Coldfusion 9.0.1 cumulative hot fix question...

We have CHF2 on our 9.0.1 server plus alll post CHF2 security updates. Just the other day I noticed that a cumulative HF 3 and 4 were released and I must have missed these in early 2013 when they were released. My question is is a CHF2 server with all security updates equivalent to CHF with all security updates? Or did CHF3 and CHF4 get some non security related hotfixes and other enhancements?
I'm asking all of this as I'd like to get to the latest JDK 1.7.
And if I should update to CHF4 can I just apply that directly? Or are there possibly a few files in CFIDE and WEBINF or jars that were the non security related hotfixes?

Hello samd,
The CHF4 included Security bulletins APSB11-29, APSB12-06, APSB12-15, APSB12-21, APSB12-26, and APSB13-03 and some bug fixes.
samd wrote:
Or did CHF3 and CHF4 get some non security related hotfixes and other enhancements?
You can apply CHF4 directly on the server. Also, as Carl suggested, please take a backup/snapshot of the ColdFusion files/folders including CFIDE.
samd wrote:
IAnd if I should update to CHF4 can I just apply that directly? Or are there possibly a few files in CFIDE and WEBINF or jars that were the non security related hotfixes?
I'm guessing Adobe will release CHF5 shortly after I decide to do this.
Hope this helps.
Regards,
Anit Kumar

Similar Messages

Update to ColdFusion 9.0.1 : Cumulative Hot fix 2 from Cumulative Hot fix 1 maxed CPU

We have 5 load balanced web servers and we updated two of them to ColdFusion 9.0.1 : Cumulative Hot fix 2 and Coldfusion Security Hotfix APSB11-29 from ColdFusion 9.0.1 : Cumulative Hot fix 1. When the two servers hit heavy load, the CPU maxed out and brought CF to a halt on those machines. In the C:\ColdFusion9\runtime\logs there are timeouts in the logs waiting for an available thread to run.
Server1: coldfusion-out56.log
02/09 09:26:36 Information [scheduler-0] - Run Client Storage Purge
java.lang.RuntimeException: Request timed out waiting for an available thread to run. You may want to consider increasing the number of active threads in the thread pool.
at jrunx.scheduler.ThreadPool$Throttle.enter(ThreadPool.java:116)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:425)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
java.lang.RuntimeException: Request timed out waiting for an available thread to run. You may want to consider increasing the number of active threads in the thread pool.
at jrunx.scheduler.ThreadPool$Throttle.enter(ThreadPool.java:116)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:425)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
java.lang.RuntimeException: Request timed out waiting for an available thread to run. You may want to consider increasing the number of active threads in the thread pool.
at jrunx.scheduler.ThreadPool$Throttle.enter(ThreadPool.java:116)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:425)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
java.lang.RuntimeException: Request timed out waiting for an available thread to run. You may want to consider increasing the number of active threads in the thread pool.
at jrunx.scheduler.ThreadPool$Throttle.enter(ThreadPool.java:116)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:425)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Server2- coldfusion-out129.log
02/08 12:42:27 Information [scheduler-0] - Run Client Storage Purge
java.lang.RuntimeException: Request timed out waiting for an available thread to run. You may want to consider increasing the number of active threads in the thread pool.
at jrunx.scheduler.ThreadPool$Throttle.enter(ThreadPool.java:116)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:425)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
java.lang.RuntimeException: Request timed out waiting for an available thread to run. You may want to consider increasing the number of active threads in the thread pool.
at jrunx.scheduler.ThreadPool$Throttle.enter(ThreadPool.java:116)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:425)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
java.lang.RuntimeException: Request timed out waiting for an available thread to run. You may want to consider increasing the number of active threads in the thread pool.
at jrunx.scheduler.ThreadPool$Throttle.enter(ThreadPool.java:116)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:425)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
These time outs continuted on until the service was restarted. Has anyone experienced this when they updated to CHF02?

I am not at all surprised. There is no such thing as an update from Cumulative Hot fix 1 to Cumulative Hot fix 2!
The rule is, apply only one cumulative update at a time, normally the most recent one. It's all in the word "cumulative". Cumulative Hot fix 2 includes all of CHF1.
My advice is that you should uninstall both CHF1 and CHF2, restart ColdFusion, then re-install CHF02. However, be aware that uninstalling these hot fixes could be quite intricate. They involve updating a large number of ColdFusion's system files.
If you had followed the respective installation instructions for Cumulative Hotfix 1 and Cumulative Hotfix 2, then uninstalling should be straightforward. You will find the instructions at the bottom of those pages.

Cumulative Hot Fix 2 for ColdFusion 8.0.1?

We've been feeling a little leery about Adobe's stance with
CF8 for a while now due to the lack of patches and updates compared
to what we've been used to expecting from Macromedia. We've been
checking the patch and security pages a couple times a week looking
to see if there have been any changes. I noticed a change date on
the CF8 patch page the other day but no new patches showed up.
http://www.adobe.com/support/coldfusion/downloads_updates.html
Then today I noticed the date changed again at the bottom and
now there was a new patch at the top replacing the 2 that were
there before. Cumulative Hot Fix 2 for ColdFusion 8.0.1
The patch says it's from 10/20/2008 and if you decompress the
file it gives a date of 10/17/2008 on the file. This patch was new
to the public as of this week though. The reason I'm posting is to
try to understand why this patch has been sitting unreleased for
nearly 5 months now? There clearly have not been any changes to the
file in that time frame so that was either the best written patch
with the most exhaustive testing ever or someones been neglecting
posting the patches that have been completed.

@brentil, ah, ok. I understand now. Yep, that is curious. I
can confirm that it wasn't there on Mar 17, per the Google cache
page:
http://74.125.93.104/search?rlz=1C1GGLS_en-USUS291US306&sourceid=chrome&ie=UTF-8&q=cache:h ttp://kb.adobe.com/selfservice/viewContent.do%3FexternalId%3Dkb402604%26sliceId%3D1
Of course, by the time someone reads this in the future, it's
possible that the cached page will be different again. One would
want to note the date offered by Google at the top of the page it
shows.
So the real question is why the CHF link was note posted here
until now. I'm with you that some resources are not always updated.
I blogged about it:
http://www.carehart.org/blog/client/index.cfm/2008/7/16/beware_technotes_may_not_be_listed _elsewhere
Perhaps more dismaying is that the CHF2 technote lists many
more HFs included than appear in the main hotfix page (the URL you
pointed to). So one might ask why we should have had to wait for a
CHF to get those hotfixes.
Also, I notice that the main cf8 downloads page (which you
pointed to originally) does not, in fact, refer to the 8.0.1 CHF
(though it does list 8.0 CHFs). That should be address.
I agree that we should expect the hotfixes page to list any
hotfixes or CHFs as soon as they're available. Sorry I missed your
main point.
Sadly, I don't know that we can expect too much to come of
this discussion here. There's just no guarantee that anyone
responsible would see it. But here's good news. A couple of blog
entries have raised the concern:
http://www.creative-restraint.co.uk/blog/post.cfm/coldfusion-8-0-1-cumulative-hotfix-2
http://blog.pengoworks.com/index.cfm/2009/3/18/ColdFusion-v801-Hot-Fix-2-released-in-Oct-2 008
And Ben Forta is a party to the second one, where I've just
added a comment asking to find who we can press about this.
Finally, just an FYI: that URL you offered is indeed the same
page that I'd offered. The URL I gave (
http://www.adobe.com/go/kb402604)
comes from the "permanent link" offered at the bottom of all Adobe
technotes, which is just a nice shorter URL.

CFMX 7.0.2 Cumulative Hot Fix 3 Question...

I feel like an idiot for asking this, but I'm hoping someone can clarify the install instructions for CFMX 7.0.2 Cumulative Hot Fix 3 for me.
I totally get uploading the chf7020003.jar file through the CF Admin (which really just copies the JAR to the cfusion/lib/updates folder), but what's throwing me off is in the bottom of the document where it talks about hot fix #65719 (CFDocument hot-fix). This hot fix requires manually swapping out some JARS in the cfusion/lib folder. I'm all good with that too.
My ultimate question here is DOES CFMX 7.0.2 Cumulative Hot Fix 3 ****require**** hot fix #65719 (CFDocument hot-fix)? Or can I just install the chf7020003.jar and not worry about the CFDocument hot-fix? I'd like to NOT install the CFDocument hot-fix unless it's required.
Also, I know the instructions for installing the Cumulative updates say to remove other installed hot-fixes, but I didn't see hot-fix #65719 in the list of hotfixes that Cumulative Hot Fix 3 includes, so I'm guessing I'd need both?
This has got to seem like a silly question, but it just doesn't seem clear to me, any help to clarify this is greatly appreciated.
- Kurt
CFMX 7.0.2 Cumulative Hot Fix 3 install instructions
http://kb2.adobe.com/cps/402/kb402465.html
Hot Fix #65719 (CFDocument hot-fix) install instructions
http://kb2.adobe.com/cps/402/kb402093.html

My reading of the cumulative hotfix 3 page is that the #65719 hotfix
is not included in the cumulative hotfix 3 and needs to be installed
separately. (Especially from "The following update requires that the
files be installed directly to the operating system and not through
the standard hot fix procedure" I read that #65719 cannot be installed
via a normal hotfix, which cumulative hotfix 3 seems to be).
Mack

Installing Cumulative Hot Fix 2

The installation instructions for ColdFusion MX 7.0.1
Cumulative Hot Fix 2 say, "Note: Any individual hot fixes
previously installed that are now contained in this cumulative hot
fix should be removed."
Since I previously installed the MX 7.0.1 Cumulative Hot Fix
1, does that mean that I have to remove it before I install
Cumulative Hot Fix 2, since they contain some of the same hotfixes?
If so, what is the procedure for removing it?

Hi,
You really do not have to worry about previous cumulative
hotfixes as coldfusion server does not load them into jvm. It only
loads the latest cumulative hotfix. Article recommends you to
remove individual hotfixes as coldfusion does not check for each
hotfix in the cumulative hotfixes.
If you really want to remove the previous cumulative hotfix,
go to Coldfusion-home/lib/updates (standalone install) and delete
chf7010001.jar. For J2EE install of coldfusion, go to
Cfusion-ear/cfusion-war/WEB-INF/cfusion/lib/updates directory and
delete the chf7010001.jar. You will have to restart coldfusion
server after making the change.
Thanks,
Swathi.

ColdFusion MX 7.0.2 Cumulative Hot Fix 1 - Issue

Hi,
Recently the hot fix was patched on my app server . The
screen which was all along working fine gave me an errror.
Iam Calling a Oracle Stored Procedure with parameters from
the .cfm page, usinf <cfstoredProc> and <cfprocparam>
iam passsing the IN and OUT variables.
But gettig an error ' Error Executting Database Query'
Syntax or Access violation
SQL STATE = 4200
When i execute a Storedprocedure without parameters it is
working fine.
If the patch is removed the procedure was invoked and
executed succesfully
Searched the Tech notes but couldnt find any thing related
to this,
Any help in this regard is Appericated
Thanks
MK.:confused;

Product issue 66468 was recently opened for what appears to
be related. The following is the description:
Using datatype of number as an out parameters results in
[Macromedia][Oracle JDBC Driver][Oracle]ORA-06502: PL/SQL: numeric
or value error: character to number conversion error ORA-06512: at
line 1.
Would you be able to supply a simple test case if you feel
your problem is different. Thank you.
Ted Zimmerman

ColdFusion MX 7.02 - CFDocument Cumulative Hot Fix

Is anyone else having any issues with this new hotfix to fix
the text cutoffs when using <cfdocument> to pdf? This hotfix
came out on 6/26/07.
It appears to have fixed the text chopping issue when a block
of text spills over into the next page, but my table sizes/font
sizes seem to be all messed up now.

We just applied the new hotfix -- dated 9/4/2007. Now, the
font in our page header is much smaller than the font in our page
body -- and everything was perfect prior to the patch install. Has
anyone else seen this issue?

Hot fix cf801/cfide

newbe...how can I verify that the hot fix that I applied is valid. I downloaded (cf801.&cfide zip files) and followed the instructions. After stop/start the services...accessed the admin console and click on the I did not see any differences between our dev vs prod environment. Any help would be appreciated.

I am hoping you realize that the cumulative hot fix for CF801 includes not only CFIDE. The hot fix installation instructions tell you you have to copy files to the following 3 directories
{CF_INSTALLATION_DIRECTORY}\lib
{CF_INSTALLATION_DIRECTORY}\wwwroot\CFIDE
{CF_INSTALLATION_DIRECTORY}\wwwroot\WEB-INF
When I unzipped the hot fix download file, I saw that it includes the update JAR file CF801\lib\updates\hf801-00002.jar. I would therefore expect you to see hf801-00002.jar as the update level, when you go to the System Information page in the Administrator.
If you don't, then it could be that you have performed the installation incorrectly. For example, did you stop ColdFusion before installing the hot fix? Did you then delete any previous update JARs before installing the current cumulative hot fix?

Hot Fixes or Updater?

I am currently running CF 6.1 (with Updater) on a Windows
2003 server. Several times a day JRUN seems to go nuts and runs
both CPUs at about 30% for many minutes at a time, sometimes
longer. This is not load from an application load, just JRUN
running.
Does anyone have an idea what is happening?
I thought mayby there was some type of update I had to apply,
so I went to the Update , hot fix web page of CF 6.1
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=b3a939ce
Now I wonder, are these hot fixes that are already in the 6.1
updater, or hot fixes that can be applied after the updater is
already applied?
Thanks for any and all help.

The items listed under a section "ColdFusion MX 6.1 Updater
Hot Fixes" for example, are the hot fixes that have come out after
that version came out and need to be applied to it.

Can't Install ColdFusion Builder 2 Hot Fix

I am trying to install the ColdFusion Builder 2 Hot Fix. When starting the InstallAnywhere program I get this message: Unable to execute the desired program. Please get another copy of the installer and try again." Does anybody have a solution?

Can you please rename the installer as follows and then try installing?
Adobe ColdFusion Builder 2 HotFix 1.exe
Thanks,
Krishna

Installed WIndows 7 & correct bootcamp drivers, windows will not activate "hot fix" or "Support drivers"

Hello, i hope someone can help,
i have repeated this whole process 3 times already, it has taken 8 strait hours of my time and i still have had no success.
QUICK SUMMERY
To put it simply, After windows is up and running on my mac, the wireless network wont work, so i cannot download the hot fix, and the support driver files from bootcamp will not open because it says they are not "32 Valid" ?. But im using a 64bit disk.
The wireless network adaptor automatically doesn't work on windows right after installation,
so i had to load the Hot Fix onto an SD card along with the bootcamp drivers, then open the hotfix file in windows.
The first time i was able to install the fix, windows restarted and installed the update, logged back on... and nothing changed.
At that point i attempted to open the "Setup" file in the bootcamp support folder, and an error message came up saying it wasn't valid.
LONGER EXPLANATION OF MY COMPLETE PROCESS: (to cancel out any questions)
i was able to find my support driver from here:
http://swscan.apple.com/content/catalogs/others/index-leopard-snowleopard.merged -1.sucatalog
its some old fashion coded page that has a bunch of apple drivers you can download by pasting one of the codes in your browser,
i searched for bootcamp support drivers, and found the code for my exact model (Mac Pro 8,2)
i was able to manually downloaded the drivers instead of using bootcamp assistant.
As a side note,
i was able to download the bootcamp drivers via boot camp assistant after the 5th try,
so now i have both files that i know are supposed to work 100%. they are loaded and unzipped on an SD card like they are supposed to be for when i open windows.
I have a Genuine Windows 7 Home Premium x64 bit CD from the inlaws so i used that CD after i partitioned my drive in bootcamp.
Bootcamp run like it was supposed to, and i followed step by step instructions in this video: https://www.youtube.com/watch?v=uVfRQ0YIDUI&feature=related
once windows was finished installing,
it automatically would not detect a network card, so i couldn't connect to the internet and download the apples bug fix. (The Hot fix)
instead i downloaded the hot fix on a separate SD card, turned windows back on and loaded the hot fix from the SD card.
Windows installed the hot fix update, restarted, but nothing changed.
Ive even tried skipping right to uploading the drivers, and windows wont activate the support because it says its not "32 Valid"
I completely removed windows 7 vis bootcamp to rinse and repeat hoping i made a simple mistake, but no same thing happened.
Conclusion
-im Wondering if i should "Istall important Windows Updates" during the begining of windows preperation...
maybe that will fix the issues of it not reconizing wierless network, and not being able to upen up the bootcamp file?
(it says you are not supposed to install any windows updates untill the HOT FIX and BOOTCAMP SUPPORT is activated on windows)

Keith Doherty3 wrote:
You have been too cleaver for a Boot Camp install.
The partition system does NOT like anything other than a standard arrangement which creates 4 partitions.
EFI -200mb
OSx - Extended Journaled
Buffer-200mb
Windows -NTFS
Return to OSx -Open Boot Camp tool from the utilities folder reset to a single partition.
Start again and when you get to Windows - Let all the drivers load on the CREATED partition. Use the External for storage !
Just for your information, as it doesn't seem you have ever used BC.
When starting the boot camp assistant the first thing it want to do is download the Windows Support drivers and asks you to save them to a DVD, it will also allow you to save them to your OS X hard drive or to any drive connected to the system. Once those drivers are downloaded it then starts the Win install. What you must do is copy those support drives to a media that Windows can See and Read from. Like a DVD or a thumb drive formatted FAT32
No where in the OPs post does he say anything about fooling with any partitions on his internal drive other then creating the BC partition.
His problem is he saved those support files to a Mac OS X formatted external drive. Windows can not read Mac Extended (Journaled) formatted drives. So he can't load the drivers for Windows until he copies those support files ove to something that Windows can read.

Hot Fix error message for KB979344 "this update is not applicable to your computer", on Windows 7 64 bit with SP1

I've been having issues with an external Esata drive. Instead of being seen as a removeable drive, it is seen as a hard drive. This has caused us nothing but problems since our full disk encryption software automatically starts to encrypt
the drive rendering it useless.
The real problem I'm having is installing the Hot Fix, KB979344, for this issue. when tring to install, I get the message, "this update is not applicable to your computer" I've looked and this hot fix doesn't seem to be part of SP1, but
I could be missing it. Any thoughts?
Thanks,
Keith

Hi Keithk,
This hotfix is already contained in Windows 7 Service Pack 1.
Please add the registry key to check if the issue persists. (For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. )
Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Storage
Create a DWORD Value, name SATAHotplugPolicyOverride,
set 1 in Value Data.
Restart the computer to check if it works.
Regards,
Miya
TechNet Subscriber Support in forum. If you have any feedback on our support, please contact
[email protected]
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

I made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft helps in stop freezing?

i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft i.e, " support.microsoft.com/kb/979491" helps in stop freezing in dual boot mechanism?

Windows has a software updater built into Windows and when you install the Boot Camp drivers then it will install an Apple software updater also. I believe Windows is set to automatically download and install your updates as does the Apple software Updater. They both will update the individual files it needs to periodically.
"Microsoft updates" and "Windows updates" are basically the same thing in Windows. Are you talking about the "Windows support software" when downloading from Boot Camp Assistant? Apple installs a software updater for it's Boot Camp drivers in Windows 7 so you can do it manually or automatically.
The "Hot Fix" your referring to is only for certain motherboards built from other Windows only computer manufacturers and does NOT pertain to any Apple computers.
If you have a problem with your computer then it's best to ask a specific question so we can help better.

Hot fix 4 is 64 bit. What to do if need to sequence for W732 bit embedded ?

Hello,
hot fix 4 for APP-V 5 SP2 is 64 bit
what to do if I want to sequence for W7 Embedded 32 bit (Hp Thin Client)
On sequencer (w7 32bit) and client W7 32 bit SP2 I cannot install hotfix 4.
Probably, it will affect the functionalities fixed by Hotfix 4?
I guess I have to try and see if it considerable in my environment?
Thanks.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Those are 32-bit executables that will install the right hotfix or Sequencer on x86 or x64 Windows.
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Hot fix not able to apply

http://kb2.adobe.com/cps/925/cpsid_92512.html
I tried to apply hot fix as mention in the above url for cf 9.0.1. but when I restart the server it still showing as pointing to same old jar file.
I followed the stems as follows.
===============
ColdFusion 9.0.1
Download CF901jar.zip and extract hf901-00003.jar.
In ColdFusion administrator, select System Information page by clicking the icon "i" in the upper right corner.
In the update file textbox, browse and select hf901-00003.jar and click submit.
Stop the ColdFusion instance.
Go to {ColdFusion-Home}/lib/updates (for Server Installation) or {ColdFusion-Home}/WEB-INF/cfusion/lib/updates (for Multiserver and J2EE installation) directory. If hf901-00001.jar or hf901-00002.jar exist, delete them. Otherwise, ignore this step.
Start the ColdFusion instance.
If there are multiple instances, repeat steps 2 through 6 for each instance.
==================
after this my setting are unchanged as follows
==============
System Information
Server Details
Server Product
ColdFusion
Version
9,0,1,274733
Edition
Enterprise
Serial Number
1185-5007-6094-8863-8088-2578
Operating System
Windows 2003
OS Version
5.2
Update Level
/D:/JRun4/servers/DevColdF9Secondary/cfusion.ear/cfusion.war/WEB-INF/cfusion/lib/updates/c hf9010002.jar
Adobe Driver Version
4.0 (Build 0005)
JVM Details
Java Version
1.6.0_17
Java Vendor
Sun Microsystems Inc.
Java Vendor URL
http://java.sun.com/
Java Home
D:\JRun4\jre
Java File Encoding
Cp1252
Java Default Locale
en_US
File Separator
Path Separator
Line Separator
Chr(13)
User Name
SYSTEM
User Home
C:\WINDOWS\system32\config\systemprofile
User Dir
D:\JRun4\bin
Java VM Specification Version
1.0
Java VM Specification Vendor
Sun Microsystems Inc.
Java VM Specification Name
Java Virtual Machine Specification
==============================
I mean the Update Level is pointing to the old jar file 'chf9010002.jar ' insted of hf901-00003.jar.
Please help.

The update level doesn't always show the most recently applied hotfix jar, this does not mean the hoftix was not applied. As long as you have hf901-00003.jar in this location: D:/JRun4/servers/DevColdF9Secondary/cfusion.ear/cfusion.war/WEB-INF/c fusion/lib/updates/ you should be good to go.

Coldfusion 9.0.1 cumulative hot fix question...

Similar Messages

Maybe you are looking for