Color Looks won't work in Color

Hey,
I just found out that Apple has a place to download some preset looks for Color - which they call "Color looks". I downloaded the file, saved it to the desktop and moved it to the same area as my other Color FX.
When I go into the FX tab in Color, I can see the file and all of the individual looks. But when I try to apply one, my preview screen turns black.
Does anybody know what's wrong? Or how I can troubleshoot this?

The COLOR 1.5 pre-builds are node trees that follow exactly the same construction as those supplied with previous versions. You will get exactly the same experience, except the new ones are a little bit more elaborate and in different shades, in case whoever is using them can't figure out how to make a warm tone or a cool tone.
The reason for the similarity is because the same guy built them all, but you might also investigate his "Scone Looks" (which might also be explicitly built for 1.5, come to think of it). He's advertising heavily on the Creative COW -- search for Bob Sliga.
I never use any of them -- as Mark Twain put it, the difference between the "right" word and the "nearly right" word is the difference between "lightning" and "lightning bug"....
and if you are working with interlaced footage, then you have to do it all twice.
jPo

Similar Messages

  • Color replacement tool won't work at all

    Hi, I am using photoshop CS3 in 10.6.2. The color replacement tool is not a tool I have much experience with, but am wondering why it won't work at all. I have reset the tool to its default preferences and tried using it on multiple documents and with different users and it just won't work. Nothing happens at all. I have watched some tutorials on using the tool and it looks easy enough and quite straight forward to use. I have tried every setting for the tool and still nothing happens. I am working on the top layer and have not selected anything. I have tried merging all the layers onto one layer incase the tool wasn't working because it would only replace the color of what is on a layer.
    Thanks for your help.

    The mode is color. The sampling is continuous and the limits are contiguous. These are the default settings for the tool.
    I am noticing that the tool does work a little. I created a new document with 3 layers. The bottom layer is a white background. The middle layer has a blue square on it and the top layer is blank.
    I notice that the color replacement tool won't work on the white background layer or the top blank layer, but only works on the middle layer. Does the tool only work on  the same layer that has a color you are trying to replace?
    When I hit the command option shift  E keys to merge the layers into a copy, the tool only worked on the part of that layer that had the rectangle drawn on it and ignored the white part of the image.

  • HP LaserJet Pro C1415fn color MFP - fax won't work

    I have a LaserJet Pro CM1415fn color MFP on a Windows 7 64-bit laptop. I've been using the printer for two years now.
    At the moment the fax function only works if I use it manually (i.e. if I place a sheet of paper on the scanner, select the "Fax" button on the printer touch pad and dial the number). However, if I want to send a fax via the PC interface, it won't work.
    For example, if I open a PDF, click on "Print" and select "HP LaserJet Professional CM 1410 Series Fax", nothing happens -- no window/interface will open. If I select "HP Send Fax" or "HP Fax Setup Wizard" from the program menu, nothing happens.
    I've always been sending faxes this way and I just don't know what happened... Can anyone please help?
    Thanks in advance!
    Claudia

    Hi @Clabee ,
    I see that you can't fax from the PC anymore. I can help you with this.
    If this just recently happened, I would do a System Restore back to when everything was working properly.
    System Restore for Windows 7.
    If you would prefer not to do the System Restore, uninstall and reinstall the printer software. It might become corrupted.
    Here are the steps to run the uninstall from the computer or the CD.
    To uninstall from program files:
    Touch the Windows key and the E key to access the computer window.
    Select the C drive.
    Select program files or program files x86.
    Open the HP and printer name folder.
    Select uninstall.
    Uninstall the software from the CD:
    Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
    Disable all the start up programs and temporarily turn off the Antivirus Software. How to use MSCONFIG .
    Click on the start up tab and click disable all.
    Download, save and install the latest drivers.
    HP LaserJet Pro CM1415fnw Color Multifunction Printer Drivers.
    Test the printer and try sending a fax again from the PC.
    Then you will need to go back in and enable the start up programs and turn the Antivirus Software back on again.
    If you need further assistance, just let me know.
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Color printing won't work

    This is truly vexing. First time I have encountered anything like it. Any help would be much appreciated.
    When using Acrobat X with an Epson LP-S4500 printer, the color printing won't work. It works with Acrobat Reader on another computer. I didn't think to test printing with another program on my computer. It's worked fine when I tested one page as a PDF print. It's been so long I'm not sure if the print black and white or grey-scale option is usually available but I can't image why it wouldn't be. There is no such option in my printing panel. I went into advanced settings and changed it from the default grey scale (again, have no idea why that is the default) to Adobe RGB and even though the preview shows color, the print itself still comes out in grey-scale.

    Es handelt sich hier um einen Canon iR C3080.
    Betriebssystem Client: XP
    Betriebssystem Server: Windows 2003 R2
    Die Einstellungen standardmässig auf Farbe: Auto, ich habe Sie noch auf Farbig eingestellt, das er explizit jedes Mal in Farbe druckt.

  • Anybody ? my CC color themes won't work

    When im trying to load my cc color themes it won't work.
    It says "unable to connect to the adobe server, you're either offline or the server is busy"
    God damnit !!

    Sarah,
    It may be related to this, so hopefully it is temporary.
    I'm getting a server error while trying to upgrade

  • Looking for version 2.2 for my 1G touch, since 3.0 won't work on my 1G.

    I have a 1st gen. iPod touch that I got for Christmas. Due to a lot of circumstances, I didn't update to 2.2 yet. I am still running on version 1.1.5. I would really like to get 2.2 or even 2.0 so that I can use apps, but I can't find any of these on the apple website. I can only find the new 3.0 version, which is incompatible with my 1st gen. touch. Has apple forgotten about 1st gen owners? Where is the iPod OS 2.2 or even 2.0? Any help would be very much appreciated. Thank you.

    I can only find the new 3.0 version, which is incompatible with my 1st gen. touch.
    Apple hasn't forgotten 1st gen owners. The iPod touch update 3.0, is definitely compatible with 1st gen models. I have updated mine. It works with ALL models. Only the Peer-to-Peer gaming and Stereo Bluetooth functions won't work on the 1st gen.

  • My enter button and web search orb won't work only on my homepage. Works everywhere but there. We have Yahoo for a homepage. What should I do?

    We have the at&t/yahoo homepage fixed where we can check our other email account. On this page, I have just a color theme and all of the news items disabled. We have had this for three years now. Just a few days ago we noticed that when we use the search bar that is included in the middle of the page that the enter button won't work. I usually type and hit enter as opposed to clicking on the mouse button. I do have the search assistant on. I tried to disable that, but it didn't help. I have a couple of other search toolbars and they work fine with the keyboard. It's just convenient especially for my husband to have it this way. I have searched the internet for several days and have come close to what I thought would be the answer but nothing has worked yet. Most of the questions/answers were old anyway. It might not have anything to do with Firefox, I just didn't know where else to ask questions too.

    Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?

  • Non-HP cartridges won't work. HP screws the consumer!

    I belive HP has shafted the consumer.  I heard there was a software that locks out non-HP replacement cartridges from working.  This FORCES you into buying thier highly expensive products.
    I went to Fry's and they refilled my 950 cartridge and even changed the chip.  It still won't work.
    Any way around this?  I like the printer but the cost of HP ink products is rediculous.  If you get the "kit" with all colors + blacks, it's about $100.  I can get TWO replacement kits for about $35 online.
    nice work, HP.

    Hello @zidcfii, 
    Welcome to the HP forums.
    I understand that you are concerned about not being able to use non HP ink in your Officejet 8610.
    I would like to bring your attention to the following post by Ciara_B.
    Original HP cartridges and why they matter
    If the cost of ink is a concern you should look into the Instant Ink program.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Flash is up-to-date, but Plugin won't work

    Hi!
    I'm using Firefox 29.0.1 on Windows 8, (also up-to-date), and Flash plug-in won't work. I re-downloaded & installed Adobe Flash 13.0.0.214...I verified it on their website, but I can't get the plugin to work. I had no problem with it earlier today, but for some reason it won't work anymore.
    PLEASE HELP!
    Thank you,
    Nuts4Mutts :(

    Hi!
    Yes, I checked on Adobe's site THREE TIMES & I have the latest version, & the animations they have on their site worked fine...I saw them perfectly, (both the red cube bouncing around & the cartoon tree with the animated yellow & orange colored leaves). I'm at a loss why on most sites I have no problem watching streaming video, but on 2 of the other sites that I watch EVERY day, I suddenly get the "Error loading plugin" message on a black screen. It's driving me nuts, as I was watching these sites earlier this morning & everything was fine. The confusing part, to me at least, is why is this plug-in problem is ONLY affecting 2 of the sites I watch AND why did it happen out of the blue...I was watching them without any problem early this morning, just like I do ALL DAY...EVERY DAY!!! (I watch several wildlife live-cams, so it's important that I keep up with changes in the birds I normally watch). None of the other sites I watch are affected...what would cause this to happen?
    I even did a complete shut-down of my laptop, waited, then re-started. Usually, this would fix just about anything...for some reason, I can't get the video stream on 2 cams...I can still view the other cams I watch, though.
    I DID install MS's weekly updates, but it didn't affect my ability to see streaming video on most of the sites I watch; so far only on 2 of them.
    I only have the pop-up blocker that comes with Firefox, but other than that there's nothing else in my add-ons that could interfere. I checked my plugins several times, just to make sure Flash was up-to-date & they're fine, too. The mystery is why I can see my wildlife cams on 4 of the sites I watch but not on the other 2, especially when I was watching them early this morning!!! I feel like I've been dropped-off in some sort of cyber-space time warp, or in the twilight zone & I'm ready to scream!
    If there are any other suggestions, please post them...I'm very behind in my cam-watching!
    On another Firefox-related problem...where do I post a question about some add-ons not working or being visible AND not being able to customize since the last update? I know...I'm just having a very confusing, frustrating day!
    Thanks again for your ideas...I need all the help I can get!
    Nuts4Mutts :(

  • HP LaserJet printer won't work following update

    I have just installed the latest Apple update for HP Laserjet printers (9 Sept 2008), and now my HP 2605dn color LaserJet printer won't work. Most applications just quit when I try to print; MS Word just hangs at the dialog box when I press Enter.
    I can access the printer utility OK via the Print Preferences.
    Has anybody any thoughts why this should be so, and how do I proceed to get my printer working again?
    Thanks.

    OK, I have just answered (part of) my own question.
    Re-installing the HP Laserjet package has duplicated drivers for most of the HP laserjet printers in my list of drivers. If I select the second entry of the two identical appearances of the drivers for my printers, they start working again; if I select the first appearance they don't work. So now my printers are working again.
    This still doesn't explain why Software Update prompted me to re-install an already installed package. It also gives me the issue of removing all the duplicate entries from my list of drivers, unless I am prepared to live with the clutter and waste of HD space. Any thoughts about how to do this without bombing my printers again?
    Thanks.

  • Javascript or applet dropdown menus won't work in IE6, How can I solve this

    I've made some dropdownmenu's of javascript and one of java applets. But they don't work in IE6. If IE6 is installed they won't work either. My friend has IE5.5 and he has no problems with the menus. How can you make them work.
    And how can you change the z-index of a javascipt/applet? How do you make a dropdownmenu that's put in the topframe slide over the mainframe?

    Perhaps someone could help me with the following question:
    I have a menu that cascades out of the Applet box. My question is:
    How do I close the menu without clicking on the Applet box? - i.e. if the user clicks on the HTML area of the WEB-PAGE, or simply waits a second or 2, the menu should collapse?
    I notice that this is actually the default behavior for the AWT classes - but then you can't set background colors etc. I need the same kind of behavior, but using Swing classes.
    Would appreciate any assistance or advice...

  • Navigation won't work on  menu buttons

    Hi
    I created a menu with apple template-light index in DVDSP 2.05 and added (dragged) motion assets (each chapters video clip) to the buttons. I used overlay colors=advanced and mapping type=grayscale for the norma-selected-activated states of the buttons. My problem is the navigation arrows won't work to cycle thru the menu buttons (chapters) when I use simulator. i checked the assignments & everything seems ok..even used autoassign now, no luck. When I created another menu with apple template-light index with no assets dragged to the buttons, the navigation arrows worked fine in simulator. Any ideas on what I am doing wrong?
    Thanks in advance for any help.

    I figured out the problem, so all is good.

  • Really simple question, stop function and scroll bar won't work

    I was working on different parts of this VI separately, when I put them together the scroll bar and stop button stopped working. 
    In the individual VI both are in the while loop. In the final one I was one scroll bar and one stop button to apply to all 5 while loops.
    I tried taking the scroll bar in and out of the first loop to attach it to the rest but it still won't work.
    I'm sure that there is a really stupid simple answer but I've been playing with it for a while.
    I attached the VI that I am working on as well at fake data (to test the color boxes).
    Thanks!
    Solved!
    Go to Solution.
    Attachments:
    trial8.vi ‏95 KB
    trial8.vi ‏95 KB
    0_1024.txt ‏25 KB

    You have a typical beginner problem due to incorrect understanding of dataflow. Run the code using execution highlighting and watch the diagram to see.
    Your stop button is outside any loop and thus will only be read by the code exactly once at the start of the program.
    Your scroll bar is read in the first loop. All other loops cannot start until the first loop has completed and since (1) is true, it will never happen if the boolean is false when the code starts.
    Why do you have so much duplicate code? 95% of the loop code is the same and can be re-used. I am sure the entire thing could be written using 5% of the total code. Put everything in one loop, the iterate over the 2D array to get all the values. Don't forget to place a small wait inside the while loop.
    LabVIEW Champion . Do more with less code and in less time .

  • Adobe CS5 Eraser tool won't work

    My eraser tool won't work on any adjustment layers I add. It will erase on a background copy but not on a curves or black and white layer. It's strange because my brush tools are working and the eraser tool has been working up until now. It's not even showing up on the thumbnail image and my opacity is set to 100 % and I have tried pencil, block and brush tool. The burn and doge tools won't work either.
    I have tried resetting my tools under the drop down menu awa resetting tool preferences, preferences and restarting the program whilst holding down ctrl, alt, shift. I am working on a Microsoft Windows 7 (OS). Everything else seems to be working okay.
    Any help or suggestions would greatly be appreciated
    Tamzyn

    If you paint Black on the Layer Mask, it will mask the effect of the adjustment in the Adjustment Layer.  Likewise if you paint White on the Layer Mask it will cause the adjustment to take full effect.  Grays in between will cause the adjustment to be only partially applied in that area.
    If you happen to have Black selected for the background color, the Eraser tool will act like a brush painting black (and thus hiding the adjustment) when you use it on the Layer Mask.  That's probably what you did to see the Eraser tool work on an Adjustment Layer in the past.
    As stated above, most folks use the brush tool for working on Layer Masks.
    -Noel

  • Card VGA Matrox G200 detected but monitor HP D2826 won't work

    I have an HP Vectra, during installation of solaris 8,he detected my VGA card Matrox G200, but my monitor HP D2826 won't work???? Actually, i work with standart VGA 256 colors.Can anyone help me please?

    The card I linked indicates it needs 450 watts.  This is more of a rough estimate and I'm not certain that a leeway of 50W is enough for the system.  Again, 450W is a rough estimate.  It may just need a little larger power supply, I find that unlikely since the DVI port works without issue. 
    I was inquiring about the motherboard to check if this particular motherboard needed to have the onboard graphics disabled for the discrete graphics card to work, but this can be safely ruled out since the DVI port worked.
    Here is what can be ruled out thus far.
    1.  BIOS settings in the motherboard.  If it was a BIOS setting issue preventing the card from displaying an image, then the DVI port would have not worked.
    2.  The display port on the monitor.  If it was the monitor's display port was at fault, then it wouldn't have worked with the motherboard's display port.
    3.  For the most part, I think it is safe to rule out a weak power supply.  Generally speaking, a video card either works 100% or 0% based on whether or not it has enough power or not enough power.  Not enough power doesn't typically cause certain video ports to work and others not to work.
    The one item that cannot be ruled out at this point is the display port of the video card itself.  By chance, do you have another card to test in this system or another system to test the card in that meets the requirements?  It may be worth contacting XFX as it appears that this may be an issue with the display port of the card.  
    Here is their link should you need it.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for