Colour of the triangle in ComboBox

When I set the foregroung colour to White and the background colour to Black the triangle in the corner is no longer visible until I select the ComboBox. Is there any way to make the triangle visible at all times regardless of what the foreground and background colours are set?

You will have to extend WindowsComboBoxUI and install this new UI for your ComboBox.
Take a look at:
http://www.developer.com/java/article.php/735291
It is a excellent example of how to extend and install custom UI's.
Hope it helps.

Similar Messages

How do I get my printer to match the colours of the image as I see it on screen?

How do I get my printer to match the colours of the image as I see it on screen? My HP Office Jet Pro L7680 printer tends to print my images with a bias towards red compared to the image I am seeing on screen with Lightroom 5 using a Mac with Retina 5 screen. Would appreciate any expertise on how to calibrate the printer to the screen

You have two options. The first method costs nothing but is not as accurate and the second means buying hardware and investing some time. The fastest way to get things closer is to download the color profile from the printer manufactures site for the printer and paper combination you are using. Install it on you Mac and relaunch LR. This is best when the paper and printer are both from the same company; in your case, HP. If the paper is not made by HP, you can often find profiles for your paper/printer by going to the paper maker's web site and doing a search for the appropriate profile.
The other alternative is to purchase a piece of hardware such as the ColorMonki which can be used to not only profile your monitor for color balance but also you printer/paper as well as your camera. When all of your devices agree on what color 118,118,118 means, you get the same color from capture to print but this is also an expensive option and there is a lot of time involved in building your own color profiles. The results however, are much more accurate.
Once you have a color profile installed, the next step involves doing soft proofing. Once you have your image looking the way you want it to in LR, open it in the soft proof option. This will show you how your print will look using the color profile for the paper/printer you are using. During the process, you will be shown the print on your screen which may look off. Use the small triangle in the upper-right corner of the histogram to turn on the out-of-gamut warning. This will highlight any parts of your image which contain colors your printer can't handle. Use the rendering intent options to decide how you want these colors handled (relative or perceptual). Check them both and use the one you like best. You can also make additional changes at this point if required before you generate the JPG image. Make sure to save it as a max quality JPG using the sRGP profile. Once saved, you can send this image to your printer or even to a lab as the process is the same.The attached link should get you to a video showing how to use the ColorMunki hardware/software but, more importantly, shows you how to prepare an image for printing (in this case, for a lab) using soft proofing with the color profile created (or downloaded).--Great Color from Your Lab Prints – Every Time! on Vimeo

If I have my iPhone 5 replaced at a Apple Store, can I have the colour of the device changed?

My iPhone 5 is faulty as its battery is overheating. I was thinking about taking the phone to an Apple Store for a replacement. Will I get to choose the colour of the phone or will I recieve the same colour?

It might help to think of the Apple Store Genius Bar in the same way that you would think of an auto mechanic's service bay. Imagine that you have towed in a disabled car to have it fixed. When the repair is done, the mechanic hands you the keys to a different model with a different engine and different option package. Great deal right? As I'm sure you can imagine, real life does not work this way.
You will only drive out with the same model that you towed in. If you want a different model, your solution is not in the service department, but on the sales floor. The Apple store is no different.

How do you use RGB And CMKY colours in the same document for print?

I want to create a piece of work with a navy blue back ground and a font on top but don't want to change the colour just the RGB to CMKY mode so the colour looks slightly brighter sitting on top. I have seen this printed out in black and looks amazing but don't know how to create it. Could someone please help?

Sophie,
Your File>Document Color Mode (along with the Edit>Color Settings) determines how the colours are interpreted, more specifically fitting it into the colour gaumt in question. CMYK Color (Mode) had a narrower gamut of less bright colours, RGB has a wider gamut of more vivid colours.
Your Window>Color palette expresses the colours in terms of your chosen combinations of CMYK or RGB (or a few others) values, which are then interpreted by the colour mode.
This means that you can have four combinations: you may insert CMYK values in both CMYK and RGB mode, and you can insert RGB colours in both CMYK and RGB mode.
You will find that most CMYK/RGB values will change once saved, owing to the fundamental differences between the two colour modes.

Change the colour of the outer line of a circle

Hello everyone,
I drew up a circle with no fill inside, to show where the location of my highway storm culvert will be.
I changed the thickness of the outer line of my circle shape by creating a stroke effect at layer → blending options → stroke; then I changed the thickness of the line by right clicking in stroke at the layers panel and then choosing "scale effect."
But the problem I have is that the outer line is gray, and I want it to be black.
The outer line was originally red though so I changed my image → mode to grayscale, because I couldn't find a way to change the colour while keeping my image in RGB colour. So I've managed to make the outer line gray by changing the image mode but I still can't change the colour of the outer line to black.
I'm sure there must be other ways of changing the outer line colour without having to change the image mode, but I'm clueless.
Here is my drawing:
The text next to the circle says «Obra de desagüe». That's spanish for "drainage construction site."
You see, I can't change the colour because I have no clue at where the "change colour option" is. I tried going to layer → layer properties, but in there there's only 7 colours to choose from. I chose a random colour, just to see what happens and what truly changed colour was the layer, within the layers panel; not the shape contained within the layer.
So I'm lost here, any help please?
Unfortunately I'm still not an expert in Photoshop just yet.
Thank you for reading my post.

Set shape layer opacity 100% Fill 0% to make fill transparent or add an empty layer make a circular selection stroke it black.

How can i change the colour of the keys on my mac? is it possible to get them changed?

i was looking at a macbook i was today and it's keys on the keyboard were in a rainbow formation, with different colours. Is there a way to bring mine in to change the colours of the keys? or did i have to order it like that?

Ask the person who owned the computer or do a Google & Bing search.

In VIEWING (to print) my iTunes music (in finder), how can i view subfolders without clicking on the triangle of each main folder?

In VIEWING (to print) my iTunes music (in finder), how can i view subfolders without clicking on the triangle of each main folder?
I am trying to print a list of all my music. For example, main folder is BEATLES. Subfolders are Magical Mystery Tour, Yellow Submarine, Abbey Road, etc...
and I want to view and print all the subfolders. This is a recovery project after my hard drive failed. I know this is truly a "finder" question and will double post there.
Thanks.
Amy

amy lynn wrote:
way too much ink.
Don't know what this means but okay.

How do I view my subfolders so I can print a list of my directory (main folders and internal subfolders) without clicking the triangle to expand each main folder?

In VIEWING (to print) my iTunes music (in finder), how can i view subfolders without clicking on the triangle of each main folder?
I am trying to print a list of all my music. For example, main folder is BEATLES. Subfolders are Magical Mystery Tour, Yellow Submarine, Abbey Road, etc...
and I want to view and print all the subfolders. This is a recovery project after my hard drive failed. I know this is truly a "finder" question and will double post there.
Thanks.
Amy

Try PrintWindow:
http://www.macupdate.com/app/mac/6465/print-window
Regards.

In Pages when I go to FIND how can I change the highlight colour of the found word? At the moment it is a very pale grey and not easily seen.

In Pages when I go to FIND how can I change the highlight colour of the found word? At the moment it is a very pale grey and not easily seen.

Well, it might depend on the nationality of your keyboard, but on my US keyboard, the tilde ("squiggle") is above the TAB key; on a Mac, ⌘-TAB cycles through the active applications and ⌘-tilde cycles through the windows in the front application.
When you do a Find, Pages selects an instance of your search text (the next one after the current selection, I think, but I didn't check that). It doesn't make the document window the front window, though. If you click in the window to bring it to the front, it moves the selection (or insertion point) to wherever you click unless you click on or above the ruler. Try clicking at the top of the document window after you do a find; say somewhere near the document name. Now you should see the highlighted selection (your search text). If you click back on the Find window, the selection will go grey again, unless you hold ⌘ down while clicking.

Is it possible to change the colour of the bars in a chart on the iPad?

I'm using keynote for iOS and I'm trying to pick the bar colour for my charts. I understand that the default settings will change the colour for each new series but I have a few charts all with a single series and I would like to change the colours along the way. Below is an image from my presentation, basically I'm looking for guidance on how to make the blue bars into red bars.

Set the grid background color black and set the GridItem background color something else.
Here is an example.it is better to set this kind style attributes in css
<mx:Grid backgroundColor="#000000" verticalGap="0">
   <mx:GridRow>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
   </mx:GridRow>
   <mx:GridRow>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
   </mx:GridRow>
</mx:Grid>

Change the colour of the tile dynamically:

Hi,
I have 12 tiles in my application. Depending upon some condition, few tiles colour should be changed and also to the same tiles image should be added. (I'm creating tiles using Border)
Can anybody suggest how can I achieve this?
Thanks,
Santosh

Please close your previous threads before you start a new one.
Also, you have asked this very same question before here:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/b3752b09-2ee2-46ac-a941-dc7baad78110/change-the-colour-of-the-rectangle-dynamically?forum=wpf#b3752b09-2ee2-46ac-a941-dc7baad78110.
Please don't ask the same question twice.
You could use DataTriggers and/or converters to change the property of some UI element based on some condition as already suggested in the previous thread.
Of course you must post your code, or even better upload a reproducable sample of your issue to OneDrive and post the link to it here, for anyone to be able to provide a specific solution.
But note that the forums are not for anyone else to do the entire work for you. You were given code samples of how to use data triggers and converters in the previous thread. That should certainly give you the idea.
Please remember to close your threads by marking helpful posts as answer and please start a new thread if you have a new question.

Change the colour of the prompt and the value

Hi,
I have an Item MessageStyledText with some value on an OAF Page.
By default the colour of the Prompt and the value of this Item are black.
But i need to change the Colour to Blue.
Fast response highly appreciated.
Thanks,
Palepu.

Approach 1:
Custom Look and Feel - Create your CLAF and change CSS Style.
Limitation - The main limitation of the Custom Look and Feel functionality is that you can only extend Simple LAF or Base LAF, which do not include all the functionality of the Browser LAF (BLAF) or SWAN.
Approach 2:
You can do it programmetically as follows:
import oracle.cabo.style.CSSStyle;
CSSStyle customUnCss = new CSSStyle();
customUnCss.setProperty("text-transform","uppercase");
customUnCss.setProperty("color", "#FF0000");
OAMessageStyledTextBean sampleBean = (OAMessageStyledTextBean) webBean.findChildRecursive("<Id of your messageStyleText will come here>");
if(sampleBean != null)
sampleBean.setInlineStyle(customCss); //set custom css style
You need to provide more details to get more appropriate solution/workaround.

Change the colour of the rectangle dynamically:

Hi,
I've some tiles in wpf application. (non clickable, drawn using Rectangle). I want to change the colour of the tile depending upon condition Ok, Warning, Error to the colour Blue, Yellow, Red respectively.
Can you please let me know how can I achieve this?
Thanks,
Santosh

Thanks for the response.
I'm using Datatemplate like below:
<DataTemplate x:Key="Template1" DataType="{x:Type BusinessObjects:BindableCapability}">
<Border x:Name="CapabilityBorder"
Background="{StaticResource GlobalHeaderBackgroundBrush}"
BorderBrush="{StaticResource TileBorderBrush}"
BorderThickness="1"
Margin="8"
Height="200"
Width="420">
<Grid>
<TextBlock x:Name="CapabilityTextBlock"
Text="{Binding CapabilityIdentifierDescription}"
Style="{StaticResource TileTitleTextStyle}"/>
</Grid>
</Border>
<DataTemplate.Triggers>
<DataTrigger Binding="{Binding IsAvailable}" Value="False">
<Setter TargetName="CapabilityBorder" Property="Background" Value="{StaticResource TileErrorBrush}"/>
<Setter TargetName="CapabilityTextBlock" Property="Foreground" Value="{StaticResource TileErrorForegroundBrush}"/>
</DataTrigger>
</DataTemplate.Triggers>
</DataTemplate>
<DataTemplate x:Key="Template2" DataType="{x:Type BusinessObjects:BindableCapability}">
<Border x:Name="CapabilityBorder"
Background="{StaticResource GlobalHeaderBackgroundBrush}"
BorderBrush="{StaticResource TileBorderBrush}"
BorderThickness="1"
Margin="8"
Height="200"
Width="202">
<Grid>
<TextBlock x:Name="CapabilityTextBlock"
Text="{Binding CapabilityIdentifierDescription}"
Style="{StaticResource TileTitleTextStyle}"/>
</Grid>
</Border>
<DataTemplate.Triggers>
<DataTrigger Binding="{Binding IsAvailable}" Value="False">
<Setter TargetName="CapabilityBorder" Property="Background" Value="{StaticResource TileErrorBrush}"/>
<Setter TargetName="CapabilityTextBlock" Property="Foreground" Value="{StaticResource TileErrorForegroundBrush}"/>
</DataTrigger>
</DataTemplate.Triggers>
</DataTemplate>
Like Temlate1 and Templdate2, I should have one more template which fills the color dynamically for the above templates. I've 12 tiles (rectangles), I need to give some blue, some yellow and some red depending upon some condition.
Please suggest how I can achieve this?
Thanks,
Santosh

Is it possible to change the colour of the Pages' skin, since it is grey, is there any way to change it and make it less tedious?

Is it possible to change the colour of the Pages' skin, since it is grey, is there any way to change it and make it less tedious?

fruhulda wrote:
If you see any grey"background" if is on the left and that is the comment field.
Hi fruhulda
It's not the comment field which is a restrictive description.
In fact it's the window's background.
Yvan KOENIG (VALLAURIS, France) lundi 26 septembre 2011 12:08:45
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

Will u help me or not?

Colour of the triangle in ComboBox

Similar Messages

Maybe you are looking for