Com.wm.app.b2b.server.ServiceException is coming while invoking https

Dear All,
Below exception is coming while invoking https service from business connector.
com.wm.app.b2b.server.ServiceException: [B2BSERV.0026.9102] Service 'pub.client:http' is not operational. To run this service, first recompile the Java source.
Any ideas, please share with me.
Thanks and Regards,

Dear Swarup,
Thank you for your fast response.
Till yesterday we are facing the below exception:
iaik.security.ssl.SSLCertificateException
For that we applied some patches, we are updated the JVM version from 5.1.020 to 5.1.024 according note:1249462.After that it is giving the same error. But Today morning it is satrts giving the below error.
com.wm.app.b2b.server.ServiceException: [B2BSERV.0026.9102] Service 'pub.client:http' is not operational. To run this service, first recompile the Java source.
Regards,

Similar Messages

SAP BC 4.8: com.wm.app.b2b.server.ServiceException: No IDoc found in input.

Dear all,
we have migrated from BC 4.7 to 4.8 with CoreFix 3 and all is working fine.
But now we want to create status reports when Idocs were sent from SAP System (ECC 6.0) to an http URL.
In the testphase there is a little program running in the background named "perlserver.exe" that listens on port 4242 an only shows the results on screen like e.g. the XML file.
When I send an Idoc, e.g. MATMAS03 to SAP BC, I get the following messages in BC error log:
- com.wm.app.b2b.server.ServiceException: No IDoc found in input, neither iDocList nor the IDoc tables
and
- com.sap.conn.jco.JCoException: (104) RFC_ERROR_SYSTEM_FAILURE: com.wm.app.b2b.server.ServiceException: com.wm.app.b2b.server.ServiceException: No IDoc found in input, neither iDocList nor the IDoc tables (raised by system DEBGHZCMBUCTST2|a_rfc)
The reports are created and sent to SAP system with idoc status 11 - com.wm.app.b2b.server.ServiceException: No IDoc found in input, neither iDocList nor the IDoc tables.
What can I do?
Have anyone an idea or better a solution?
Many thanks in advance.
Frank

Hi Lu,
Yes that note was for SPA BC 4.7. I though it could provide you with some more insight.
Anyway, can you recheck whether the settings which you have done for IDoc in SAP BC. There might be some problem with them.
Also check this thread, it might be helpful (but i am not sure)
[B2BSERV.0026.9201] Unknown service: wm.PartnerMgr
One doubt the error message says Unknown service: wm.PartnerMgr.flows.MANDANT001.. IS the client 001?
Regards
Suraj

Com.wm.app.b2b.server.ServiceException with Business Connector

Hi Everybody,
I could need some help with the Business Connctor 4.8...
We just made an upgrade from SAP Business Connector 4.7 to 4.8. The new Business Connector also was moved to another server.
The installation was fine. In SM59 the RFC test works and also the MAPS are all in green status.The routing should also be fine.
I have the following problem when using the FM IDOC_INBOUND_ASYNCHRONOUS to send invoices to the customers I get the following error:
com.wm.app.b2b.server.ServiceException: com.wm.app.b2b.server.UnknownServiceException: [B2BSERV.0026.9201] Unknown service: wm.PartnerMgr.flows.MANDANT001.1STBP:INVOIC
I also created and imported the necessary certificates to communicate with our partner by https.
Please could you help? Is it a problem in the configuration or do I miss something with the certificates?
Thanks in advance!
Kind regards,
Lu Huynh

Hi Lu,
Yes that note was for SPA BC 4.7. I though it could provide you with some more insight.
Anyway, can you recheck whether the settings which you have done for IDoc in SAP BC. There might be some problem with them.
Also check this thread, it might be helpful (but i am not sure)
[B2BSERV.0026.9201] Unknown service: wm.PartnerMgr
One doubt the error message says Unknown service: wm.PartnerMgr.flows.MANDANT001.. IS the client 001?
Regards
Suraj

Default DNS server unknown its coming while resolving`

Hi
i have windows 2012 domain controllers, able to successfully resolve dns queries.
But the problem is while resolving default server field its coming unknown. i created reverse lookup for dns server(Domain controller) after that host name is coming..
But after one day again hostname disappeared, default server field unknown coming..
If anybody knows this issue..

Hi,
Have you checked if the reverse lookup record is still present in the reverse lookup zone. Domain Controllers use dynamic registration to register A/PTR records for itself. Make sure Enterprise Domain Controllers group has permissions over the records so
these can be updated. This is found in on the security tab at the record/zone propetties. If you manually created the PTR record then it should have no timestamp therefore it will not be scavanged in case you enabled that function.
Hope this helps.
Regards,
Calin

B2B - Error While sending the document to GXS from Oracle B2B server.

When I am trying to send the document to GXS, getting the following error. This message is show in the window that pops up when you click on Reports->WireMessage->Details of the Message.
I am trying to find what is causing the issue.
State ERROR
Error Code B2B-50079
Error Description Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :sun.security.validator.ValidatorException: No trusted certificate found.
Error Text Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :sun.security.validator.ValidatorException: No trusted certificate found.
Here is the complete details from the Window.
Id 812E875712EA19A8EEC000005EF51ED3
Message Id 4e45f5dff566a29f:-ce624b0:12ea1982d56:-7ff3
Business Message 812E875712EA19A8E88000005EF51ED0
Packed Message Packed Message
Payload Payload
Protocol Message Id 4e45f5dff566a29f:-ce624b0:12ea1982d56:-7ff3
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding TO=Trader_Joes content-type=application/HTTPstream,actionrequest Content-Transfer-Encoding=binary FROM=AcmeSystems MESSAGE-ID=4e45f5dff566a29f:-ce624b0:12ea1982d56:-7ff3 DATE=Thu, 10 Mar 2011 21:09:43 GMT Connection=close Content-Type=text/plain; charset=us-ascii
Message Digest Message Digest
Digest Algorithm
Transport Protocol HTTP
Transport Protocol Version 1.1
Url https://web.tradinggrid.gxs.com/invoke/gxs.https/receive
security
Transport Headers TO=Trader_Joes content-type=application/HTTPstream,actionrequest Content-Transfer-Encoding=binary FROM=AcmeSystems MESSAGE-ID=4e45f5dff566a29f:-ce624b0:12ea1982d56:-7ff3 DATE=Thu, 10 Mar 2011 21:09:43 GMT Connection=close Content-Type=text/plain; charset=us-ascii
certificates certificates
State ERROR
Error Code B2B-50079
Error Description Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :sun.security.validator.ValidatorException: No trusted certificate found.
Error Text Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :sun.security.validator.ValidatorException: No trusted certificate found.
exchangeRetryInterval
exchangeRemainingRetry
Message Size 0
Here is the Setup We did sofar.
1) Created the Document Definition.
     PositionalFlatFile-VDA-1998-4913v4-4913v4_Definition
2) Created Trading Partner Profile
     Trader_Joes
3) Added Document Definition to the TP as receiver.
4) Configured a channel with Protocol "Generic HTTP-1.0". Is it showing only one entry, HTTP.
     Transport Protocol: Selected "HTTP" from the dropdown list.
     url: https://web.tradinggrid.gxs.com/invoke/gxs.https/receive
     username: xxxx
     password: xxxx
     Additional transport headers: content-type=application/HTTPstream,actionrequest=upload,receiverid=xxxxxxx,datatype=EDI,aprf=TEST,snrf=12345678
NOTE: I don't see tabs for "Exchange Protocol Parameters" and "Security". It only shows "Transport Protocol Parameters" and "Channel Attributes" tabs.
=====
5) Created Agreement with the document defition that was created.
6) Deployed the Agreement and it is showing "Active" state.
7) Created a Keystore on the server using the following command.
keytool -genkeypair -alias serverCert -keyalg RSA -keysize 1024 -validity 365 -dname "CN=soa.Acmesystems.com,OU=Support,O=Acmesystems,L=suntown,ST=MD,C=US" -keypass xxxxxxxxxx -keystore AcmeIdentity.jks -storepass xxxxxxxxxx
keytool -list -keystore AcmeIdentity.jks -storepass xxxxxxxxxx
8) Imported the certificate that we got from the GXS to the Key store using the following command.
keytool -importcert -v -noprompt -trustcacerts -alias ws-tradinggrid -file ws-tradinggrid.cer -keystore AcmeIdentity.jks -storepass xxxxxxxxxx
keytool -list -keystore AcmeIdentity.jks -storepass xxxxxxxxxx
9) After that When I run my composite bpel program to send B2B message, I am getting the above error.
Where is the issue?
Any help is appreciated.
Thank you
Krishna

We loaded the certificate chain into key store and that part is working now.
We are getting now the following error. Any Idea?
[2011-03-14T09:12:47.787-07:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.mediator.serviceEngine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@5fddbbc0] [userId: <anonymous>] [ecid: 0000Iup92C3CcpiF_7I7S61DUNHj000lw2,0] [APP: soa-infra] [composite_name: TestBusinessEventShipconfirmed] [component_name: TestBusinessEventMediator] [component_instance_id: E71EFFB04E5511E0BF70B592E6C64FAC] [dcid: 4e45f5dff566a29f:7f62e8ac:12ea26f8103:-7ffd-0000000000000012] [composite_instance_id: 50004] MediatorServiceEngine received a request for operation = Read
[2011-03-14T09:12:47.996-07:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.mediator.serviceEngine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@5fddbbc0] [userId: <anonymous>] [ecid: 0000Iup92C3CcpiF_7I7S61DUNHj000lw2,0] [APP: soa-infra] [composite_name: TestBusinessEventShipconfirmed] [component_name: TestBusinessEventMediator] [component_instance_id: E71EFFB04E5511E0BF70B592E6C64FAC] [dcid: 4e45f5dff566a29f:7f62e8ac:12ea26f8103:-7ffd-0000000000000012] [composite_instance_id: 50004] MediatorServiceEngine returning after processing the request for operation = Read
[2011-03-14T09:12:49.384-07:00] [soa_server1] [WARNING] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@c0ad9a3] [userId: <anonymous>] [ecid: 0000Iup92ObCcpiF_7I7S61DUNHj000lw3,0] [APP: soa-infra] [dcid: 4e45f5dff566a29f:7f62e8ac:12ea26f8103:-7ffd-0000000000000021] [[
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-403
StackTrace oracle.tip.b2b.transport.TransportException: [IPT_HttpSendError] HTTP encounters send error :403
com.wm.app.tn.err.EXMLException: <EXMLException>
<ErrorCode>0003.4089</ErrorCode>
<Info>Could not get internal ID for partner (id=null, typeCode=null, typeDesc=ICS Mailbox ID).</Info>
<OriginalException>
<JavaClass>com.wm.app.b2b.server.ServiceException</JavaClass>
<Message>"extID" is required.</Message>
<StackTrace>com.wm.app.b2b.server.ServiceException: "extID" is required.
     at wm.tn.profileimpl.getInternalID(profileimpl.java:2577)
     at sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:403)
     at com.wm.app.b2b.server.invoke.InvokeManager.process(InvokeManager.java:631)
     at com.wm.app.b2b.server.util.tspace.ReservationProcessor.process(ReservationProcessor.java:40)
     at com.wm.app.b2b.server.invoke.StatisticsProcessor.process(StatisticsProcessor.java:44)
     at com.wm.app.b2b.server.invoke.ServiceCompletionImpl.process(ServiceCompletionImpl.java:241)
     at com.wm.app.b2b.server.invoke.ValidateProcessor.process(ValidateProcessor.java:51)
     at com.wm.app.b2b.server.ACLManager.process(ACLManager.java:228)
     at com.wm.app.b2b.server.invoke.DispatchProcessor.process(DispatchProcessor.java:30)
     at com.wm.app.b2b.server.AuditLogManager.process(AuditLogManager.java:628)
     at com.wm.app.b2b.server.invoke.InvokeManager.invoke(InvokeManager.java:536)
     at com.wm.app.b2b.server.invoke.InvokeManager.invoke(InvokeManager.java:381)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:237)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:189)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:324)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:581)
     at com.wm.lang.flow.FlowState.step(FlowState.java:441)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:406)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1040)
     at com.wm.app.b2b.server.invoke.InvokeManager.process(InvokeManager.java:631)
     at com.wm.app.b2b.server.util.tspace.ReservationProcessor.process(ReservationProcessor.java:40)
     at com.wm.app.b2b.server.invoke.StatisticsProcessor.process(StatisticsProcessor.java:44)
     at com.wm.app.b2b.server.invoke.ServiceCompletionImpl.process(ServiceCompletionImpl.java:241)
     at com.wm.app.b2b.server.invoke.ValidateProcessor.process(ValidateProcessor.java:51)
     at com.wm.app.b2b.server.ACLManager.process(ACLManager.java:228)
     at com.wm.app.b2b.server.invoke.DispatchProcessor.process(DispatchProcessor.java:30)
     at com.wm.app.b2b.server.AuditLogManager.process(AuditLogManager.java:628)
     at com.wm.app.b2b.server.invoke.InvokeManager.invoke(InvokeManager.java:536)
     at com.wm.app.b2b.server.invoke.InvokeManager.invoke(InvokeManager.java:381)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:237)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:189)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:324)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:581)
     at com.wm.lang.flow.FlowState.step(FlowState.java:441)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:406)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1040)
     at com.wm.app.b2b.server.invoke.InvokeManager.process(InvokeManager.java:631)
     at com.wm.app.b2b.server.util.tspace.ReservationProcessor.process(ReservationProcessor.java:40)
     at com.wm.app.b2b.server.invoke.StatisticsProcessor.process(StatisticsProcessor.java:44)
     at com.wm.app.b2b.server.invoke.ServiceCompletionImpl.process(ServiceCompletionImpl.java:241)
     at com.wm.app.b2b.server.invoke.ValidateProcessor.process(ValidateProcessor.java:51)
     at com.wm.app.b2b.server.ACLManager.process(ACLManager.java:228)
     at com.wm.app.b2b.server.invoke.DispatchProcessor.process(DispatchProcessor.java:30)
     at com.wm.app.b2b.server.AuditLogManager.process(AuditLogManager.java:628)
     at com.wm.app.b2b.server.invoke.InvokeManager.invoke(InvokeManager.java:536)
     at com.wm.app.b2b.server.invoke.InvokeManager.invoke(InvokeManager.java:381)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:237)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:119)
     at com.wm.app.b2b.server.HTTPInvokeHandler._process(HTTPInvokeHandler.java:141)
     at com.wm.app.b2b.server.InvokeHandler.process(InvokeHandler.java:110)
     at com.wm.app.b2b.server.HTTPDispatch.handleRequest(HTTPDispatch.java:185)
     at com.wm.app.b2b.server.Dispatch.run(Dispatch.java:333)
     at com.wm.util.pool.PooledThread.run(PooledThread.java:118)
     at java.lang.Thread.run(Thread.java:595)
</StackTrace>
</OriginalException>
<Action></Action>
<Level></Level>
</EXMLException>.
     at oracle.tip.b2b.transport.TransportException.create(TransportException.java:94)
     at oracle.tip.b2b.transport.basic.HTTPSender.createTransportResponse(HTTPSender.java:683)
     at oracle.tip.b2b.transport.basic.HTTPSender.send(HTTPSender.java:498)
     at oracle.tip.b2b.transport.b2b.B2BTransport.send(B2BTransport.java:317)
     at oracle.tip.b2b.transport.TransportInterface.send(TransportInterface.java:1492)
     at oracle.tip.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1551)
     at oracle.tip.b2b.msgproc.Request.outgoingRequest(Request.java:837)
     at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1411)
     at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
     at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
     at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
[2011-03-14T09:12:49.390-07:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@c0ad9a3] [userId: <anonymous>] [ecid: 0000Iup92ObCcpiF_7I7S61DUNHj000lw3,0] [APP: soa-infra] [dcid: 4e45f5dff566a29f:7f62e8ac:12ea26f8103:-7ffd-0000000000000021] Request: outgoingRequestPostColab: Request Message Transmission failed
[2011-03-14T09:12:49.431-07:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@c0ad9a3] [userId: <anonymous>] [ecid: 0000Iup92ObCcpiF_7I7S61DUNHj000lw3,0] [APP: soa-infra] [dcid: 4e45f5dff566a29f:7f62e8ac:12ea26f8103:-7ffd-0000000000000021] Engine: processOutgoingMessageImpl: Message id = 4e45f5dff566a29f:7f62e8ac:12ea26f8103:-7ff0 ToParty = Trader_Joes Doctype = 4913v4 version = VDA-1998

Help! My iPod touch won't let me download any apps. A message keeps coming up saying "This Apple ID cannot be used for the iTunes store. Please enter another Apple ID" I changed my ID to see if that would work but the same message still comes up.

Help! My iPod touch won't let me download any apps. A message keeps coming up saying "This Apple ID cannot be used for the iTunes store. Please enter another Apple ID" I changed my ID to see if that would work but the same message still comes up.

Where are you physically located?
What country's Store are you using?
The two have to be the same and the payment method for your account also has to be associated (billing address, where iTunes gift card was purchased) with that country.
Has the ID(s) worked before for purchases for this country's store?

Dreamweaver cs4 come with a web server or web app server ?

dreamweaver cs4 come with a web server or web app server ? Or
can be configured [has menues for] web server local ? When running
a server localhost
http://localhost/... , this can be
run/view a file[in local server] without an internet connection ?
yes without / no needed ?

123polis123 wrote:
> dreamweaver cs4 come with a web server or web app server
? Or can be configured
> [has menues for] web server local ? When running a
server localhost
>
http://localhost/... , this can be
run/view a file[in local server] without an
> internet connection ? yes without / no needed ?
Dreamweaver does not ship with a web server, you have to
install one, or activate one on your system (IIS or Apache for
Widows and Apache for Mac are the common choices). When you define
a site within Dreamweaver you can specify a testing server, as well
as a remote server. If the testing server and/or remote server are
available to your system without an internet connection, then you
can certainly test pages through the web server such as through
http://localhost/
If you are creating HTML pages, then there is no need for a
server at all for creating and testing your pages, but if you are
working with PHP or ColdFusion, then you will need a web server to
work with.
If you have follow up questions, you should ask in the
Dreamweaver General forum (general Dreamweaver usage questions), or
the Application Development forum (questions about dynamically
generated pages), depending on what you're looking to do:
DW General:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=12&catid=189&entercat= y
App Dev:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=12&catid=263&entercat= y
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

B2B server startup

Hi,
I am getting the following exception when i tried to start my B2B server. The process-type = B2BServer does not start. But i could see the console of B2B and navigate in the server. Pls help
Exception in thread "main" java.io.IOException: No such file or directory
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.createNewFile(File.java:828)
at oracle.tip.runtime.admin.ProcessManager.lock(ProcessManager.java:178)
at oracle.tip.runtime.admin.ProcessManager.main(ProcessManager.java:245)
The above error is available in the B2B~B2BServer~B2BI02.dgda21b~1 log.

Hi,
Is your HTTP server fine?
Have you changed any of the config files?
Was the B2B server coming up after installation?
What you could try is:
1. go to services.msc
2. stop all B2B services
3. restart your machine
And see if the B2B Server comes up.
Thanks & Regards,
Suhas.

Publishing office 2013 on app-v server

Hi,
I'm trying to publish an office 2013 package that I have created using the ODT.
The technet guide (http://technet.microsoft.com/en-gb/library/dn817830.aspx) I am using is telling me to use this command 'Add-AppvClientPackage <Path_to_AppV_Package> | Publish-AppvClientPackage
–global'  from the client and then 'From
the Web Management Console on the App-V Server, you can add permissions to a group of computers instead of to a user group to enable packages to be published globally to the computers in the corresponding group.' from
what I can see it has worked as in I can now open word, excel etc.. but the package has not appeared on the appv server yet to allow me to configure permissions. Before attempting the above command I tried importing the package directly into the app-v
web management console but the app-v client could not see the package although it was in the correct security group.
Any pointers?
Thanks

+ note that it may take several minutes (10+) before a new published package appears on the client
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Distributed sessions for multiple web-apps in a single App. Server (v.8.1)

I have 3 applications on App. Server 8.1 (running on JDK 1.5)
App-A handles login
App-B and App-C are functions that are accessible after login is validated.
It works fine with App. Server 6.5 (JDK 1.3)
But the distributed session cannot be shared in App. Server 8.1 (JDK 1.5)
So App-A handles sign on and stores the user's Login Name on the session.
App-B and App-C read the user's login name from the session object and grant access to different modules.
1. Starting App-A and perform login
2. Starting App-B from App-A (it is linked there)
3. Starting App-C from App-A (it is linked there)
In step 1, a new session is created for the user, an attribute ("LoginName") is put in the session - ie. using HttpSession.setAttribute()
In step 2, the program checks for attribute "LoginName" from the session object - ie. using HttpSession.getAttribute()
If not found, redirect to login; if found, then continue with App-B
In step 3, same as in step 2 above.
It works fine with App. Server 6.5 but problem occurs in step 2 and 3.
web.xml of App-A, App-B and App-C:
<i>
<web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>App-A</display-name>
<distributable/>
</i>
sun-web.xml of App-A, App-B and App-C
<i>
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Application Server 8.1 Servlet 2.4//EN" "http://www.sun.com/software/appserver/dtds/sun-web-app_2_4-1.dtd">
<sun-web-app>
<session-config>
<session-manager persistence-type="memory">
<manager-properties>
<property name="persistenceFrequency" value="web-method"/>
</manager-properties>
<store-properties>
<property name="persistenceScope" value="session"/>
</store-properties>
</session-manager>
</session-config>
</i>

Distributed sessions has nothing to do with different web applications. The concept is about distributing load for the same application between several appserver instances running on the same box(different jvm) or on some other box in the network.
What you used with iAS 6.5 is not available in 8.1 because sharing sessions between web apps is forbidden by the servlet spec. You should consider repackaging your apps. into a single web app. or using other way of signing/verifying user identity(check Sun Access Manager for example).
Have a look at this thread as well: http://swforum.sun.com/jive/thread.jspa?threadID=100931

Hardware sizing recommendations for B2B Server

My customer Welch Foods Inc. is on 11i Oracle eBusiness Suite and is planning to uptake the latest 1Sync integration features in the PIM product. For out-of-box AS2 connectivity with 1Sync - they are planning to use Oracle B2B Integration Server 10.1.2.3.
They have an average transaction volume of 30 transactions per month. One time - initial load of 20,000 transactions.
Based on the above estimates, they are looking for hardware sizing recommendations for the B2B server.
Your assistance is much appreciated.
Asmi Maharishi
SDM for Welch Foods.

Thanks for your reply!
Here are the responses to your queries:
1. Is B2B instance going to run alone in a box
Yes, B2B instance will run alone on a box.2. what will be the size of message
Messages can be anywhere from 5-20 KB3. how many messages will be part of a transaction.
It should be 2 - Registration and publication. But sometimes it depends on how successful the first “registration” goes. Typically we get one or two errors that the users go into PLM, correct and re-send.However, Looking at your current requirement, 30 transaction per month, we can easily address in a 4 GB machine itself.
Additionally, Oracle B2B supports 10+ messages per second in 32GB, 4 processor machine.
Memory suggested above is 4GB, does that take into account memory used by the 10G App server foot print or this is only to take care of messages? Also, how many Processors (Risk IBM) will be needed?

OIM server is not coming up in Weblogic Install

Hello !
I am having issues trying to start my OIM deployed on a weblogic server. ( Iam trying to deploy OIM in a clusetered Env, where in OIM server is not coming up on the Admin Server host)
[Security:097533]SecurityProvider service class name for OIMAuthenticator is not specified..
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticator is not specified.
at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:342)
at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
Truncated. see log file for complete stacktrace
com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticator is not specified.
Thanks

Hello All !
Trace of the logs:
0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257202805420> <BEA-090511> <The following exception has occurred:
com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticator is not specified.
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)
at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)
at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticator is not specified.
at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:47)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)
at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)
at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<Nov 2, 2009 6:00:05 PM EST> <Error> <Security> OIM_SERVER1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257202805433> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticator is not specified..
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticator is not specified.
at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:342)
at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticator is not specified.
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)
at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)
at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticator is not specified.
at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:47)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)
at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)
at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<Nov 2, 2009 6:00:05 PM EST> <Notice> <Security> <OIM_SERVER1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257202805441> <BEA-090082> <Security initializing using security realm myrealm.>
####<Nov 2, 2009 6:00:05 PM EST> <Critical> <WebLogicServer> <OIM_SERVER1> <Main Thread> <<WLS Kernel>> <> <> <1257202805466> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Edited by: user597820 on Nov 10, 2009 8:48 AM

Oracle Apps Report Server -- how to find?

Hi,
When login in BI Publisher and for that ir is asking user name, password and Report server name. I am login remotely from client; how to find out the report server name...
user name = Apps
Password = apps
Report server = ?
Best Regard,
Subir

REP60_<SID>
Note: 393811.1 - How To Verify The Operation Of The Oracle Reports Server For eBusiness Suites 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=393811.1
Note: 204372.1 - How to Check Reports Server Setup for BIS Reports
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=204372.1

Planning App Web Server changed.

Hello gurús!
I´m in a big issue. In my org, we have 3 physical servers with 3 servers installed: Essbase, Shared Services and Planning. The problem is that we cloned that servers to virtual machines to duplicate these servers. We want to reconfigure that virtualized servers to work like that physical servers. Essbase and Shared Services was reconfigured succefully, but planning had problems with Web Logic licence. For that, we decided to change app web server from web logic to apache tomcat 5. After that, we reconfigure planning using the same instance, data sources and application that were in the source physical server. But it doesn´t work, because planning does not connect with apllications, and Workspace doesn´t not work properly. It only listen at port 45000 and did not at 19000 (like in physical server). Also, workspace cannot connect with planning (if we want to create a planning application it throws these errors: "Invalid or not find module configuration", "Required application module HyperionPlanning.planning is not configured. Please contact your administrator.", "Comunication Error".
Also, when I start workspace from Start->Programs->Hyperion.... In server console it throws a that Warning: "Please initialize the log4j System Properly". This maybe the reason because planning and workspace doesnt write any logs?
Thanks for your time floks.
Best regards,
Fabián

What did you do to clone, use a P2V vm conversion? What about hostnames and dns names ? Personally I don't believe trying to clone is a good idea.
Cheers
John
http://john-goodwin.blogspot.com/

Managed server is not coming up.

Weblogic Server 9.2 MP2 is running on RHEL 4.0. One of the managed server is not coming up. I did even try to create new managed node on this host. It is also failing with same exception.
Your help is highly appreciated.
Thanks in advance.
<Mar 11, 2009 9:47:32 AM> <Info> <NodeManager> <Working directory is "/opt/weblo
gic/bea92/user_projects/domains/wl9xdomain">
<Mar 11, 2009 9:47:32 AM> <Info> <NodeManager> <Server output log file is "/opt/
weblogic/bea92/user_projects/domains/wl9xdomain/servers/AccountMServer3/logs/Acc
ountMServer3.out">
<Mar 11, 2009 9:47:33 AM PDT> <Notice> <WebLogicServer> <BEA-000395> <Following
extensions directory contents added to the end of the classpath:
/opt/weblogic/bea92/weblogic92/platform/lib/p13n/p13n-schemas.jar:/opt/weblogic/
bea92/weblogic92/platform/lib/p13n/p13n_common.jar:/opt/weblogic/bea92/weblogic9
2/platform/lib/p13n/p13n_system.jar:/opt/weblogic/bea92/weblogic92/platform/lib/
wlp/netuix_common.jar:/opt/weblogic/bea92/weblogic92/platform/lib/wlp/netuix_sch
emas.jar:/opt/weblogic/bea92/weblogic92/platform/lib/wlp/netuix_system.jar:/opt/
weblogic/bea92/weblogic92/platform/lib/wlp/wsrp-common.jar>
<Mar 11, 2009 9:47:34 AM PDT> <Info> <WebLogicServer> <BEA-000377> <Starting Web
Logic Server with BEA JRockit(R) Version R27.2.0-131-78843-1.5.0_10-20070320-151
1-linux-ia32 from BEA Systems, Inc.>
<Mar 11, 2009 9:47:36 AM PDT> <Info> <Management> <BEA-141107> <Version: WebLogi
c Server 9.2 MP2 Mon Jun 25 01:32:01 EDT 2007 952826 >
<Mar 11, 2009 9:47:37 AM PDT> <Critical> <WebLogicServer> <BEA-000362> <Server f
ailed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141266]Parsing Failure in c
onfig.xml: invalid block type
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(Runtim
eAccessImpl.java:122)
at weblogic.management.provider.internal.RuntimeAccessService.start(Runt
imeAccessService.java:38)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesMan
ager.java:374)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServ
icesManager.java:125)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:630)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:67)
Caused by: java.util.zip.ZipException: invalid block type
at java.util.zip.InflaterInputStream.read(InflaterInputStream.java:140)
at java.io.FilterInputStream.read(FilterInputStream.java:111)
at java.io.ObjectInputStream$PeekInputStream.read(ObjectInputStream.java
:2213)
at java.io.ObjectInputStream$BlockDataInputStream.read(ObjectInputStream
.java:2618)
at java.io.ObjectInputStream$BlockDataInputStream.readFully(ObjectInputS
tream.java:2642)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:18
97)
at java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:47
9)
at java.util.ArrayList.readObject(ArrayList.java:583)
at sun.reflect.GeneratedMethodAccessor3.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:946
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1809)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1
719)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:19
08)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1832)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1
719)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at java.util.HashMap.readObject(Unknown Source)
at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:946
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1809)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1
719)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:19
08)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1832)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1
719)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at com.bea.staxb.buildtime.internal.bts.BindingFile.forSer(BindingFile.j
ava:77)
at com.bea.staxb.buildtime.internal.tylar.RuntimeTylar.getBindingFiles(R
untimeTylar.java:111)
at com.bea.staxb.buildtime.internal.tylar.RuntimeTylar.getBindingLoader(
RuntimeTylar.java:90)
at com.bea.staxb.runtime.internal.BindingContextFactoryImpl.createBindin
gContext(BindingContextFactoryImpl.java:66)
at com.bea.staxb.runtime.internal.BindingContextFactoryImpl.createBindin
gContext(BindingContextFactoryImpl.java:52)
at weblogic.descriptor.internal.MarshallerFactory.<init>(MarshallerFacto
ry.java:48)
at weblogic.descriptor.DescriptorManager$DefaultMarshallerFactorySinglet
on.<clinit>(DescriptorManager.java:40)
at weblogic.descriptor.DescriptorManager.getDefaultMF(DescriptorManager.
java:116)
at weblogic.descriptor.DescriptorManager.getMarshallerFactory(Descriptor
Manager.java:125)
at weblogic.descriptor.DescriptorManager.getDescriptorFactory(Descriptor
Manager.java:153)
at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorMana
ger.java:277)
at weblogic.management.provider.internal.DescriptorManagerHelper.loadDes
criptor(DescriptorManagerHelper.java:52)
at weblogic.management.provider.internal.RuntimeAccessImpl$IOHelperImpl.
parseXML(RuntimeAccessImpl.java:599)
at weblogic.management.provider.internal.RuntimeAccessImpl.parseNewStyle
Config(RuntimeAccessImpl.java:230)
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(Runtim
eAccessImpl.java:110)
... 7 more
>
<Mar 11, 2009 9:47:37 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to FAILED>
<Mar 11, 2009 9:47:37 AM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical
service failed. The server will shut itself down>
<Mar 11, 2009 9:47:37 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to FORCE_SHUTTING_DOWN>
<Mar 11, 2009 9:47:39 AM> <Info> <NodeManager> <Server failed during startup so
will not be restarted>
Edited by: user2656687 on Mar 19, 2009 12:42 PM

Hello there,
It seems you have some problem with the config.xml file, do you have the previous one like if you had done any recent change in config.xml or server configuration it has a backup.
So try rolling back the old config.xml file and start the weblogic, if that is not helping check if you ahve any chunk character in config.xml file.
Hope this helps.
Best Regards,
Arun J

Com.wm.app.b2b.server.ServiceException is coming while invoking https

Similar Messages

Maybe you are looking for