Column Arrenge in order in intractive report

hi..
i want to Arrenge Column according to me in order in intractive report .I have use arrow for up & dowmn in report Column Attributes .but there are no change .
How can i arrenge column in order acording to me.
Thanks
Manoj Kaushsik

Hi,
Run page.
Then open interactive report action menu and Select Columns.
Order your columns. And then again from action menu Save Report.
In select list select "As default report setting".
Br, Jari

Similar Messages

Columns out of order in ageing report

Hello,
When running the 'Customer Receivables Ageing' Report the ageing columns are not in the order they should be. For example:
The columns should be in this order:
Customer Code | Customer Name | Balance Due | Future Remit | 0- 30 | 31-60 | 61-90 | 91-120 | 120+ | Doubtful Debt
Instead it is showing in this order - which is wrong:
Future Remit | 0-30 | Customer Name | 120+ | 31-60 | 61-90 | 91-120 | Customer Code | Doubtful Debt | Balance Due
I have located a similar instance on the SAP notes but this refers to their being a possible two instances of this report open. This is not the case. I have had the user log out of SAP and log back in as well as having them restart their pc - both to no avail.
Would anyone else have any suggestions?
Regards,
Juan

Hello Juan -
contact SAP Support or Partner immediately - we had the similar situation a logn time ago and someone at SAP had to apply a fix. I never heard what caused it...
Take care - Zal

How to order an entire Report by a column with in a group...

Okay, I have a Group Above report, and I want to order the groupings by a column within the group. I am using a lexical parameter in place of the entire ORDER BY statement in the query, giving the user the capability to sort the report by any specific column, at runtime.
So, basically, this parameter allows for the ORDER BY to be dynamic; however, in the Data Model, I am required to designate at least one hard-coded break column, which overrides whatever column is designated by the user at runtime.
Any ideas how I can get around this?

Hi Brice,
If you want just i single hard coded column in a group
then i think you can create summary column with counting
so you can say say a column that gives you just Serial no.
and rest of the thing as it is.
in this way you got your hard column and also Order by facility
that you want.
Hope that helps you.
Enjoy Oracle....

How to order / group a report by a placeholder column ?

How to order / group a report by a placeholder column populated by the group filter ?
In more detail .....
My Data model editor's select statement brings back (say 1000 rows) from the database.
The group filter decides (on performing certain validations) whether to print a row or not in the report.
Additionally the group filter calculates a "rule type" (just a rule number to say on basis of what rule, the row was selected)
I would like to order/group the report on the placeholder column which was calculated by the group filter ?
Obviously, I won't be able to add the "ORDER BY :CP_RULE_NUMBER" in the sql statement as the placeholer column cp_rule_number
is determined by the group filter level only. (If I do, I get a frequency error)
Any ideas ?
Thanks in advance.
Edited by: user553361 on 8/10/2008 17:35

how is the group filter implemented?
If its pure PL/SQL, what about putting the filter-procedure in a stored function into the database? Then you could use the group filter in your query.

How to rename C00n generic column names in a Dynamic SQL report

I have a an interface whereby the user can select 1 to 60 (upper limit) columns out of 90 possible columns (using a shuttle) from one table before running a report.
To construct the SQL that will eventually execute, I'm using a "PLSQL function body returning SQL query" with dynamic SQL. The only problem is that I have to use "Generic Column Names" option to be able to compile the code and end up with c001 to c060 as the column names.
How can I use the names of the selected columns as the report headings rather than c001, C002... etc?
I do not know beforehand which columns, or how many columns or the order of the selected columns.
I know Denes K has a demo called Pick Columns but I can't access his code. I have a hunch though that he may be just using conditions to hide/show the apropriate columns.
thanks in advance
PaulP

Hi Paul
I would change the Heading Type in the Report Details screen to PLSQL and use the shuttle item to return the column values. e.g.
RETURN :p1_shuttle;
I'm assuming the shuttle already has a colon separated list of the column headings in the correct order?
I hope that helps
Shunt

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to convert colon separated column values in multiple rows in report

Hi All,
I want to display colon separated values from a column, in a multi row in report.
For example i have a column1 in a table with value 'A:B:C' , column2 has value '1'.
i want to show in a report three rows using these two columns like
column1 column2
A 1
B 1
C 1

Here's one way:
SQL> create table test (col1 varchar2(20), col2 number);
Table created.
SQL> insert all
2    into test values ('A:B:C', 1)
3    into test values ('Dg:Ezs', 2)
4 select * from dual;
2 rows created.
SQL> select
2    t.col2,
3    regexp_substr(t.col1, '\w+', 1, t2.column_value) c1
4 from test t,
5    table(cast(multiset(select level
6                        from dual
7                        connect by level <= length(t.col1) - length(replace(t.col1, ':', '')) + 1
8                       ) as sys.odcinumberlist )) t2
9 order by 2, 1;
      COL2 C1
         1 A
         1 B
         1 C
         2 Dg
         2 Ezs
SQL>Edited by: Littlefoot on Jan 31, 2012 10:13 AM

Pass column-name as a parameter to reports

Hello,
the code below calls a report. But now I want to sort the rows in the report. For example I have a text-item in my form-modul. If I type a column-name and press the button then the rows should be sorted in the report. Is it possible tp pass column-names as parameter to reports?
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := find_report_object('STATIONSTOPOLOGIE');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_oracle-dev');
-- SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://oracle-dev:8888/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=rep_oracle-dev','_blank');
ELSE
message('Error when running report');
END IF;
END;

Hi,
the work has been done in reports. You can use a lexical parameter in reports to add a condition for sorting to the query like:
select .. from .. where ... &p_order.
Then add another parameter to the report (for example p_param). Fill p_param via your interface in forms (SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, ....) with the column name. Then build a report trigger like:
if :p_param is null
then
:p_order:= null;
else
:p_order:= 'order by '||:p_param;
end if;
But have a look, that p_param can only get correct values.
Rainer

Very urgent :how I order by my report within the report option not change i

Hi master
Sir I design the report but I need my report order by cheq_no now my report order by voucher no but If I change in query then my format must be change that very problem for me I again design
Is any option in report through which I order by my report as per my require column I is if I need on cheq_no , voucher_no or date
Please give me idea how I order by my report within the report option not change in report query
Thanking you
aamir

Use a lexical parameter (see online help):
select ...
order by &sort_parameter

How to order the Discoverer reports through MENU function sequence

I created 20 Discoverer reports functions in the MENU form, there is a sequence column,
but when the 20 Discoverer reports displayed on OSO, they are not ordered by the sequence number, looks like just randomly listed. How can I make the 20 Discoverer Reports ordered by the sequence number when displayed on OSO?

Hi ram,
There are steps to register in oracle applications so there wont be any login poped up.Below is the link in that viewer and plus acces with e-business suite
http://ascbi.com/thirdparty_documents.htm_
hope it helps you,award points.
By,
KK

Optimal outline order for Hyperion Reporting

Good Morning -
What is the best outline order for faster report retrieval ? I am not referring to optimal order for calculation which is modified hour glass.
Is it still inverse order of hour-glass?
Thanks

hyperion Reporting (Financial Reporting)uses Report scripts to generate its data. The optimal report has dense dimensions as the columns and inner most row of data from the dense dimensions. if you have a common format of how the reports pull data having the outline ordered from the left most report row member to the right most member
So if you had the sparse dimensions of product market and customer and your report looks like customer, product market switching the order of the dimensions to match that could help report preformance (assuming you are drilling into each of these dimensions. I've also heard having your most commonly accessed sparse dimension last is better. And of course if you are using attribute dimensions in your report having the base dimension associated with the attribute dimensions last is recommended for better report retrieval (I don't know why)

Bug - Sorting Order in SQL Reports not Working?

Today i defined a SQL Report in APEX and choose 3 columns for sorting the report.
The order is like that:
1. Category
2. List Price
3. Product Name
When calling the SQL Report in a new session i expected to get a sorted report like defined.
I got only the report like the last person who edited this report.
It looks like that the Sort Sequence columns is not usable in SQL Reports.
Here is an example based on the problems which i described:
http://apex.oracle.com/pls/apex/f?p=40082
below the SQL Report a screenshot is shown, where the Report Attributes (and the sort sequence) is displayed.

OliverL
Did you reset the pagination of the report you made the changes to?
Normal behaviour is that APEX remembers per user per report the last sorting that was used.
Including when a user clicked a column header to change the order from the default one.
The sort preference are stored in preferences with a name like FSPapp_id_Ppage_id_Rinternal region_id_SORT.
Nicolette

Purchase order price change report

Hello
How to retieve the purchase order price change report ? do we have any standard report for it or any table which gives these data?
kindl

HI
Have you activate version management at your end for PO,i think this will help you to track changes of PO for qty,price etc.
[http://wiki.sdn.sap.com/wiki/display/ERPLO/Version+Management]
Regards
Kailas Ugale

How to create a fixed-width column within an APEX 4 interactive report?

This thread is a follow-up to {message:id=9191195}. Thanks fac586.
Partial success: The following code provided by fac586 limits the column width of the Apex 4 interactive report column as long as the column data contains whitespace within a Firefox 3.6 browser:
<pre class="jive-pre">
<style type="text/css">
th#T_DESCRIPTION {
width: 300px;
td[headers="T_DESCRIPTION"] {
width: 300px;
word-wrap: break-word;
</style>
</pre>
Notes:
1. The code above is put into the HTML header section for the page.
2. T_DESCRIPTION is defined as VARCHAR2(2000).
3. The code above works within the Firefox 3.6.12 browser but does not work within the Internet Explorer 7.0.5730.13 browser.
I tried adding "float: left;":
<pre class="jive-pre">
<style type="text/css">
th#T_DESCRIPTION {
width: 300px;
td[headers="T_DESCRIPTION"] {
width: 300px;
word-wrap: break-word;
<font color="red"> float: left;</font>
</style>
</pre>
Notes:
1. "float: left;" does not require whitespace and successfully splits the column between characters in lieu of whitespace.
2. "float: left;" shrinks the cell height and allows the page background to show through... couldn't determine how to fix this.
3. The code above works within the Firefox 3.6.12 browser but does not work within the Internet Explorer 7.0.5730.13 browser.
I've done some more research, but I still haven't discovered how to create a fixed-width column within an APEX 4 interactive report that displays properly within an Internet Explorer 7 browser.
Any ideas and help will be appreciated.

Thanks for your help with this!
<pre class="jive-pre">
what theme are you using?
</pre>
A customized version of theme 15.
<pre class="jive-pre">
Floating a table cell makes no sense (to me anyway).
</pre>
You are correct. I was just trying a different approach ... trying to think out of the box.
<pre class="jive-pre">
Think you'll need to create an example on apex.oracle.com with sample data
if there are any further problems.
</pre>
Great suggestion! The code your provided works in the Firefox 3.6.12 browser, but still doesn't work within my Internet Explorer 7.0.5730.13 browser.
UPDATE:
I have recreated the problem at apex.oracle.com, you can use the following information to check it out:
URL: http://apex.oracle.com/pls/apex/f?p=43543:100::::::
Workspace: IR_FIXED_WIDTH_COLS
Username: GUEST
Password: Thx4help
Application: 43543 - CM_RANDY_SD
Note: Table name is TEST_DATA
The following code provided by fac586 works in both Firefox 3.6 and IE7 using default theme "21. Scarlet" at apex.oracle.com; however, it doesn't work when I use a copy of our customized theme "101. Light Blue":
<pre class="jive-pre">
<style type="text/css">
.apexir_WORKSHEET_DATA {
th#T_DESCRIPTION {
width: 300px;
max-width: 300px;
td[headers="T_DESCRIPTION"] {
max-width: 300px;
word-wrap: break-word;
</style>

</pre>
Any idea what in the theme could be causing the fixed width column to be ignored in IE 7?
Edited by: CM Randy SD on Dec 7, 2010 11:22 AM

Error while generating Production Order from Recommondation Report

Hi..
I have got few production orders to be created through Recommendation Report.
After getting them 'Checked' when i try to create production order, following error message appears :
No matching records found 'Product Tree' (OITT) (ODBC - 2028) [message 131-183]
Please let me know what went wrong ?
Regards
Rakhi

Hi.......
I think you are trying to make production orders who has no BOM. First prepare BOM and then Create Production Order from Recomemdation Report. Because it supports only Standard Production Order and not Special......
Regards,
Rahul

Column Arrenge in order in intractive report

Similar Messages

Maybe you are looking for