COGI error with SLED reason.

Hi  Dudes,
i am getting a error in COGI that "Short fall of 194 days against SLED with current item" for GRN agianst masterial. in the material master of header material period indicator'D', minimum rem. shelf life '0', Total Shelf life '0'. 
Thanks in advance
Robert.

Dear,
Shelf life Expiration Date SLED takes from the material master record in Plant data/stor1 view.
Minimum shelf life a material must have available to be accepted by the system Maintain it and check.
Or change indictor form period indicator'D' to M,
As you have actived shelf life expiration date in the Transaction: OMJ5 or OMJE
For further details follow the below link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a7/e58464dd9511d185170000e82013e8/content.htm
Regards,
R.Brahmankar

Similar Messages

  • COGI error in relevance in production order goods movement

    Hello,
    Yesterday I have a COGI error with regards in reservation. "RE Quantity moved exceeded by 7,912 LB: 1000710  0111  0001  201200". But today someone done something on the production order, and the error yesterday in COGI are fixed. Am confused what happen or what they did to fixed this since yesterday the error still there but now it is gone.
    when checking the Documented Goods Movement for material 1000710 in the production order here the details,
    Goods MVt   Mat. Doc  Mvt type Batch      Qty   Reservation
    1                       4908430     261     201199    6000  1112345
    1                       4908426     261     201198   14000  1112345
    1                       4908437     262     201200   14000  1112345
    2                       4908430     261     201200   14000 
    This is what it shows? could some one explain me with this data what was the reseason yesterday i did not fixed the COGI error while now it was fixed? and why in RESERVATION 1112345 it only shows qty 6000 not 14000 for this order?
    Hope for your kind and urgent reply to this issue
    Thanks
    JJ
    Edited by: John Jay Palisoc on Jul 24, 2008 5:02 AM

    Hi JJ,
    well, as far as I can see, there is an unplanned 261 (without reservation no.). This one (doc. 4908430) has wihtdrawn additional 14000 for batch 201200. Therefore, the later 262 posting (doc. 4908437) with 14000 for that batch could be put into store without error.
    That's all
    Regarding the reservation: It shows qty 6000 because as first step 14000 were withdrawn, then additional 6000 and then 14000 were put back. So 6000 remain.
    Regards, Andreas
    Edited by: Andreas Seibel  on Jul 24, 2008 3:37 PM
    Edited by: Andreas Seibel  on Jul 24, 2008 3:40 PM
    Edited by: Andreas Seibel  on Jul 24, 2008 3:45 PM

  • Currently cannot burn a dvd or cd post install of snow leopard. Various errors to some times just ejecting the disk with no reason. System was fine prior to upgrading to snow leopard.

    Currently cannot burn a dvd or cd post install of snow leopard. Various errors to some times just ejecting the disk with no reason. System was fine prior to upgrading to snow leopard.

    MATSHITA DVD-R UJ-857E:
    Firmware Revision: ZA0E
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: To show the available burn speeds, insert a disc and choose View > Refresh

  • TECO in COHVPI for orders with COGI errors

    Hi Gurus,
    We would like process TECO for process orders using COHVPI (possibly in the background) while some of the orders may have COGI errors and thus messages are displayed for each order. Is there a way to bypass these messages as default, causing the the errors to remain in COGI.
    TIA
    M2202

    Hi,
    You can delete the errors in COGI & then do TECO in background mode in COHVPI transaction
    Regards,
    Senthilkumar

  • Cogi error - Pipeline/consignment movement posted without value

    Hi
    I am getting a Cogi error Pipeline/consignment movement posted without value
    This particular material was not having problem till last week and now all the time when confirmation of production order happens it goes to cogi with error
    Price is maintained in info record
    Please suggest

    Dear friend,
    some theory:
    You always have 2 options - delete or process your COGI record.
    Before to make a decision you need to analyse/find a reason why this error has happened.
    run COGI;
    tick your eror;
    hit F6 (display errors) - bell icon
    now you are able to see the reason.
    depends on a reason (information you see now) you do your next steps
    say, for instance, you did something to fix the reason,...
    then
    if you want to process, tick your error and Save
    if everything is okay - system will POST it (cogi record will go away)
    or , say, you do not care about the error -
    tick your error and Delete
    some practice:
    please have a look at your material - probably someone changed it very recently - look at last changes using MM04 or MM03
    good luck

  • COGI Error - RE Reserved quant. exceeded

    Hi All,
    First of All "Wish You A Happy New Year"
    I got a issue with high priority in COGI transaction with Error Text " RE Reserved quant. exceeded by 4,071.456 KG : CPXXXBRT 1000 R100"
    Application Area M7 & Message Number 362.
    The material is a raw material. I have verified the production order and found, the Requirement Qty for this raw material is 144,275.00, Committed quantity is 29,941.876 & the Withdrawl Qty is 147,667.284
    I am new to this error issue in COGI. Can any one guide me what to do now and how to solve this issue quickly?
    Thanks & Regards,
    Phani Kumar

    " RE Reserved quant. exceeded by 4,071.456 KG : CPXXXBRT 1000 R100"
    since the material is activated as a Backflush,  when the try to post extra  qty compare to requirement qty for that reason, Goods movement is failed  and log is created in COGi.
    IF they client  want the above qty issue against Planned consumption.
    then they need to increase the requirement qty in CO02 by 4071.456, so that the reservation qty will equal as posting
    IF they client  want the above qty issue against unplanned consumption.
    Then They can delete the COGI error and post the Goods issue in MB1A, with out entering order in initial screen and the add the order in MB1A and post the raw material

  • Plug-in errors and dependency errors with a CAF app in DS in NW CE 7.1

    I am learining to build CAF apps in Developer Studio in NW CE 7.1.  Here are my steps and the errors I am getting:
    Open Developer Studio
    Switch to the CA perspective
    File->New->Project
    Choose Development Component under Development Infrastructure
    Press Next
    Choose Composite Application under sap.com
    Choose MyComponents[demo.sap.com] under 'Local Development'
    Vendor: demo.sap.com
    Name: carpool
    Caption: Car Pool
    Language: American English
    Domain: SAP-xApps
    Support Component: CAF-APP (typed in, not chosen)
    Press Finish
    The following error appears:
    Status ERROR
    Plugin : com.sap.ide.metamodel.core.services.eclipse
    code=0
    Internal error
       Plugin name: Metamodel Core
       Internal error  : com.sap.ide.metamodel.core.services.eclipse
       Class      : com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker
       Method     : computeIdeJarProperties
       Message    : C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
       Exception  : java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
    java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
    at java.util.zip.ZipFile.open(Native Method)
    at java.util.zip.ZipFile.<init>(ZipFile.java:203)
    at java.util.jar.JarFile.<init>(JarFile.java:132)
    at java.util.jar.JarFile.<init>(JarFile.java:70)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.computeIdeJarProperties(ArchiveVersionChecker.java:296)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.doFullCheck(ArchiveVersionChecker.java:214)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.checkProject(ArchiveVersionChecker.java:125)
    at com.sap.ide.mmservices.core.eclipse.generation.GenerationServiceEclipse.checkArchiveVersions(GenerationServiceEclipse.java:110)
    at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.checkArchiveVersions(GenerationBuilder.java:335)
    at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:85)
    at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:624)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:166)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:197)
    at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:246)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
    at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:302)
    at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:334)
    at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:137)
    at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:235)
    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    I do not think I missed anything installing NW CE 7.1, but this error makes me think that some plug-in was erroneously left out of the install. 
    Incidentally, I can continue onward and build an app (this is obviously a tutorial), but when I try to deploy I get the following error:
    The deployment of the archive failed with an exception!
    ([ERROR CODE DPL.DCAPI.1027]) DependenciesResolvingException.
    Reason:[ERROR CODE DPL.DC.3033] An unresolved dependencies error
    occurred while sorting the deployment batch items regarding the
    dependencies.;nested exception is:
    com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDepen
    denciesException:[ERROR CODE DPL.DC.3437]Unresolved dependencies
    found for the following deployment items:
    1. Component: name:'carpool~ear',vendor:'my.company',location:
    'localDevelopment',version:'20080501110329',software type: 'J2EE',
    dependencies:'[name:'cafruntimeear',vendor:'sap.com',name:
    'cafcoreear',vendor:'sap.com']
    Unresolved dependency:
    name:'cafruntimeear',vendor:'sap.com'          (not found in the admitted
    batch items and the repository)
    Unresolved dependency:
    name:'cafcoreear',vendor:'sap.com'          (not found in the admitted
    batch items and the repository)
    Please check the error log for further informations.
    Again, this looks like I am missing some components.
    Any assistance is greatly appreciated.
    TB

    Further developments:  As you may note from the error message, DS is looking for com.sap.ide.metamodel.core.services.eclipse in both the C: and the E: drive at the same time.  In fact, this file exists in the E: drive subdirectory listed, so I obviously have an error with two drive designations being concatenated.  Does anyone know how I can change the lookup directory for this dependency (or any dependency)? 
    Thanks,
    TB

  • Error With Export/Print from Crystal Report Viewer

    Hello there,
    I've searched through the web and SAP discussion boards with not much luck with this issue.
    After working through this for some days now I've decided to look here for help.
    Environment:
    I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
    I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
    Problem:
    When I attempt to export, I receive the prompt to select format and pages.
    When I click export after selections most times I receive an error with the text
    Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
    Other times the page simply refreshes on export.
    When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
    No Print or Export document is ever created.
    As many print/export issues seems to be related, I'm guessing this two issues are as well.
    Notes:
    I am utilizing the ReportClientDocument model
    I am storing this in session to use as the crystal report viewer report source on postbacks
    I am assigning a subset of export formats to the crystal report viewer
    I am setting particular parameters as well on the report source
    At this point I would appreciate every assistance I may receive on this issue
    Thanks in advance,
    Below is the pertinent code
    Code:
    <aspx>
       <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
       AutoDataBind="true" EnableDatabaseLogonPrompt="False"
       BestFitPage="False" ReuseParameterValuesOnRefresh="True"
      CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
      ToolPanelView="None" PrintMode="Pdf"/>
    <Codebehind>
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Web;
    using System.Web.UI;
    using System.Web.UI.WebControls;
    using CrystalDecisions.Enterprise;
    using CrystalDecisions.ReportAppServer.ClientDoc;
    using CrystalDecisions.ReportAppServer.CommonObjectModel;
    using CrystalDecisions.ReportAppServer.Controllers;
    using CrystalDecisions.ReportAppServer.DataDefModel;
    using CrystalDecisions.ReportAppServer.ReportDefModel;
    using CrystalDecisions.Shared;
    namespace ClassicInternalReportPage
        public partial class Reports : System.Web.UI.Page
            protected override void OnInit(EventArgs e)
                base.OnInit(e);
                if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
                    SessionMgr sessionMgr = new SessionMgr();
                    EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
                    EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
                    InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
                    if (reportService != null)
                        string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
                           + "Where SI_PROGID='CrystalEnterprise.Report' "
                           + "And SI_ID = {0} "
                           + "And SI_INSTANCE = 0", Request.QueryString["rId"]);
                        InfoObjects infoObjects = infoStore.Query(queryString);
                        ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
                        if (infoObjects != null && infoObjects.Count > 0)
                            ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
                            Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
                            CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                            CrystalReportViewer1.DataBind();
                //Viewer options
                // Don't enable prompting for Live and Custom
                CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
                CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
                CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
            protected void Page_Load(object sender, EventArgs e)
                if (IsPostBack && CrystalReportViewer1.ReportSource == null)
                    CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                    CrystalReportViewer1.DataBind();
            private bool AssignReportParameters(ISCDReportClientDocument reportSource)
                bool success = true;
                if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
                    if (Request.QueryString["t"] == "2")
                        reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
                        reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
                else if (Request.QueryString["t"] == "3")
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
                else
                    //Unknown report type alert
                    success = false;
                return success;

    Thanks Don for your response,
    I'm new to the SCN spaces and my content has been moved a couple of times already.
    In response to your questions
    The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
    My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
    If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
    Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
    Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
    App pool is running in 32 bit mode
    Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
    It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
    Thank you for your patience and advice,

  • Errors with Time Machine (not completing backup, and needing to erase the ".inProgress" package)

    I have in a previous discussion been talking about errors with my Time Machine backup.  The errors were with a problem with Indexing a file, it fails and stops the whole backup.  Each time it attemps another backup, it fills my ".inProgress" package with a (nearly) whole backup, filling my Time Machine hard drive, and thus errasing my previous good backups.  The error occurs after about 95% completion.
    In my last post of a similar disscussion, the problem was indexing the Preference Pane files and this caused the whole backup to fail.  This was my last post there:  (below in some additional info of my situation)
    I did exclude the MobileMe.prefPane.  And I got:
    12/16/11 9:24:50.468 PM com.apple.backupd: Starting standard backup
    12/16/11 9:24:50.556 PM com.apple.backupd: Backing up to: /Volumes/3 TB GoFlex Drive/Backups.backupdb
    12/16/11 9:25:14.418 PM com.apple.backupd: Waiting for index to be ready (101)
    12/16/11 9:27:02.366 PM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|
    12/16/11 9:27:02.366 PM com.apple.backupd: Finished scan
    12/16/11 9:33:37.119 PM com.apple.backupd: Deep event scan at path:/Volumes/Mac OS Lion GM reason:must scan subdirs|
    12/16/11 9:33:37.119 PM com.apple.backupd: Finished scan
    12/16/11 9:36:15.650 PM com.apple.backupd: 758.92 GB required (including padding), 830.32 GB available
    12/16/11 10:25:14.873 PM com.apple.backupd: Copied 22.8 GB of 630.5 GB, 782749 of 2357620 items
    12/16/11 11:25:15.335 PM com.apple.backupd: Copied 86.6 GB of 630.5 GB, 1167675 of 2357620 items
    12/17/11 12:25:16.227 AM com.apple.backupd: Copied 152.2 GB of 630.5 GB, 1393795 of 2357620 items
    Dec 17 01:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 305.2 GB of 630.5 GB, 1413946 of 2357620 items
    Dec 17 02:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 457.1 GB of 630.5 GB, 1419190 of 2357620 items
    Dec 17 03:19:07 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 1736865 files (568.3 GB) from volume Macintosh HD.
    Dec 17 03:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 572.1 GB of 630.5 GB, 1848939 of 2357620 items
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Indexing a file failed. Returned 200 for: /Volumes/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane, /Volumes/3 TB GoFlex Drive/Backups.backupdb/Tom iMac/2011-12-14-171406.inProgress/7DB524DD-EFB9-42A6-8A21-0A2A312EDA6D/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Aborting backup because indexing a file failed.
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Stopping backup.
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 2164998 files (581.1 GB) from volume Mac OS Lion GM.
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copy stage failed with error:11
    Dec 17 03:40:50 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Backup failed with error: 11
    This time it was the Mouse.prefPane that caused the error.  I'd like to exclude the entire PreferencePanes directory.
    This was my error message this time:
    I just realized this was on my small Developers partition.  Perhaps there is an error with the build, OR an error with the initial restore.  I'd like to perhaps exclude the entire /Volumes/Mac OS Lion GM.  I expect that Time Machine is working fine with my main partition and the error happens when it's almost done with the Mac OS Lion GM partition.
    The problem now is that I only have 265 GB of 3 TB available on my Time Machine HDD.  If attempt another backup, it'll surely erase about 410 GB of my past saved backups.  I've already lost 6 months, and I only have two months left of backups.  I need to erase the ".inProgress" package again.  That'll take time, and it's impossible to do from this main partition, even at root access.  This ".inProgress" has a total of two (nearly) full backups; it didn't cleanup the first full backup attempt while starting the second,perhaps it would have had it finished.  But I fear even if I exclude the whole "Mac OS Lion GM" partition,  It'll create a third full backup before cleanup and erase ~400 GB of previous good backups.  Then, I'll have a total of 4 (nearly) full backups!  3 TB is just enough without any past backups.
    Maybe I'll just copy my documentations of my 'errasing the ".inProgress" package'  last time (from the Mac OS Lion GM partition) and do a full restore of just that partition.  Thus erasing the errors all together.  If it doesn't fix the errors then this could be a bug in the build that doesn't allow Time Machine to work.  I've always included this partition in Time Machine before, even with other Lion builds, so I suspect that it was an error in the initial restore.  (I may be answering my own questions, and that the inital restore (of the small partition) is the problem, and I just need to re-restore the small partition)
    Again, I'm going to have to erase the ".inProgress" file to regain 1.53 TB of space before proceeding.
    Also, I gave myself permission to read the ".Backup.345781513.887697.log", the log that was created last night when I first started Time Machine this last time.  It was interesting, but didn't show the error I could see from the console.
    Right now, mds and mdworker appear to be going crazy even after I just now turned off Time Machine.  I think I'll let it go for the rest of the night.  Then I'll work on erasing the ".inProgress" package from the other partition boot up.
    That was my entire last post.  To add some information, I have two OS X partitons, both Mac OS X Lion.  One is my large main partition, the other is one I don't mind testing with.  I recently replaced my internal hard drive in my iMac and restored from Time Machine both partitions.  This appeared to go smoothly.  But I have yet to create a single successful Time Machine backup since.  At first it was doing a Full Backup, which I didn't like, but now it just aborts around 95% completion.  Each, time, it tries it fills the Time Machine hard drive with duplicate (nearly) full backups errasing my older good backups.  I would like to erase the ".inProgress" file to save space.
    My main question in this new discussion is does anyone know of a good way of erasing the ".inProgress" file? This is so I can preseerve my previous backups.  ACLs and other permissions seem to make it impossible to erase from this startup partition, the one I'm running Time Machine from.  Even at root level, if I give myself permission to change permissions or delete a file, it'll say Operation not Permitted instead of Permission Denied.  I have been able to delete this ".inProgress" package before when booting from the other  partition, but with great difficulty.  I have had much help from another Member in this Support Community when it comes to solving my Time Machine problems.  I think I have found the problem (indexing files in my small OS X partition), as stated in my copy& pasted post above, but I really need to delete this inProgress package first to save space before continuing!

    Pondini wrote:
    Gator TPK wrote:
    Now I'll have to fix the small partition?  How's the best way to do this?  There could be thousands of files that won't index fine.
    See if there's anything you haven't done, that applies, in the pink box of #C3 in Time Machine - Troubleshooting
    Otherwise, since most (or all?) of the indexing errors are in OSX, you might want to just reinstall it.  Something may have gone wrong sometime, that damaged those files.
    I reviewed #C3 in Time Machine - Troubleshooting and I have already done most of those things.  I have just learned something new though:
    When I included my Main OS X partition again, I got an indexing error for the first time for that partition.  I might be interesting to note that the _spotlight process was running, and it's running again (the magnifying glass has a dot and it generically says "Indexing Tom's iMac").  mdworker, mds and backupd processes really are working hard, one moment they used over 500% of my CPU.  It's nice to know for once quad core is good for something other than video encoding.  (Now if they could just get the Finder to do more than 100.1%, only 1 thread is doing 100%, I'd like to see file size calculations 8 times quicker!)
    I never got an indexing error once in the past 2 weeks for that large Mac OS X v10.7.2 main volume, and it had appeared to finish that partition backup before running into problems with my smaller test partition.  Also, I had just updated the smaller test partition with a later build of Mac OS X.  But It appears that the beta builds are clearly not the problem.  I thought I could just restore again (from the December 4th backup) the small partition and both would be fine.
    I'll finish reviewing all the suggestions on Time Machine - Troubleshooting and go from there.  Hopefully, the _spotlight indexing simutaniously was the only problem.  It's strange that the indexing hasn't happened since the original restore last week untill I finally got a good clean complete partial Time Machine backup.  Why would the first Time Machine backup trigger indexing again?
    For now, I'm going to exclude the Main Partition again, and let another good backup run.  And try your suggestions.  (And wait till mds, mdworker, etc. to finish!)
    I have the logs of the first two sucsessful backups and the last two failed backups from the last 3 hours, if that would help.?

  • COGI error generated while collective order confirmation

    hi ALL, this is the real  task for all PP GURUS.
    the issue is related with collective order confirmation.
    client is using customised program ZPP_CONF to confirm the collective order which is based on the sap spro program CORUPROC.this include automatic goods receipt,backflush & actual cost update .as user use zpp_conf for confirmation all this actions happened in backgruond.
    now after using ZPP_CONF . the confirmation is not happening .instead of that it is going in COGI where they are getting a error massage which is as follows
    "You have no authorization for this transaction with movement type 101u201D
    this error continues for 10-15 minutes after doing refresh it goes. & confirmation happens.
    this is not happening for all orders but for 8 out of 10.
    users have proper authorisations.
    they have enough stocks in st. locn.
    they are loosing lot of time becuse of this.
    HOW CAN I RECTIFY THIS ERROR GURUS?
    when i search i found this is written in the CORUPROC documentation
    Incl. incorrect goods movement: Not only preselected but also incorrect goods movements that are usually processed with transaction COGI are  selected and processed. 
    VENKADESH

    Hi,
    The Program CORUPROC only can adjust the Errors in Goods movements. It can not handle the Table Locks..
    The Program CORUAFWP, can taek care of table locks also, apart from the Errors in Goods Movements.
    Refer below thread for similar type of problem..
    COGI errors
    Hope this helps..
    Regards,
    Siva

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
    This information can help address blue screen errors specifically
    related to Turbo Memory, but may not solve errors related to other
    issues. Please read through the instructions completely, make sure they
    apply to your system, and after attempting the solutions please post
    back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Dear Tim,
    First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61.  I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
    Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14).  However, the BSOD recurrs.
    For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS.  Notwithstanding that, BSOD recurrs.
    During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)).  In either case, BSOD recurrs.
    I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install.  I never install any hardware (e.g. RAM).  And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
    I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment.  In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
    My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
    Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
    Memory: 1.00 G.B.
    System: Windows Vista Business (32-bit)
    Hard Drive: 160 G.B. @ 7,200 r.p.m.
    And, of course, with Intel Turbo Memory 1 G.B.
    I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless.  I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to.  The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
    Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here.  Any advice will be tremendously and enormously appreciated.
    Kevin Chen @ Taiwan

  • Valuation with material cost estimate: error with product "117122"

    Hi people,
    We have the error:
    =====================
    Valuation with material cost estimate: error with product "117122"
    Diagnosis
    In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
    In order to determine the current plan period, the system needs to read the valuation segment of the material master.
    The system has found that the current plan period is not filled forproduct "117122" in plant "UBE1".
    We have the follow configuration in trans.: KE40:
    . Determine material cost estimate
       . Transf. Standard Cost Estimate
    . Costing Variant
    . Control Data for Standard Cost Estimate
       . Period Indicator = "Current Standard Cost Estimate acc. to entry in mat master
    . Addiitonal data CO-PC
        . Transfer cost estimate in controlling area currency  "activated"
    We think the reason about our error is because the field above is activated and some configuration more is necessary for this case. For examplo: Trans.: OKYW and this one was not configurated yet.
    Do you know what happend?
    If we need to configure some transation, or sonly process the cost estimate?
    Thanks,
    Rosana.

    Hello Guido
    Thank you very much for your return.
    It is happenning in a Client that some people are doing the configuration.
    Before we didin't have in KE40, the fiel "Transfer cost estimate in controlling area currency" activated.
    And now, the people activate that in this new Client and I don't know the impact about that.
    I think we have to make the configuration in OKYW.
    The other transation you told me, we don't have any information.
    Could you tell me some other idea what happend?
    Message error is just "Message no. KE350"
    Abou claculate the cost:
    It was calculated by trans.: CK11N for future planning and the real wasn't not possible to release because this material already have moviments.
    Could you tell us is there is some thing more to do?
    Thanks,
    Rosana.

  • First call attempt fails with 12000; reason="Routes available for this request but no available gateway at this point"

    We've installed a new Audiocodes Mediant 1000B gateway for our customer.  They only have about 6 users enabled for Enterprise voice and using Lync for all calls.  They have an intermittent problem whereby the first call attempt to a number on the
    PSTN fails with 12000; reason="Routes available for this request but no available gateway at this point".  There is only one PSTN gateway installed.  All routes point to this gateway.  What I found initially is that the calls
    were failing after 10 seconds which is the default "failovertimeout" in the OutboundRouting.exe.config.  I found this post http://voipnorm.blogspot.co.uk/2012/06/lync-2010-gateway-timeout-call-failures.html and
    changed the value to 20 seconds.  Subsequent failures failed after 20 seconds (the new value).  The interesting thing is that the second attempt even a couple of seconds later succeeds.  My Lync server event log has 46046 "A call to a PSTN
    number failed due to non availability of gateways." for the failed call and 46047 "A PBX gateway is now responding to requests after some failures." for the successful call moments later.
    My environment is Lync 2010.  A single enterprise edition Front End with collocated mediation.  The server is virtual and in a different physical location to the gateway.  The two sites are connected via a LES1000.  The RTT between the
    sites is very low so it isn't necessarily networking.
    In the Syslog output on the Audiocodes we don't see the call even reach the gateway.  It's likely that Lync has simply marked the gateway as down and doesn't route the first call.  Then it wakes up and marks it as up and routes the next call.
    Update wise I'm on 4.0.7577.183, 199 and 217 for those that are up to date and the only components that are behind say that 223 is available.  Those being Core Components, Lync Server, Conferencing Server and Web Components.
    As I said, this is intermittent, apparently doesn't happen for every user (which I don't buy), but is easily replicated on request.
    I definitely think changing the failovertimeout value has reduced the number of failures.  But realistically I don't want users sitting there for 20 seconds before their call fails.  Or 19 seconds for the call to route.
    I've found a few posts on this and similar issues.  I don't get the 25051 or 25052 errors.
    Any help gratefully appreciated.
    Regards
    Randy Chapman
    Best Regards Randy Chapman

    Try to change the value of Failovertimeout to 1000.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error with cursor position on Chart

    Hello
    I'm getting an error with a simple Chart.  I'm trying to show the chart position (using labels and a crosshair) and I'm getting an exception ONLY (it seems) when the program starts up with the cursor above the chart.  If I move the cursor off to
    the side or something I don't get the error.
    Error: PositionToValue method cannot be called prior to calculating position of all chart area elements.
    The error occurs in the MouseMove event handler.
    private void crtPlotData_MouseMove(object sender, MouseEventArgs e)
    Point mousePoint = new Point(e.X, e.Y);
    crtPlotData.ChartAreas[0].CursorX.Interval = 0;
    crtPlotData.ChartAreas[0].CursorY.Interval = 0;
    crtPlotData.ChartAreas[0].CursorX.SetCursorPixelPosition(mousePoint, true);
    crtPlotData.ChartAreas[0].CursorY.SetCursorPixelPosition(mousePoint, true);
    lblXposition.Text = "Pixel X Position: " + crtPlotData.ChartAreas[0].AxisX.PixelPositionToValue(e.X).ToString();
    lblYposition.Text = "Pixel Y Position: " + crtPlotData.ChartAreas[0].AxisY.PixelPositionToValue(e.Y).ToString();
    HitTestResult result = crtPlotData.HitTest(e.X, e.Y);
    if (result.PointIndex > -1 && result.ChartArea != null)
    lblXvalue.Text = "X-Value: " + result.Series.Points[result.PointIndex].XValue.ToString();
    lblYvalue.Text = "Y-Value: " + result.Series.Points[result.PointIndex].YValues[0].ToString();
    }...etc.
    The exception occurs at the "lblXposition.Text" statement.
    For whatever reason if the cursor is above the chart at start up I get the error but I don't know how to prevent it long enough for "calculating position of all chart area elements".
    Any help would be appreciated.
    Thanks

    Yet the event DOES work as long as the cursor is not within the chart boundaries at start up.  ???
    It happens to, but I would rely on the documentation. However, you can set a flag to true in the Paint event of the chart, and in the mouseMove handler, exit if the flag has not been set yet.
    Armin

  • Nexus 5500 - Fabricpath Core Port - Error disabled. Reason:DCX-No ACK in 100 PDUs

    Has anyone seen Fabricpath Core Interfaces between two Nexus 5596UP switches error-disabled because of missing DCBX Acks after 50mins?
    I do not see interface errors and the peer is another 5500.
    Both switches are running 5.1(3)N2(1) with this port config:
    int e1/3
    switchport mode fabricpath
    ! Cisco 5m Twinax cables
    Log messages
    2012 May 25 17:40:59 nexus1 %L3VM-5-FP_TPG_INTF_DOWN: Interface Ethernet1/3 down in fabricpath topology 0 - Interface down
    2012 May 25 17:40:59 nexus1 %ETHPORT-5-IF_DOWN_NONE: Interface Ethernet1/3 is down (None)
    2012 May 25 17:40:59 nexus1 %ISIS_FABRICPATH-5-ADJCHANGE:  isis_fabricpath-default [3365]  P2P adj L1 nexus5 over Ethernet1/3 - DOWN (Delete All) on MT-0
    2012 May 25 17:40:59 nexus1 %CDP-5-NEIGHBOR_REMOVED: CDP Neighbor nexus5(FOX1550GDH1) on port Ethernet1/3 has been removed
    2012 May 25 17:40:59 nexus1 %LLDP-5-SERVER_REMOVED: Server with Chassis ID 547f.ee63.fa88 Port ID Eth1/1 on local port Eth1/3 has been removed
    2012 May 25 17:40:59 nexus1 %ETHPORT-2-IF_DOWN_ERROR_DISABLED: Interface Ethernet1/3 is down (Error disabled. Reason:DCX-No ACK in 100 PDUs)
    Robert

    Can you send the output of
    show lldp interface ethernet 1/3
    show lldp dcbx interface ethernet 1/3
    a workaround may be to disable lldp on both sides on these physical interfaces

Maybe you are looking for