Color box change with sensor value

how can i use a color box to display a sensor value..? i tried but it's just dark blue to light blue..
e.g if i have a distance sensor the colour box will change gradually from red to green(perhaps and yellow for the middle) for a value from 0 to 255.. 
Thanks 
Solved!
Go to Solution.

This one works too.
Tim
Johnson Controls
Holland Michigan
Attachments:
Color Box Example.vi ‏10 KB

Similar Messages

  • How to use value in a drop-down list box as "With these Values" parameter?

    Hello, new user.
    I have a drop-down list box on Page 1, upon which the user can choose a study number. The List Box is named "P1_STUDY_NBR".
    Then I have a list, one entry of which goes to my master-detail form, which is Page 6. I would like it to go to the study number that the user choose on Page 1.
    In my target on the create/edit list entry, I put in "Page in this Application", "Page 6", then in Set these items, I put in
    P6_STUDY_NBR
    My question is what to use in With these values, where I want the contents of the P1_STUDY_NBR. I tried:
    &P1_STUDY_NBR
    and that does not work. If I put in one of the study numbers, like 336-00, then it does work, but I want it to pass the study number the user chooses in the list box. How do I refer to the contents of P1_STUDY_NBR?
    -Mary

    Yes, that does work, thanks. I'm now getting the default value I was putting in yesterday rather than an error message, so there must be something loading it, but I'll hunt around for what process might be doing that, or try re-creating the master-detail form again.

  • Do you need to use async with sensor values to be able to use them in another method?

    I have this code but when button click event is triggered sensor data stops being up dated. I would like the rotation to be constantly displayed.
            public void OnSensorChanged (SensorEvent e)
                if (e != null)
                    rotationEditText.Text = e.Values [2].ToString("0.0");
            public void button_OnClick (object sender, EventArgs eventArgs)
                 Thread.Sleep(5000);

    I have two tasks that I'm trying to accomplish,
    Calibrate Button click event reads phone orientation, waits one second, reads phone orientation, waits one second and then reads the phones orientation for a third time. In this event it will only record the orientation if the readings are within a percentage
    range. This is to ensure the phone is stationary and recorded orientation is very accurate.
    Recording Button click event is a lap timing method where the accelerometer and orientation readings will be recorded with the lap times.
    In both cases the sensor readings need to be accessible in another method.
    I tried changing the public void OnSensorChanged(SensorEvent e) to async but then it through an error saying there was no OnSensorChanged event.

  • Color Settings change with resizing Photoshop window

    I have been seeing a weird phenomenom with Photoshop lately and I hope someone can help me figure this out. I have been editing photos in Lightroom. I occasionally take a photo into Photoshop for more editing and when I do this, if I make any change to the program window side, the color changes to a darker, more muted looking photo. If I minimize the program, nothing changes. If I either change the window size to a smaller, non-maximized window or drag it to my secondary display, the color changes to what I am guessing is a different color space. The only way to fix this is to shut down Photoshop and restart it. I am sure this is some setting in Photoshop color settings, but not sure. Should I have my color settings set to my monitor calibration file or should it be Adobe RGB? Not sure what Lightroom edits in. I do have it set up to send the file to Photoshop in Adobe RGB.
    Any help would be appreciated.
    Thanks,
    Toby

  • Color Balance Changed with Update

    I have some HD Test pattens that I use to calibrate my video projector with via my AppleTV and my Win7 computer. Both are connected to the projector via HDMI though a switcher unit. The Projector sences a different input when the swithcer is changed allowing me to set indivigual balance levels for the ATV or Computer.
    Unit the update the settings were very close between each unit. The Win7 machine has perfect color balance through Red Green and Blue filters. The ATV was never perfect but very close.
    Since the update, and here nothing has changed except the update, the ATV colors are well off running the same test signals. The RGB levels are out. I have tried each of the 3 signal feeds from the ATV in the settings menu, but nothing.
    The colors now seem to be too vibrant and look false. I can componsate for this in the projector, but why did it change?
    Has anyone else noticed this? Again all that changed was the update!!
    Nathan

    The closest I could getting it back to the same colors before the upgrade is changing it to the RGB Hi setting, and limiting the HDMI Color in my projector to Limited, then adjusting the Brightness very slightly. Everything now is much closer to the correct color balance through Blue test glasses. Still not as perfect as it was, or running off my Win7 machine.
    Nothing has changed in my setup apart from the ATV Update. Do they not check this stuff!!
    Nate

  • Report layout changes with  the values in it

    I he a standard report, but i want certain report rows to show up in red when a value of the row is null.
    I know you have to use different templates, but how or where do i need to put the condition to change report row templates?
    Thanks

    Use multiple row/column templates (there are up to 4 available in a report template), controlling which is used via the Row/Column Template 1 Condition and Row/Column Template 1 Expression etc, depending on whether it is a named column (row) template or a generic column template.
    http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/themes.htm#BABFFGGJ

  • How to Sort Dimension in Pivot Table via Order Column which is changing like Factual values

    Hi,
    Recently in of our product offerings we got stuck on this following question:
    How to Sort Dimension based on the Order Value which Keeps Changing with Factual Values??
    We have a data source laid out as (example)
    In the above the “Order” columns are changing per
    Company/(DimensionA) for DimesnsionB.
    Instead what we want is: (But only if we can get the following result without putting the “Order” Column in the “Values” Section. 
    If there are any configurations that we can make to our power pivot model for the similar data set so that the
    DimesnionB in this case can be sorted by the Order column, would be greatly helpful to us. 
    Sample File:
    http://tms.managility.com.au/query_example.xlsx
    Thanks
    Amol 

    Hi Amol,
    According to your description, you need to sort dimension members in Pivot Table via order column, and you don't want the order column show on the Pivot table, right?
    Based on my research, we can sort the data on the Pivot table based on one of the columns in that table, and we cannot sort the data based on the columns that not existed on the Pivot table. So in your scenario, to achieve your requirement, you can
    add the column to pivot table and hide it.
    https://support.office.com/en-gb/article/Sort-data-in-a-PivotTable-or-a-PivotChart-report-49efc50a-c8d9-4d34-a254-632794ff1e6e
    Regards,
    Charlie Liao
    TechNet Community Support

  • Is it possible to change color of slider on different values?

    I'm trying to set up an instrument that receives data from a sensor. My idea is to show a sliders with the values read and accordingly  represent acceptable levels in one color and whatever is above it on a different color (lets say green and red).
    Any ideas would be appreciated.

    You're going to have to use a Property Node for the slider to change it's color.
    The attached VI shows a simple example of how to do this.
    Right click on the indicator and select 'Create>Property Node'.
    Right click on the property node and select, 'Change to Write'.
    Right click on the node again and select 'Properties>Fill Color' (or other property you want to change).
    Create the logic to watch for the value over limit.
    You do have to be careful using property nodes. They are very useful,
    but they also have a performance hit on your application. You should
    construct a way to only write to the node when you need to change
    something. Constantly writting the same value to the node (as my quick
    example is doing ) is not good programming practice.
    Ed
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
    Attachments:
    Change Slide Color.vi ‏23 KB

  • How to Change a Default Value from Drop Down Box displayed in Web Dynpro?

    Hi,
    How to Change a Default Value from 'High' to 'Low'  in a Drop Down Box for RANGE field displayed in Standard Web Dynpro Component.  I saw a Default Value set for a RANGE field  in View Context When I select that field and click on Display. I am seeing Default Value set it to 'HI'. Please let me know how to change from HIgh to Low.
    I appreciate your help!
    Thanks,
    Monica

    hi,
    use the set_attribute( ) method now to set the attribute with a particular key eg HIGH in ur case
    // u can use the code wizard( control +f7) this code will be auto generated when u select the
    //radio button to read the context node
    DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
      DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
      DATA ls_cn_node TYPE wd_this->element_cn_node.
    * navigate from <CONTEXT> to <CN_NODE> via lead selection
      lo_nd_cn_node = wd_context->get_child_node( name = wd_this->wdctx_cn_node ).
    * get element via lead selection
      lo_el_cn_node = lo_nd_cn_node->get_element(  ).
    * set single attribute
      lo_el_cn_node->set_attribute(
          name =  `ATTribute name.`
          value = 'LOW' ).
    it will solve ur query ..
    also refer to this component
    wdr_test_events -> view dropdownbyidx and dropdownbykey ->method name onactionselect.
    regards,
    amit

  • Color ramp not changing to reflect interactiv​e seting of hi/low color boxes

    This is using the colorramp associated with the intensity graph, but it's also true of the basic colorramp in Controls->CLassic->Numeric. The colorboxes change color, but the ramp itself remains the default black-to-blue interpolated scale. (labview 6.1, Windows 2000)

    > This is using the colorramp associated with the intensity graph, but
    > it's also true of the basic colorramp in Controls->CLassic->Numeric.
    > The colorboxes change color, but the ramp itself remains the default
    > black-to-blue interpolated scale. (labview 6.1, Windows 2000)
    >
    The color ramp has a number of colors that control its appearance, up to
    about 256 of them. The top and bottom colors are actually the above and
    below colors. In otherwords, if your scale goes 0 to 100, the below
    color is for intensities below 0 and the above color is used only for
    values above 100. Using autoscaling for the Z scale, you will not see
    those colors unless you start zooming in by manually changing the Z
    scale values. The intermediate colors are set by righ
    t clicking on the
    markers on the scale. Right click on 100 and there should be a menu
    item for Color which will let you change its color. Ditto for 0, and
    for any intermediate markers. You can add intermediates by popup or by
    dragging another marker onto the scale. You can also drag the
    intermediates or type into them to change their location.
    Greg McKaskle

  • Color conflict when printing text boxes layered with images

    Thank you in advance for any insight on this question. I've got a text box grouped with an image in a Pages document. The text box is layered in front of an object and is transparent (no fill color in the text box). The object however, is filled with a color. When printing the document, the image comes out in two shades of blue even though the text box is transparent. Thoughts?

    Want to add that if you uncheck the Retain Slide Quality Settings, you'll have to keep the High setting.
    Another way to change slide quality is before publishing, and in that case I prefer Optimized to High (which is not possible when overriding the Slide Quality on publishing, there you only have the choice between Low and High).
    Still I'm puzzled because the simple TEB normally do not cause that kind of quality issue, have seen it happening with shapes (because they have transparent pixels) and images, but with TEB's? Wondering
    Lilybiri

  • Elements 11 Problem with Foreground box changes

    I just got off the phone with 2 tecs trying to figure out how to make my black and white box changes work.  I am having issues with layers.  The Tecs could not hlep me.  Anyone out there knowledgeable?

    I guess you are working on a grayscale image or a mask , that is why you are unable to choose any color for the foreground and background box and it for that reason it seems to you that they are not working. Choose "Image Menu>Mode>RGB" in case you are working on a grayscale image. In case working with layer mask , then choose the layer.

  • 3D active-x color table does not match color box ctrl values

    I am having a problem. I want to allow the user to control the background color and plot colors on the active-x 3D graph in labview 7.1.1. I am using the standard color box ctrls in labview to allow the user to pick, but the colors do not match. When I pick blue (0,0,255), it comes up red (255,0,0). When I choose yellow (255,255,0), it comes up cyan (0,255,255), and vice-versa. Black and white seems to work correctly, as well as green (0,255,0) being right in the middle. I am assuming this means whatever algorithm NI is using to create the color value is not the same from the labview side to the active-x control side. Anybody else run into this, and have a solution?

    Thanks John.
    Kind of funny, I ran off and built a sub-vi with the exact same guts as the OLE vi, but from looking at what the RGB vi did to break it down.
    I would say though, they need to make a common sub-palette to deal with color issues. They have the same two RGB VIs located in two different spots, and this OLE one is in yet another. I think I would have looked under the Active-X sub-palette before I looked under the 3D graph palette (mainly because those are junk anyway, they barely give you any functionality).
    Anyway, problem solved, thanks again.
    Attachments:
    rgbChannelSwap.vi ‏18 KB

  • The "Apple ID Password box along with the keyboard keeps popping up on my iPad and stays there.  I have changed my email address on my iMac but my old one still remains on the iPad.  Also changed password.  Nothing works!  I can't use the iPad like this!

    The "apple ID Password" box along with the keyboard pops up when I turn the iPad on and it stays there.  I have changed my email address on my iMac and also changed my password.  The old email address is still on the iPad.  Anyway, I can't use the iPad because can't get the apple id password box to go away.  Thanks for any help!

    This is an older photo but the sleep and home buttons are still in the same place on all iPads. The home button is the round button at the bottom of the iPad and the sleep button is also called the on/off button and it is at the top right corner of the iPad.

  • With IOS 7.0 How do you change the Color Red, that shows up on the Calendar to another color? People with certain eye problems cannot tolerate the color Red.

    How do you change the Color Red, that shows up on various points of the Calendar to another color? Persons with certain eye problems have visual irritations that can be caused by the color Red. This problem came up with the update to IOS 7.0.

    Sorry but you cant

Maybe you are looking for