Code Page Setting while extracting data using Generic Data Source

Hi,
Can anybody tell me about the Code Page setting used in Generic Data Source in SAP BW 3.5?
I am extracting data from a Master Table using Generic data Source, but the data which is in Ukrane language is getting loaded as "#". Where do we set the Code Page for it?
Regards,
YK.

To continue with earlier question, is there any particular setting for a master data, to load non english data as a text of master data?
I want to load TEXT of a master in Ukraine language. I am extracting this text from the P table of same master (From Description Field). But TEXT is not getting populated whenever it is Ukraine language. English TEXT is populated correctly.
Please share your experiences...
Thanks,
YK.

Similar Messages

  • Problem during extraction using generic data sources

    Hi
    While performing extraction(master data)  using generic data sources I am getting a problem.
    while selecting application component, I am unable to find SD to select it.What should I do?
    I selected CRM as application component and did the extraction , it is successful.
    But what about if we want to select SD? I am guessing it as an installation problem ... Anyone plz help me
    Thank you
    Deepthi

    Hi Deepthi,
    Looks like the RFC connection between source system and BW system is broken..
    Contact your basis team to check the connection what went wrong.
    once the connection is re-established you can gohead ...
    Try out this procedure
    Type Transaction SM59.
    a.) Open the RFC Destinations.
    b.) Find your Source System and double click on it.
    c.) Technical setting should contain information regarding your source
    system
    d.) Logon Information should contain source system client and name &
    password for you remote logon.
    **Suggestion : our remote name for our R/3 was ALEREMOTE. We use
    BWREMOTE so that we can monitor without confusion.
    e.) Execute your 'Test Connection' & 'Remote Logon'. You connection
    should be You should NOT be prompted for a password.
    f.) Repeat above to verify RFCs for other systems
    regards
    KP
    Edited by: KP on Dec 14, 2009 12:11 PM

  • Extraction, Flat File, Generic Data Source, Delta Initialization

    Extraction, Flat File, Generic Data Source, Delta Initialization
    I have couple of questions regarding data extraction.
    1.     If you have Data Source a Flat File e.g. Excel file I know that you have to create Data Source at BW side. How do you upload updates, by selecting Delta Update when executing next Data Load? Do you ever u201Cconvertu201D this Excel file into Application Tables to become SAP Source 
    2.     Can you please give me example of situation where you had to create Generic Data Source? What is difference between Time Stamp, Calend. Day and Numeric Pointer. Which one is most common to select?
    3.     I read somewhere that Generic Data Source does not have Setup Table. I thought that you have to have Setup Table in order to load transaction Data otherwise you will lock the Application Tables. Where am I going wrong im my thinking please?
    4.     What are steps in terms of IP before, under and after Delta Initialization. I belive that you can do two ways:
    Full Update - Initialize Delta Process (without Data Transfer) u2013 Delta Update  or
    Initialize Delta Process (with Data Transfer) u2013 Delta Update
    Am I right? What is most common method and why?
    5.     If you want to add a filed in Data Source after 6 month using it, you want to do it without re-init Delta Queue. You add field in RSA6, then provide info for ABAP to populate new filed (info u2013 name of Data Source, Extract Structure, field added, name of Application Table which contains the field). How does it work now as there is no SetUp table it has been deleted after Initialisation? How does Delta Queue know that it is going to receive data which has been  expanded by one field or it may does not need to know at all?
    THANKSSSSSSSSSs

    Hi,
    1. If you have Data Source a Flat File e.g. Excel file I know that you have to create Data Source at BW side. How do you upload updates, by selecting Delta Update when executing next Data Load? Do you ever u201Cconvertu201D this Excel file into Application Tables to become SAP Source
    Once you create Datasource for A flat file extraction then it is file source system specific hence you cont change to Application table source Data source
    In info package you can change the source as application server instead of desktop no need to change the DS
    2. Can you please give me example of situation where you had to create Generic Data Source? What is difference between Time Stamp, Calend. Day and Numeric Pointer. Which one is most common to select?
    When we don't find any standard extractor then we can go for Generic(if i want information sales along with finance information in a data source then generally we dont get standard one hence we can go for generic DS)
    Check the below link for More about generic DS .
    http://wiki.sdn.sap.com/wiki/display/BI/Generic+Extraction
    for Delta capturing you can use
    Timestamp(if the table has time stamp filed  so it can stamp the last changed record in that table hence it is easy to get delta based on the time stamp)
    Calday- (If the table doesn't have the Timestamp filed then search for Calday where you can stamp the delta based on the date when documents are changed )
    Numericpointer : If the table doesn't above both then we go for this option where you can the numeric value change stamp )
    3. I read somewhere that Generic Data Source does not have Setup Table. I thought that you have to have Setup Table in order to load transaction Data otherwise you will lock the Application Tables. Where am I going wrong im my thinking please?
    Generic datasource nothing but we extracting data directly from the database table without any interface between the application/systems
    4. What are steps in terms of IP before, under and after Delta Initialization. I belive that you can do two ways:
    Full Update - Initialize Delta Process (without Data Transfer) u2013 Delta Update or
    Initialize Delta Process (with Data Transfer) u2013 Delta Update
    Am I right? What is most common method and why?
    Correct
    5. If you want to add a filed in Data Source after 6 month using it, you want to do it without re-init Delta Queue. You add field in RSA6, then provide info for ABAP to populate new filed (info u2013 name of Data Source, Extract Structure, field added, name of Application Table which contains the field). How does it work now as there is no SetUp table it has been deleted after Initialisation? How does Delta Queue know that it is going to receive data which has been expanded by one field or it may does not need to know at all?
    Once you add the new field to structure(DS) you will get the data as on date onwards not historical data hence what is the concept of setup table  ( delta records come from the Delta Que not from the setup table )
    If you want histaric data to new field then you need to setp table deletion ...etc...
    Hope it is clear..
    Regards,
    Satya

  • Delta using generic data source

    Hi experts !
    How can i create a delta using generic data source ?  i am using BW 7.0.
    Thanks.

    Dear FABRICIO VAZ DE SOUZA  ,
    Generic extraction
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    step by step procedure for generic extraction delta
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Refer:
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Generic Extraction via Function Module
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    Hope it helps you,Revert me back if you have any queries
    Assign points if helpful
    Regards
    Bala

  • Error while extracting huge volumes of data from BW

    Hi,
    we see this error while extracting huge volumes of data (apprx 3.4 million and with more no.of columns) and we see this error.
    R3C-151001: |Dataflow DF_SAPSI_SAPSI3131_SAPBW_To_Teradata
    Error calling R/3 to get table data: <RFC Error:
    Key: TSV_TNEW_PAGE_ALLOC_FAILED
    Status: EXCEPTION SYSTEM_FAILURE RAISED
    No more storage space available for extending an internal table.
    >.
    We are not sure if DoP works with source as SAP BW, but when tried with DoP also, we got the same error.
    Will this issue be resolved with an R/3 or ABAP dataflow? Can anyone suggest some possible solutions for this scenario?
    Sri

    The problem is that you've reached the maximum memory configure for your system.
    If this is batch job reconfigure the profile parameter
    abap/heap_area_nondia
    Markus

  • HI,How can i set delta option for costumised Generic data source

    Hi Sir/Madam,
          How can i set delta option for costumised Generic data source.
    Regards,
    Vishali.R
    Please search the forum before posting a thread
    Edited by: Pravender on Aug 15, 2011 1:26 PM

    Hi,
    Go to RSO2 transaction and click on change then on the tool bar click on Generic Delta button. In the next popup you can set your delta.
    Regards,
    Durgesh.

  • How to set the delta for existing generic data source

    Hi BW Guru's
    I have a problem,actually i have a exsting generic data source"ZFRBHRCHY". Master data Object ZFRBHRCHY  is getting laoded from all some R/3 Clusters on a Daily Basis. It is full load and takes 4 to 5 Hours, but number of added records(2000) are very less,while total records are more(40Lks).For avoiding this larger load time every day,i want to implement delta extraction for this.
    How to implement this,(i want steps for this) .
    Thanks in advance,
    Regards
    reddy

    yeas agree with sanakar,
    this field which shankar is talking about must be entry date (if u delta timestamp is date, u will also have to mention this table field name in definition of delta), this means that this field will catch last change to the record, so that it will be delta enabled based on the latest change date. This is very important becuase if u use date like posting date to the delta then back dated posting will not captured in to the delta, as delta for this back date is already been done.
    Hope u understand this.

  • How to get Delta field while going for a generic data source

    Hi all,
    We want to create a generic data source for tables involving MSEG,MKPF,SER03,OBJK and EQU by creating a view on these tables.
    fields we are mapping are ...
    MKPF          MSEG         SER03        OBJK       EQUI
    MBLNR        MBLNR       MBLNR     
    MJAHR        MJAHR        MJAHR
                       ZEILE          ZEILE
                                          OBKNR        OBKNR
    Can  any help us out in finding/creating a delta specific field,so dat we do deltas in BW after initial initialisations?
    Thanks all,
    Doug

    HI
    Try to use some time characterstic.
    Generic data will support the following delta's.
    Time stamp
    Calender day
    Numeric Pointer(for exmple doccument number,counter etc)
    regards,
    Chandra.

  • Error in Using Generic Data Source

    Hi,
    I have created a generic data source which uses a function module and replicated in the same system for testing. Now when I try to create a infopackage and load data into PSA, I am getting a short dump. Please help me out as I am very new to this.

    Hi,
    in order to get some help you need to provide the information of the short dump as it can have multiple reasons. So please give us a more detailed error description.
    regards
    Siggi

  • Unable to load CSV data using APEX Data Load using Firefox/Safari on a MAC

    I have APEX installed on a Windows XP machine connected to an 11g database on the same Windows XP machine.
    While on the windows XP, using IE 7, I am able to successfully load a CSV spreadsheet of data using the APEX Data Load utility.
    However, if I switch to my MacBook Pro running OS X leopard, then login into same APEX machine using Firefox 2 or 3 or Safari 3, then try to upload CSV data, it fails on the "Table Properties" step when it asks you for the name of the new table and then asks you to set table properties, the table properties just never appear (they do appear in IE 7 on Windows XP) and if you try to hit the NEXT button, you get error message: "1 error has occurred. At least one column must be specified to include in new table." and of course, you can't specify the any of the columns because there is nothing under SET TABLE PROPERTIES in the interface.
    I also tried to load data with Firefox 2, Firefox 3 (beta), and Safari 3.1, but get same failed result on all three. If I return to the Windows XP machine and use IE 7.0, Data Load works just fine. I work in an ALL MAC environment, it was difficult to get a windows machine into my workplace, and all my end users will be using MACs. There is no current version of IE for the MAC, so I have to use Firefox or Safari.
    Is there some option in Firefox or Safari that I can turn on so this Data Load feature will work on the MAC?
    Thanks for your help. Any assistance appreciated.
    Tony

    I managed to get this to work by saving the CSV file as Windows CSV (not DOS CSV), which allowed the CSV data to be read by Oracle running on Windows XP. I think the problem had to do with different character sets being used for CSV on MAC versus CSV on Windows. Maybe if I had created my windows XP Oracle database with Unicode as the default character set, I never would have experienced this problem.

  • BW Master data delta generic data source for further update in BW

    Hi BWers,
    I am looking for an option to load delta from Master data to another master data within BW. Export data source option for master data only has full load option but no delta update possible.
    I tried creating generic data source delta enabled on view of master data (/BI/M). But the problem I am facing now is master data contains quantity field as attribute and this field refers another table RSDKYF for unit. To be able to create data source on view / table no field should refer field in another table.
    Did anybody create delta for master data for further loading within BW or came across similar issue with key figures, please let me know the best procedure in this scenario? Appreciate your quick response.
    Regards,
    Madhav

    In your master data attribute have a date field which will be filled by the R/3 load as sy-datum - then create an export datasource and in the infopackage - give a selectoion for the date field as sy-datum and sy-datum -1..
    Not exactly a delta but then usually master data is not kept as delta because the volumes are usually less - you can achieve delta by this method...

  • Loading DATA using this Data source 0RT_PA_TRAN_CONTROL_TR,2LIS_44_POSREC

    Hi gurus,
    I am trying to Load data using this 2 data sources, I loading for first time.
    Can any one guide me step by step how to load the data by using this two data Sources SAP BI.Below is the data sources names.
    *0RT_PA_TRAN_CONTROL_TR - BW Data Source
    *2LIS_44_POSREC - ECC Data Source

    Hi Lisa,
    @@ In this scenario , we are uploading data in PIPE and then pushing data to data source- info cubes. We are trying to upload sales data in PIPE using an internal function module /POSDW/CREATE_TRANSACTIONS_INT.Using the POS monitor (/POSDW/MON0) , we are able to view the data.
    w.r.t your above sentences I understood that you were almost having the same requirement as I do. So did you get the solution?? If yes, kindly share the procedure about how to load the Data into the PIPE.

  • View V/s Extract structure in generic data source!

    Hi,
    Is it mandatory that view and extract structure must contain same number of fields in generic extraction?
    can we enhance the extract structure with a field which is not existing in view?
    clarify me with exmaple
    Thanks,
    Ravi

    Thanks Diego!
    Actaully, the view which is used in the definition of the data source has four tables
    namely AFRU,CRHD,AUFK and AFKO.
    Join conditions are:
    AFRU     MANDT     =     CRHD     MANDT
    AFRU     ARBID     =     CRHD     OBJID
    AFRU     MANDT     =     AUFK     MANDT
    AFRU     AUFNR     =     AUFK     AUFNR
    AFRU     MANDT     =     AFKO     MANDT
    AFRU     AUFNR     =     AFKO     AUFNR
    Now, i want to know from which table is the field AUFNR is mapped to BW info object!
    As the field is in both tables AFRU and AUFK, i am confused of from which table the data is getting filled up to the BW info object!
    I need to make a documentation of of each info object of how is it getting filled up and from which table?
    Thanks,
    Ravi

  • Data flows are getting started but not completing successfully while extracting/loading of the data

    Hello People,
    We are facing a abnormal behavior with the dataflows in the data services job.
    Scenario:
    We are extracting the data from CRM end in parallel. Please refer the build:
    a. We have 5 main workflows flows i.e :
       => Main WF1 has 6 more sub Wf's in it, in which each sub Wf has 1/2 DF's associated in parallel.
       => Main WF2 has 21 DF's and 1 WFa->with a DF & a WFb. WFb has 1 DF in parallel.
       => Main WF3 has 1 DF in parallel.
       => Main WF4 has 3 DF in parallel.
       => Main WF5 has 1 WF & a DF in sequence.
    b. Regularly the job works perfectly fine but, sometimes it gets stuck at the DF’s without any error logs.
    c. Job doesn’t stuck at a specific dataflow or on a specific day, many a times it strucks at different DF’s.
    d. Observations in the Monitor Log:
    Dataflow---------------------- State----------------RowCnt------LT-------AT------ 
    +DF1/ZABAPDF
    PROCEED
    234000
    8.113      394.164
    /DF1/Query
    PROCEED
    234000
    8.159      394.242
    -DF1/Query_2
    PROCEED
    234000
    8.159      394.242
    Where LT: Lapse Time and AT: Absolute time
    If you check the monitor log, the State of the Dataflow DF1 remains PROCEED till the end, ideally it should complete.
    In successful jobs, the status for DF1  is STOP . This DF takes approx. 2 min to execute.
    The row count for DF1 extraction is 234204 but, it got stuck at  234000.
    Then we terminate the job after sometime,but for surprise it gets executed successfully on next day.
    e. As per analysis over all the failed jobs, same things were observed over the different data flows that got stuck during the execution.Logic related to the data flows is perfectly fine.
    Observations in the Trace log:
    DATAFLOW: Process to execute data flow <DF1> is started.
    DATAFLOW: Data flow <DF1> is started.
    ABAP: ABAP flow <ZABAPDF> is started.
    ABAP: ABAP flow <ZABAPDF> is completed.
    Cache statistics determined that data flow <DF1>
    uses <0>caches with a total size of <0> bytes. This is less than(or equal to) the virtual memory <1609564160> bytes available for caches.
    Statistics is switching the cache type to IN MEMORY.
    DATAFLOW: Data flow <DF1> using IN MEMORY Cache.
    DATAFLOW: <DF1> is completed successfully.
    The highlighted text in the trace log is not appearing in the unsuccessful job but, it appears for the successful one.
    Note: The cache type is pageable cache, DS ver is 3.2.
    Please suggest.
    Regards,
    Santosh

    Hi Santosh,
    just a wild guess.
    Would you be able to replicate all the DF\WF , delete original DF\WF, rename replicated objects to original to DF\WF names(for your convenience)   and excute it.
    Some time reference does not work.
    Hope this should work.
    Regards,
    Shiva Sahu

  • Code Page Problem while downloading to PC in DUF Format

    Hi,
    I have a problem where in i tried to download a XML Structure that has been built in using ABAP and then download the same as .duf file in PC Frontend. The file is then used to upload the details in some webportal.
    The Problem is, there is a text which contains a special character ' ī ' in Latvian format which while getting downloaded is changed as # (can be seen when opened using Notepad). I tried passing Codepage 1900 (checked from table TCP0C) to the function Module 'GUI_DOWNLOAD'. Now it changes the special character as ' ļ '.
    How do i overcome this problem with codepage or do i need to make any settings?
    Any help on this will be greatly appreciated. Let me know incase of further explanations or details are required.
    Thanks,
    Prashanth

    hi
    check whether the character is set to the unicode with reference to the language key

Maybe you are looking for