COBRAS message import failure to Unity Conection 7

Hi,
I am attempting to import messages from unity 4.0(5) to Unity connection 7. Unfortunately I fails every time with the following message "SocketError: WSAECONNREFUSED No connection could be made because the target machine actively refused it".
I have followed the configuration steps described in the documentation and tutorials. The import works well for greetings etc. but not for messages.
I have attached a word doc with the secreen shots from my setup. Any suggestions?
Regards,
Richard.

There's a couple troubleshooting sections in the help file that run down the ports used and has some tips here - just one clarification since a lot of folks stumble on this.
Greetings and voice names gets moved on/off the Connection server using HTTP - messages are imported using strictly SMTP.  They have nothing at all in common and one working has no bearing on the other working.  Notably the certificate that trips folks up comes into play only for greetings and voice names (HTTP) - it has no bearing on SMTP traffic.
The two most common problems I see escalated are the security for SMTP is not disabled properly.  I've seen that dozens of times - double check that the SMTP server setup on Connection allows for connections from untrusted IP Addresses, the "Require Authentication from Untrusted IP addresses" is UNchecked AND the Transport layer security from Untrusted IP Addresses is set to "Disabled" - if any of those are not configured that way you'll get active refusals of connections.
The 2nd most common issue here is a security application like Norton in play - they will block outbound SMTP traffice off the Windows box you're on by default - frustratingly many of them allow the first connection attempt up front sometimes and it will fail _later_ when messages are being sent in.  Very annoying... this thwarts the up front check to see if the path is open before the import begins.
Either way something is either blocking the SMTP traffic or the server is not accepting inbound SMTP traffic - one or the other.

Similar Messages

  • Subscriber Message Import Cobras

    Im having an issue with a few accounts.  I have about 800-900 accounts to import.  Everything is going fine, but a few are failing on message imports.  Im not sure if its because im doing too many at once or what.   I can select 3 for testing and they import their voicemails fine.  But then it will pop a message with 5 retries, check antivirus, or smtp configs on the CUC server.   I know SMTP is working because I can telnet to port 25 from the COBRAS workstation to CUC and get the telnet responses.  I can import a few accounts messages, no issues.   Is there some sort of bug with this on the number of ussers at once?  Or should I be doing these in batches of uses for messages?
    Thanks!

    Thanks Jeff for the response.  Here is a snipit from the log:
    Messages
                      (error) failure returned from IMAP library=ChilkatLog:   SendEmail:     DllDate: Sep  8 2009     UnlockPrefix: CISCOMAILQ     Username: unitymsgstoresvc     Component: ActiveX     Recipients:       NumTo: 1       To: [email protected]       NumCC: 0       NumBCC: 0     Need new SMTP connection     No SMTP login provided.     No SMTP password provided.     Skipping SMTP authentication because no login/password provided.     SMTP_Connect:       Connecting to SMTP server 192.168.35.32:25       smtp_host: 192.168.35.32       smtp_port: 25       smtp_user: NULL       auth-method: NONE       InitialResponse: 220 IMCUNITYCON1 UnityMailer (ver 1.0); Mon Jan 03 14:34:45 PST 2011       sendingHello: EHLO IMCUNITY0.company123.com       helloResponse: 250-IMCUNITYCON1:8025 Hello 192.168.35.22 [192.168.35.22] 250-SIZE 10000000 250-PIPELINING 250-AUTH LOGIN 250 HELP       smtpAuthMethod: NONE       login_method: NONE or already authenticated       CONNECTED to ESMTP server 192.168.35.32:25       ConnectionType: Unencrypted TCP/IP     subject: Message from an unidentified caller (6263800194)     reversePath: unityconnection     recipients:       to: [email protected]     email_size: 30729     socket is not ready for writing     idleTimeoutMs: 30000     Socket send idle timeout     Failed when sending end-of-body     CommandSent: 0     GotResponseCode: -1     TimedOut: 0     Aborted: 0     NumSuccess: 0     NumTotal: 1     Send failed.   354
                      (error) failure sending email message via SMTP for message with subject=Message from an unidentified caller (4029820710) in SendMessageToServer_Unity.
                      (error) failure returned from IMAP library=ChilkatLog:   SendEmail:     DllDate: Sep  8 2009     UnlockPrefix: CISCOMAILQ     Username: unitymsgstoresvc     Component: ActiveX     Recipients:       NumTo: 1       To: [email protected]       NumCC: 0       NumBCC: 0     Need new SMTP connection     No SMTP login provided.     No SMTP password provided.     Skipping SMTP authentication because no login/password provided.     SMTP_Connect:       Connecting to SMTP server 192.168.35.32:25       smtp_host: 192.168.35.32       smtp_port: 25       smtp_user: NULL       auth-method: NONE       InitialResponse: 220 IMCUNITYCON1 UnityMailer (ver 1.0); Mon Jan 03 14:33:44 PST 2011       sendingHello: EHLO IMCUNITY0.company123.com       helloResponse: 250-IMCUNITYCON1:8025 Hello 192.168.35.22 [192.168.35.22] 250-SIZE 10000000 250-PIPELINING 250-AUTH LOGIN 250 HELP       smtpAuthMethod: NONE       login_method: NONE or already authenticated       CONNECTED to ESMTP server 192.168.35.32:25       ConnectionType: Unencrypted TCP/IP     subject: Message from an unidentified caller (4029820710)     reversePath: unityconnection     recipients:       to: [email protected]     email_size: 49579     socket is not ready for writing     idleTimeoutMs: 30000     Socket send idle timeout     Failed when sending email body     220 IMCUNITYCON1 UnityMailer (ver 1.0); Mon Jan 03 14:33:44 PST 2011 250-IMCUNITYCON1:8025 Hello 192.168.35.22 [192.168.35.22] 250-SIZE 10000000 250-PIPELINING 250-AUTH LOGIN 250 HELP MAIL FROM: 250 2.1.0 . Sender ok RCPT TO: 250 2.1.5 . Recipient ok DATA 354 Enter mail, end with . Content-Transfer-Encoding: base64 X-CiscoUnity-Status: NEW Importance: Normal Sensitivity: None X-CiscoUnity-CallerANI: 4029820710 X-CiscoUnity-MessageType: Voice Date: 10 Sep 2009 00:08:20.0000 UT Content-Type: audio/x-wav;name="VoiceMessage.wav" Subject: Message from an unidentified caller (4029820710) To: "Nadene Martin"  From: unityconnection Message-ID: <[email protected]> UklGRtqLAABXQVZFZm10IBIAAAAHAAEAQB8AAEAfAAABAAgAAABmYWN0BAAAAKiLAABkYXRh qIsAAP////////9+//////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////9+//////////////////////////////////////// ////////////////////////////////////fv////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// ////////////fv////////////////////////////////////////////////////////// ////////////////////////fv////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// ////////////////////////////fv////////////////////////////////////////// /////////// ...     NumSuccess: 0     NumTotal: 1     Send failed.   0
                      (error) failure sending email message via SMTP for message with subject=Message from an unidentified caller (6262738288) in SendMessageToServer_Unity.
                      (error) failure sending email message via SMTP for message with subject=Message from an unidentified caller (6263800194) in SendMessageToServer_Unity.
                      (error) failure returned from IMAP library=ChilkatLog:   SendEmail:     DllDate: Sep  8 2009     UnlockPrefix: CISCOMAILQ     Username: unitymsgstoresvc     Component: ActiveX     Recipients:       NumTo: 1       To: [email protected]       NumCC: 0       NumBCC: 0     Need new SMTP connection     No SMTP login provided.     No SMTP password provided.     Skipping SMTP authentication because no login/password provided.     SMTP_Connect:       Connecting to SMTP server 192.168.35.32:25       smtp_host: 192.168.35.32       smtp_port: 25       smtp_user: NULL       auth-method: NONE       InitialResponse: 220 IMCUNITYCON1 UnityMailer (ver 1.0); Mon Jan 03 14:34:15 PST 2011       sendingHello: EHLO IMCUNITY0.company123.com       helloResponse: 250-IMCUNITYCON1:8025 Hello 192.168.35.22 [192.168.35.22] 250-SIZE 10000000 250-PIPELINING 250-AUTH LOGIN 250 HELP       smtpAuthMethod: NONE       login_method: NONE or already authenticated       CONNECTED to ESMTP server 192.168.35.32:25       ConnectionType: Unencrypted TCP/IP     subject: Message from an unidentified caller (6262738288)     reversePath: unityconnection     recipients:       to: [email protected]     email_size: 44601     socket is not ready for writing     idleTimeoutMs: 30000     Socket send idle timeout     Failed when sending email body     220 IMCUNITYCON1 UnityMailer (ver 1.0); Mon Jan 03 14:34:15 PST 2011 250-IMCUNITYCON1:8025 Hello 192.168.35.22 [192.168.35.22] 250-SIZE 10000000 250-PIPELINING 250-AUTH LOGIN 250 HELP MAIL FROM: 250 2.1.0 . Sender ok RCPT TO: 250 2.1.5 . Recipient ok DATA 354 Enter mail, end with . Content-Transfer-Encoding: base64 X-CiscoUnity-Status: NEW Importance: Normal Sensitivity: None X-CiscoUnity-CallerANI: 6262738288 X-CiscoUnity-MessageType: Voice Date: 08 Sep 2009 23:31:08.0000 UT Content-Type: audio/x-wav;name="VoiceMessage.wav" Subject: Message from an unidentified caller (6262738288) To: "Nadene Martin"  From: unityconnection Message-ID: <[email protected]> UklGRqp9AABXQVZFZm10IBIAAAAHAAEAQB8AAEAfAAABAAgAAABmYWN0BAAAAHh9AABkYXRh eH0AAP////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////// //////9+fn7//////////////////////////////////35+//////////////////////// ////////fv////////////////////////////////////////////////////////////// //////////////////7///////////////9+fn5+fn5+fv///35+/n5+/v7+/v////////// //////////////////////////////////////////////////////////9+fn7///////// //////////////////////////9+fv//fn7/////////////////////////////fn5+fn5+ /////////// ...     NumSuccess: 0     NumTotal: 1     Send failed.   0
    Rachel Lewman
                      (warning) WAVFileUpload command to copy stream file to server timed out in RestoreWAVFileStream.  Retries exceeded, skipping file upload.  StreamId=6d69b3d1-a81e-421b-a1f5-86eb6279bdba.wav

  • Solution Import Failure Message: Cannot add a Root Component 'GUID' of type 29 because it is not in the target system

    Hi all,
    Please refer to the error:
    Root Components import: FAILURE
    [2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread:   43 |Category: Exception |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Error |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | CrmException..ctor
     ilOffset = 0x30
    at CrmException..ctor(String formattedErrorMessage, Int32 errorCode, Object[] arguments)  ilOffset = 0x30
    at ImportRootComponentsHandler.GetSolutionRootsCollection(Boolean throwIfMissing, Boolean skipRibbonCustomization)  ilOffset = 0x209
    at ImportRootComponentsHandler.ImportItem()  ilOffset = 0x8
    at ImportHandler.Import()  ilOffset = 0x43
    at RootImportHandler.ImportAndUpdateProgress(ImportHandler ih)  ilOffset = 0x7
    at RootImportHandler.HandleNonMetadataHandlers(String[] ImportEntities, ImportHandler& ihForCurrentPath)  ilOffset = 0x33
    at RootImportHandler.RunImport(String[] ImportEntities)  ilOffset = 0x1D8
    at ImportXml.RunImport(String[] ImportEntities)  ilOffset = 0xE
    at ImportXml.RunImport()  ilOffset = 0x5BF
    at ImportXmlService.ImportSolutionSkipCapable(Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Byte[] customizationFile, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies,
    ExecutionContext context)  ilOffset = 0x46
    at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)  ilOffset = 0xFFFFFFFF
    at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)  ilOffset = 0x25
    at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)  ilOffset = 0xCF
    at LogicalMethodInfo.Invoke(Object target, Object[] values)  ilOffset = 0x4F
    at InternalOperationPlugin.Execute(IServiceProvider serviceProvider)  ilOffset = 0x57
    at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context)  ilOffset = 0x200
    at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context)  ilOffset = 0x65
    at Pipeline.Execute(PipelineExecutionContext context)  ilOffset = 0x65
    at MessageProcessor.Execute(PipelineExecutionContext context)  ilOffset = 0x1C5
    at InternalMessageDispatcher.Execute(PipelineExecutionContext context)  ilOffset = 0xE4
    at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode,
    Int32 secondaryObjectTypeCode, ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion)
     ilOffset = 0x16E
    at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId,
    OrganizationContext context, Boolean returnResponse, Boolean checkAdminMode)  ilOffset = 0x1F1
    at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode)  ilOffset
    = 0x2D
    at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode)  ilOffset = 0x26
    at InprocessServiceProxy.ExecuteCore(OrganizationRequest request)  ilOffset = 0x34
    at PlatformCommand.XrmExecuteInternal()  ilOffset = 0xF6
    at ImportSolutionCommand.Execute()  ilOffset = 0x20
    at DataSource.ImportSolution(Byte[] customizationFile, Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies, IOrganizationContext
    context)  ilOffset = 0x0
    at SolutionImportProcessPage.ImportSolution()  ilOffset = 0x123
    at SolutionImportProcessPage.ProcessRequestData()  ilOffset = 0x4A
    at SolutionImportProcessPage.ProcessAction(String action)  ilOffset = 0x92
    at AppUIPage.OnPreRender(EventArgs e)  ilOffset = 0xD
    at Control.PreRenderRecursiveInternal()  ilOffset = 0x54
    at Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)  ilOffset = 0x6D3
    at Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)  ilOffset = 0x3C
    at Page.ProcessRequest()  ilOffset = 0x14
    at Page.ProcessRequest(HttpContext context)  ilOffset = 0x33
    at CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()  ilOffset = 0x18D
    at HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)  ilOffset = 0x15
    at ApplicationStepManager.ResumeSteps(Exception error)  ilOffset = 0x10A
    at HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)  ilOffset = 0x5C
    at HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)  ilOffset = 0x16A
    at ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)  ilOffset = 0x4B
    >Crm Exception: Message: Cannot add a Root Component 0ffbcde4-61c1-4355-aa89-aa1d7b2b8792 of type 29 because it is not in the target system., ErrorCode: -2147188705
    [2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread:   43 |Category: Platform.Sql |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Info |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | BusinessProcessObject.ExecuteNonQuery
     ilOffset = 0x28
    I am getting this coming up in the error log when I attempt to import an unmanaged solution.
    After searching on google Type 29 refers to a workflow.
    I go into the source system and query the database by the GUID and discover that it is actually a Business Process Flow called 'Phone to Case Process'. 
    I do not have this process in my target system as I deleted it.
    Looks like this is one of the out of the box ones. I don't think we we have changed this one much.
    What does this mean and what should I be looking for??
    Anyway how do I remove this offending process from the unmanaged solution xml file and attempt to re-import it? 
    It doesn't look like I can generate the solution again without the offending workflow/process..

    I managed to resolve this issue after looking at this thread:
    https://social.microsoft.com/Forums/en-US/fddff17f-1cca-4d33-a666-60c08ad76b0c/crm-2011-import-failure?forum=crmdevelopment
    Just modify both solution and customizations xml by searching for the guid and removing the root component

  • File Import Failure message

    I've just started the switch from FCP to Premiere on my Macbook Pro and am stuck early on with two issues.
    File Import Failure message.
    Importing some clips shot with a Canon 5D Mark II [ 24 fps (23.9+)] and PP  seems to import them but also gives me a "File Import Failure" and "File format not supported" messages. I've tried to input a folder from the flashdisk itself and from a copy on a disk drive. The error message shows up and then all the files also show up in clips in PP.
    But something is wrong because when I play the files back in the Source window they play speeded up even though PP shows the correct file length.
    I've tried making a sequence set to 24 fps (23.9+) and same thing happens. The sequence and the files both have the same frame rate. When I drag a clip into the sequence e it's still speeded up.
    Sure would like to get started . . . this is probably a simple thing.
    I'm using the 30-day trial of CC PPro 7.
    Can anyone help?
    Many thanks,
    Robert
    It's an MBP with 2.6 ghz i7, 8 g ram, OS 10.8

    How exactly are you importing the clips? Through Media Browser? File>Import...? Drag and drop from Finder? And perhaps more to the point, exactly which files or folders are you selecting for import. With folder-based content, your best bet is to use Media Browser, which knows how to make sense of the multiple files that comprise each clip. If, instead, you simply drag a whole folder into the Project panel, Premiere will import the media files but throw the File Import Failure message for other files like XML. (If you stretch the dialog horizontally, you'll be able to see the full filename and extension of the ones that PPRO is balking at. Yes, I know, the mouse pointer doesn't give you the expected feedback that it will work to stretch the dialog, but trust me.)
    As to the clips playing faster than real-time, what frame rate is reported in both the Project panel and the Metadata panel. In the latter panel, please check both the Clip section at the top and the File section under Dynamic Media (typing "frame" in the search field will show you both).
    Also, what do you see in the Frame Section of the Interpret Footage dialog (Clip>Modify>Interpret Footage.)
    What's the stated duration, and how long does the clip actually take to play from start to finish?

  • Premiere Elements 9 PC: Major Importer Failure

    I think that I have gone down every troubleshooting road on trying to discover why "all of a sudden" Premiere Elements 9 PC will not import anything via Get Media/Files and Folders into its Organize interface as is its default behavior. The program fails at that point and shows the message "the program is not responding". Yet if you force the closure of that particular project and reopen a new one, you find that those media that failed to import into Organize in the first project now are live and well in the Organize of the new project. You can drag them from the Organize to the Timeline and use them in this new project. All other functions of Premiere Elements 9 PC appear unaffected by this import failure. AND, source media can be video (any format and size) and photos (any size). This happens even with import of the first and only file being a jpg (800 x 600 pixels).
    My history of Premiere Elements 9 PC/baddrivers.txt file/ and "incompatible driver messages" is well documented in these forums. That involved Windows XP Professional SP3 32 bit and a NVIDIA display card. And, I have been moving along successfully with Premiere Elements 9 PC for several months. About two weeks ago, I upgraded my computer to Windows 7 Professional 64 bit Intel Graphics Card, and Premiere Elements has been performing great until yesterday when what I call "major importer failure" struck. The computer has about 800 GB free hard drive space and about 2.5 GB out of 4.0 GB of available RAM. All of this worked great for about two weeks and now suddenly this yesterday. Did I do anything different or unusual? I think not. I also have Premiere Elements 7 and 8 on this same new computer, and they continue to function perfectly in all respects, whereas Premiere Elements 9 does not. AND, yes I have had the Premiere Elements 9.0.1 Update installed and in use before and after the importer failure.
    Troubleshooting has included
    a. Uninstall/Reinstall from Premiere Elements 9 installation disc + uninstall/reinstall of QuickTime + Photoshop Elements 9 as well.
    b. System Restore (as well as a restore of an earlier version of the installed Premiere Elements 9.
    c. Removal of possible interferring program, such as, Nero InCD.
    d. Removal of recent Windows Updates
    e. Uninstall/reinstall of Intel driver since at one point in the failure the Edit Mode Monitor was displaying part of the Disc Menu Section while the program was in the Organize Mode.
    f. Have looked at permissions, running as Administrator, etc.
    One of the things that I will try this morning is installing Premiere Elements 9 PC on the previous system Windows XP Professional SP3 32 bit to see if there is any major importer failure there at this time.
    If anyone has the time, I would appreciate any comments on a troubleshooting avenue that I may have overlooked. This appears to be another Deja Vu all over again. I hope not.
    Thanks.
    ATR

    Neale
    Thank you for your interest in this issue.
    I still have not pin pointed why my Premiere Elements 9 works great EXCEPT it will not import media into the Organize with Get Media/Files and Folders and attempts to do that drive the program into unresponsiveness and extreme difficult closure, even with the Task Manager.
    Yes, I have already looked at the workaround that you suggested for moving forward in my Premiere Elements 9 PC project, that is, entering all my source media into the Elements Organizer (can do from Photoshop Elements side) so that the source media thumbnail will be in the Premiere Elements Organize "ahead of time", and I will not have to depend upon Get Media/Files and Folders to get that job done.
    But, until I hit the key to this, I think I have an almost perfect better way. My computer is now Windows 7 Professional 64 bit that comes with the Windows XP Mode. Essentially what you have in this mode is a virtual Windows XP Professional SP3 32 bit machine (best I can determine, Microsoft Generic Card). I can install Premiere Elements 9 (same serial number as on the Windows 7), and IT WORKS, no problem with the Get Media/Files and Folders. The one glitch in this perfect solution is setting up to burn to DVD. The Windows 7 Windows XP Mode Virtual Machine will not recognize installed internal DVD/CD drives when you go to write a DVD. The explanation is that the optical drive in XP Mode is a virtual device - read only. I have confirmed this. In order to use Premiere Elements 9 PC burn to disc in this Windows XP Mode , my answer here appears to be plugging in an external DVD burner USB and then using the USB Attach of the Windows XP Mode.
    When Premiere Elements 9 PC was released, I was forced into much troubleshooting of the display issues which are very widely documented here. But then I was using "a real" Windows XP Professional SP3 32 bit" with a NVIDIA card. In the trial version, the BadDrivers.txt and VideoRenderer.dll got me through that episode. For me, the purchased version "essentially" was not afflicted with these same problems, and it has been running great. Now when I go to a new computer system for better performance/greater computer resources (by the way, Intel HD Graphics card), Premiere Elements 9 runs great for two weeks and then this no Get Media/Files and Folders matter sets in accompanied by program going completely knocked out by the event. In all of this, old or new, I have Premiere Elements 7, 8, and 9 installed on the same computer. While Premiere Elements 9 is being hit with these issues, Premiere Elements 7 and 8 are not , same computer environment, same source media, same project preset, et al. For me, the Premiere Elements 9.0.1 has not hit the mark.
    I have done extensive troubleshooting of the this current matter, too long and involved to go into now. I am preparing a full detailed description of the issue and the troubleshooting that went into the search for a fix. I will be posting it at the forum that I frequent. When I post it there, I will supply a link to it for whomever is interested. I have filed a bug report with Adobe on this matter in abridged format as per the space provided in its bug report online form.
    Thanks again for posting.
    ATR

  • File Import Failure with Adobe Premiere Elements 11

    I've just installed Adobe Premiere Elements 11 on my Windows computer. I have started a video project, saved it and when I tried to re-open it I got this File Import Failure message "This type of file is not supported or the required codec is not installed". What do I do? Thanks for your help!!

    I've just installed Adobe Premiere Elements 11 on my Windows computer. I have started a video project, saved it and when I tried to re-open it I got this File Import Failure message "This type of file is not supported or the required codec is not installed". What do I do? Thanks for your help!!

  • File import failure in premiere pro on specific files

    I have installed the latest version of Premiere Pro CC 2014. I am trying to import several video files that i have recorded on a Canon 5D Mark III. The problem is that while some of the files gets successfully imported, many files cant import because of a error message, file import failure. Unsupported file format etc. I have tried to open this in many media players, and all work fine there. I have even imported these files on the same Premiere Pro-version on a different machine, and there they work perfectly. But on this machine some files just wont open. Does anybody have a clue or tips on how I can fix this? I guess its a problem within the software.

    It just seems to pick certain files and reject them.
    Which ones does it eject? eg do they have a different file extension from the video files.
    Are they rgb?

  • Quicktime file import failure in CS5 After Effects and PPro

    Running a Dell PC with a fresh install of Win 7 Pro, Intel Quad Core 2 with 4GB.  Ram.When I try to import quicktime files into AE or PPro, I get a file import failure or corrupted file message.  I am using quicktime version 7.6.6.  I have tried uninstalling and removing all preferences, then reloading older versions of quicktime (7.2) rebboting the machine, and still no luck.  Any tips would be appreciated.  I have not been able to get any help from Adobe.  I have a laptop setup the same way and it works great.  I even tried loading the exact same versions of qt. and tried to use the Importerquiktime.prm file from that machine.

    I appreciate the feedback.  I checked the processes upon AE start and found that the Adobe QT server32 starts then closes in the processes before AE actually loads up.  If it is supposed to remain open, it does not.  I can not find where to change its permissions.  I looked the site you sent a link to, but do not see that section.

  • Mxf File import failure

    Dear All,
    I have a problem to import files in CS4 from a Sony PDW-U1(MPEG2 HD 50CBR_1920_1080_422P@HL" formatFps="50i") on my new HP Quad Core 4600.
    The error message: file import failure "Unsupported format or damaged file" but is not damaged.
    The PC don't have a capture card and I don't need it, I just want to import the mxf and edit it on the timeline then encode in flv.
    Someone have an idea?
    Many thanks
    Claudio

    MainConcept sells a fairly expensive PP plugin that supposedly will read the Sony XDCAM HD 422 50 mbps MXF files. I downloaded the demo, but I could never get it to work right, because according the MainConcept, it won't install correctly if you have both CS3 and CS4 components installed. Maybe your luck will be better:
    http://www.mainconcept.com/site/prosumer-products-4/xdcam-22351/information-22391.html

  • File Import Failure

    I just tried to open a video I have been working on in Adobe Premiere Elements 11 editing software and I got an error message saying "File Import Failure. The type of file is not supported or the required codec is not installed." How do I fix this so I can get access to my file again? Thanks!!

    Do you get the "Missing CODEC, or file not supported" error message upon Import?
    If so, this FAQ Entry might be helpufl" http://forums.adobe.com/thread/1050730?tstart=0
    Good luck,
    Hunt

  • 5.1 WAV Import Failure

    If I try to import a 5.1 Wav file into Premiere CS6 which was exported by Audition CS6, I get an Import Failure Error:
    The file will also not play in Windows Media Player.  Does this work for anyone else?
    Terry

    Hey Bill,
      It's a 5.1 .wav file and although I pasted  a screenshot of the error in my post, apparently those don't get through.  Premiere's message was that it has a header error.  Nothing more useful than that.
    Terry
    Sent from my iPad

  • Why do I get an error msg : file import failure?

    Why do I get this error message? File import failure? I am using video clip from Iphone 4S.

    Have you tried trashing your Final Cut Pro preferences? It is usually the first step when FCP begins to act in unexpected ways.
    Download Preference Manager (free) from Digital Rebellion
    http://www.digitalrebellion.com/prefman/
    and use it to trash your preferences - they will be set to default the next time you open FCP.
    If that does not remedy the problem, do you have any still images in your timeline that are not RGB, or are greater than 4000 pixels in the widest dimension?
    Is your source material in an FCP7 edit friendly codec?
    MtD

  • File Import Failure; File has unsupported compression type!

    I completed editing my movie about two weeks ago did all the colour correction audio etc last week, and aim to complete the sutitling tomorrow!
    But now the problem is that my some of my files are now offline and can't be relinked because I get an error message which says "File Import Failure; File has unsupported compression type"
    These files are .MTS which I believe are AVCHD.
    So I don't know what has happenned here. Is it the recent update that has caused this or something else?

    This have happend to me twice now.
    If I remember correctly it have to do with Cloud membership in my case. Both times I have been away on work and when I get home I have a email stating that payment have failed. After I set it right I start up Premiere and I get this failure.
    First time the solution was uninstall Everything Adobe and run clean script. Reinstalling did the trick.
    That solution is not working in the long run.
    Here Adobe needs to do something soon!

  • Call Hander cisco unity conection

    Dear sir !
    I have a case using call hander on Cisco unity conection
    this is a case:
         - Dial 1800 (IVR) --> the Welcome Messages
         - After call Handler-> auto routing call to Operator (0)
    I config dial IVR ok. After call handler the system tranfer to Operator, but the system message " we tranfer the call". I want to disable system message
    Please help me
    Thanks

    Good Day,
         In Unity Connection 7.X or latter on the call handler template check box, have a look at http://cisco.biz/en/US/docs/voice_ip_comm/connection/7x/gui_reference/guide/7xcucgrgpdf.pdf and search for the term “Wait While I Transfer Your Call” in the PDF.
    Hope this helps,
    Craig
    (PLEASE RATE HELPFUL POSTS)

  • Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

    Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

    See this lnk for a fix, it worked for me!
    http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

Maybe you are looking for