Code for "not like"
Hi,
What is the code for "Not Like" in Oracle? For Example, I want to find out records that does not contain the charactor "RT".
Thanks.
Jun
select column_name from table_name
where column_name not like '%RT%';
Hope this solves your problem.
Similar Messages
-
Alternate for NOT LIKE....
I am using NOT LIKE in sql query....it is running gud in dev instance,But in prod instance it is causing performance issue.
can any one pls suggest alternate for NOT LIKE.
But in dev n prod having same data.
Thanks,
SaiHi Saichand,
well, actually what do you expect? ;)
You ask the DB to filter out specific lines and this takes time.
What worries me is the fact that it performs fine on the development environment, but runs slow on the production environment. Did you find out what the reason for this is? Is the prod system loaded too heavily?
There are many alternatives for "NOT LIKE". Within SQL and even outside of SQL. You can do the filtering in the final application even. Would not recommend this, but sometimes it's faster to just stream the data to the final application and to the processing there (if the processing takes lot of CPU and your DB is anyway loaded already too much).
I'd try to find out why the dev is faster than the prod env. Normally it should be the way round ;)
regards,
David. -
Hi, I use iphone 4 version 4.3.3 (8J2). I have downloaded my ICICI bank's application 'iphone imobile'. It asks for an activation code which it instructs to send a text message 'imobile iphone' to 5676766. I have done that umpteen times but problem is that i don't receive any reply. I have faced a similar problem while receiving activation code for another application 'Whatsapp', but fortunately Whatsapp gives an option of receiving activation code through alternate mode so i got the activation code through mail. Unfortunately ICICI Bank gives the activation code ONLY through a text message.
In this case there seems to be a problem with iPhone receiving activation code. Can anyone help me out here?
Amber Paintal
iphone 4 version 4.3.3 (8J2)Hi, I use iphone 4 version 4.3.3 (8J2). I have downloaded my ICICI bank's application 'iphone imobile'. It asks for an activation code which it instructs to send a text message 'imobile iphone' to 5676766. I have done that umpteen times but problem is that i don't receive any reply. I have faced a similar problem while receiving activation code for another application 'Whatsapp', but fortunately Whatsapp gives an option of receiving activation code through alternate mode so i got the activation code through mail. Unfortunately ICICI Bank gives the activation code ONLY through a text message.
In this case there seems to be a problem with iPhone receiving activation code. Can anyone help me out here?
Amber Paintal
iphone 4 version 4.3.3 (8J2) -
How to get source code for commands like diff or cat
Hi all
I'm learning c programming and i'd like to read some code for the basic commands on the linux system
I remember apt has one such option that allows getting pakcage source code
is there a similar one for pacman ?
or do i have to search those source code myself ?
and also in BSD system all the codes are availeble in a code repository
thxdiff and cat. Or was that too literal?
Last edited by Ghost1227 (2009-04-18 23:57:55) -
Short code is not working after new firmware updat...
I am in USA on T-mobile network. I recently updtated my N80 to the latest firmware 4.07.XXX. Everything worked fined especially VoIP features. However, I used short cut code for example like #MIN# to get my min usage status for my acct. It sends the message but not receive back the message like it used to be. Is anybody have similar issue? None of the short code is working on my phone.
My favorite N80 applications: Nokia Mobile Search, Smart2go Beta,
S60 Internet Radio, Mobile Weather.
N80ie Firmware: V 4.0707.0.7 (March 28, 2007).Hard reset your phone *#7370# 12345 reformat, lose all data and don't install apps on your memory card.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
Belgium Tax Code for Invoices & Credit Notes
Hi,
According to SAP note 174811 (Configuring a Belgian Company Code) a distinction must be made between the VAT codes for SD invoices and credit notes:
"... distinction which is obligatory, is the distinction between
invoices and credit notes for which separate codes have to be
created. The reason is that the VAT generated by an input tax code
on credit notes must be posted to an output VAT account instead of
an input VAT account, and reversals of invoices must be seen as an
invoice in minus and not as a credit note."
However the standard MWST condition record does not provide the option of splitting the tax code determination by document type (VK11). Has anyone encountered this issue before or can you suggest a solution to this problem?
Your help is very much appreciated.
Kind regards
PHi Riaan,
Could you confirm your current path set is correct to the shared folder? It should be something like
YourServer\B1_SHR\WordDocs\*LanguageCode*. Check if you have that kind of folder on your B1 shared server.
Thanks,
Gordon -
UNSPSC code is not passed for RT catalog item then error !!
Hi SRM GURUs,
We have implemented BBP_CATALOG_TRANSFER BADI.
In which if a RT catalog item is not having UNSPSC code then we are passing some generic material group for that particular item.
Here the issue is, if a UNSPSC code is not passed for a RT catalog item, then system is throwing error message "No logical system for FI is maintained. inform system admin".
Also, a pop-up is coming on SRM screen "Error in system;shopping cart cannot be processed further" and then after clicking on "OK" of the POP-UP it is taking me on SRM home page.
will anybody explain why this is happening ? Kindly, explain this logic (As this logic is in standard SAP program)?
PS: we are at SRM5.0 & CCM2.0.
Thanks !!
VivekHi Masa,
we tried with blanking out the material group. we have got few errors but not of type like above mentioned.
The errors are as follows.
Cost center should not be blank
Service Account assignment should be Cost Center(Services) or Cost Center(Sched Services) or Network
Tax code ZZ in procedure TAXUSX is invalid
No G/L account was entered. Enter a G/L account
Product category 41E532538A930138000000000A4023DB does not exist
Enter the product category
Error in account assignment for item 1
Not possible to calculate tax
In SLG1 the log is green and contains following.
Start of line 000000 in shopping cart of catalog
External product category 26111710 contains errors or does not exist
where the number 26111710 is the UNSPSC code which i was deleted while debugging.
Please help on this.
Thanks in adv.
Vivek -
Dear all,
I would like to change the default country code for new Outlook 2013 contacts. My country is Mozambique (+258) and is not listed under Control Panel> Region> Formats> Format:
Is there any place (registry maybe, anywhere) where I can manipulate the existing formats or manually add a new format to the List ??? - for example Portuguese (Mozambique).
I am using Windows 8.1
I have tried changing the country on the phone and modem options and nothing changes. Also changing the Home Location on Region> Location to Mozambique didn't change a thing. The only place where I change something and produces results is the
Format List.
Any ideias???? If not, is there a place where I can ask Microsoft to include Portuguese (Mozambique) on future windows updates???
Kind regards,
OsvaldoHi,
Windows uses the information set under
'Phone and Modem' in the Control Panel to determine the default area code.
You can change the country/region to
Mozambique
and set your area code here:
Regards,
Steve Fan
TechNet Community Support -
ADSI does not return proper code for Password Expired
We are trying to modify a vendor supplied system to get it to authenticate using our LDAPs. The vendor app is a hybrid IIS ASP/ASP.NET application so it seems necessary to use ADSI for authentication. We have had the solution working for more than a year, but now we want to expire passwords in our LDAP.
We have been testing with both Netscape Gateway LDAP engine 4.13 and/or Sun One Directory Server Version 5.2. At the moment, the problem I am facing is that I get the same error code from ADSI whether the attempted password is bad or the user DN and password are good but the account has expired. In other words, I cannot differentiate between an expired password and bad typing during the login attempt.
In either case [bad password or password expired], I get, -2147023570 Automation error Logon failure: unknown user name or bad password. I can log in successfully with an unexpired UID/password using the code so it looks like I have no code error. I have tried several times to make sure I am typing everything OK. My results are consistent.
I have found example code on the web that suggests I should be seeing the "error -2147016672 (1 from NDS) - password expired".
Could there be some sort of Netscape or Sun One LDAP configuration parameter that prevents sending the password expired error code/message?
Any other ideas what might be wrong?
We've tested using VB, VBScript [directly] and VBScript in ASP. Always the same results.
Here are the relevant sample lines {in VBScript}
Set adsDSO = GetObject("LDAP:")
on error resume next
Set adsUser = adsDSO.OpenDSObject("LDAP://ourmachine.cusys.edu:portGoesHere/uid=" & UserName & ",o=whatever,c=US", "uid=" & UserName & ",o=whatever,c=US", Password, 0)
if err.number 0 then
if err.number = -2147016672 then
' Cannot seem to get here.
response.write "Error code: " & err.number & "<P>"
response.write "Error code for expired password<P>"
elseif err.number = -2147023570 then
response.write "Error code: " & err.number & "<P>"
response.write "Error code for bad credentials<P>"
else
response.write "Error code: " & err.number & "<BR>"
response.write err.description & "<P>"
' do more stuff ...Did you check SAP notes? Maybe the OS creates the file in DIR_HOME directory when the path is invalid. Could you check in AL11? You may also add "MESSAGE msg" to the "OPEN DATASET", maybe you'll get more information.
-
Can not get area code for skype number
I am trying to purchase skype number in the Uk the city is Belfast. In the drop down menu there is no area code for Belfast. I have even tried Ireland still nothing.
Hope someone can Help!
Many ThanksHi, Darwal, and welcome to the Community,
Unfortunately, if the particular exchange you wish to have for a Skype Number does not appear on the list, then it is truly not available for any number of legitimate reasons. Check back periodically to see if the exchange becomes available; Skype does not announce when a fresh batch of Skype Numbers are newly added.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
I have a cart of 25 ipads with a macbook air. I have logged into my VPP account and purchased the needed number of copies. I downloaded the spreadsheet. I took the first code from the spreadsheet, and logged into itunes using a regular account (not my VPP account), and used the code to download the app. I put the app into configurator and then tried to add the spreadsheet with the codes in it. It comes up and tells me that it is not the correct spreadsheet for that app. But it is the correct spreadsheet!! I tried re-downloading the spreadsheet again and even tried re-downloading the app. So I've now used two of my redeem codes and still can't get it to accept it into apple configurator. I removed the app from apple configurator and re-added it. The error message says it's not the right codes for the app "Grammar Games by Tap To Learn" and to please get the codes for "Grammar Games by Tap To Learn." It's the same one!
It won't let me edit my post, so I'm typing this reply to add...
I tried taking the version number out of the title. It looked like there were two spaces in the title "Grammar Games by Tap to Learn". So I even made sure that matched. I still can't import my codes. Any other things to try would be really appreciated. -
I bought an Iphone 4S 16Gb from softbank - Japan. I would like to buy an active code for my Iphone, how can I do and where can I buy?
That iPhone is useable only on the softbank network. Softbank does not
unlock iPhones for use on other networks. Sell that iPhone to someone who
can use it on Softbank and use the money to buy an iPhone that will work
with your wireless provider. -
Code for last of us not on receipt
I have recently purchased a PS4 with the digital version of last of us included as a bundle. It said on the box that the code would be on my receipt. I have checked my receipt many times and entered all the codes that looked like possible ones and none of them worked. I am sure the code is missing. Please help
Hi anraha,
What better way to get into the newest generation of gaming consoles than to pick up a PS4 that already has The Last of Us included! I’m yet to pick up a PS4, but if I do, you bet it’ll be one that’s bundled with a free game. With that said, it sounds like you may have not been able to take advantage of your free game and I apologize for this.
Using your email on file for the forums, I’ve attempted to locate your purchase receipt and I’ve been unable to do so. At your earliest convenience, please send me a private message including the Customer Service PIN located at the bottom of your receipt. Please also include the phone number that would likely be associated with the purchase. To send me a private message, simply click the link in my signature.
I look forward to hearing from you and researching this further!
Brian|Senior Social Media Specialist | Best Buy® Corporate
Private Message -
I would like to control my iPod doc with my Denon remote. Does anyone know he numerical remote code for an apple iPod doc?
Hi kwg06516,
This remote(RMT-B126A) doesn't have programmable codes because its not a universal remote. It is exclusive for your player(BDP-S3200) only. It may control other devices such as TVs but with the same brand only.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution" -
Can not view the code for views, triggers or table definition
Hello Gurus,
I can not see the code for any of the triggers, views, tables etc. in sql developer. For instance a view code will be
"create or replace" and then nothing, I could see the code in the past.
When clicking on SQL tab for table I get following errors
1. Ora-00904 Invalid Column name
2. Ora-31600: invalid input value emit_schema for parameter name in function SET_TRANSFORM_PARAMORA-06512: at SYs.DBMS_SYS_ERROR............................
please advice.
ThanksSqldev was only certified starting from 9.0.2, so it's possible that's the culprit. The latest update in the certification document even omits 9i entirely.
Did it start happening after upgrading sqldev? What version are you on?
K.
Maybe you are looking for
-
Shared realm does not exist in EBS R12.0.6
Hi, I am having some problem with the database startup. when i ran startup command through sqlplus database starts and after 30 sec it gets terminated. When trying to connect with apps it returns: SQL> conn apps/apps ERROR: ORA-01034: ORACLE not avai
-
How to back up 'new files only' to external hard drive?
not sure i'm doing this the best way.... any suggestions would be great! i have my master photo/video library on my desktop (using a file tree that i've grown & know exactly where things are since 2003- (pre mac). that file is on mac + saved to an e
-
My Macbook Pro (2010, 10.9.5) turns off by itself randomly
Hi all My Macbook Pro (mid 2010, 2.53 GHz, ram 4GB, Intel Core i5, Mac OS 10.9.5) turns off randomly while I am working. The screen turns black and I get a message that my "mac was turned off due to a problem". It turns on again and all seems normal.
-
This above Error message will appear when my file size increases, I am not able to integrate my developed PDF froms....Please Help me in this regard and its very important for me to complete my work as soon as possible. First I will get this below Er
-
Hi, Just purchased iWork 08 and trying to send my Keynote presentation to iWeb but the function is greyed out - it is not allowing me to do this. Any idea why?