Column Heading in BI report

Hi ,
I have report and i want to display the column heading for both the key and text column in the report.At present i could see column Heading only for the key column.Kindly advice
thanx
Sriram

HI Sriram
Why you want to display the heading? Do You mean, two different headings?

Similar Messages

Only one column header in delimited report ?

Hi!
Is there a way to put only one line of column header on delimited report?
(By default the Report builder puts the header in every record line...
as well the delimited_hdr = no command prompt property is not good, because puts out no header)
Thanks!
(I use RB 6i)

Hello,
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/cmdline/common/bld_delim_hdr.htm
DELIMITED_HDR command line keyword
DELIMITED_HDR is used to remove boilerplate text (such as the report header) when running a report with DESFORMAT=DELIMITED or DESFORMAT=DELIMITEDDATA.
This parameter exists in Reports 6i too .
Regards

Change Column Heading in ALV Report

Hi,
I have developed a ALV Report, showing correct output.
Problem is that Column Heading is not showing correct...means it is showing as per field name. But We want to change as per our understand. i.e. One column heading is like Unrestricted Stock but we want Unrestricted Stock...(BILF is an indicator)..
We have write in the code..
FORM build_fieldcat10.
CLEAR fieldcat_ln.
ADD 1 TO col_pos.
fieldcat_ln-ref_tabname = 'MARD'.
fieldcat_ln-fieldname   = 'LABST'.
fieldcat_ln-seltext_m   = 'BILF Unrest.Stock'.
fieldcat_ln-key         = space.
fieldcat_ln-do_sum      = space.
fieldcat_ln-col_pos     = col_pos.
fieldcat_ln-no_out      = space.
fieldcat_ln-qfieldname = space.
fieldcat_ln-hotspot     = space.
APPEND fieldcat_ln TO fieldcat.
ENDFORM.                    " BUILD_FIELDCAT1
But after change the selection text...not showing correct text..How can i change Column heading???
Please help me..

Thanks a lot dear..
My problem resolved by using SCRTEXT_L.

Dynamic Column Heading on Interactive Report

I have my column headings for my table columns stored in the database. I want the Interactive Report to use these heading (instead of static headings). Is there a way to have the columns set from the database(with a function/procedure)?

you can replace the column headings with &PAGE_ITEM.
obviously one page item per column header
then use the database to populate the items with your column headings.
craig
[http://www.oracleapplicationexpress.com]

Can I "catch" a click on a sortable column header of a report?

Hi,
I have a report.
Most columns are made sortable: users can click on them to sort.
I notice that when clicked only page-rendering executes (i.e. not page processing).
Here is the question.
I need to call some custom PL/SQL when the user clicks on a sortable column header. This PL/SQL could executes in the before header (it needs to fire before the page re-executes the query).
The PL/SQL needs to know which column was clicked on: how can I determine this?
Can I access the url (example below)? I see that it shows which column was clicked.
https://dev.centraal.boekhuis.nl:4443/pls/apex/f?p=100:3:145900176972409:fsp_sort_4::RP&fsp_region_id=1562722058676533
Thanks,
Toon

That would order the report by C1 when I click C2, which isn't what I want. I want to preserve the order of C1 (whether that's ascending or descending) and then have C2 ascend or descend for each set of values in C1.
If I can't set the Order By then I'll need something like this as my query. The "last_col1_order" and "this_col2_order" would be items, set according to the last few values of Request. It's horrible, but it gets the job done. This would be so easy in forms!
WITH data AS (
select level col from dual connect by level < 6)
SELECT
col1,
col2,
lpad(case last_col1_order
         when decode(this_col2_order,'asc','asc','desc') then col1
         else col1_desc end,20,'#') ||
    lpad(col2,20,'#') col2_sort
FROM (
SELECT
    col1,
    col2,
    (max(col1) over(partition by 1))-(dense_rank() over(order by col1)) col1_desc,
    'asc' last_col1_order,
    'desc' this_col2_order
FROM (
    SELECT a.col col1, b.col col2
    FROM data a, data b
order by col2_sort desc

Change column header dynamically at report run time

how to use LOV In report column definition under column attributes for display..
If it suceeded will it dynamicaly change header name at time of running report
my requirement is actually to change column header dynamically at time of run report
is it possible with above mentioned way?
Apex 4.1, Oracle 11g, PL/SQL Gateway configuration
Please help me on this
Thanks

Hi,
by making use of specific report column templates and column template conditions you can change the headers dynamically.
See this http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/ui_templt.htm#HTMDB25708 for more info.
regards,
Erik-jan

Two line column heading in ALV Report

Hi Experts,
My requirement is that I have to create an ALV report with columns having two lines of headings. Like a main heading called Consultants under which 5 to 10 columns of departments(Dept Num, Num of Ppl , Manager etc. ) and then Contractors(Name, Address Etc ) underwhich there would be 5 to 10 departments. Right now my report has the depts of...
How can i do that . If u would suggest by CL_SALV_TABLE then it would be great.
Thanks a lot !
Sau

i don't think you can do it using cl_gui_alv_grid or cl_salv_table.

New column header on Interactive Report

We have an interactive report on a view and when we add a new column to the view, we would need the report to add the header automatically too (without previous deployment). Can this be done in simple manner?
Thanks,
Ricardo

Hi,
I have tested the behavior of the different reports in Apex.
This is the conclusions:
Created a new column in a test table and running directly the Apex application with the table mapped in three reports:
1- Interactive Report:
- No errors in the report when you open it but the new column is not showed.
2- Classical Report with default options:
- Errors showed when you open it (ora-01403 No data found)
3- Classical Report with the option checked "Use Generic Columns Names":
- It shows automatically the new column in the report.
But still I do not have a solution to solve the problem.
Regards,
Ricardo

Change Case in Column header when designing reports in BIDS

Hi
I have used a key short-cut to change the case of headers when adding them to the header of a Tablix, but I can't remember the key combination,
Any help much appretiated
Regards
Andy
CRM 4, SQL Server and .Net developer using C#

Hi Andy,
If I understand correctly, you want to know the shortcut key combination to switch the case of words in column headers of a tablix in Reporting Services Report Designer. As far as I know, there is no such key combination. In Microsoft Word/Outlook/PowerPoint,
we can use the Shift + F3 to change case of words. However, this doesn’t work in SSRS Report Designer.
To change the case of the words in column headers, you can either copy the text to Word and perform the case change there or use built-in functions such as LCase, Ucase, or StrConv to perform the case change by using expression. Here are the examples for
the three functions:
Expression: =LCase(“Sales territory country”)                           Result: sales territory country
Expression: =UCase(“Sales territory country”)                           Result: SALES TERRITORY COUNTRY
Expression: =StrConv(“Sales territory country”, vbProperCase)   Result: Sales Territory Country
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Two column header in ALV Report

Hi Experts,
Can I have 2 headers in ALV report kind of one header and one sub header below that.
like i have to display a report having the same information for 3 systems so in header I can have the system name and below that
usual headers.
Thanks
Yogesh Gupta

it is is not possible using the ALV GRID function, ALV OO.
it is possible with ALV List function. you might loose some functionalities layout etc.
check this sample..
cehck this image..
http://img100.imageshack.us/img100/3846/output6ef.th.gif
REPORT ZTEST_ALV message-id zz .
TYPE-POOLS: SLIS.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
L_LAYOUT type slis_layout_alv,
x_events type slis_alv_event,
it_events type SLIS_T_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
MALE type i,
female type i,
END OF ITAB.
SELECT VBELN
POSNR
FROM VBAP
UP TO 20 ROWS
INTO TABLE ITAB.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'MALE'.
X_FIELDCAT-SELTEXT_L = 'MALE'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'FEMALE'.
X_FIELDCAT-SELTEXT_L = 'FEMALE'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
x_events-NAME = SLIS_EV_TOP_OF_PAGE.
x_events-FORM = 'TOP_OF_PAGE'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
L_LAYOUT-NO_COLHEAD = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = L_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
it_events = it_events
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC ne 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOP_OF_PAGE.
*-To display the headers for main list
FORMAT COLOR COL_HEADING.
WRITE: / SY-ULINE(103).
WRITE: / SY-VLINE,
(8) ' ' ,
SY-VLINE,
(8) ' ' ,
SY-VLINE,
(19) '***'(015) centered,
sy-vline.
WRITE: / SY-VLINE,
(8) 'VBELN'(013) ,
SY-VLINE,
(8) 'POSNR'(014) ,
SY-VLINE,
(8) 'MALE'(016) ,
sy-vline,
(8) 'FMALE'(017) ,
sy-vline.
FORMAT COLOR OFF.
ENDFORM.

No column heading in second page in alv report when save in excel file

Hi Expert,
How can i remove the column header from Alv report when program execute in background and save in excel file right now
its comming column header in each page. Client dont want header column in excel from second page. is this possible?
with regards
chandan_viji

Hi Ravi,
thanks for reply i have solved this problm throug line count and NEW-PAGE LINE COUNT 10000 bcoz client want output in excel file only one page header.
with regards
chandan_viji

How to give tooltip on column heading of report

Hi im using seibel analytics, i want to give tooltip on column heading of the report.
How is it possible.
Thanks in advance...

Hi
have you tested the description filed of presentation layer?

Passing prompt value to column header

Hi experts
I'd like to change the column header dynamically.
the report is using presentation variable so it's displayed after the user had selected a value in the dashboard prompt and clicked on go.
I'd like to have in the column header the value that the user had selected in the dashboard prompt.
Is there anyway to do that??
Regards

Hi,
Yes. you can do that by creating presentation variable.
What you have to do is , create the presentation variable like LOCATION_NBR in the prompt, like this you can create as many as you want to display it in the header.
The next step is to display the value the user selects in the prompt that should display in the header, for that , you can create narative and like the following things and achieve it.
<table>
<tr>
<td bgcolot ="#00080" width="1500" height="25" align="center">
The location No is @{LOCATION_NBR}
</td>
</tr>
</table>
Since we define the presentation variable in Prompt and use it narative view we able to display the header based on the customer choose it from prompt
I hope the above explanation will resolve your requirement
Regards
Raj

How to sort data in descending order when user clicks on the column heading

Hi
I have a report called "Top customers", which shows the top customers for a specific product line. It displays the customer name and one column with the total amount spent in the period for each product line. By default, the leftmost product line is sorted in descending order.
If the user wants to know who are the top customers for another product line, they simply click on the column heading to sort the list by that column.
The problem is that when you click for the first time on a sortable column heading, Apex sorts it in ascending order; you need to click on the same column heading again to sort in descending order.
Is it possible to change this behaviour and sort the data in descending order in the first click? So the users don't have to click twice...
Thanks
Luis
PS: Apex 3 running on Oracle 10.2.0

Luis,
See: Can I "catch" a click on a sortable column header of a report?
Take a look at Anton Nielsen's answer with regards to hiding a column and displaying its value instead of the sortable column.
Asumming the following simple report query:
select product,sales
from <table>
Change that into:
select product
,sales*-1 as reverse_sales -- Select this one as an extra column
,sales -- Hide this column
from <table>
In your report column attributes (of column reverse_sales), html-expression, type #sales#. It then displays the normal sales. However apex will generate a 'order by 2 asc' for the first time. The '2' will refer to the sales*-1 value: sorting it asc, is the same as sorting sales descending...
Toon

Show the period value in column header using Text Variable

We are using Posting Period & Financial Year to calculate YTD & MTD, for current year and previous years. These posting period and financial year characteristics are custom created characteristics we are using due to customer specific requirement.
Input values are posting period, financial year and numeric value. To calculate previous year, I need to subtract numeric value from the input financial year. Every thing is working fine up to this.
In the report I need to show the posting period and financial year values dynamically in each column header of the report for MTD, YTD for current year & previous year. I tried to achieve this using Text Variables, but I didnt succeed. If some one can give me some idea to resolve this, it would be very helpful.
I am excellent in ABAP coding. If you can specify me to code in User Exit, I can do it.
Column headers should be 08.1999 Sales Qty, 08.2008 Sales Qty, 1999 Sales Qty, 2008 Sales Qty.

Hi Abhinav,
Try using the content text variables 0T_FYEAR and 0T_FPER3, when used in the head these variable should display the year and period specified in the RKF.
e.g
&0T_FPER3&. &0T_FYEAR& Sales Qty = 08.1999 Sales Qty
If that doesnt work, try creating text replacement path variables referencing the variables you created for the year and period input. To do this click on the RKF and click on the dropdown by the yellow box next to the description on the general tab and select New Variable, enter the description, tech name and set processng by to Replacment Path, then select period as the ref. characteristic, then on the replacement path tab change replace variable with to variable and then select the variable you are using for the period input, save then hit ok, this is now a text representation of the variable your are inputing for period and can be used in the column headers, you will need to repeat the process for the fiscal year.
Hope this helps
Josh

Column Heading in BI report

Similar Messages

Maybe you are looking for