COGI errors regarding work orders

HI Gurus,
can anybody please help me with this issue. There are COGI errors occurring for HIBE items that are put on the work order. The error message in COGI is you do not have authorization for this transaction with movement type 261. It is not happening for all the technicians and not for all the HIBE materials. It happened during a week time frame and now they do not seem to go away. Why are these COGI errors occurring and what needs to be done to fix them now. PLease advise. Help is greatly appreciated
Thanks
Anusha

Hi,
It is possibly the plant that determines if the user is allowed to post the goods movement or not. Relevant authorization object is M_MSEG_WWA, this is checked for the activity '01' and the plant. If that is not the issue then check the authorizations M_MSEG_BWA, M_MSEG_BWE, M_MSEG_BWF, M_MSEG_WWE, M_MSEG_WWF.
-Paul

Similar Messages

Error creating work order for new notification - Related SyncBO not present

Hi,
We are working with MAM3.0 standard application.
We age getting an error while creating work order for a NEW notification.
In this scenario both notification and corresponding work order are also not created.
Here is the error for MAM30001 Sync BO in MEREP_MONI:_
Reading inbox record (mobile ID=0000001444, seq, no.=29, rcd_cntr=1, data=TOP0001000000
External format successfully converted to internal format: ldata=TOP0001000000000000000
Related SyncBO MAM30_010 with Sync key 0000000028 is not present on the device.
Return code 1 (DOWNLOADER)
   Here is the error for MAM30010 Sync BO in MEREP_MONI:_
Return code from RFC BAPI Wrapper call:Order NEW does not exist
Return code from RFC BAPI Wrapper call:The order/network type is not defined
Return code from RFC BAPI Wrapper call:Order NEW does not exist
Return code 0 (UPDATE MEREP_506-STATUS)
Can any body please tell me what is the sollutions for this error
your help in this regard is appreciable.
Regards,
Murthy

Hi Murthy,
II have no idea what patch level you are on. A while back we had similar issues with some clients. There are several patches around that area available. Perhaps you should have a look into patch 959732.
Hope that helps.
Regards,
Oliver

Error in Work order -IW31

Hello All,
We are facing one error while creating work order.
When we are creating work order from IH01 > Goto> Create order or directly creating from IW31 by putting PM03 in type , priority and equipment details then after release if we press save button then system says that invalid account group.
What can be reason for same.
Regards
Himanshu

Hi,
Are you facing this issue during Normal order creation with that functional location ?
Please check CC assignment to functional location and settlement rule applied while saving order.
Thanks
Riyaj

Regarding work order urgent pls

Hi,
     i have a requirement where i need to get the time slots dynamically which i need to use in select query to retrieve data.
the time slots are,
S1 : 8-10 AM
S2 : 10-12
S3 : 12-14
S4 : 14-16
AM : 08-12 and goes on upto 20.00 PM
when u open a workorder in iw33 transaction in the location tab u can find an ABC indicator where we are using these time slots for the work order.
Now my problem is to select the work orders based upon the current systime and timeslot.
For eg:   if user executes the report say at 10.00 AM he should get all the work orders falling in the time slots S1. in the same way if he executes the report at 12.00 he should get work orders falling in the time slot S1,S2,AM and the user may execute the report at any time.
can anyone suggest how to implement the code and is there any functional module which takes current time and gives the time slots as output.
In the standard workorder u wont find the time slots as S1, S2,S3 u will find it as A,B,C,D in ABC indicator field of location tab.
pls urgent help me and surely u can expect points.
Message was edited by:
        Ravi Kumar Gunda

can you make use of the logic as
sy-uzeit+0(2) --> hrs cnt like
08
10
12
14 16
into variables and
case timeslot.
when
endcase .
vl = lower value
vh = higher value and then substitute the same in the
say user has entered a time of 11:40 am
then set the lower value to 8
and higher to 12
vl = 8
vh = 12
do this in the case endcase.
select query
select f1 f2 ...
        fx   between   vl and vh .
regards,
vijay

Manufacturer Part Number on PM Work Order

Hi experts, is there a way to put manufacturer part number on the PM work order? We can do that on purchase order, but got an error on work order. We want to use work order to create purchase requistion. Thanks a lot!!!

MD,
I guess the MPN comes from the equipment??
You may be able to use one of the MM user-exits like COZF0002 (Change purchase req. for externally procured component) to determine the MPN from the equipment, and populate the corresponding PR field. However, you would not see this data in the work order.
If you did need to see the MPN in the work order, then utilise user-exit IWO10018 (enhancement tab)
PeteA
[www.pjas.com]

Error in Cogi after cancelling production order- Urgent

Hi Experts,
Its me again.
I would liek to seek your help regarding this problem I have.
Below is the process done:
1) Create production order
2).CO11N : producing qty in quality inspection status (Stocks received in QI status)
3) QA32 : accepting inspection lot ( thus the stock will be moved to "unrestricted")
Due to some errors discovered, prod order needs to be cancelled
4) CO13 : Cancel production => mvt 102 will fall into the cogi with error message "Deficit of BA Stck in qual.insp ... etc"
Could you please help me what to do to solve this error. please

Hi ,
If QM is active , you cannot use 322 movement directly.
For this you need to activate 08 insp type in MM insp set up.
After that , you can bring the matl back into Quality using 322 movement.
Dont forget to deactivate the 08 insp type , once your work is over.
Hope this will helps you.
Regards
K.M.Arun

Error when printing work order with iw32

Hello all,
When i was printing work order using IW32, the order success to be saved but it can't be printed. And i get this error message :
Express document "Update was terminated" received from author ...
i check with T-Code SM13, and i found error on
PM_ORDER_PRINT_CONTROL
further, i go check to ABAP Short dump, and found the error analysis
A RAISE statement in the program "SAPLSFES " raised the exception
condition "CONTROL_FLUSH_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
have anyone know the OSS or have some experience to solve this problem ? hope you can help me..
thank you for your attention..
Regards,
Anggara Mahardika

Hi
Can u let us know whether u are trying to Save the Print out on to ur Desktop ... or using GUI_DOWNLOAD Fm in ur program ...
surya

How to prevent an error of [WIP work order ... is locked-]

Hello experts
Can someone tell me how to prevent an error which [The WIP work order associated with this transaction is currently locked and being updated by another user. Please wait for a few seconds and try again.Transaction processor error].
How can you prevent that error?
P.S.
Oracle support　told me [When you make data of mtl_transaction_interface, give same transaction_header_id to all data. Then, you kick worker with appointed transaction_header_id. Or, you set up being uncompatible with workers].
I cannot allow that making with same transaction_header_id and being uncompatible with worker on my system.

Hi santosh,
You can implement badi BBP_DOC_CHECK to check vendor email and issue error message.
Kind regards,
Yann

Error Message while assigning resource to work orders

Hi All,
We have the MRS tool integration with service work orders for scheduling. When we assign the resources with 9 hours as duration there is no error. When we allocate more than 9 hours for some resources, not all, we receive the error message as
" Duration    29,160 S is not a multiple of 15 minutes " . These duration of secs varies when the duration is varied > 9 hours.
We have checked the planning board profile configurations but nothing seems to be visible. In customising we have the following settings,
Time Granularity                 : 15 mins
Min duraiton of assignments: 15 mins
Automatic Assignment Splits
Min duraiton           : 2 hours
Max overtime hours : 2 hours
Max Ratio is %       : 75
Can anyone throw some light on this?
Regards,
Selva

Hi Anil Satya,
The MRS is integrated with Service Order types and the operations are selected for each order then the assignment of hours takes place in MRS.
If the assignment is done for 9 hours then there is no such error. These errors are very specific to some personnel numbers ( not for all ) where the duration is more than 9 hours.
Is there any availability of resources for this operation / job through configuration settings? Why such a question is some resources even when 15 or 20 hours is assigned , no errors exists.
Hope this explanation provides a better clarity.
Regards,
Selva

Error while creating work order from purchase order

Dear All,
We are having a subcontracting scenario where we are creating a Work order from PO but getting the below error.
Error - "No master data assigned to partners-locations-product combination."
Done all the setting mentioned in the below thread but the error still persist.
Error in Generating Work order from Purchase Order
Any suggestions on which master data we need to check?
Thanks,
mahesh.

Hi Mahesh
In the below transaction
/SCA/MFGCFG - Work Order Configuration
Can you maintain Master data Assigment properly
Valid From
Valid To
Active---Checked
Can you please list what you maintained
Regards
Vinod

Error while generating Work Order

I have a problem while generating Work orders in SNC.
I set the configuration as belows.
<General setting for Work Order generation>
1.Granularity -> Work Order per Purchase Order Item
2.Create WOs with Report -> Check
3.Publish Work Order Upon Creation and PO change -> check
4.Send Work Order Information -> Upon Agreement and when a Phase Is Completed
5.Send Production Progress Notification -> When a Phase Is Completed
<Phase Structure>
1.Comp. from SC Order -> Use SC Comp. as Input, Product and Co-Products as Output
<Master Data Assignment>
1.MD Used for WO -> Phase Structure
2.Active -> Check
When I use the program /SCA/WO_CREATE for generate Work Orders, Run time error occurs with below messages.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Except.                CX_SY_REF_IS_INITIAL
<Error analysis>
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in
procedure "GET_PIO_LCTYPE" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "LS_NODEREF-R_NODE").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
<Missing RAISING Clause in Interface>
Program                                 /SCA/CL_WO_PHASE==============CP
Include                                 /SCA/CL_WO_PHASE==============CM00V
Row                                     1
Module type                             (METHOD)
Module Name                             GET_PIO_LCTYPE
<Trigger Location of Exception>
Program                                 /SCA/CL_WO_PHASE==============CP
Include                                 /SCA/CL_WO_PHASE==============CM00V
Row                                     45
Module type                             (METHOD)
Module Name                             GET_PIO_LCTYPE
Please let me know what I have to do for this error.
Thanks and Regards
JT

Hi JT
Clearly the problem is with the method GET_PIO_LCTYPE of interface /SCA/CL_WO_PHASE
Check whether note 1363834 should be implemented
It could be because of some corrupted WO entries in database
or some customizing entry it is expecting
suggest you to debug the method and try to check what it is expecting
Best Regards
Vinod

COGI error generated while collective order confirmation

hi ALL, this is the real task for all PP GURUS.
the issue is related with collective order confirmation.
client is using customised program ZPP_CONF to confirm the collective order which is based on the sap spro program CORUPROC.this include automatic goods receipt,backflush & actual cost update .as user use zpp_conf for confirmation all this actions happened in backgruond.
now after using ZPP_CONF . the confirmation is not happening .instead of that it is going in COGI where they are getting a error massage which is as follows
"You have no authorization for this transaction with movement type 101u201D
this error continues for 10-15 minutes after doing refresh it goes. & confirmation happens.
this is not happening for all orders but for 8 out of 10.
users have proper authorisations.
they have enough stocks in st. locn.
they are loosing lot of time becuse of this.
HOW CAN I RECTIFY THIS ERROR GURUS?
when i search i found this is written in the CORUPROC documentation
Incl. incorrect goods movement: Not only preselected but also incorrect goods movements that are usually processed with transaction COGI are selected and processed.
VENKADESH

Hi,
The Program CORUPROC only can adjust the Errors in Goods movements. It can not handle the Table Locks..
The Program CORUAFWP, can taek care of table locks also, apart from the Errors in Goods Movements.
Refer below thread for similar type of problem..
COGI errors
Hope this helps..
Regards,
Siva

Creating new work order - error on %001

Hi all,
Creating a new work order from the SAP Work Manager 6.0 application should be a standard functionality,
However, on the system of our client, this goes wrong.
Upon creating a new work order, we get the error 'Enter a numerical operation number'.
New objects get an ID that starts with 'LOCAL_xx:xx:xx', which is converted to %001.
SAP should recognize this and convert this automatically to 0010, 0020, ...
how come this does not happen?
it works fine on our SAP system, our customer's system gives an error.
Kind regards,
Judith

Have you done any enhancement to standard product "specifically create method of Work Order Class handler" . or the standard product functionality itself is not working ?
I don't see any reason why it works in your system but not in customer system. Try to put break point in create method of Work order class handler and check what values are passed for operation number before invoking Work Order create BAPI.
Infact Work Manager product converts local numbers to incremental sequential numbers before invoking create BAPI for Work Order.
BR,
Manju - SAP CEG UX/Mobile

Error in File IC Work Order Report_v3-3: Max processing time or Max records

Hello Friends,
                      While running the Crystal report in Business Object Infoview, I am getting the below mentioned error when i am trying to go to the next page or trying to export all pages of report into PDF and any other format. I can see the first page in output and can export 1st page into PDF.
2010-12-29 17:28:05
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Error in File IC Work Order Report_v3-3:
Max processing time or Max records limit reached---- Error code:-2147215357 Error code name:internal
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.getPage(Unknown Source)
     at com.businessobjects.report.web.event.q.a(Unknown Source)
     at com.businessobjects.report.web.event.q.a(Unknown Source)
     at com.businessobjects.report.web.event.bq.a(Unknown Source)
     at com.businessobjects.report.web.event.bt.broadcast(Unknown Source)
     at com.businessobjects.report.web.event.ak.a(Unknown Source)
     at com.businessobjects.report.web.a.p.if(Unknown Source)
     at com.businessobjects.report.web.e.a(Unknown Source)
     at com.businessobjects.report.web.e.a(Unknown Source)
     at com.businessobjects.report.web.e.if(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewerUpdater.a(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.do(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595)
Please Help.
Thanks,
Ziad Khan

Ok it looks to me that there are more than 20000 rows in your backend system that have to be fetched.
You can change this limit in the Central Management Console . Login as administrator and go to Servers . Double-click on the Crystal Processign server and change the value in the field Database Records Read When Previewing or Refreshing (0 for unlimited) according to your needs. AFter the change you have to restart the Crystal processing server.
Regards,
Stratos

COGI error in relevance in production order goods movement

Hello,
Yesterday I have a COGI error with regards in reservation. "RE Quantity moved exceeded by 7,912 LB: 1000710 0111 0001 201200". But today someone done something on the production order, and the error yesterday in COGI are fixed. Am confused what happen or what they did to fixed this since yesterday the error still there but now it is gone.
when checking the Documented Goods Movement for material 1000710 in the production order here the details,
Goods MVt   Mat. Doc Mvt type Batch      Qty   Reservation
1                       4908430     261     201199    6000 1112345
1                       4908426     261     201198   14000 1112345
1                       4908437     262     201200   14000 1112345
2                       4908430     261     201200   14000
This is what it shows? could some one explain me with this data what was the reseason yesterday i did not fixed the COGI error while now it was fixed? and why in RESERVATION 1112345 it only shows qty 6000 not 14000 for this order?
Hope for your kind and urgent reply to this issue
Thanks
JJ
Edited by: John Jay Palisoc on Jul 24, 2008 5:02 AM

Hi JJ,
well, as far as I can see, there is an unplanned 261 (without reservation no.). This one (doc. 4908430) has wihtdrawn additional 14000 for batch 201200. Therefore, the later 262 posting (doc. 4908437) with 14000 for that batch could be put into store without error.
That's all
Regarding the reservation: It shows qty 6000 because as first step 14000 were withdrawn, then additional 6000 and then 14000 were put back. So 6000 remain.
Regards, Andreas
Edited by: Andreas Seibel on Jul 24, 2008 3:37 PM
Edited by: Andreas Seibel on Jul 24, 2008 3:40 PM
Edited by: Andreas Seibel on Jul 24, 2008 3:45 PM

COGI errors regarding work orders

Similar Messages

Maybe you are looking for