Combining files, assets, and snippets tabs

I took apart the files, assets, and snippets sidebar windows
from their single tabbed window, but now I want to put them back
together. How do I put more than one window on the same tabbed
window set??
I see something called "group files with", but it doesn't
work for windows that are already separated from the main grouped
windows.

Have you tried saving your preferred way as a custom workspace?
If not just try following -
In DW CS4 open up the panels in the way you want to and then go to Windows > Workspace Layout > New Workspace.
Once created you can select this as your default workspace so that each time you open up DW you see same setting.
Even if somehow it does not open in your custom workspace just go and click it once from the Windows > Workspace Layout (or from the workspace selection icon on the application bar - near top right of screeen.
Regards,
Vinay

Similar Messages

Combine Files dialog and File Size

In the Combine Files dialog box, in the lower right corner, the File Size icons are Small, Default, and Large. These settings are very vague. Does anyone know what the actual settings are that these icons use?

Throw it away. Go to the [http://commons.apache.org/fileupload] and carefully read both 'User Guide' and 'Frequently Asked Questions' sections.
And please, please also carefully read this article: [http://balusc.blogspot.com/2008/06/what-is-it-with-roseindia.html].

Combination file format and filter plug-in?

I am working with a file format plug-in. After reading in an image, I want to apply a filter to it. Is it possible to apply the filter from within the file format plug-in?
Alternatively, is there a means by which one plug-in can start another plug-in?

You will need to control this all via an automation plug-in. You will need three plug-ins.
1. The automation plug-in (AMP) will be a listener plug-in and 'listen' for eventOpen with your file format as the class. These needs to happen at Photoshop launch. (See Listener example)
2. User will open your file and your file format plug-in will run.
3. Your AMP will get called with the 'eventOpen' 'classMyPlugIn' or whatever you set up.
4. AMP will now call your filter plug-in.

Combining File Chooser and this MP3 class

Hello all,
I was curious if anyone could help me figure out how to get a file to actually load once it is used with this code.
I'm unfamiliar with how it works and I was hoping for an explanation on it.
I wasn't sure if I had to have the program recgonize that I would like to load a mp3 or if it just would load it automatically...
Essentially, I want to be able to load a mp3 if I use the file chooser.
I can try to clarify my question more if anyone should need it.
Thank you
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class List extends JPanel
                             implements ActionListener {
    static private final String newline = "\n";
    JButton openButton, saveButton;
    JTextArea log;
    JFileChooser fc;
    public List() {
        super(new BorderLayout());
        //Create the log first, because the action listeners
        //need to refer to it.
        log = new JTextArea(5,20);
        log.setMargin(new Insets(5,5,5,5));
        log.setEditable(false);
        JScrollPane logScrollPane = new JScrollPane(log);
        //Create a file chooser
        fc = new JFileChooser();
        //Uncomment one of the following lines to try a different
        //file selection mode. The first allows just directories
        //to be selected (and, at least in the Java look and feel,
        //shown). The second allows both files and directories
        //to be selected. If you leave these lines commented out,
        //then the default mode (FILES_ONLY) will be used.
        //fc.setFileSelectionMode(JFileChooser.DIRECTORIES_ONLY);
       // fc.setFileSelectionMode(JFileChooser.FILES_AND_DIRECTORIES);
        //Create the open button. We use the image from the JLF
        //Graphics Repository (but we extracted it from the jar).
        openButton = new JButton("Open a File...",
                                 createImageIcon("images/Open16.gif"));
        openButton.addActionListener(this);
        //Create the save button. We use the image from the JLF
        //Graphics Repository (but we extracted it from the jar).
        saveButton = new JButton("Save a File...",
                                 createImageIcon("images/Save16.gif"));
        saveButton.addActionListener(this);
        //For layout purposes, put the buttons in a separate panel
        JPanel buttonPanel = new JPanel(); //use FlowLayout
        buttonPanel.add(openButton);
        buttonPanel.add(saveButton);
        //Add the buttons and the log to this panel.
        add(buttonPanel, BorderLayout.PAGE_START);
        add(logScrollPane, BorderLayout.CENTER);
    public void actionPerformed(ActionEvent e) {
        //Handle open button action.
        if (e.getSource() == openButton) {
            int returnVal = fc.showOpenDialog(List.this);
            if (returnVal == JFileChooser.APPROVE_OPTION) {
                File file = fc.getSelectedFile();
                //This is where a real application would open the file.
                log.append("Opening: " + file.getName() + "." + newline);
            } else {
                log.append("Open command cancelled by user." + newline);
            log.setCaretPosition(log.getDocument().getLength());
        //Handle save button action.
        } else if (e.getSource() == saveButton) {
            int returnVal = fc.showSaveDialog(List.this);
            if (returnVal == JFileChooser.APPROVE_OPTION) {
                File file = fc.getSelectedFile();
                //This is where a real application would save the file.
                log.append("Saving: " + file.getName() + "." + newline);
            } else {
                log.append("Save command cancelled by user." + newline);
            log.setCaretPosition(log.getDocument().getLength());
    /** Returns an ImageIcon, or null if the path was invalid. */
    protected static ImageIcon createImageIcon(String path) {
        java.net.URL imgURL = List.class.getResource(path);
        if (imgURL != null) {
            return new ImageIcon(imgURL);
        } else {
            System.err.println("Couldn't find file: " + path);
            return null;
     * Create the GUI and show it. For thread safety,
     * this method should be invoked from the
     * event-dispatching thread.
    private static void createAndShowGUI() {
        //Create and set up the window.
        JFrame frame = new JFrame("FileChooserDemo");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        JComponent newContentPane = new List();
        newContentPane.setOpaque(true); //content panes must be opaque
        frame.setContentPane(newContentPane);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
}The mp3 class that I've been playing around with...
import java.io.BufferedInputStream;
import java.io.FileInputStream;
import javazoom.jl.player.Player;
public class MP3 {
    private String filename;
    private Player player;
    // constructor that takes the name of an MP3 file
    public MP3(String filename) {
        this.filename = filename;
    public void close() { if (player != null) player.close(); }
    // play the MP3 file to the sound card
    public void play() {
        try {
            FileInputStream fis = new FileInputStream(filename);
            BufferedInputStream bis = new BufferedInputStream(fis);
            player = new Player(bis);
        catch (Exception e) {
            System.out.println("Problem playing file " + filename);
            System.out.println(e);
        // run in new thread to play in background
        new Thread() {
            public void run() {
                try { player.play(); }
                catch (Exception e) { System.out.println(e); }
        }.start();
// test client
    public static void main(String[] args) {
        String filename = "C:\\FP\\1.mp3";
        MP3 mp3 = new MP3(filename);
        mp3.play();
}

Thanks for the link
I've been looking over the sections and still confused with the code.
It's obvious that I have to do something with this portion of the code:
public void actionPerformed(ActionEvent e) {
    //Handle open button action.
    if (e.getSource() == openButton) {
        int returnVal = fc.showOpenDialog(FileChooserDemo.this);
        if (returnVal == JFileChooser.APPROVE_OPTION) {
            File file = fc.getSelectedFile();
            //This is where a real application would open the file.
            log.append("Opening: " + file.getName() + "." + newline);
        } else {
            log.append("Open command cancelled by user." + newline);
}I'm just not sure what.

Site Files tab won't open, until assets or Snippets first

Vista 64bit (no choice) CS4 Dreamweaver. I have never figured out when it occurs but when I come back to the code view after searching online or other tasks the Files and Folders tab for the currently loaded site is no longer active. I have to click on Assets or Snippets before Files. It is a just a major inconvenience. The state is being forgotten and none of those three tabs resources show when you return.They are all minimized. I would much rather see the files directory than The CSS Styles tab taking half the space up.
Any ideas how to stop this behavior?
Thanks
Scott

Have you tried saving your preferred way as a custom workspace?
If not just try following -
In DW CS4 open up the panels in the way you want to and then go to Windows > Workspace Layout > New Workspace.
Once created you can select this as your default workspace so that each time you open up DW you see same setting.
Even if somehow it does not open in your custom workspace just go and click it once from the Windows > Workspace Layout (or from the workspace selection icon on the application bar - near top right of screeen.
Regards,
Vinay

Combine Files Dialog 8.1.6--drag and drop broken?

I just reinstalled Acrobat 8, and the Combine Files panel is "all whacky".
If I drag one or more documents into the panel, they are added normally. But if I then add another batch of 1 or documents, the FIRST SET OF DOCUMENTS is added again.
To be clear, if I drag documents 1.tif, 2.tif, and 3.tif into the Combine Files panel, I end up with (as expected)
1.tif
2.tif
3.tif
But if I then drag documents 4.tif and 5.tif into the panel (or any other set of documents), I end up with
1.tif
2.tif
3.tif
1.tif
2.tif
3.tif
Adding files through the file chooser panel works fine. Can someone tell me if this is peculiar to my installation or if it is a bug in Acrobat Pro 8.1.6?
Thx

Sort of the same here:
I just noticed that the standard "drag and drop" in combination with "cmd + tab" to switch applications no longer works on my MacBook Pro. Whenever I try to drag pictures (e. g. jpg) from Safari into a Keynote 09 presentation (switching from Safari to Keynote using "cmd + tab"), the dragged image simply hangs and cannot be dropped into Keynote.
And here's the _truly weird_ thing:
When I then use "cmd + tab" again to switch to the next app again, the Keynote window stays on top and I can suddenly move and drop the dragged picture again. How strange is that?

Combine files to PDF and selecting files one at a time - Adobe CreatePDF online application

Are you able to select up to 10 files at one time through the "select files" browser window? The instructions at https://www.acrobat.com/createpdf/en/merge-combine-pdf-files-online.html seem to indicate that you are able to select up to 10 items and then convert and combine.
"1 Sign in to your CreatePDF account online
2 Click on Combine files to PDF, then Select Files
3 Choose one or more files to merge into a single PDF
4 Click Open"
At this point I am only able to select files 1 at a time, which means steps 3 and 4 repeat up to 10 times if you are combining the maximum 10 files at once. I have tried using shift select and ctrl select to no avail.
Thank you for any help on this issue.

I think I found my answer at a different set of instuctions at http://helpx.adobe.com/acrobat-com/kb/using-createpdf.html. This set of instructions clearly indicates that files will be selected 1 at a time.
Click Combine Files To PDF.
Click Select Files.
Select one of the files that you want to combine.
Click Open.
Click Add Files and select additional files to combine. Click Open."
If anyone has any ideas on how to more quickly combine files, any help would be greatly appreciated.

Can anyone help with a Word 2007 and Acrobat 9 combine files problem?

Hi all
This may be a setup problem but I was unable to find an answer.
I have many word documents that use a style as Heading 1, 2 and 3. What I normally do is to use the Adobe option of "Merge Files into a Single PDF" and then select the documents I want and press combine. Adobe then combines all the documents into a single PDF taking all my headings (styles) and converts them into bookmarks.
I should say that is how I worked until a month ago.
My company upgraded my computer and reinstalled Adobe. Now I have the following problems:
The option of "Merge Files into a Single PDF" is no longer available from the Windows Explorer context menu. It is available from within Adobe.
When I use the option from within Adobe, it does not take the headings into account, so it does not create bookmarks from the styles.
When I create a PDF from within Word, I first check the Adobe Preferences and make sure that the "Convert Word Styles to Bookmarks" option is checked and that my heading styles are checked. Clicking "Create PDF" creates the PDF that I want.
By the way, I am using Word 2007 and Adobe Acrobat 9.

You need to define cell styles for your header and footer rows. Unfortunately there is no setting for cell height. You can force it by using a fixed First Baseline Offset combined with Top and Bottom Insets. This will produce rows that are 1p3 high:

Acrobat X: Combining Files to PDF hangs and refuses to load

So I am hoping someone can help me. I bought this product and installed it yesterday (10/16/12). I am running Windows 7 OS, and had no problem with the install. 10.1.4 is the version of Acrobat (more specifically) that I am working with. Today, when I go to combine files, It asks me to chose: File, Folder, etc...
When choosing "file" the program opens the explorer window to go find the file, but never fully loads. Then it just hangs forever.
This is primarily why I upgraded, since my Acrobat 8 couldn't handle the new Office 2010 stuff and refused to recognize those files. Now, I can't even get ANYTHING to load to combine.
Ideas/suggestions/fixes? Thank you!

hurricane_heide,
If you just bought Acrobat X, you may be elligible for a free upgrade to the latest and greatest Acrobat XI.
Obviously it should not happen. A few typical things to retry.
(1) Reboot. [Fixes all sorts of glitches]
(2) Turn off your virus and spyware protection does it work now?
(3) Try a clean install of the program. Run the Acrobat Cleaner tool. http://labs.adobe.com/downloads/acrobatcleaner.html
(4) Try as a different user.

"Files" and other tabs not visible for document library after script editor webpart is added

I created a document library and uploaded a few documents to ti. On the ribbon, I could see both "Files" and "Library" tabs. I then added a Script Editor webpart to this page because I needed to run some javascript on this
page. Now, when I go to that document library page (AllItems.aspx) then I don't see the Files and Library tab. My guess is that this is because these tabs are context sensitive so they only appear when Sharepoint knows you're working with a document
library and since now I have both the webpart that shows the document library and the Script editor webpart, that context is not there. If I click somewhere on the page close to the actual list of documents, then the Files and Library tabs reappear since
now Sharepoint knows that I'm working with a document library. Is there any way aroudn this? We don't want to have to ask our customer to click somewhere on the screen in order to get access to these tabs. I'm not sure why Sharepoint would
be confused by the Script editor webpart. It is not visible so when the page is not in edit more, you can't even see that Script editor. So, my question is: is there any way to:
- either find some other way of using javascript on this page (maybe external javascript file with some link to it on the page?
- or, some way to force the Fiels and Library tabs to be visible no matter what (i.e. despite having the Script editor webpart on the page).
I also experienced this issue when I wanted to insert some customized text on the same page that had a document library. For example, I created a document library and then on the AllItems.aspx page I inserted a content editor webpart so that I can
show some text at the top. That also caused the Files and Library tabs to disappear.
thanks,

Hi,
I understand Files/Libraray tab disappear after you add web parts to a document library, once you click somewhere in library list, it will appear again.
This is by design. As workaround, please try to use SharePoint Desginer to edit Allitems page of document library instead of using script web part.
https://social.msdn.microsoft.com/Forums/office/en-US/fd1bb098-6425-437c-b3f8-25bf65bcaad3/ribbon-control-disappears-on-sharepoint2013-document-libraries-when-content-editor-web-part-has?forum=sharepointdevelopment
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Converting and combining files to scale

I am trying to combine files for a pattern I am selling. The converter correctly sizes the word document to 8.5 x 11" but the pattern pieces with the drawings show up as much larger, like 11 x 15", so that when you try to print them to scale (100%) , it cuts off part of the pattern pieces. How can I fix this issue? I have already tried 4 times, and I have sold three of the patterns, not knowing it was doing this, so I have to correct it so I can resend the corrected pattern to the buyers!!! Help!!

Hi,
You can save these files in a FMT "text format" using menu
File ---> Administration -->Convert,
but The FMT format is not designed to be readable, then I have no idea what is the purpose of this file exists.
>>What is the best way to control version of this files on a CVS server ?
Version control ? For what ? You cannot read the contents of this file (FMT).
For me, FMT and FMB files as the same thing when you perform a import on your CVS server, maybe FMB is better, because is smaller then FMT.
Cheers

Is it possible to add the assets to a tab and have a homepage?

Hi, i'd like to add assets homepage (as i have contacts and accounts), i see in the application customizatio i can define assets homepage layout, but in the role configuration i cannot add asset as a tab, is that possible? why do i define a homepage if i cannot use it?
thanks

Not possible at this time. I believe the homepage customization has been done for any future enhancements.
What we have done for our customers is provide a custom tab that will pull up a report for all the assets

Combine Files and OCR

My team here has various files that we combine to make a report which we will then process and disclose. We need the files to be either OCR'ed or optimized to do our job effectively. Some of those files have renderable text and others do not (they are scans). Is there an option where we can combine while also OCRing the scanned docs?

We combine our reports and have the user OCR it before they begin their process. We combine both types of files, renderable and non-renderable, and then the user OCRs the mix. The process will skip the pages that don't need OCRing so I'm not sure where you are getting the idea that you can't.

HT4075 I don't have any problems merging the documents by dragging, but when I try to save and open afterwards, only the last shown doc was saved, not the combined files I wanted to merge. I tried save and export, how can I create the file after merging?

Hi, I'm having trouble saving the documents when merging in Preview. I don't have any problems merging the pdf documents by dragging them in preview, but when I try to save and open afterwards, only the last shown doc was saved, not the combined files I wanted to merge. I've tried save and export, but none merge the documents after saving... how can I create the file (with all the pdf files) after merging?

That's a comment in the file. It has no effect at all.

What is the best combination of read and write objects to binary files ...

Hi everyone,
what are the best combination of read and write objects to read/write a record of customers from a binary file. I should be able to use StringTokenizer. I am bit confused with all these Stream reader and writers.
abdul

You are, indeed, confused:
o StreamTokenizer works on character input, not binary input.
o Readers and Writers in general work on character streams, not binary.
That leaves you various input streams and output streams for reading binary data.

Combining files, assets, and snippets tabs

Similar Messages

Maybe you are looking for