CO11N-in operation w/o material unable to find that material with 101 mvmt

Dear PP Gurus N Experts,
I have three operations in Routing, where all the material is consumed at First operation i.e. on second & third operation there is no MATERIAL CONSUMPTION.
So, I have assigned the material on operation one. Here my all operations have Control Key PP01
Now, my issue is: Material stock should update only at the confirmation of Third Operation. But when we go for confirmation of third operation (CO11N), we are unable to find that material with 101 movement at Goods Movement Screen.
We tried to enter the material manually also but we get a message: Goods receipt items can not be entered.
Why. Please help.
With thanks,
DSC

Dear Bhupendra,
What do you want to Say. Please read my original question: where I have mentioned-
I have three operations in Routing.
Where all the material is consumed at First operation i.e. on second & third operation there is no MATERIAL CONSUMPTION.
So, I have assigned the material on operation one. Here my all operations i.e. (0010, 0020 and 0030) have Control Key PP01.
For Control Key PP01, Auto Goods Movement Indicator is Checked in OP67.
Now, When I go for order confirmation for final (i.e. 0030) operation, here Order Material (say PMP1230) should appear with 101 Movement or as receiving material
Which is not happening. In other words I am not getting any material.
If I try to enter the material manually, get a message: Goods receipt items can not be entered.
With thanks,
DSC

Similar Messages

Unable to find ejb-jar with uri X.jar in ear at c:/Y/split_src

Stack trace is below, but the ejb does exist at the location that the FileNotFoundException states. I've checked that application.xml, org.eclipse.wst.common.component both have the correct name for this dependency.
java.lang.Exception: Exception received from deployment driver. See Error Log view for more detail.
at oracle.eclipse.tools.weblogic.server.internal.DeploymentProgressListener.watch(DeploymentProgressListener.java:190)
at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper.deploy(WlsJ2EEDeploymentHelper.java:506)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishWeblogicModules(WeblogicServerBehaviour.java:1466)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishToServer(WeblogicServerBehaviour.java:898)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publishOnce(WeblogicServerBehaviour.java:686)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.publish(WeblogicServerBehaviour.java:539)
at org.eclipse.wst.server.core.model.ServerBehaviourDelegate.publish(ServerBehaviourDelegate.java:774)
at org.eclipse.wst.server.core.internal.Server.publishImpl(Server.java:3153)
at org.eclipse.wst.server.core.internal.Server$PublishJob.run(Server.java:345)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:53)
Caused by: weblogic.application.ModuleException:
at weblogic.ejb.container.deployer.EJBModule.init(EJBModule.java:334)
at weblogic.application.internal.flow.ModuleListenerInvoker.init(ModuleListenerInvoker.java:167)
at weblogic.application.internal.flow.InitModulesFlow.initModule(InitModulesFlow.java:312)
at weblogic.application.internal.flow.InitModulesFlow.initModules(InitModulesFlow.java:325)
at weblogic.application.internal.flow.InitModulesFlow.prepare(InitModulesFlow.java:378)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: java.io.FileNotFoundException: Unable to find ejb-jar with uri ***.jar in ear at C:\***\split_src
at weblogic.ejb.spi.EJBJar.<init>(EJBJar.java:81)
at weblogic.ejb.container.deployer.EJBModule.buildClassFinder(EJBModule.java:201)
at weblogic.ejb.container.deployer.EJBModule.init(EJBModule.java:313)

Hi Ten,
FYI, just by placing the ejb jar inside EAR project it will not be picked up for deployment. The EJB module has to be defined on EAR Module Assembly, and the steps are:
> EAR Project | Properties, Deployment Assembly - Add EJB module
NOTE: To verify the dependency you could try to export the EAR project to an .ear file. If the exported .ear file bundles ejb jar then deployment should work fine.
As far as the deployment mode, OEPE supports WebLogic Split-source (default) and Exploded archive. In the default split-source mode, the .beabuild.txt contains the mapping to the actual files whereas in exploded archive the files are copied over to deployment staging location.
Steps to modify deployment mode:
> In the server view, right click on server configuration | Properties, select WebLogic | Publishing
Please make sure the ejb module is defined appropriately and let me know if this resolves the issue.
Thanks,
Ram

Unable to publish - Unable to find ejb-jar with uri itr-ejbs.jar in ear

I'm using Weblogic 10.3.4 with Eclipse Juno before i was with Eclipse Galileo. Since the update i'm not able to publish my ear anymore.
I search on the internet the explanation of this stacktrace but i don't find a understandable answer so i ask to you :D
<5 oct. 2012 12 h 30 CEST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1349433008242' for task '0'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:
     at weblogic.ejb.container.deployer.EJBModule.init(EJBModule.java:334)
     at weblogic.application.internal.flow.ModuleListenerInvoker.init(ModuleListenerInvoker.java:167)
     at weblogic.application.internal.flow.InitModulesFlow.initModule(InitModulesFlow.java:285)
     at weblogic.application.internal.flow.InitModulesFlow.initModules(InitModulesFlow.java:298)
     at weblogic.application.internal.flow.InitModulesFlow.prepare(InitModulesFlow.java:330)
     Truncated. see log file for complete stacktrace
Caused By: java.io.FileNotFoundException: Unable to find ejb-jar with uri itr-ejbs.jar in ear at D:\dev\workspaces\.metadata\.plugins\org.eclipse.core.resources\.projects\itr-ear\beadep\citron_domain\itr-ear\split_src
     at weblogic.ejb.spi.EJBJar.<init>(EJBJar.java:81)
     at weblogic.ejb.container.deployer.EJBModule.buildClassFinder(EJBModule.java:201)
     at weblogic.ejb.container.deployer.EJBModule.init(EJBModule.java:313)
     at weblogic.application.internal.flow.ModuleListenerInvoker.init(ModuleListenerInvoker.java:167)
     at weblogic.application.internal.flow.InitModulesFlow.initModule(InitModulesFlow.java:285)
     Truncated. see log file for complete stacktrace
>
<5 oct. 2012 12 h 30 CEST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'itr-ear'.>
<5 oct. 2012 12 h 30 CEST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException:
     at weblogic.ejb.container.deployer.EJBModule.init(EJBModule.java:334)
     at weblogic.application.internal.flow.ModuleListenerInvoker.init(ModuleListenerInvoker.java:167)
     at weblogic.application.internal.flow.InitModulesFlow.initModule(InitModulesFlow.java:285)
     at weblogic.application.internal.flow.InitModulesFlow.initModules(InitModulesFlow.java:298)
     at weblogic.application.internal.flow.InitModulesFlow.prepare(InitModulesFlow.java:330)
     Truncated. see log file for complete stacktrace
Caused By: java.io.FileNotFoundException: Unable to find ejb-jar with uri itr-ejbs.jar in ear at D:\dev\workspaces\.metadata\.plugins\org.eclipse.core.resources\.projects\itr-ear\beadep\citron_domain\itr-ear\split_src
     at weblogic.ejb.spi.EJBJar.<init>(EJBJar.java:81)
     at weblogic.ejb.container.deployer.EJBModule.buildClassFinder(EJBModule.java:201)
     at weblogic.ejb.container.deployer.EJBModule.init(EJBModule.java:313)
     at weblogic.application.internal.flow.ModuleListenerInvoker.init(ModuleListenerInvoker.java:167)
     at weblogic.application.internal.flow.InitModulesFlow.initModule(InitModulesFlow.java:285)
     Truncated. see log file for complete stacktrace
>Thank You

Hi,
It seems one of your ejb jar is missing from the current file location.
D:\dev\workspaces\.metadata\.plugins\org.eclipse.core.resources\.projects\itr-ear\beadep\citron_domain\itr-ear\split_src
you can make it manually copied to this location and build the project again so that it can able to deploy propertly.
Now one more thing you can do open a ticket with oracle support for better assistance.
Regards,
Kal

Unable to find module dependency with signature microsoft_VC100_CRT_x86.DF495...

I am fairly new to Measurement studio and am having an issue.I am running visual studio 2010 SP1 and measurement studio 2013. my project runs fine in the developement environment. But when I try to make an installer package I am getting these errors when I try to build the setup project.
unable to find module dependency with signature microsoft_VC100_CRT_x86.DF495...
Two or more objects have the same target location('[policydir]\9.0.30729.1.cat')
two or more objects have the same target location ('[payload_ul]9.030729.1.policy')
when looking at all of the detected dependencies module dependencies I found that mstudiocommon2010.msm and mstudioui.msm
had microsoft_VC100_CRT_x86.AFA... as a dependancy but the current merge module had the DF495 signature.
After reading some of the posts I saw that if you were running Visual studio SP1 you may need to goto the pre SP1 files.
I did this and the warnings for msstudiocommon2010.msm and mstudioui.msm went away.
now I have the problem MStudiodaqmx.2010.msm has a dependency on microsoft_vc100_crt_x86.DF495
but that got replaced when i went back to the older versions. I am at aloss as to what to do at this point.
As for the policy and payload error I was hoping these would disappear when the other issue is cleared up but I may be wrong.
Any help would be greatly appreciated

Hi vmrak,
Just to clarify, have you been following the steps in the Deploying Measurement Studio Applications KB article and using the files posted in the Problems building InstallShield installer after upgrading to MS 2010 forum post? Also, where are you seeing that MStudiodaqmx.2010.msm is dependent on microsoft_vc100_crt_x86.DF495? If you're receiving an error that says this, would you mind posting a screenshot of it?
You could try keeping both the old and the new versions of the merge modules in the same directory on your computer to see if all the correct references are made this way.
-Myriam

SINCE UPDATING TO YOSEMITE NOW UNABLE TO FIND OLD EMAILS WITH NAME RECOGNITION

Apple Desktop
Since changing over to Yosemite i am now unable to find groups of old emails, if i type in say travelzoo i used to be able to find all the old emails, but since 31st January when we changed to Yosemite now it shows no old emails in a block form Can you help please

When you type travelzoo into the search field, does it make any token suggestions such as People or Name, or does it provide no search tokens?
If you don't get any, try reindexing Spotlight: Spotlight: How to re-index folders or volumes - Apple Support

Unable to find any record with GUID/Deleting old users from the Proxy DB

It seems that I have old users in my proxy db that need removing as per the below post.
http://discussions.apple.com/thread.jspa?messageID=8062329&#8062329
The problem, I have is that after I have ran the python script as per this link:
http://trac.calendarserver.org/wiki/ProxyCleanup
I get the following response:
+diary:~ root# sudo python /Users/admin/Desktop/proxyclean+
+CalendarServer proxy DB clean-up tool+
=====================================
+Parsed: /etc/caldavd/caldavd.plist+
+Found DS Node: /Search+
+Found proxy DB path: /Library/CalendarServer/Calendar Files/principals/.db.calendaruserproxy+
+Loading /Users records from OD: /Search+
+Found 104 /Users records+
+Reading proxy DB: /Library/CalendarServer/Calendar Files/principals/.db.calendaruserproxy+
+Found 1 proxy DB records+
+Failed: need more than 1 value to unpack+
Could this have something to do with the fact that I have my iCal Server bound to my ODM?

Additionally, can you confirm that all server components are running the latest updates, as are the clients / phones involved in the conference?
I've seen this exact behavior when the invite / adding of additional participants was being performed ad-hoc on a CX3000. It transpired that a firmware upgrade on that device rectified the problem.
Kind regards
Ben
Blog:www.gecko-studio.co.uk/
Twitter:
LinkedIn:
Facebook:
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems
or queries.

I have an Imac using the old Classic operating system. The printer I was using died and I need a new printer that will work on the OS 9.1/9.2 operating system. Does the install disk that comes with the printer allow the computer to communicate with the

My printer died and I need a printer that is compatable with OS 9.1/9.2. Some printers say they are compatible with OS 9.1/9.2 but do they need a driver or is it included with the install disk that comes with the printer?

As long as the printer is accurately described as being compatible with OS 9.1/9.2, if it needs to have software (such as drivers) installed that software should either be included (usual) or downloadable from the net(usually from the manufacyrer's website).
Not all non-Apple printers need drivers installed. Some, such as many Postscript ones that connect via ethernet, are quite comfortable using the LaserWriter 8 printware that's part of OS 9. Some of those, though, may need to have a model-specific PPD (Postscript Printer Description) installed, a small document that informs the printware of the capabilities of the printer.

Unable to find the transported query in quality

hi experts,
i have modified one query in development according to client requirement and it has transported to quality, but i am unable to find that query in quality, but basis consultant successfully transported.
what is the problem,
pl help me,
thanks in advance,
venkat.

Hi,
Input the name of the query in Query Designer wrt the quality system and try to display the same.
BR/
Mathew.

Unable to find the xml message in the queue even though xml is invoked

Hi,
Currently,we are invoking a queue in a BPEL Process where we are trying to place an xml into it.When verified in Console can see the queue is invoked and also a new record is being created in the queue but unable to find that xml in it.Could you please tell me how and where can we find the xml in the queue.
Regards,
N.Das
Edited by: DasN on 05-Mar-2013 22:52

Check these...
https://forums.oracle.com/forums/ann.jspa?annID=893
http://docs.oracle.com/cd/E13222_01/wls/docs100/ConsoleHelp/taskhelp/jms_modules/queues/ManageQueues.html
Cheers,
Vlad

Unable to find "OAM IdentityAsserter" in weblogic

Hi alll,
I'm trying to setup SSO for the development purpose (Test Environment). I installed all the application as specified in the oracle document.
While configuring the weblogic, under the Security Realms -> my realm -> Providers -> Authentication -> its asked to create "New Authentication Provider"
Then i'm giving the as mentioned "OAM ID ASSERTER" then i need to select Type as "OAM IdentityAsserter", but I'm unable to find that option.
Please guide me how to get that. is there any plugin required or am I missing something here..
Please help..
Thanks
Lakshmi

hi,
i installed OAM,OHS,Webgate,weblogic in one machine and installed only weblogic in second machine. Deployed a webapplication in second machine weblogic server and i am trying to protect the webapplication using OAM. I am trying to install Access Gate in second machine but i did not find any Access Gate installer for OAM 11g.where can i download configure Acessgate.exe . is Access Gate Required for weblogic server.
Thanks,

IAssets Unable to find person ID:

Hi Team,
An Asset is created in FA module. The asset is visible in iAssets module. When iAssets module is opened the error "Unable to find person ID:" is visible at the top. Further when we search the asset in the Asset Search Tab & add the asset or save for later we get the error "Unable to find an object with the name EmployeeVO".
Can some one help me with this issue.
Thanks.

Probably your user name may not be linked with an employee record ... Can you check that ...?
Regards,
Ivruksha

'Unable to find operation: null' Error When I invoke Composite Wsdl Url

Hi ,
I have created one composite application which consists one BPEL process.That BPEL process takes input from other application.
But When I invoke that Wsdl Url to push the data from my application to that Wsdl Url,It is giving below error(System fault):
'Unable to find operation: null' .
I am getting below message in enterprise manager console (http://ipaddress:port/em):
'Composite instances are not generated for rejected messages. Click the error message for details'.
Note: When u click on 'unable to find operation: null' link it is showing the soap request that we submitted to composite URL.
Instance ID is also not created.
Can anybody help me regarding this issue?

As you are able to test the Composite in the EM console and the correct operation, everything looks fine from SOA side.
Now whatever application from which you are trying to push the data, make sure while configuring the WSDL of the Composite, please check whether you can select the operation of the SOA Composite over there. I think you are leaving the default option which is null or not selecting the required operation over there.
Hope this helps
N

OSB to BPEL communication - Unable to find operation: null

I am trying to call sca composite deployed in Oracle EM 11g from OSB proxy service 11g.
But I am seeing "Unable to find operation: null" in the oracle SCA composite EM dashboard.
What could be the problem?

As you are able to test the Composite in the EM console and the correct operation, everything looks fine from SOA side.
Now whatever application from which you are trying to push the data, make sure while configuring the WSDL of the Composite, please check whether you can select the operation of the SOA Composite over there. I think you are leaving the default option which is null or not selecting the required operation over there.
Hope this helps
N

Apple mail problem message reads - Account removal failed with error: "The operation couldn't be completed. Unable to find an account for the UID given.".

Account removal failed with error: “The operation couldn’t be completed. Unable to find an account for the UID given.”. - trying to remove account but get this message please help

Try to remove the account in the Internet Accounts preference pane.

Unable to explode BOM material

Hello PS Gurus,
I am unable to explode BOM material ( M) in CN22 for one network activity (A). The same material M can be exploded in same network but different activity (B)
Please throw some light in this
MM

Hello All,
Thanks for ur help.
I found out that date of the validity in CN22 made the issue.
Many thanks again.
Enjoy ur evening.
Thanks
MM

CO11N-in operation w/o material unable to find that material with 101 mvmt

Similar Messages

Maybe you are looking for