Code help regarding replace

Hi ,
I need to delete the characters '####' from one of the fields of an gt_data.I have used the followin code to do it.
I also have a problem with append .there are two records created ...but I want only one without the '####'
please correct the code for me.
SPLIT get_data AT con_tab
             INTO
           gt_data-vbeln gt_data-bolnr
           gt_data-status gt_data-service
           gt_data-charge gt_data-box
           gt_data-date.
APPEND gt_data.
IF NOT gt_data IS INITIAL.
    REPLACE '####' WITH co_space INTO gt_data-bolnr.
    CONDENSE gt_data-bolnr NO-GAPS.
ENDIF.
APPEND gt_data.
Message was edited by:
        ramana peddu
null

SPLIT get_data AT con_tab
INTO
gt_data-vbeln gt_data-bolnr
gt_data-status gt_data-service
gt_data-charge gt_data-box
gt_data-date.
<b>*APPEND gt_data. "Remove this one</b>
IF NOT gt_data IS INITIAL.
do.
if gt_data-bolnr ca '#'.
REPLACE '#' WITH co_space INTO gt_data-bolnr.
else.
exit.
endif.
enddo.
CONDENSE gt_data-bolnr NO-GAPS.
ENDIF.
APPEND gt_data.

Similar Messages

ABAP code help to replace one field with another

Hi All,
I have one DSO which is holding data for fields WBS(Old) and Company Code(Old).
and I have one table which holds the information for Ols WBS and Ols Comp Code along with their New WBS and New Comp code.
for eg:
In DSO :
Old WBS , Old Comp.Code
abc        , 001
xyz        , 002
In Table:
Old WBS , Old Comp.Code , New WBS , New Comp.Code
abc,           001,                    ABC,            001-04
xyz,           002,                    XYZ,            002-04
Now my requirement is ,
search record by record from DSO and look into the table .
If abc record in DSO matches with abc record in table, then in DSO it should replace with new WBS and Com.Codes.
after the code, data in DSO shuld be lik this.
WBS , Comp.Code
ABC , 001-04
XYZ,   002-04.
Thanks in advance,
Sai Chand.S

Hi
If these fields are key fields dont think its possible to overwrite. Else plz write the following Code in End Routine it will overwrite the existing values in DSO.
Select * from DSO into it_dso_temp. "U can even select only key fields WBS and CC fields.
If sy_subrc=0.
Sort it_dso_temp by WBS CC.
endif.
Select old WBS
           old CC
           new WBS
           new CC
from Table
into it_table
for all entries in it_dso_temp
where old WBS = WBS and old CC = CC.
if sy_subrc=0.
sort it_table by old WBS, old CC.
endif.
Loop at it_dso_temp assigning result_fields.
Read it_table into wa_table with key old WBS = fs_dso_temp-WBS
                                                           old CC = fs_dso_temp-CC Binary SEarch.
If sy_subrc = 0.
result_fields-WBS = wa_table-new WBS.
result_fields-CC = wa_table-new CC.
endif.
Endloop.
Refresh result_package.
result_package[] = it_dso_temp[].
Also if incoming data has only old values u can loop at result package instead of it_dso_temp. let me know in case of issues.
hope this helps !
Reg
Aparna

Help in replacing the country code 0044,+0044,44,+44,004400 t0 0 in informatica

Hi gooday all , I need a help in replacing the phonenumber country code to 0 where the combinations in my source can be 0044,+0044,44,+44,004400. All the above combinations need to be replaced with 0 . Any help in this regard is appreciated . Thanks in Advance. Omprakash.

맥심카지노ホ【ＴＯＰ０１５、Ｃ0Ｍ【ホ바카라사이트맥심카지노ホ【ＴＯＰ０１５、Ｃ0Ｍ【ホ바카라사이트【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노맥심카지노ホ【ＴＯＰ０１５、Ｃ0Ｍ【ホ바카라사이트【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노【맥심카지노

Need Help in Replacement of Function Modules

Hello all,
I am working on Upgrade project from ECC 5.0 to ECC 6.0. I am facing problems for Replacement of two Obsolete Function Modules. Please give me a solution. FM's are as follows.
1) SET_AUTHORITY : This FM is obsolete in ECC 6.0 and there is not alternative FM present in help.sap.com or any other web portal.
2) WS_QUERY : Here as per my knowledge we use class CL_GUI_FRONTEND_SERVICES and methods FILE_EXIST or DIRECTORY_EXIST as per the parameters in old FM. For parameter 'FS' we use 'FILE_EXIST' and 'DS' we use 'DIRECTORY EXIST'.
But in our program prev. FM has parameter 'OS' i.e. Operating System.
But there is not method called 'OS EXIST' or similar. Please suggest suitable method.
Thanking you all in anticipation.
Best Regards,
Harish

Hi Harish,
                   I too could not find any replacement for SET_AUTHORITY
Obsolete Modules can be used in newer versions, but it is not supported by SAP in case of any technical issues.If you still need a replacement, you can replace it by the source code in the FM SET_AUTHORITY itself and modify according to your needs.
Below is the source code of FM SET_AUTHORITY, so you can modify it according to your requirement.
DATA: l_actvt TYPE tact-actvt,
        l_hier   TYPE STANDARD TABLE OF sethier WITH HEADER LINE.
CASE action.
    WHEN 'A    '.
      l_actvt = activity-add.
    WHEN 'C    '.
      l_actvt = activity-modify.
    WHEN 'D    '.
      l_actvt = activity-display.
    WHEN 'E    '.
      l_actvt = activity-delete.
    WHEN 'UD   '.
      l_actvt = activity-display.
ENDCASE.
CALL FUNCTION 'G_SET_TREE_IMPORT'
       EXPORTING
            no_descriptions = 'X'
            no_rw_info       = 'X'
            setid            = set
            tabname          = table
            root_header_only = 'X'
       TABLES
            set_hierarchy    = l_hier
       EXCEPTIONS
            OTHERS           = 0.
READ TABLE l_hier INDEX 1.
IF sy-subrc <> 0.
    CLEAR l_hier.
    l_hier-shortname = set.
ENDIF.
CALL FUNCTION 'G_SET_AUTHORITY_CHECK'
       EXPORTING
            actvt = l_actvt
            authgr = l_hier-authgr
       EXCEPTIONS
            OTHERS = 1.
IF sy-subrc <> 0.
    CASE action.
      WHEN 'A    '.
        MESSAGE e827 WITH l_hier-shortname RAISING no_authority.
      WHEN 'C    '.
        MESSAGE e828 WITH l_hier-shortname RAISING no_authority.
      WHEN 'D    '.
        MESSAGE e829 WITH l_hier-shortname RAISING no_authority.
      WHEN 'E    '.
        MESSAGE e830 WITH l_hier-shortname RAISING no_authority.
      WHEN 'UD   '.
        MESSAGE e831 WITH l_hier-shortname RAISING no_authority.
    ENDCASE.
ENDIF.
If you need help in replacing in the above source code, please post your code here so that I can help you in modifying accordingly.
Regards,
Vasuki

Mapping Help for replacing source value

Mapping Help for replacing source value
Posted: Mar 14, 2006 1:06 AM    Reply
Hi all,
I am unable to do transform the source value to required target value,
From Source ADDRESS_TYPE = 'HOME' should be replaced with 03 to target field ANSSA, and 'MAIL' to be replaced with 05, I am trying to do it but i am unable to handle it, please give u r valuable suggestions,
The source structure is like this,
- <Event ID="239" TRANS_TYPE="ADR">
<PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="HOME" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="HOME" KEY3="02/10/2006" />
<PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="MAIL" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="MAIL" KEY3="02/10/2006" />
</Event>
REGARDS,
sridhar

Hi,
This can be done using user-defined function as well.
Code the function as...
if(Addr_Type.equals("HOME"))
   return "03";
else if(Addr_Type.equals("MAIL"))
   return "05";
else
   return "Invalid Address Type";
Here, Addr_Type is Input String Argument for this function.
Map this function between ADDRESS_TYPE and ANSSA.
Regards,
Uma

URgent: Help regarding SQL Query

Hi ,
I need help regarding an sql query.
Sample Data:
ITEM_TYPE ITEM_NUM   UNIT_PRICE QUANTITY       LINE_TOTAL
ITEM         1            5         10           50
ITEM         2           10         5            50
ITEM         1            5          5            25
ITEM                       2         10           20
TAX                                               16.5
TAX                                              -3.5I would like to display the data as
ITEM_TYPE ITEM_NUM UNIT_PRICE          QUANTITY          LINE_TOTAL
ITEM       1          5                 15               145
              2         10                  5
                          2                 10
TAX                                                          13.0
Line_total = unit_price * QuantityThanks in Advance
G.Vamsi Krishna
Edited by: user10733211 on Aug 5, 2009 7:42 AM
Edited by: user10733211 on Aug 5, 2009 7:49 AM
Edited by: user10733211 on Aug 5, 2009 8:12 AM
Edited by: user10733211 on Aug 5, 2009 8:22 AM
Edited by: user10733211 on Aug 5, 2009 8:24 AM

Hi,
Try this, use some analytics:
SQL> with t as (
2 select 'item' item_type, 1 item_num, 5 unit_price, 10 quantity, 50 linetotal from dual union all
3 select 'item', 2, 10, 5, 50 from dual union all
4 select 'item', 1, 5, 5, 25 from dual union all
5 select 'item', null, 2, 10, 20 from dual union all
6 select 'tax', null, null, null, 16.5 from dual union all
7 select 'tax', null, null, null, -3.5 from dual
8 ) -- actual query starts here:
9 select item_type
10 ,      item_num
11 ,      unit_price
12 ,      sum_qty
13 ,      case when sum_lt = lag(sum_lt) over ( order by item_type, item_num )
14              then null
15              else sum_lt
16         end sum_lt
17 from ( select item_type
18         ,      item_num
19         ,      unit_price
20         ,      quantity
21         ,      sum(quantity) over ( partition by item_type, item_num ) sum_qty
22         ,      sum(linetotal) over ( partition by item_type )           sum_lt
23         ,      row_number() over ( partition by item_type, item_num order by item_type, item_num ) rn
24         from   t
25       )
26 where rn=1;
ITEM   ITEM_NUM UNIT_PRICE    SUM_QTY     SUM_LT
item          1          5         15        145
item          2         10          5
item                     2         10
tax                                           13
4 rows selected.
edit
And please use the code tag, instead of clunging with concats.
Read:
http://forums.oracle.com/forums/help.jspa
Edited by: hoek on Aug 5, 2009 5:15 PM
edit2
Also nulls for item_type:
ops$xmt%OPVN> with t as (
2 select 'item' item_type, 1 item_num, 5 unit_price, 10 quantity, 50 linetotal from dual union all
3 select 'item', 2, 10, 5, 50 from dual union all
4 select 'item', 1, 5, 5, 25 from dual union all
5 select 'item', null, 2, 10, 20 from dual union all
6 select 'tax', null, null, null, 16.5 from dual union all
7 select 'tax', null, null, null, -3.5 from dual
8 ) -- actual query starts here:
9 select case when item_type = lag(item_type) over ( order by item_type, item_num )
10              then null
11              else sum_lt
12         end item_type
13 ,      item_num
14 ,      unit_price
15 ,      sum_qty
16 ,      case when sum_lt = lag(sum_lt) over ( order by item_type, item_num )
17              then null
18              else sum_lt
19         end sum_lt
20 from ( select item_type
21         ,      item_num
22         ,      unit_price
23         ,      quantity
24         ,      sum(quantity) over ( partition by item_type, item_num ) sum_qty
25         ,      sum(linetotal) over ( partition by item_type )           sum_lt
26         ,      row_number() over ( partition by item_type, item_num order by item_type, item_num ) rn
27         from   t
28       )
29 where rn=1;
ITEM_TYPE   ITEM_NUM UNIT_PRICE    SUM_QTY     SUM_LT
       145          1          5         15        145
                    2         10          5
                               2         10
        13                                          13
4 rows selected.If you really need a space instead of nulls, then simply replace the nulls by a space....
Edited by: hoek on Aug 5, 2009 5:18 PM

Need help regarding Java decoding of IMAP attachment (IOStream related ques

Hi ,
I need some help regarding the processing of an IMAP attachment , It is a basic IOStream related question I guess.
I have some attachment to a mail , I try to fetch it using javamail and read the content and write it to a file , I was able to do it successfully when I was using stream.read( tempBuffer) function but when I started using stream.read( tempBuffer, 0, m_maxDataSize ); it is giving me following exception
java.io.IOException: Error in encoded stream: needed at least 2 valid base64 characters, but only got 1 before padding character (=), the 10 most recent characters were: "/59PT/eXQ="
     at com.sun.mail.util.BASE64DecoderStream.decode(BASE64DecoderStream.java:259)
     at com.sun.mail.util.BASE64DecoderStream.read(BASE64DecoderStream.java:148)
***Here is the snippet of code that is running this:***
m_contentObj = m_message.getContent();
if(m_contentObj instanceof InputStream)
     System.out.println(" Content is type of InputStream");
     InputStream stream = (InputStream) m_contentObj;
     byte[] tempBuffer = new byte[m_maxDataSize];
     stream.skip( m_currPos );
     int bytesRead=stream.read( tempBuffer, 0, m_maxDataSize );
     System.out.println(" Read the following no of bytes from the Object::"+bytesRead);
     m_currPos+=     bytesRead;
Please suggest what to do.
Thanks & Regards
Saurabh

BUMP, just incase its been missed by a new board member

MD4C standard Transaction Code Help

Dear All,
I need help I want to add multiple selection screen option for WBS element in MD4C transaction. (Report Name: PP_ORDER_PROGRESS).
If anybody has a similar issue could you please help me out without changing standard transaction code?
Regards,
Chanda.

Hello,
You mean transaction type? Then for Service Desk it is SLFN. It is not recommended to open Issues (SLFI) directly from the CRMD_ORDER transaction. You can also open change requests (SDCRs) from CRMD_ORDER, and later assign them to the maintenance cycle.
Best regards,
Miguel Ariñ

Help regarding ABAP and ABAP Objects

Dear all,
I am very new in abap and abap objects. But i have some expr. in other language..specialy development. Right now i am working for srm module...So i want to move my self into abap object and specialy in workflow...Please provide me help regarding this...along with the starting point for this.
Best Regards
Vijay Patil

hi
Object Oriented prg
A programming technique in which solutions reflect real world objects
What are objects ?
An object is an instantiation of a class. E.g. If Animal is a class, A cat
can be an object of that class .
With respect to code, Object refers to a set of services ( methods /
attributes ) and can contain data
What are classes ?
A class defines the properties of an object. A class can be instantiated
as many number of times
Advantages of Object Orientated approach
Easier to understand when the system is complex
Easy to make changes
Encapsulation - Can restrict the visibility of the data ( Restrict the access to the data )
Polymorphism - Identically named methods behave differently in different classes
Inheritance - You can use an existing class to define a new class
Polymorphism and inheritance lead to code reuse
Have a look at these good links for OO ABAP-
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com.
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
check the below links lot of info and examples r there
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
Hope this helps
if it helped, you can acknowledge the same by rewarding
regards
ankit

Need Help Regarding Enabling The Matrix

Hi All,
We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
Regards,
Jayanth

Hey first bind the columns of matrix to any user datasource
and then you can enter any thing into your matrix
following code may help
suppose you have one column
oForm = SBO_Application.Forms.Item("URFRM")
oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
oMatrix=oForm.Item("URMATRX")
oMatrix = oItem.Specific
oColumns = oMatrix.Columns
oColumn = oColumns.Item("URCOLName")
oColumn.DataBind.SetBound(True, "", "URDSName")
oMatrix.Addrow()
hope this will help
additionally you can look at this sample
.....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources

Need help regarding the dunning form

Hi,
I have to display all the sales and payments of a cusomter for all the periods that are older than the run date in a dunning form. (i.e) if the run date is 04-aug-05 and if the slaes are there in 3 months(april, May, july) then i have to display three line items with sales and payments for that corresponding three months in the line items. As this is a dunning form i cannot change the print program. any table which have all the sales for a period which i can access directly in the script. can anyone suggest how to handle this.
regards,
Asha

Hi,
You can call a subroutine within a program (your z program)
/:   PERFORM ADD_AMOUNT IN PROGRAM SAPLZFTP_F150
/:           USING &W_AMOUNT&
/:   ENDPERFORM
In the z program create this subroutine.
      Form ADD_AMOUNT
     -->FT_INVAR Text Symbol table for input variables
     -->FT_OUTVAR Text Symbol table for output variables
FORM add_amount TABLES ft_invar   STRUCTURE itcsy
                       ft_outvar STRUCTURE itcsy.
STATICS:
    w_value_l    TYPE f150d-salfw.
        READ TABLE ft_invar INDEX 1.
        IF sy-subrc IS INITIAL.
you can check all this part of the code how you want to
process your data whether its numeric or character or
whatever
           w_value_l = w_value_l + ft_invar-value.
        ENDIF. "IF sy-subrc IS INITIAL.
ENDFORM.                    " ADD_AMOUNT
TO BESPOKE THE PRINT PROGRAM FOR THE DUNNING
Dunning outputs use the function module FI_DUNNING_PRINT_NOTICE. You can copy this to a Z function module and make some changes to the data selection. You will have to look into the code and decide what changes you need.
The process to use a bespoke program to do the dunning print is as follows:
UNDER FI GLOBAL SETTINGS in the configuration,
There are Business Transaction Events. Within that you can configure the same to enable a Z function module in place of the standard function module (from the FUNCTION GROUP F150)
Create function group ZFTP_F150
Copy standard function module FI_PRINT_DUNNING_NOTICE of function group F150 to ZFTP_FI_PRINT_DUNNING_NOTICE in function group ZFTP_F150
Copy standard function module PRINT_DUNNING_NOTICE of function group F150 to ZFTP_PRINT_DUNNING_NOTICE in function group ZFTP_F150
Within the function module ZFTP_FI_PRINT_DUNNING_NOTICE, change function module call for PRINT_DUNNING_NOTICE to ZFTP_PRINT_DUNNING_NOTICE
Create a new include ZFTPI_ROUTINES within the function group and copy the subroutines LOG_MSG, LOG_MSG_TAB, & LOG_SYMSG from the function group F150 to this include
AS AN ALTERNATE, YOU CAN COPY THE WHOLE FUNCTION GROUP
Maintenance view TBE31 (SM30). Change the function module from FI_PRINT_DUNNING_NOTICE to ZFTP_FI_PRINT_DUNNING_NOTICE against the event 00001720 FI-FI entry
Hope this helps.
regards,
Satya

Need Help Regarding LOAD_TYPE_VERSION_MISMATCH

Dear gurus
While executing T-code vl01n vl02n vl03n
im having this error
LOAD_TYPE_VERSION_MISMATCH
Short text
    Change of a Dictionary structure at runtime of a program.
What happened?
    Runtime error
    The current ABAP program "SAPMV50A" had to be terminated because one
    of the statements could not be executed at runtime.
What can you do?
    Restart the program.
    If the error persists, contact your SAP administrator.
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Please help me
Regards
Saad

Hi Saad,
if i call the vl01 i've got a raise exception with internal error:
   74 FORM CUKRX_GET_STATUS_RELEASED.
   75
   76 * IF CUKRD_KNSTA_RELEASED IS INITIAL.
   77     SELECT * FROM TCUX WHERE KNREL = 'X'.
   78       APPEND TCUX-KNSTA TO CUKRD_KNSTA_RELEASED.
   79     ENDSELECT.
   80     IF SY-SUBRC <> 0.
   81 *..identifier for status 'RELEASED' not found........
   82       RAISE INTERNAL_ERROR.
   83     ENDIF.
   84     SORT CUKRD_KNSTA_RELEASED.
   85 * ENDIF.
And this table is empty, so it raises the internal error.
What show your st22-output about the ABAP code ?
regards
Kay

Regarding Replacement of Iphone5

Hello sir , I am facing alot of problem with my Iphone 5 (Touch is not working Properly , Battery back up is not good , Network Problem , Sometimes it get hang ) , This is My first Apple Product ,It was like dream for me and I was very much excited for this product but unfortunately i was very much shocked after seeing so many problems , I dont think so that your local service station would help me as i am not satisfied with their service and dealing , Kindly please help me Regarding Replacement of my Iphone5 as soon as possible , I ill wait for your reply, Thank you

You are not communicating with Apple when you post in these forums. These are user-to-user technical support forums. If you are in India, as I'm guessing, and are not happy with the service you are receiving from your current service provider, you can find other authorized iPhone service centers via this web page:
https://locate.apple.com/in/en/
If you purchased your iPhone directly from Apple, you can also call Apple Support:
http://support.apple.com/kb/HE57
Regards.

Help Regarding Emoticons....('',)    ??

Hello to all experts,
I need some help regarding my Chat program...
Can anybody should tell me how to access Emoticons images from a particular destination or source using a java code....
Or Is there any way to access that emoticons using XML file...so that it will then read from a Java code....??
XML file look like as :-
<root>
<img1>path of the image or emoticon</img1>
<img2>.........................     ........................</img2>
</root>By using above file i will read emoticons using Java code....??
Is there any function , Method or a sample code to do that job...
Thanks in Advance.....

Thanks DrClap....
One More thing I want to knw from you.....
Actually Other then this Emoticons help....
I had given a post in Java Help System for getting help regarding How to open a HelpSet file from a java code By just putting JH.Jar in my Lib path.
I am using the following program to do so...
public class JavaHelpDemo extends JFrame
private HelpBroker someHelpBroker;
public JavaHelpDemo()
HelpSet hs;
try
        File f = new File("Master.hs");
        URL url = f.toURL();
        hs = new HelpSet (null, url);
        HelpBroker hb = hs.createHelpBroker();
        new CSH.DisplayHelpFromSource(hb);
        hb.setDisplayed(true);
      catch (Exception a)
        System.out.println("Error is here");
        System.out.print(a);
// constructor
public static void main(String[] args)
JavaHelpDemo javaHelpDemo1 = new JavaHelpDemo();
}//classActually my this program is running well and I m getting my helpset only when i insert all my files with htmls in my source path.....
I hav created a Jar or all these files and named it Help.jar
is there any way just to call that helpset using this jar without giving all files into source path.....
Regards,
Daman.

Redemption Code Help, where do I locate it?

Redemption Code Help, where do I locate it?

You have activate the subscription only once in the month of August 2014, so you can activate it one more time, if the Cc is asking for serial number then please follow the steps:
Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
So you need to login with your Adobe ID and password to activate the cloud membership.
Log out & log back in of the CC Desktop App.
In case it is not signing in successfully please try the following:
I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
   Windows:
   In windows 7 navigate to following location:
     /windows/system32/drivers/etc
   1. look out for "Hosts" file
   2. Open it with notepad
   3. Check if you have any entry for Adobe
   4. Remove the entries and try again launching any product from CC
   On Windows XP navigate to following location:
   \windows\system32\drivers\etc
   1. look out for "Hosts" file
   2. Open it with notepad
   3. Check if you have any entry for Adobe
   4. Remove the entries and try again launching any product from CC
   Mac:
   1. Please click on "Go" and navigate to /private/etc
   2. Open "hosts" file and check out for any entries for Adobe.com
   3. Remove the entries and save the file
   4. try again launching any product from CC
You can refer :
http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-i ssues.html.
Please let us know if it worked.
Regards,
Rajshree

Code help regarding replace

Similar Messages

Maybe you are looking for