Combining of two reports in universe

Hi all,
When we are getting data from SAP.Can we combine two reports in UNIVERSE.
What is the concept of merging Dimension.
Thanks,
Kiran.

Hi,
Linking of reports can be done in DeskI/WebI based on the tool/report we are using.
Merge dimension is a way to link the data from the two different universe or queries in a single BO report
by merging on common dimensions.
For universe linking we can do it in Designer.
Path: Universe Parameters (File-> Parameters) -> Links -> We can Link one universe with another/ add another universe to existing universe.
Cheers,
Suresh Aluri.

Similar Messages

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

Combine two reports in query designer

Hi experts,
i want to ombine two reports which are using key figure with sap exit in query designer
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi,
Have you tried APD?
You can combine them using workbook or from a multiprovider query. APD is another option. Have a look at these APD docs:
In APD, you can take input from two queries, then combine them and load to another object (DSO).
[Analysis Process Designer |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/413ba6c1-0d01-0010-1980-ec450e30f23c]
[AGSAP NetWeaver 7.0 Application Process Designer|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b06c3f96-ed4f-2a10-1693-f2c76a39988f]
Let me know where you r stuck...
Regards,
Ashish

How to combine two reports in obiee 10g(not union)

Hi Everyone
I have got a requirement where client is asking to combine two report to one
Report A has columns
"Region", "category" ,"in house " ,"sales" which can be shown by applying filters for current running year
Report B
Region,Category, Week5,week6, week7,week8 in this showing sales in individual week by using pivot view and limiting to four weeks
with a week filter
Now client req is to combine both reports into single one
region, category,inhouse,sales,week5,week6,week7,week8 here the issue is inhouse and sales data has show yearly data and week 5,week6,week7,week8 has to show weekly data .And weeks columns has to get updated automatically .
I am having a confusion in this will it possible to combine both reports, if possible pls help out how to do it
Regards
Sandeep
Edited by: Sandeep on Jul 31, 2011 9:20 AM
Edited by: Sandeep on Aug 1, 2011 1:43 AM

First of all, proof read your post. Generally, grammatical and punctuation errors can be deciphered, but where words are critical to presenting your issue clearly, you must type those sentences correctly. Otherwise, it can be confusing and turn off someone who may want to help.
"...which can be shown without and filters and want data for current year." What does this mean?
"...And weeks columns have to update its week no based on that week." What does this mean?
In an attempt to answer you question, do this:
1) Base your query filters on the "current running year." This will satisfy the requirements for displaying data from the first report.
2) Now add 4 "sales" columns (i.e., same column, but 4 instances of it). In each of these columns, click on the fx button, click on Filters, go to your Time dimension and select the appropriate week, and then click "OK." Now, each of these columns will hold the measure value for the particular week while the "sales" column will have the "running total" for the whole time period.
Once you get the above to work, you can work on automating this by substituting a function in place of the hard-coded week number values.

Combining two reports with headings and body into one

I currently have two seperate XML reports for Oracle projects. One report prints out all the Labor information. One prints out Expense information. The users want those two reports married into one. So if there was Labor data in the XML that would report would print first, break to a new page and Expense data in the XML the second report would print.
I have that working. Now what I need to find out how is how not to print anything if, for example, the XML had no Labor data. The way I have it configured now, even if no Labor data it is still printing the headings for the Labor.
Any suggestions?
Thanks,
Nancy

Thanks Vetsrini,
The report has parameters of project number and draft invoice number. The XML has always had both labor and expense on it.I orginally created 2 templates. One that only picked up labor and one that only picked up expense.
Now they want to just run one report and if both labor and expense print both out on same report, but seperating them.
BI Publisher 5.6.3
27459.xml is an example of xml that has no labor on it. just expense. so would just want the expense to print but the labor headers are showing up.
27267_Invoice1_Labor2.xml is an example of xml that has both labor and expense.
I you can look at that would be great.
How do I paste? Can I just email you?
Thanks!

Two reports combined in one Go URL

Hi All,
Can I include two reports in one Go URL? If so, Can you please tell me the syntax?
Thanks in advance.

add those two reports into a dashboard page and use that page in dashboard URL.

2 Report -Regions combine in 1 Report-Region but 2 different SQL-Querys

Hallo,
I have a question.
I have a page and within this page 2 different report-regions. Each of this regions has its own sql-query.
Now I would like to concentrate them in 1 report with one title. But there are still 2 differnet sql-query
that I can't combine. My issue is that I only want to show the result in one report.
Does this work or is there a workaround I could do?
Thanks, Jade

Hi,
As the report region's title is just whatever text you've entered, you can just put the title on the second report onto the first report and set the second report to use "No Template". You would probably need to remove the pagination settings for both reports - select No Pagination and set the row count to a high number.
The final bit would probably require a new report template - you can create a copy of the existing report template that you're using - and remove the Column Heading Template setting. This is only necessary if you need to remove the column headings from the second report. There would be a gap between the two reports - not sure if you need to remove this as well? If so, you would have to adjust both templates to remove the this from the bottom of the first report and the top of the second report.
I think that how you go about this will depend on exactly what you need to see between the two reports - if they need to look as though they are just a single report then you may have to complete all of the above steps.
Andy

Comparision Of Two reports

Hi All,
What would be the best way in BW to compare two reports? I have data collected from R/3 separately in an ODS & I have existing data in BW Cube, what would be best approach to do this.
This is required as a Part of reconciliation activity. Data needs to be compared of one existing report in BW & an existing report in R3. Requirement is to do it in a automotive way, hence not doing it manually using V-Look up in excel after dumping both the reports. Instead loading the R3 report data in a new ODS & then planning to link the Existing BW data using a new multiprovider.
Please suggest the optimum approach.
Thanks.
Kiron.

Hi Kiranmoy,
There is no Standard report comparision as such but we can follow certain steps for comparison,however wanted to know which module you are working on so that we can suggest you accordingly.
If it is related to SD module then we compare BI with VBAP and VBAK tables on a date basis or on a sales order basis.compare one sales order in VBAK/VBAP table to that SO in PSA or DSO or CUBE.
If it is MM we can compare with MB51 or MMBE or MB5B with the data in the report as Invenotory module has non inventory KFs.The comparison is donw with movement type or Material or PO Number or with or combination of all.
If it is FI then there are BSEG ,BSIK,BSID,etc to PSA/DSO/CUBE ...we compare according to the document number or referance number.
Hope this helps !!
Rgds
SVU123

Using member sorting and grouping with two reports sharing rows

Hi!
I have a problem with one report and I need some help or advise here.
I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
PRODUCT               MATERIAL          AMOUNT
TOTAL PROD_A-X                                   100
PROD_A_A             MAT1                          22
PROD_A_B             MAT1                          50
PROD_A_A             MAT2                          28
TOTAL PROD_B-X                                   120
PROD_B_A             MAT1                          30
PROD_B_A             MAT2                          50
PROD_B_B             MAT2                          40
This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
Thank you very much

Hi!
I have a problem with one report and I need some help or advise here.
I have two dimensions with dynamic expansion in rows (PRODUCT, MATERIAL), and I use the option Member Sorting and Grouping at Member selector to obtain the total amount of PRODUCT group by PARENTH1:
PRODUCT               MATERIAL          AMOUNT
TOTAL PROD_A-X                                   100
PROD_A_A             MAT1                          22
PROD_A_B             MAT1                          50
PROD_A_A             MAT2                          28
TOTAL PROD_B-X                                   120
PROD_B_A             MAT1                          30
PROD_B_A             MAT2                          50
PROD_B_B             MAT2                          40
This works fine if I only have one report, but I need to create another one sharing the row and page axis with the Default Report, when I do that the option Member Sorting and Grouping doesn't work. I really need to have two reports with shared rows and also the summation by PARENTH1, how can I do that?
Thank you very much

Two report join not working

I have two reports: Lead History(registered reciepents) and Campaign Reciepents History(email click-thru reciepents) with columns Full Name, Company/Account Name, and Job Title. I want to do a join that pull out the click-thru's that registered. Union and Union All gives me everything, Minus gives me just the click-thru's, and Intersect gives me nothing. What complicated join can I do to make this possible?

Thank you, Barney-15E and Nerowolfe.
First, you are right - I am using the 17" MacBook Pro (but not the ltest version).
Second, I looked in the Library folders and found Sidetrack in the Startup items. I deleted it (although I had already removed it from the Startup items in the System Preferences.
Third, I reset the PRAM.
However the 2-finger scrolling is still not working. I did notice (and I don't know if this is something new) that the cursor is now immobile when trying to use two fingers although it is fine with one finger. It as though the trackpad recognizes that two fingers are different from one, but it doesn't know what to do with two-fingers.
On a more general note, thank you all for your interest and quick responses. But...what should I try next? Apple suggests resetting the Power Management.

HT1473 My girlfriend and I both have iTunes account with our own music libraries and we want to combine our two libraries into one icloude accounts so can both then access our one shared libary at anytime in the cloud. How do we do this?

My girlfriend and I both have iTunes account with our own music libraries and we want to combine our two libraries into one icloude accounts so can both then access our one shared libary at anytime in the cloud. How do we do this?

No it is not possible. Content purchased from the iTunes Store is permanently tied to the account from which it was originally purchased, and Apple does not provide a way to change it.

I opened an itunes account then forgot my password. I opened a new account now I would like to combine my two accounts into one but I still can't remember my password and now I have a new email account. Help!

I opened an itunes account then forgot my password. I opened a new account now I would like to combine my two accounts into one but I still can't remember my password and now I have a new email account. Help!

You can't combine accounts but help here Apple ID FAQ's for resetting your Apple ID password.

HT201272 I have two iTunes account. How do I combine the two??

I have two iTunes account. How do I combine the two??

Did you recieve any response on your questions? I have teh same one can we load two itunes accounts onto one device? It seems apple should have some fix to address this...thanks for any insight you can provide.

HT3819 If my partner & I both have an iTunes account, can we home share both or somehow combine the two accounts?

If my partner & I both have an iTunes account, can we home share both or somehow combine the two accounts?

As of right now there is no way to combine Apple accounts.
As for "sharing", you can go into the iTunes settings for each and turn on Home Sharing, this will make your music libraries available to each other, provided you are both using different computers.

Two report outputs in a single screen

Hi,
I am looking at giving outputs of two reports in a single screen.
I mean one below the other.
We are using web reports and I want to have two reporst made out of differect cubes appear one below the other.
Kindly let me know if this is possible.
Suggestions will definitely be rewarded by giving points.
Regards,
Naveen

Hi Naveen,
In WAD, you can use Generic Navigation Block web item for displaying the Characteristics/Free Characteristics available in the Query.
In the specific properties tab(Web Item Properties->Specific->List of Characteristics) of this web item, you can specify the Characteristics/Free Characteristics which you want to be displayed in the web report.
Since you want the table web item(which shows the report having the free characteristics) to be affected by the drill down in Navigational block, then specify the data provider of table web item in the <b>Affected Data Provider</b> of the Navigation Block web item.
Naveen, it's not mandatory to check the affected data providers if the data providers for both Navigational Block web item and the Table web item are same.
Hope this helps.
Regards
Hari
Message was edited by: Hari Krishnan K

Combining of two reports in universe

Similar Messages

Maybe you are looking for