Coldfusion server monitor in Japanese: how change language?

Hi,
I have a coldfusion 10 developer edition installed.
In my admin panel I have english language. But my server monitor is in Japanese. I don't know why.
How can I change the language of the monitor?

Hi Giovanni,
There are two ways to change it back to English on server level:-
1) Check your server locale and change it to anything but japanese.
2) Take a backup and rename smresource_en.xml to smresource_jp.xml in CFIDE\administrator\monitor. Restart ColdFusion.
Regards,
Anit Kumar

Similar Messages

Server Monitor Notifications - Drive Status Changed - Time Machine

I'm using an Xserve as a file server for a small workgroup . It has a Raid 1 set which is being backed up via Time Machine to an attached disk array.
Whenever Time Machine runs (every hour), I get two notifications from Server Monitor that the drive status has changed:
*Reason(s) for notification:*
*Drive status changed*
The timestamps on the notifications coincide with these messages in system.log
Feb 2 11:28:05 ciesaxserve2 Server Monitor[854]: * _NSSocket.m:243 read() failed; socket=0x197060 error=(NSPOSIXErrorDomain,61)
Feb 2 11:28:05 ciesaxserve2 Server Monitor[854]: * _NSSocket.m:243 write() failed; socket=0x197060 error=(NSPOSIXErrorDomain,61)
Feb 2 11:28:05 ciesaxserve2 Server Monitor[854]: * _NSSocket.m:243 read() failed; socket=0x2090e90 error=(NSPOSIXErrorDomain,61)
Feb 2 11:28:05 ciesaxserve2 Server Monitor[854]: * _NSSocket.m:243 write() failed; socket=0x2090e90 error=(NSPOSIXErrorDomain,61)
and:
Feb 2 11:28:55 ciesaxserve2 servermgrd[78]: servermgr_backup: TimeMachinePostBackupHook called.
Feb 2 11:28:55 ciesaxserve2 servermgrd[78]: servermgr_backup: TimeMachinePostBackupHook done.
The notifications simply report that all is normal, and the number of available drives goes from 6, to 7, back to 6. Something to do with making the backup volume available, I presume.
I would like to disable these specific messages. I realize I can disable all messages from server monitor regarding disk statuses, but then I would be turning off messages about failures and actual problems.
Is there a config I can edit which will only alert me to actual problems? I'd like to stop getting 48 emails each day; reduce the noise and increase the signal.

I know this post is old but this has recently cropped up for me. I have been backing up with Time Machine for months without a single alert. It started happening after I replaced the failed battery on my RAID card. A coincidence...however the prolonged down time surely caused an SMC (and perhaps PRAM) reset which I assume triggered the change in behavior.
I've pinned it down to Time Machine backing up service settings, in particular the Open Directory archive. Time Machine backs up all the service data independently from the rest of the data on your server startup volume.
http://support.apple.com/kb/ht5139
You can see this data in Terminal.
serveradmin$ cd /Volumes/[YourBackupVolume]/Backups.backupdb/[YourServerName]/Latest/[YourBootVolume]/.ServerBackups
serveradmin$ ls -al
total 16
drwxr-xr-x@ 2 root admin    68 4 Jun 14:44 (null)
drwxr-xr-x@ 14 root admin   476 4 Jun 14:44 .
drwxrwxr-t@ 43 root admin 1462 4 Jun 14:43 ..
-rw-r--r--@ 1 root admin    37 4 Jun 14:44 .serverBackupSignature
drwxr-xr-x@ 2 root admin    68 4 Jun 14:44 addressBookServer
drwxr-xr-x@ 2 root admin    68 4 Jun 14:44 calendarServer
drwxr-xr-x@ 5 root admin   170 4 Jun 14:44 iChatServer
drwxr-xr-x@ 6 root admin   204 4 Jun 14:44 mailServer
-rw-r--r--@ 1 root admin 3826 4 Jun 14:44 master.browse.plist
drwxr-xr-x@ 4 root admin   136 4 Jun 14:43 openDirectory
drwxr-xr-x@ 61 root admin 2074 4 Jun 14:44 serverSettings
drwxr-xr-x@ 23 root admin   782 4 Jun 14:44 sharePoints
drwxr-xr-x@ 8 root admin   272 4 Jun 14:44 webServer
drwxr-xr-x@ 2 root admin    68 4 Jun 14:44 wikiServer
If you take a look inside the openDirectory folder you should see this:
serveradmin$ cd openDirectory
serveradmin$ ls -al
total 81936
drwxr-xr-x@ 4 root admin       136 4 Jun 15:32 .
drwxr-xr-x@ 14 root admin       476 4 Jun 15:33 ..
-rw-rw----@ 1 root admin 41947136 4 Jun 15:32 ServerBackup_OpenDirectoryMaster.sparseimage
-rw-r--r--@ 1 root admin       249 4 Jun 15:32 openDirectory.browse.plist
The ServerBackup_OpenDirectoryMaster.sparseimage contains an archive of your Open Directory database like the one you create from Server Admin. The only difference is that it appears to be unencrypted. This is a bit worrying since Snow Leopard, as far as I know, does not have an option to encrypt your Time Machine backup. This image seems to invisibly mount whenever a Time Machine backup is triggered. This can be verified by checking /private/var/log/system.log and filtering for backup
serveradmin$ tail -b 100 /var/log/system.log | grep backup
Jun 4 16:00:56 yourservername com.apple.backupd[25117]: Starting standard backup
Jun 4 16:00:56 yourservername com.apple.backupd[25117]: Backing up to: /Volumes/YourBackupVolume/Backups.backupdb
Jun 4 16:00:56 yourservername servermgrd[75]: servermgr_backup: TimeMachinePreBackupHook called.
Jun 4 16:09:26 yourservername servermgrd[75]: servermgr_backup: TimeMachinePreBackupHook done.
Jun 4 16:09:44 yourservername com.apple.backupd[25117]: No pre-backup thinning needed: 4.60 GB requested (including padding), 8.40 GB available
Jun 4 16:10:14 yourservername com.apple.backupd[25117]: Copied 744 files (364.4 MB) from volume YourBootDrive.
Jun 4 16:10:14 yourservername com.apple.backupd[25117]: No pre-backup thinning needed: 4.09 GB requested (including padding), 8.04 GB available
Jun 4 16:10:17 yourservername com.apple.backupd[25117]: Copied 87 files (877 KB) from volume YourBootDrive.
Jun 4 16:10:18 yourservername servermgrd[75]: servermgr_backup: TimeMachinePostBackupHook called.
Jun 4 16:10:18 yourservername servermgrd[75]: servermgr_backup: TimeMachinePostBackupHook done.
Jun 4 16:10:18 yourservername com.apple.backupd[25117]: Starting post-backup thinning
Jun 4 16:10:29 yourservername com.apple.backupd[25117]: Deleted backup /Volumes/YourBackupVolume/Backups.backupdb/yourservername/2013-06-03-155910: 8.40 GB now available
Jun 4 16:10:29 yourservername com.apple.backupd[25117]: Post-back up thinning complete: 1 expired backups removed
Jun 4 16:10:29 yourservername com.apple.backupd[25117]: Backup completed successfully.
You can see at 16:00:56 Server Manager got a call from Time Machine to start the services backup and finished at 16:09:26. Open Directory would have been backed up during that process. Take a look at /private/var/log/hwmond.log
serveradmin$ tail /private/var/log/hwmond.log
Tue Jun 4 16:08:36 BST 2013 - Number of drives change from 4 to 5.
Tue Jun 4 16:08:48 BST 2013 - Number of drives change from 5 to 4.
You'll see that both drive change warnings from Server Monitor occured just before the services backup completed. You can also use the sudo diskarbitrationd -d command along with tail /private/var/log/diskarbitrationd.log in another terminal window, trigger a Time Machine backup manually and watch this disk image mount during the backup process. Compare the mount times with the above logs to see if they all match up.
Although I have discovered the cause (which thankfully seems harmless) I have not discovered a way to stop it from generating pointless alerts. I'll post here if I figure it out. I am in the process of upgrading all of my servers to Mountain Lion so it may be a moot point. I am hopeful this information may help someone out there even though it is thoroughly out of date.
Scot

How change language

Hi all. I have short question. In my work I use Mac OS X Leopard in english language, of course I use iWork 09 and right now I working with english interface. My question is how change interface language on example polish language, and keep english language in Mac OS X. Any know how do this?
Thanks

In the Pages Info on my English language OSX 10.5.6 all the languages are spelled out in full, not abbreviated as in the above example, which is in Tiger.
Also all the languages are checked but that doesn't change your menus and Pages' GUI. To do that you will have to go to the +System Preferences > International…+ and change your language to Polski by dragging it to the top of the list.
I have done this before for Norsk Bokmål. Be careful it does change the language throughout Pages but odd things happened when I tried to change it back. The Norsk stuck in some of the palletes like the Media Browser and I eventually had to restart my computer to shake it off.
You may have better luck.

How change language to Spanish in Pages 09

I need to change language frecuently in pages, key note and works. But I haven´t found the way.
Help is welcome

You select the text you want to be Spanish or French and make it the language you want in the Text Inspector.
It is then part of the Text style. If you want you can make a Paragraph Style which has the language as part of it in the Styles Drawer.
Peter

[SOLVED] How change language in Cinnamon Desktop Environment

Hi,
I wanted to change the language of cinnamon but I do not see any option to change the language. I have installed cinnamon-translations.
Thanks for all help
Last edited by formoza (2014-08-01 20:00:31)

Things changed recently with the introduction of the "mintlocale" package in Linux Mint, which now handles this in Cinnamon.
For now, to add new locales you need to still use the /etc/locale.gen and locale-gen way of adding them.
To change language used, you need the mintlocale package installed.

How change language in full dokument?

Hi,
I work in CS2 (Win XP) and started making a booklet in Swedish. Not until I finished I realised that my (English) CS2 had the default language English UK selected. Is there any way to change the already written text to Swedish in one swoop? I can mark the text (in each textholderframe) and change it but it takes time so I'm looking for a shortcut. Anyone knows how?
Thank you!

You can use Replace for that.
In the Find Format, select "English UK" in the Advanced Character Format panel. In the Change Format, select Swedish. Be sure there is *no text at all* in the two edit boxes (there might be a space somewhere) and that the search range is set to Document. Press "Change All". Done.

How change language settings in add-ons? FF mostly gives german directions; want to change it in dutch

I'm using FF 3.6.12, and I'm using about 10 add-ons; they all give directions in the German language; I want to change that in Dutch; please help! thanks in advance

<p>Hello andon,<br /><br />Please re-download Firefox from the Mozilla.com website and try to install it.</p>
# Go to [http://www.mozilla.com/en-US/firefox/all.html the Firefox site for international versions] and re-download the desired installation file.
# Open your download directory, then double-click on the downloaded installation file.
# Go through the Firefox installation wizard to complete the installation.

Starting the ColdFusion Server Monitor

This question was posted in response to the following article: http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf363cdd-7ff1 .html

I have just the same problem as you have. AND what's worst is I have done the unlock step for the odm and odm_mtr account, I still cannot "exec DM_START_MONITOR" in the sqlplus environment.
Would anyone please help me to solve this problem!
A throusand thx!
Alex

Coldfusion 9 Server Monitoring - Can't find "Last Error" log

Hi,
Perhaps this is a stupid question, but I cannot locate where does Coldfusion write all the error details that it reports under "Last Error" in Coldfusion Server Monitor.
I am trying to get to the bottom of a pesky error message, but can't get any more information on it without looking at the actual logs. I tried application.log but errors there are very very old and not the ones that CF Monitor is reporting.
Here is the screenshot of what I mean:
Thanks for any suggestions!
Sasha.

Hi Sasha,
There are no such things as stupid questions tho there are dumb answers, hope this is not one of the latter.
There are two ways. Double click under Reports - requests with errors.
Or select Statistics tab > Errors menu > request with errors.
HTH, Carl.
PS
this may help CF dev week event -
http://www.adobe.com/devnet/coldfusion/events.html
Watch the excellent recorded session by Charlie Arehart on understanding CF Monitor:
http://www.adobe.com/cfusion/event/index.cfm?id=1886254&event=register_no_session&loc=en_u s

Change language programming

how change language programming

how change language programming
I'm guessing English is probably not your first language and hence posting in English is probably rather difficult.
Unfortunately, it's impossible to tell what the question is.
If you say have vb and want c# then there are online translators. But they're not very reliable and re-writing yourself is usually better.
If you have a solution which is c# and you want to use some VB in it.
You can't in the one project but each project in a solution can be different languages. This is because they are essentially compiled separately. Each project is compiled to an exe or dll.
You can therefore have as many languages as you have projects in a solution.
If you mean how do you learn a different language.
You already have a head start in that everything use .net libraries so the methods and classes are the same.
You "just" have to learn the rest of the language and I would suggest video training if your English is up to it ( pluralsight is good ) and or a book.
It took me a week to transfer from vb.net to c#.net. Admittedly, I had already done some pascal as part of my degree and know a number of other languages but it was pretty easy to pick up.
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML

How to change language of the server monitor ?

hi all,
How to change language of the server monitor ? i got it in japanese and would like to turn it into English.
Thx for your help,

We use japanese strings only when your server locale has "jp": FindNoCase("Japan", GetLocale()) NEQ 0. So you may not be able to individually change server monitor's flash client, but there are two ways to change it back to english on server level
1) Check your server locale and change it to anything but japanese.
2) Rename smresource_en.xml to smresource_jp.xml in CFIDE\administrator\monitor (take a back up).
Thanks,
Chandan Kumar

SQL Server reporting (SSRS) with SCCM. Language issue - how to change it?

My SCCM 2012 R2 server is setup on a Windows 2012 R2 server (English) but has non-English language pack installed.
I have the server working great with SCCM 2012 R2 working in English.
The reporting has turned out to be a bit of an issue as it is displaying the paths in the other language.
For example if I browse to http://servername/ReportServer and click to view the available reports the links are all non-English.
Also, if I go to the ConfigMgr console -> Monitoring -> Reports the names appear in English but if I click on any of them to view their properties and go to the security tab I can see the path is not English.
I want to, for the sake of some of the people that will be viewing/using the reports, change it into English.
Is there any relatively painless way to do this?
Changing the language preferences in Internet Explorer does not affect it as these appear to be hard coded.
Appreciate any advice. Thank you.

Thank you. I had previously seen that page but unfortunately it did not resolve my issue.
It is quite frustrating as I can see the actual folders on my server in English (C:\Program Files\SMS_SRSRP\Reports) yet in the browser the folder names and URLs appear not in English.
Also looking at Reporting Services Configuration Manager it does not show any option to configure this. Arg!

Somehow i have changed the language readout on my IPod to Japanese-how do i get it back to English?

somehow I have changed the readout language on my IPod to Japanese-how do I change it back to English?

Click here and follow the instructions.
(64102)

Wiki server 4.0 (Yosemite): how to change wiki language?

Hi,
I upgraded to OS X Server 4.0 (Yosemite). My wiki before was in Dutch and had Dutch buttons for Home, Activity, Documents, Trgas and blog. Now they're in English. How and where can I change this english language to another, e.g. Dutch.
My OS language and OS X Server language on the Mac itself are still Dutch, the wiki isn't.

Can you name ANY other software where a user is expected to start messing with system files to do a simple task such as to change language?
Yes, OS X 10.6 requires you to either mess with such files or download a 3rd party utility to run any app in a localization other than that of the OS. (It was easier in 10.5, however.)

How do I change language back to english from japanese on iPhone 4 iOS 5?

I'm testing an application's language support and changed language from english to japanese on my iPhone 4 w/ iOS 5 installed. I can not figure out how to change the language back since I do not speak japanese and the interface options are different in japanese.

Nevermind this. I found my answer much faster elsewhere. Come On PEOPLE!
If you are looking for an answer to this question you will find it at the link below.
http://www.askdavetaylor.com/change_iphone_4_from_japanese_back_to_english.html

Coldfusion server monitor in Japanese: how change language?

Similar Messages

Maybe you are looking for