Code to reconsile the accounts on OIM

write a program to mass creating resource objects for ABC account and ABC responsibility
The ABC resource objects have been implemented on OIM. A few hundreds of ABC accounts and ABC responsibilities are mass created in ABC. Then, the ABC team provides OIM team those mass created ABC account and ABC responsibilities information in spreadsheet. Please assess the effect to write a program to create ABC account objects and ABC responsibilities objects for the users listed in the spreadsheet in OIM. Please bear in mind ‘NO’ actual provisioning is required. The purpose is only to get both OIM & ABC in-sync.
Sample ABC account file
employee#, last_name, first_name, primary position
Sample ABC responsibility file
employee#, responsibility_name
This is the requirement given to us..
Can someone help what needs to be done for this.
we just need to write a java code???
and approximately how much time effort this task will take???
Thanks & regards,
Edited by: user12195469 on Nov 30, 2009 4:49 AM

HI.
I need help again.
now here are soem queries I asked:
Are we going to get the user information in spreadsheet in future for synchronization, If user are created directly on ABC?
     CY>> Only ABC specific information will be provided in the spreadsheet for e.g. the primary position, position type, responsibility. The user specific information for e.g. Business unit, telephone number, first name, last name..and etc. can be obtained from user table in OIM.
If users are already created, can’t we pick the user information directly from LDAP using connector?
     CY>> The user information loaded from LDAP to OIM 4 times in a day. Thus, you can get the user information directly from OIM.
As the OIM GTC doesn’t provide feature to read the spreadsheet so are we suppose to develop the custom connector.
     CY>> During the previous implementation, custom script was written to read from text file.
Can we get the account and responsibility file in any other format(.csv /.txt)?
     CY>> What format that you propose?
what I got from these is that users alreadu exists in OIM also ad reconcilations is done from LDAP.
now I am confused what exactly I need to do as I got from requirement wa sthat I need to create users in OIM and then assign resource to them.
Please please please help!!!! urgent
else I will be shot.
Edited by: user12195469 on Dec 11, 2009 12:08 AM

Similar Messages

  • How do I rent a movie using money in my iTunes account.  I had to enter at the iTunes gift card code to open the account, but now I can't figure out how to use this money to rent a movie; I opened the account several months ago but never used the money.

    How do I rent a move using moneyin my iTunes account.  I had to enter the iTunes gift ard code to open the account several months ago, but never purchased anything with it.  When I entered this code to rent a movie, the response was that it was redeemed.  What am I doing wrong?

    If you've already redeemed the card onto your account then its amount should be on your account - a card can only be redeemed once.
    To rent a film, find the film in the store and (if the film studio has made it available as a rental in your country) click on its Rent button. If you are beig prompted to review your account and enter credit card details then see if this post from mountaingoatgirl lets you do so without entering card details : https://discussions.apple.com/message/24303054 . If that doesn't work then you should be able to remove your card's details after entering them.
    As long as you account's balance covers the rental cost then only that should be charged. How purchases are billed : http://support.apple.com/kb/HT5582
    When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance.

  • How to lock the AD Account through OIM

    Hi.
    I am provisioning AD through OIM 11g using the AD Connector. I have done the create user, modified user provisioning through OIM in AD successfully without any issue.
    I would like to lock the OIM account and also lock the respective target accounts when OIM account is locked.
    I have done the following task to lock the account in OIM and also in AD through OIM. They are
    Process Definition Task
    I have created the Change Account Status task in process definition.
    This task will populate the OIM Account lock status value to the AD Account is Locked out field in the ADUSER form using the OIM API. The same API is working for all First Name, Last Name etc modification without any issue.
    Lookup Definition
    I have added the following entry in the Lookup.USR_PROCESS_TRIGGERS Lookup Definition
    Code Key : USR_LOCKED and Decode : Change Account Status
    OIM Admin Console
    I have logged into the OIM admin Console as a Administrator and I have search the user and click the Lock Account button. The OIM Account is locked , but target resource account was not locked and also Change Account Status task was not triggered by OIM.
    Do i need to do any special configuration for account lock for the target resource.
    Help is greatly appreciated.

    In your System Configuration variables, find the value for "XLUserResource.ProvisionMode". Make sure this is set to Java and not DB.
    >
    This property determines whether provisioning of the Xellerate User resource to the user's organization occurs in the database layer through stored procedure, or in the Java layer via Event Handlers.
    Note: See Oracle Fusion Middleware Developer's Guide for Oracle Identity Manager for information about Event Handlers.
    This property has the following allowed values:
    DB: Provisioning of the Xellerate User resource to the user's organization occurs in the database layer through stored procedure. This in turn does not trigger any further process. Therefore, custom tasks associated with the Xellerate User provisioning process that is associated with the Xellerate User resource does take place.
    Java: Provisioning of the Xellerate User resource to the user's organization occurs in the database layer via Event Handlers. Custom tasks associated with the Xellerate User provisioning process that is associated with the Xellerate User resource takes place. This is applicable to the upgrade scenario, where you have your own tasks associated with provisioning processes in earlier releases of Oracle Identity Manager, and you want them to run even after 11g upgrade. In such scenario, set the value of this property value to JAVA.
    >
    -Kevin

  • I went to create a itunes account and entered the wrong e-mail in and my ITunes confirmation code was sent to that e-mail. The person who recieved the e-mail shouldnt be able to keep it due to they dont know the password i made for the account correct?

    I went to set up an ITunes account and entered the WRONG e-mail. After everything was complete it sent the Itunes conformation number to the wrong e-mail. I dont believe they can use it because they dont know the password it will ask them for that e-mail for the account. How do i redeem the itunes back? When i enetr the code to try and use it for my correct e-mail it says it already has been redeemed.

    Go to https://expresslane.apple.com ; select 'iTunes' in the first column; 'iTunes Store' in the second column then see if there is an appropriate place to report the problem.

  • RE: Typekit...how do I move the code from an old account to my new account under the Creative Cloud?

    RE: Typekit...how do I move the code from an old account to my new account under the Creative Cloud? W/out (preferably) interuption to the website in question? Thanks!

    Hi Jesse,
    Please email us at [email protected] with:
    - your current Typekit account email address
    - the email address you use for Creative Cloud
    We will be able to help you make this change without disrupting your current font serving. 
    Thank you,
    -- liz

  • Why won't the iTunes gift card I caught by email allow me to put in the code for my iTunes account?

    I recieved a gift card for my birthday by email, and I tried to put in the code on my itunes account, and it says that it is not a valid code. When I check the balance of the card, it still says it has the amount on it. What do I do to resolve this issue?

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • What is the T.Code to clear gl accounts in a mass manually?

    Hello Experts,
    is there any T.code to clear the GL accounts in mass manually?
    Because F-03 is for single gl account and F.13 is for automatic clearing purpose where clearing Criterion is maintained before in OB74.
    The scenario is like:
    I have more than 100 gl accounts and every gl account have a lot of line items and if i go for F-03 for manual clearing then it will be time consuming and i cannot go for F.13 because Assignments fields are not maintained properly to those gl accounts.
    So is there any solution for my requirement?
    Regards,
    Sumeys Offrin

    Hi
    I was faced with more or less like your situtation during New GL migration where in we had almost 1250000000 Open Items in almost 200 GL Accounts. We identified the nature of postings in the GL Accounts, for eg, Tax Offsetting Posting. We than created one GL Account, for posting a summy posting and using T Code F-07, transferred the balance to this GL Account and posted back the balance to the original GL Account as a single line. While posting the first entry we cleared the open item.
    This is a one time solution and the user has to clear the open items regularly.
    Regards
    Sanil Bhandari

  • I opened a Sync account before, and without saving the code I uninstalled it. But now using installed it again but do not have my Sync code to add the device. Is there anyway I can retrieve the code, without creating another account? Thanks!

    I created a Sync account before but uninstalled it without saving the code. But now installed it again and having trouble finding my account code to setup my Sync. Is there a way to retrieve my Sync code without creating another account?
    Thanks!

    Contact iTunes:
    Apple - Support - iTunes - Contact Us

  • I cannot complete the registration of the ******* account. I write there my card number, security code, etc.

    I cannot complete the registration of the ******* account. I write there my card number, security code, etc. All i see is: "please contact itunes suport to complete this transaction". What's up????

    http://support.apple.com/kb/HT1277
    http://support.apple.com/kb/HT5312
    http://support.apple.com/kb/HT6030
    These all should help.
    good Luck
    Don

  • TS1292 Dear support Apple! A week ago I moved to Spain and bought 2 Gift Card in the amount of 15euro. When I entered the code App Store displays a message that you need to change the country but I was left with 10 cents in the account that you can not po

    Dear support Apple! A week ago I moved to Spain and bought 2 Gift Card for 15euro. When I entered the code App Store displays a message that you need to change the country but I was left with 10 cents in the account that not possible to spendt. Please delete this 10 cents from my account

    Please be aware that you are not communicating with Apple when you post in these forums. The only people who will reply to your posts are your fellow users. You need to go here:
    iTunes Support
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • How can i restore the account code for Hotspot shield?

    I bought the Hotspot shield vpn from iTunes to use it on my iPhone using my credit card . i cant find the email sent to me when i did the purchase, so i dont have the account number to activate my version. also i cant see the settings for application in iphone. how can i restore the account code for Hotspot shield?

    Try this:
    https://www.hsselite.com/support.php#section17
    Regards.

  • Getting Error While accessing Accounts from oim

    Hi All,
    I am getting an exception while accessing user accounts from oim through the jdeveloper(I m giving UserId as input)
    Exception:
    avax.ejb.EJBAccessException: [EJB:010160]Security Violation: User: '<anonymous>' has insufficient permission to access EJB: type=<ejb>, application=oim#11.1.2.0.0, module=iam-ejb.jar, ejb=ProvisioningService, method=getAccountsProvisionedToUserx, methodInterface=Remote, signature={java.lang.String,java.lang.String}.
         at weblogic.ejb.container.internal.MethodDescriptor.checkMethodPermissionsBusiness(MethodDescriptor.java:581)
         at weblogic.ejb.container.internal.BaseRemoteObject.checkMethodPermissions(BaseRemoteObject.java:111)
         at weblogic.ejb.container.internal.BaseRemoteObject.preInvoke(BaseRemoteObject.java:274)
         at weblogic.ejb.container.internal.StatelessRemoteObject.__WL_preInvoke(StatelessRemoteObject.java:41)
         at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:24)
         at oracle.iam.provisioning.api.ProvisioningService_p7m7x_ProvisioningServiceRemoteImpl.getAccountsProvisionedToUserx(Unknown Source)
         at oracle.iam.provisioning.api.ProvisioningService_p7m7x_ProvisioningServiceRemoteImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
         at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
         at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
         at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Process exited with exit code 0.

    Which user are you using for creating connection with OIM ?
    Which method are you using to create connection with OIM ?
    Re: OIMClient login throwing AuthenticationException execption (FOR R2)

  • Create Group Email Account in OIM

    Hi,
    I have a requirement to create Group Email Account in AD from OIM. I am able to create Group Accounts in AD using the OOB Resource Object "AD Group". Though I am not sure how to mail enable the group Account from OIM. Please give me ur valuable suggestions.
    Regards,
    Srijan.

    What you basically need to do is to set the mailnickname attribute on the group object in AD.
    I don't think that you can get the 9.1 AD connector to do this but it is not that hard to create a custom connector to do this.
    If you don't have experience of JNDI I could change some code I built a while ago to do this. Contact me through LinkedIn if you are interested.
    Best regards
    /Martin

  • Reconciliation: Manually link not matched accounts to OIM users

    Hi all,
    Is it possible to manually link a reconciled account to a OIM user?
    When reconciliation process is finished, in the reconciliation manager there are a few accounts that are not matched (to OIM users). This is beacuse they are "service accounts" or resource "administrative accounts", and the user ID of the reconciled account is not equal to any existing OIM user (xellerate users).
    In that case, we want to manually link those accounts to an administrator (OIM users). So, when listing the resource profile of that user, those accounts are showed as provisioned.
    By now, we are trying to achieve that, only that, not any service account behaviour (that will be the next goal).
    Regards.
    Edited by: user643044 on Feb 3, 2009 9:12 AM

    Thank you.
    We have solved it in the following way:
    1.- RO: create a "dummy" recon field.
    2.- Recon Connector (java code): create a field (uid_to_map), but not added to the hashmap. So, this field is added to the reconciliation event as "unprocessed".
    3.- Create a Recon Rule, to map OIM "User Id" -> RO "dummy"
    4.- Perform reconciliation.
    5.- Edit the reconciliation event. Edit the unprocessed field "uid_to_map", linking it with "dummy" recon field, and introducing the OIM user ID of the OIM user we want to link to.
    6.- Re-apply the matching rule.
    So, the account is linked to the user.
    Maybe it could help somebody who needs the same functionality.

  • HT204266 How come my credit card says invalid security code when I put my code in at the App Store?

    How come my credit card says invalid security code when I put my code in at the App Store? I have a bunch of free apps when I had my ipad 1 now I have 2 and my credit card will not be read as authentic Watson ever I tried my girls card nothing do I need to have money on it for a free download? I even bought a couple of games but why with so many free ones? Please help me I'm slow so walkit through with me thnx also my ipad 2 is brand new out da box and I accidentally updated to 6.0 without finding out first about it so some pointers to it would help ...which I think that it has something to do with it.

    Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
    If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
    And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
    For iOS I would expect an updated version of the manual to appear here at some point : http://support.apple.com/manuals/ipad/
    In the meantime there is this : http://www.apple.com/ios/whats-new/

Maybe you are looking for

  • ITunes will not download and install

    When I try to download itunes it goes right to the "Thank You" page and no download starts. I have disabled my security software and pop-up blocker is off. Any help would be greatly appreciated!!

  • Can't configure Airport Express after firmware upgrade 6.2.

    I have an Airport Extreme (V5.6) and I recently upgraded my Aiport Express to firmware 6.2. I was using the Express to extend my range and attach to my stereo for iTunes. I went out of town and took the Airport Express with me to use in my hotel room

  • Eliminate Family member that was created by mistake

    Hi, I need to eliminate a member that my family group. The problem, is that, this member is less than 13 years old. This member was created by me, but I was doing a test. Now, I don´t remember the password and I can´t eliminate because the user is a

  • WINDOWS 2008 R2 WITH WINDOWS 8 WALLPAPER USING GPO NOT WORKING

    I have come across a really annoying problem with Active Desktop Wallpaper GPO on Windows 8 It is set to redirect to a wallpaper which is located in a dir on the server. when the user first logs onto a windows 8 PC, the correct background is applied.

  • GNOME3 is not working well after install the nvidia driver

    I changed my graphic device from intel (integrated in i5 sandy bridge) to nvidia (GTX550 Ti). When I reboot my PC, an error about GNOME failed something was showned. I ignored it and installed nvidia package using pacman. After that, I installed new