column.
thanks

It is due to auth for specific columns we have solved the problem.

CO-PA: value field correction due to miscalculated SD condition value

Similar Messages

Maybe you are looking for