Column Bread in the ESS launchpad

Hi everyone,
I am struggling to get my column break to take effect when I add it in my ESS launchpad.
I see how it is used in the standard launchpads, but I can't seem to get it working myself. When I insert a column break it will only place itself inside a folder. And regardless, it doesn't have any effect.
Anyone care to share with me how you do this?!
Please?
Kind regards,
Stina

Hi Roy,
Thank you for your help.
We experienced the same, so we also copied a standard one and altered it. But in the process I managed to delete the Column Break that came along with the standard launchpad.
Do you really think I have to start all over again, just because I can't get the column break to work?
I'm thinking I maybe should open an OSS. This should be a piece of cake... Don't you think?
kind regards,
Stina

Similar Messages

  • How to edit the text of a certain column in SALV_WD_TABLE  in ESS layout

    hi,expert.
    i want to change the text of the column:appraisee name in ESS worklist.
         Application :HAP_START_PAGE_POWL_UI_ESS
        Web Dynpro Component: SALV_WD_TABLE
        Window Information: TABLE
        View Information: VIEW_TABLE
    how can i achieve it? looking forward for your help.
    yours ping.

    check http://help.sap.com/erp2005_ehp_04/helpdata/EN/48/9968e67f020e27e10000000a421937/frameset.htm
    check notes  1416756, 1408243.
    Run SE80 and select the following:
    PACKAGE                PAOC_HAP_DOCUMENT_WD_UI
    Expand Node            Web Dynpro
    Expand Node            Web Dynpro Applicat.
    Expand Node            HAP_START_PAGE_POWL_UI_ESS    or
                           HAP_START_PAGE_POWL_UI_MSS
    Expand Node            Applic. Configurations
    Select Configuration   HAP_START_PG_POW_ESS_AC       or
                           HAP_START_PG_POW_ESS_AC
    => Test

  • Is it possible to copy ESS launchpad

    Dear Experts-
    We are implementing ESS 1.51 busines spackage. Our backend system in ECC 6.0 EHP5. We want customise ESS launchpad (not just removing the links). Can any one let me know the steps. How I can make a copy of ESS launchapad. After makign the copy how should add it to the portal role. Please let me know. I looked for notes on SDN as its a new topic could not find many.
    Thanks,
    Raj.

    did you check in LPD_CUST
    chekc the note  1584026

  • Seperate column numbers for the same page.

    I was wondering how to make one part of a page have like 6 columns, and a different section have 3 columns, all on the same page. I know how to change column numbers but not twice on the same page. I want to be able to do it like it does in the non-profit newsletter template. Open that template and click show layout to see what I mean. I want to do that except on a blank page.
    PowerBook G4   Mac OS X (10.4.4)   My.Computer.Ownz.

    No problem. I had never used the contextual menu to insert a break. When I checked last night, the contextual menu didn't say "break" after the choices, this morning it does. But, I'm finding using the contextual menu to be very "finicky." It won't let me insert a break in the middle of a line & placing the cursor at the end of a line & right-clicking selects the return character & has a check mark next to paragraph break in the contextual menu. It let's me change the character to another. I think the contextual menu would be very helpful to determine what kind of break is in a template or to change a bread from one type to another, but I'll stick with using the Insert menu.
    Peggy

  • How to configure the ESS portal in ehp 6 server?

    Dear All,
    Pls advice me how to configure the ESS portal in my client server?
    I want to create new iviews ,pages,workset and link them all to R/3,with total configuration steps please.
    Thanks and Regards,
    Pradip

    hi pradeep ,
    which version r u using wdjava or abap ? ......if ur using java you have to do all in home page framework and if you are using with launchpad from   EHP5 better you can create it from launchpad by going to t -code LPD_CUST and select the ROLE:ESS and INSTANCE: MENU
    REFER Below............
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09b3304-07d8-2b10-dbbf-81335825454f?QuickLink=index&overridelayout=true&38388417774934
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a?QuickLink=index&overridelayout=true&5003637159921
    http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=31476&bc=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/108c31e7-b6a7-2d10-3692-c1a9f7a5c4dc?overridelayout=true

  • ESS launchpad

    Hi,
    I want to copy the ESS role in SPRO/Pers mgt/ ESS (Webdynpro ABAP) / General settings / ESS menu for services / Meny for sap role / set up launchpad (Employee services).
    I need an additional ess role and add  more functionality to the copied role. Any suggestions on how to perform this?
    Thank you!
    Cheers,
    hilde

    Hi Hilde,
    In addition to link given by Abdul Ghani , this blog talks about the steps you need to follow:
    http://scn.sap.com/community/erp/hcm/employee-self-service/blog/2012/05/31/tips-recommendations-for-customizing-ess-menu-wd-
    Hope this helps.
    Regards,
    Sahir.

  • Can't see the ESS Additional Personal Data link within Personal Information

    Hi All,
    For some reasons, I can not see the Additional Personal Data link within the ESS Personal Information iView. I have checked the Homepage framework and the existence of the iView in the PCD and everything appears to be fine.
    Do I need to assign any additional infotype to my id or give myself specific authorisations to see this link?
    I would really appreciate if you could provide an answer to my query.
    Thanks,
    Vibhu

    Hi,
    I think mostly you have maintained the data in PA30 Transaction and had data in Info type 0105.
    After this try to check with your EA-HR patch and SAP HR patch in the services. If  both are not maintained at the same patch levels such type of problems will occur.
    Regards,
    kishore.

  • Return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST

    Hi,
    How to return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST?
    For example : if the row has 3 columns then after selecting the particular row, the RETURN_TAB internal table should contain all the three column values.
    Regards,
    Raghu

    Hi,
       Try the following...
    DATA : it_fields like help_value occurs 1 with header line.
    data: begin of w_vbap,
            vbeln      like vbap-vbeln,    
            posnr      like vbap-posnr,   
            werks      like vbap-werks,  
          end of w_vbap.
    data: i_vbap   like w_vbap   occurs 0 with header line,
             w_fields type help_value,
          i_dfies type table of dfies,
          i_return_tab type table of ddshretval with header line,
          i_field  type dfies.
      select vbeln posnr werks
          from vbap into table i_vbap up to 5 rows.
    if sy-subrc = 0.
       sort i_vbap by vbeln.
    endif.
      clear it_fields[] , it_fields.
      it_fields-tabname = c_vbap.
      it_fields-fieldname = 'VBELN'.
      it_fields-selectflag = c_on.
      append it_fields.
      it_fields-tabname = c_vbap.
      it_fields-fieldname = 'POSNR'.
      it_fields-selectflag = space.
      append it_fields.
      it_fields-tabname = c_vbap.
      it_fields-fieldname = 'WERKS'.
      it_fields-selectflag = space.
      append it_fields.
      loop at it_fields into w_fields.
        i_field-tabname   = w_fields-tabname.
        i_field-fieldname = w_fields-fieldname.
        i_field-keyflag   = w_fields-selectflag.
        append i_field to i_dfies.
      endloop.
      call function 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
          retfield               = 'VBELN'
         window_title           = 'Select'
        tables
          value_tab              = i_vbap
          field_tab                = i_dfies
          return_tab             = i_return_tab
       exceptions
         parameter_error        = 1
         no_values_found        = 2
         others                 = 3
      read table i_return_tab into w_return_tab index 1.
      if sy-subrc = 0.
      endif.
    Regards,
    Srini.

  • How to change recordset bahaviour to accept dynamic column names in the where clause

    Hi
    im using php-mysql and i make a recordset and i want to make the column names in the where clause to be dynamic like
    "select id,name from mytable where $tablename-$myvar";
    but when i do this my i break the recordset and it disappear
    and when i use variables from advanced recordset it only dynamic for the value of the column not for the column name
    and when i write the column name to dynamic as above by hand it truns a red exclamation mark on the server behaviour panel
    so i think the only way is to change the recordset behaviour is it? if so How to make it accept dynamic column names?
    thanks in advance.

    As bregent has already explained to you, customizing the recordset code will result in Dreamweaver no longer recognizing the server behavior. This isn't a problem, but it does mean that you need to lay out your dynamic text with the Bindings panel before making any changes. Once you have changed the recordset code, the Bindings panel will no longer recognize the recordset fields.
    Using a variable to choose a column name is quite simple, but you need to take some security measures to ensure that the value passed through the query string isn't attempting SQL injection. An effective way of doing this is to create an array of acceptable column names, and check that the value matches.
    // create array of acceptable values
    $valid = array('column_name1', 'column_name2', 'column_name3');
    // if the query string contains an acceptable column name, use it
    if (isset($_GET['colname']) && in_array($_GET['colname'], $valid)) {
      $col = $GET['colname'];
    } else {
      // set a default value if the submitted one was invalid
      $col = 'column_name1'
    You can then use $col directly in the SQL query.

  • HT5824 I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have number

    I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have numbers synced to iCloud.
    I tried to undo it but the app crashed.
    I am hoping there's like a previously saved version of my file in iCloud somewhere. 

    No, iOS does not do short term incremental back ups to iCloud such as you get with Time Capsule.It backs up when you do soo manually, or if set properly, when the device is plugged in and connected to WiFi. It will not have saved your changes as of 10 minutes prior.

  • I can't sort a single column only (ignoring the next column)

    I can't sort a single column only (ignoring the next column) in NUMBERS

    Numbers sorting follows a database model in which each row is a 'record' rather than a collection of unrelated data items. When a table is sorted, the integrity of the individual records (rows) is maintained.
    If you need to sort a single column, that column (or its data) must be separated from the rest of the table.
    That can be done using copy/paste (as described above by Wayne), or by taking the column to be sorted out of the table, dropping it on the sheet to form a new, single column table, doing the sort, then returning the column to the original table.
    The 3 1/2 step process takes longer to describe than to do.
    Regards,
    Barry

  • How to change font size, maximum column size in the result screen ?

    hi All
    That's great when using SQL Dev.
    But I also have a trouble that how to change font size, maximum column size in the result screen ?
    My users think that font in result screen is shown very small, and whenever the data in each colum is long then it's not shown full data in column, they must double click for extend the size. Have the option to default the max size for showing full data in each column ? I try but still not to do that .
    Appreciate for anyone to help us.
    Thanks all.
    Sigmasvn

    You can't change the font for the results screen yet, however you will be able to select an auto-fit option for selected columns, so if some columns have slitghtly wider text you'll be able to set the column widths to handle these wider columns.
    Also, there s the option of switching the layout of a record in the grid.
    Sue

  • How to change the year in a range of column dates to the new year?

    How to change the year in a range of column dates to the new year?

    Depends on the pattern of the dates. The last procedure will work for any pattern, or no pattern at all.
    For examples.the dates are assumed to be in column A, starting at A2
    Sequential dates?
    Enter first updated date in the first cell.
    Enter =A2+1 in cell A3. Copy the cell.
    Select A3 to the end of the list. Paste.
    With the cells still selected, Copy, then go Edit > Paste Values.
    Evenly spaced dates?
    Same procedure as above, but replace +1 in the formula with + and the number of days between dates in the list.
    Randomly spaced dates?
    Select cell B2. Press option-left arrow to insert a (temporary) column to the left of column B.
    Click on the empty cell B2 in the new column. Enter the formula below:
    =DATE(YEAR(A)+1,MONTH(A),DAY(A))
    Copy the cell, then select B2 - Bn where n is the last ow containing a date to be converted. Paste,
    With the cells still selected, Copy.
    Click on A2, then go Edit > Paste values.
    Click on the column B reference tab to select all of column B.
    Hover the mouse over the right end of the reference tab, and click the black triangle when it appears.
    Choose Delete Column from the menu that appears.
    Regards,
    Barry

  • PowerView option - Drill Down one level at a time also hide the columns other than the hierarchy columns

    Hi All,
    I have a simple PowerView report (Excel 2013) in which I have a hierarchy (three columns), an image column, and a Value column:
    When I change the Show Levels option to "Rows - Enable Drill Down One Level at a Time", image column also hide.
    I want to keep the image column displayed while drill down/up to the hierarchy.
    Is it possible? If yes, then how?
    Thanks & Regards,
    Muhammad Ehsan
    If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

    Hi Muhammad,
    According to your description, you have images at child level. Now you want to have the images displayed when have the child level items collapsed. Right?
    In this scenario, when you show the data in a matrix in Power View, those images, Size ID and Prices have been added into a child group. If we enable drill down, all the items within the child group will be collapsed. We can't change it at all in Power
    View.
    For your requirement, we suggest you design your report using SQL Server Data Tools in Reporting Services. In Reporting Services, we can have specific columns toggled by the parent item.
    Reference:
    Add drill-down to a Power View chart or matrix
    Drill-down Behaviour in Power View
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • How can I import db column comments into the OBIEE presentation layer?

    We have a very well designed data mart - it is a star schema and all the fact and dimension table columns have comments in them with their definition and use. There is virtually no change required in the physical or business layer. The only modifications done in the presentation layer was to hide the Pk/Fk columns.
    Is there a way to import these column comments into the presentation layer so that the business user can see this comment in the tool tip while hovering over the presentation column in Answers?
    Thanks for your help!

    Hi,
    I assume the comments you mean are stored in user_tab_comments and user_col_comments.
    When this is the case you should do the following:
    Go to your subject area in your presentation layer. For now I assume the name of this subject area is "Subject Area".
    Then right click on this subject area and check "Externalize Descriptions".
    Then create an initialization block (session) using this query:
    (select 'CD_Subject_Area_' || table_name, comments from user_tab_comments)
    union all
    (select 'CD_Subject_Area_' || table_name || '_' || column_name, comments from user_col_comments)
    Use "Row-wise initialization" for this initialization block.
    Two comments:
    1) Like I said, I assume Subject Area is the name of your subject area in your presentation layer, so I guess you need to replace this with the name of your Subject Area.
    But be sure that you replace each space ' ' with an underscore '_'.
    2) Maybe you need to refine above querys by filtering on table_name for those table_names you are using.
    Good luck.
    Regards,
    Stijn

Maybe you are looking for