Combo Box if "word" do not print.
I have combo boxes that I want to set up so that if the box still says "select" that it will not print when i print the form. Is this possible?
Try this in the "Custom Validation Script"
if (event.value == "Select"){
event.target.display = display.noPrint
} else {
event.target.display = display.visible
Change "Select" to match whatever your value is in the combobox.
Similar Messages
-
The bottom of word do not print in MS Word. I have changed the spacing between lines, but that doesn't help. Any ideas?
Thanks, this was a good idea to try, however it doesn't seem to have helped.
I reset:
print.print_printer
Also tried resetting:
print.printer_Lexmark_6500_Series.print_footercenter
print.printer_Lexmark_6500_Series.print_footerleft
print.printer_Lexmark_6500_Series.print_footerright
print.printer_Lexmark_6500_Series.print_headercenter;
print.printer_Lexmark_6500_Series.print_headerleft
print.printer_Lexmark_6500_Series.print_headerright
Closed and restarted the browser.
I then selected URL in footer right in page setup but still it refuses to show in print preview or print on the page in hard print. It is most peculiar. Any other ideas? Thanks. -
Adobe Acrobat 9: Javascript array populated combo box - Selected answer will not save
I have a combo box on one of my forms that is populated using a Javascript array. The combo box is populating just fine, but when an item is selected from that combo box, the selected item does not save when the user saves the document. Any suggestions as to what the problem is and how it can be corrected? I am a loss as to where to even begin looking. Any help is greatly appreciated.
Thank you.
LisaYou might also want to check the Scripting forum
http://forums.adobe.com/community/acrobat/acrobat_scripting -
Bought new hp8600 plus printer. tried to print a page from word. will not print wireless.
Bought this HP8600Plus printer because it indicated wireless.
Installed disk and tried to print Word doc. It will not print.Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Word 2007 not printing to manual tray
Word 2007 on a windows 7 64 bit machine does not use selected tray when printing previously saved documents, but he can print to the manual feed tray when creating and printing new documents. User is printing to a
networked printer, which has been deleted and re-added to his system, print drivers looked at, and no one else has this issue with this printer on the server. He has been able to select and print to the manual feed tray with these exact documents until
recently (last couple days or so?). No windows updates have been installed recently.
Now he can only print to the manual feed tray in NEWLY created documents and not any previously created documents. Re-opened documents only print to tray 3. Settings are defaulted to "automatically select" in document and printer properties,
and that hasn't been changed recently either to cause the disruption in printing. Even when changing the settings to paper source "manual feed in tray 1" on both the printer properties and in the document, it does not print to the manual feed
tray.
What can I do to restore the function of printing to the manual feed tray without re-creating all his documents?Word 2007 on a windows 7 64 bit machine does not use selected tray when printing previously saved documents, but he can print to the manual feed tray when creating and printing new documents. User is printing to a
networked printer, which has been deleted and re-added to his system, print drivers looked at, and no one else has this issue with this printer on the server. He has been able to select and print to the manual feed tray with these exact documents until
recently (last couple days or so?). No windows updates have been installed recently.
Now he can only print to the manual feed tray in NEWLY created documents and not any previously created documents. Re-opened documents only print to tray 3. Settings are defaulted to "automatically select" in document and printer properties,
and that hasn't been changed recently either to cause the disruption in printing. Even when changing the settings to paper source "manual feed in tray 1" on both the printer properties and in the document, it does not print to the manual feed
tray.
What can I do to restore the function of printing to the manual feed tray without re-creating all his documents?
Try if this KB article resolves your issue:
The printer settings are ignored when you print a Word document
Hope this helps,
Daniel van den Berg | Washington, USA | "Anticipate the difficult by managing the easy"
Please vote an answer helpful if they helped. Please mark an answer(s) as an answer when your question is being answered. -
Having a combo box in a cell not to whole column
I want to have a combo box in a cell of a table but not the whole column.Please help me in this .Its very important to our project
Sorry , I don't want more space in cell.I want a combo box in a cell.But when i am setting the combo box it is applying to whole column and in every row i am getting a combobox .But i want to have a combo box in one row and a textfield in another row in the same column.
Note : I am taking the input for a form in that i want a combo for background color ,font,size etc but i want a textfield for label .I think u have understood.
thnx -
I am trying to print a table document and all words that follow a subscript dont print out, why?
eg 4th (subscript th) February and February doesnt not print only 4th.
Also why can you not subscript automticaly like in older version of Pages?Similar problem reported in Pages 5 table with bolding.
The only solution there was to scrap the whole table and start again.
90+ features have been removed by Apple.
Pages '08/'09 should still be in your Applications/iWork folder.
I suggest trashing/archiving Pages 5 after Exporting your files back to PAges '09 format.
Rate/review Pages 5 in the App Store, so others don't fall into the tarpit
Peter -
Combo box selected index is not working.
Hi guys, I have a problem with changing the combo box selected index.
I load a list of phone types(such as "Home","Office",...) using Remote Object and assign it as a data provider for a combo box.What I need is to select a specific index in the combo but combo.selectedIndex statement doesn't work for the first time, I mean the combo changes its index only if I load the view again.
I checked different examples, solutions but none of them worked for me!! Can anyone here help me to figure out the problem?
Here is my Code:
<mx:Canvas creationComplete="init()"
xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:ComboBox id="comboPhone0"
prompt="Type"
dataProvider="{phoneTypeList}"
/>
<mx:Script>
<![CDATA[
[Bindable]
private var phoneTypeList:ArrayCollection;
private function init():void
loadPhoneType();
private function loadPhoneType():void
phoneTypeLoaderService.getPhoneType(); //phoneTypeLoaderService is a remote Object to load the phone types
private function handlephoneTypeLoadResult(ev:ResultEvent):void
phoneTypeList=ev.result as ArrayCollection;
comboPhone.selectedIndex = getComboSelectedIndex("HOME");
private function getComboSelectedIndex(phoneType:String):int
var index : int= -1;
var result : int= -1;
for each (var pt:PhoneType in phoneTypeList)
if (pt.type == phoneType)
result = index;
break;
else{
index++;
return result;
]]>
</mx:Script>
</mx:Canvas>hi
I think in getComboSelectedIndex() method index should initialized to zero. If that does not work use after assigning the data from result event.
phoneTypeList.refresh();
Hope this helps
Rush-me -
MS Word text not printing on my HP Printer.
I installed MS Word 7 and I cannot get it to print text. Everything is hook up correctly and the printer will print the screen. I have checked everything, any suggestion?
Hi @Barbiegirl17 and welcome to the HP Forums!
I'm sorry to hear you've had issues printing black with your Photosmart 6510 printer, but I will absolutely do my best to lend a helping hand
I will suggest that you try the steps within this Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages document first. If that doesn't resolve the issue can you please let me know whether it's in or out of warranty and what country you reside in? Thanks!
Hope to hear back from you soon!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP -
Combo Box in a JTable not appearing
Hi Swing,
I have a snippet of code that I took from the Swing guide for JTables that adds a JComboBox into the 3rd column in the table. However, the ComboBox doesnt appear?
Can anyone see what is going wrong? Code is below:- I can post more if needed:-
public void addTable() {
tableModel = new MyTableModel(rows,columns);
relationTable = new JTable(tableModel);
//Set up the editor for the sport cells.
TableColumn sportColumn = table.getColumnModel().getColumn(2);
JComboBox allStaff = new JComboBox();
allStaff.addItem("Snowboarding");
allStaff.addItem("Rowing");
allStaff.addItem("Knitting");
allStaff.addItem("Speed reading");
allStaff.addItem("Pool");
allStaff.addItem("None of the above");
sportColumn.setCellEditor(new DefaultCellEditor(allStaff));
// set so only one row can be selected at once
relationTable.setAutoResizeMode( JTable.AUTO_RESIZE_OFF );
relationTable.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
// add to pane:-
JScrollPane scrollPane3 = new JScrollPane(relationTable);
scrollPane3.setBounds(X,Y,Z,W);
getContentPane().add(scrollPane3 );
}Cheershi
look I will give u a simple code I created based on your combo box
enjoy (:
import java.util.*;
import javax.swing.*;
import javax.swing.table.*;
import java.awt.*;
public class TablCo extends JPanel {
static JFrame frame;
JTable table;
DefaultTableModel tm;
public TablCo() {
super(new BorderLayout());
JPanel leftPanel = createVerticalBoxPanel();
//Create a table model.
tm = new DefaultTableModel();
tm.addColumn("Column 0");
tm.addColumn("Column 1");
tm.addColumn("Column 2");
tm.addColumn("Column 3");
tm.addRow(new String[]{"01", "02", "03", "Snowboarding"});
tm.addRow(new String[]{"04 ", "05", "06", "Snowboarding"});
tm.addRow(new String[]{"07", "08", "09", "Snowboarding"});
tm.addRow(new String[]{"10", "11", "12", "Snowboarding"});
//Use the table model to create a table.
table = new JTable(tm);
//insert a combo box in table
TableColumn sportColumn = table.getColumnModel().getColumn(3);
JComboBox allStaff = new JComboBox();
allStaff.addItem("Snowboarding");
allStaff.addItem("Rowing");
allStaff.addItem("Knitting");
allStaff.addItem("Speed reading");
allStaff.addItem("Pool");
allStaff.addItem("None of the above");
//DefaultCellEditor dce = new DefaultCellEditor(allStaff);
sportColumn.setCellEditor(new DefaultCellEditor(allStaff));
JScrollPane tableView = new JScrollPane(table);
tableView.setPreferredSize(new Dimension(300, 100));
leftPanel.add(createPanelForComponent(tableView, "JTable"));
JFrame.setDefaultLookAndFeelDecorated(true);
//Create and set up the window.
frame = new JFrame("BasicDnD");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Create and set up the content pane.
frame.setContentPane(leftPanel);
//Display the window.
frame.pack();
frame.setVisible(true);
protected JPanel createVerticalBoxPanel() {
JPanel p = new JPanel();
p.setLayout(new BoxLayout(p, BoxLayout.PAGE_AXIS));
p.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
return p;
public JPanel createPanelForComponent(JComponent comp,
String title) {
JPanel panel = new JPanel(new BorderLayout());
panel.add(comp, BorderLayout.CENTER);
if (title != null) {
panel.setBorder(BorderFactory.createTitledBorder(title));
return panel;
public static void main(String[] args) {
new TablCo();
} -
PDF created in MS Word does not print special characters correctly
I am having a problem with converting an MS Word document to a PDF. This document contains the Ohm symbol and the greater than or equal to symbol. I am using Word 2007 and Acrobat X Pro.
I am simply using the insert symbol feature in Word to insert the symbols. They appear fine in Word. When I print to PDF the Ohm symbol turns into an '&' and the greater than or equal to symbol turns into an 'e'.
A fellow I work with who has the exact same computer and program setup as me does not have this issue.
What can I do to correct this?
Thanks!
ChrisI tried all of the print/press options and they all do the same thing.
I have always used the pdf maker button from the MS Word ribbon.
I just tried using the print dialog and selected Adobe PDF with the 'high quality print' option that I need to use and this time it worked! But it is not really fixed as I make a lot of PDFs every day and need the one-click functionality.
In the PDFs that work and PDFs where the character fails I tried editing the text and it says that the font is substituted. In MS Word i am using Arial, Acrobat is using some "ArialMT" font that I never heard of.
The embeded fonts are also listed as ArialMT. -
Officejet pro 8500A Plus Word 2010 not printing in booklet any more
I have been successfully printing booklet mode - the reason for buying the printer. Now I cannot set the option in the printer properties of Word 2010
I am setting the radio button to booklet and it immediately unsets :-O
If it unsets how can I print booklet
In the properties for the printer I have set it to print booklet by default - but it shows the pages per sheet radio button checked each time.
But it works for PDF files...
What is not being set correctly?NOTE: The printer driver does not support manual duplexing. Two-sided printing requires an HP Automatic Two-sided Printing Accessory to be installed on the device
found online in user guide I am researching to find a printer that can do booklet printing -
Word 2013 not printing pictures
Hi all, you most likely would have seen a Word wont print pictures thread, but i assure your this is not the simple turn on draw backgrounds fix that most are! Unfortunately :(
The issue is;
A girl in an office in a building on a computer, the girl pastes a picture from the web and inserts it into her Word 2013 document that has just been created. The girl presses print, she acknowledges the print preview is what she wants the document to look
like and then hits the Print button.
Printer spools, spits out a page with text, but no picture.
I've tried multiple ways to get the print working, like allowing all web content, turning off the read mode, checking the draw pictures from word, checked printing background and colours, with no effect. I've also tried the microsoft registry fix.
She can print through Excel, PP, Project, Visio, all 2013 editions, no issue at all. ONLY seems to be Word, if she saves as > PDF, opens PDF > print = Works, not a solution but a workaround.
Any help would be much appreciated guys, i've never come across this.Hi,
Have you tried the methods of the
other thread which you posted?
I hope you have fixed the issue now, if you have any further situation, please let us know.
Have a good time.
George Zhao
TechNet Community Support -
The original, unedited pdf prints without the edits I have made. Used to be able to and can no longer do so. Any suggestions?
In the Print dialog, make sure that under "Comments & Forms" you select
"Document and Markups". -
How to populate the combo boxes that are created dynamically in jsp
Hi,
I am using JSP.
I am creating combo boxes dynamically (based on the num selected by the user). These dynamically created combo boxes need to have A-Z as options (each box) . Now, when the user chooses the option A in any of the combo-boxes,the rest should not have this option. so on..
how do i achieve this.Kindly help.You'll need to use JavaScript...I have a complicated example and a simple example, however, I cannot really understand the complex example but I know how it works. The looping is too complex for me.
First you'll need to populate a server side variable...depending on how often the data is updated you may want this to run each time a new session is created...this example is run each time Tomcat is started and the application context is initialized:
package kms.web;
// Servlet imports
import javax.servlet.ServletContextListener;
import javax.servlet.ServletContextEvent;
import javax.servlet.ServletContext;
// utility imports
import java.util.Map;
// domain imports
import kms.domain.LocationService;
import kms.domain.DeptService;
import kms.domain.PatentService;
* This listenter is used to initialize
* the Maps of Locations, Patents & Depts used to populate
* pulldown lists in JSPs
public class InitializeData implements ServletContextListener {
* This method creates the Maps.
public void contextInitialized(ServletContextEvent sce) {
ServletContext context = sce.getServletContext();
LocationService lServ = new LocationService();
// Create the Maps
Map campuses = lServ.getCampuses();
Map buildings = lServ.getBuildings();
Map floors = lServ.getFloors();
Map locs = lServ.getLocations();
// And store them in the "context" (application) scope
context.setAttribute("campuses", campuses);
context.setAttribute("buildings", buildings);
context.setAttribute("floors", floors);
context.setAttribute("locs", locs);
DeptService dServ = new DeptService();
Map depts = dServ.getDepts();
context.setAttribute("depts", depts);
PatentService pServ = new PatentService();
Map patents = pServ.getPatents();
context.setAttribute("patents", patents);
//I did this one myself
/* CodeService cServ = new CodeService();
Map masterMks = cServ.getCodes();
context.setAttribute("masterMks", masterMks);
* This method is necessary for interface.
public void contextDestroyed(ServletContextEvent sce) {
// I have no clue what the heck this is for???
// Let me know if you do!
}So now we travel into the PatentService method called 'getPatents();' which in turn calls a PatentDAO method
Map patents = pServ.getPatents();
Below is the code for the PatentService object:
package kms.domain;
import kms.util.ObjectNotFoundException;
import java.util.*;
* This object performs a variety of dept services, like retrieving
* a dept object from the database, or creating a new dept object.
public class PatentService {
* The internal Data Access Object used for database CRUD operations.
private PatentDAO patentDAO;
* This constructor creates a Dept Service object.
public PatentService() {
patentDAO = new PatentDAO();
public Map getPatents() {
Map patents = null;
try {
patents = patentDAO.retrieveAll();
// If the dept object does not exist, simply return null
} catch (ObjectNotFoundException onfe) {
patents = null;
return patents;
}It may be useful for you to see the code of the Patent class:
package kms.domain;
/*** This domain object represents a dept.
public class Patent implements java.io.Serializable {
private int codeGgm;
private String name = "";
private String description = "";
private int creator;
private String creationDate = "";
private int used;
* This is the full constructor.
public Patent(int codeGgm, String name, String desc, int creator, String creationDate, int used) {
this.codeGgm = codeGgm;
this.name = name;
this.description = desc;
this.creator = creator;
this.creationDate = creationDate;
this.used = used;
public Patent() { }
public int getCodeGgm() {
return codeGgm;
public void setCodeGgm(int codeGgm) {
this.codeGgm = codeGgm;
public String getName() {
return name;
public void setName(String name) {
this.name = name;
public String getDesc() {
return description;
public void setDesc(String desc) {
this.description = desc;
public int getCreator() {
return creator;
public void setCreator(int creator) {
this.creator = creator;
public String getCreationDate() {
return creationDate;
public void setCreationDate(String creationDate) {
this.creationDate = creationDate;
public int getUsed() {
return used;
public void setUsed(int used){
this.used = used;
}And here is the Database table which stores the Patents:
DESC PATENT:
CODE_GGM NUMBER(3)
NAME VARCHAR2(15)
DESCRIPTION VARCHAR2(250)
CREATOR NUMBER(10)
CREATION_DATE DATE
USED NUMBER(1)
So, we then travel into the code of the PatentDAO to see how the DAO object executes the DB query to get all of the Data we need for the select list:
package kms.domain;
import javax.naming.*;
import javax.sql.*;
import java.util.*;
import java.sql.*;
import kms.util.*;
* This Data Access Object performs database operations on Patent objects.
class PatentDAO {
* This constructor creates a Patent DAO object.
* Keep this package-private, so no other classes have access
PatentDAO() {
* This method returns a Map of all the Dept names
* The key is the Dept id
Map retrieveAll()
throws ObjectNotFoundException {
Connection connection = null;
ResultSet results = null;
// Create the query statement
PreparedStatement query_stmt = null;
try {
// Get a database connection
Context initContext = new InitialContext();
DataSource ds = (DataSource)initContext.lookup("java:/comp/env/jdbc/keymanOracle");
connection = ds.getConnection();
// Create SQL SELECT statement
query_stmt = connection.prepareStatement(RETRIEVE_ALL_NAMES);
results = query_stmt.executeQuery();
int num_of_rows = 0;
Map patents = new TreeMap();
// Iterator over the query results
while ( results.next() ) {
patents.put(new Integer(results.getInt("code_ggm")), results.getString("name"));
if ( patents != null ) {
return patents;
} else {
throw new ObjectNotFoundException("patent");
// Handle any SQL errors
} catch (SQLException se) {
se.printStackTrace();
throw new RuntimeException("A database error occured. " + se.getMessage());
} catch (NamingException se) {
throw new RuntimeException("A JNDI error occured. " + se.getMessage());
// Clean up JDBC resources
} finally {
if ( results != null ) {
try { results.close(); }
catch (SQLException se) { se.printStackTrace(System.err); }
if ( query_stmt != null ) {
try { query_stmt.close(); }
catch (SQLException se) { se.printStackTrace(System.err); }
if ( connection != null ) {
try { connection.close(); }
catch (Exception e) { e.printStackTrace(System.err); }
private static final String RETRIEVE_ALL_NAMES
= "SELECT code_ggm, name FROM patent ";
}Now when you wish to use the 'combo box' (also called select lists), you insert this code into your jsp:
<TR>
<%@ include file="../incl/patent.jsp" %>
</TR>
depending on how your files on your server are organized, the "../incl/patent.jsp"
tells the container to look up one directory from where the main jsp is to find the 'patent.jsp' file in the 'incl' directory.
I need some help creating multi-level select lists with JavaScript:
Can anyone explain this code:
<%@ page import="java.util.*,kms.domain.*" %>
<jsp:useBean id="campuses" scope="application" class="java.util.Map" />
<TR><TD ALIGN='right'>Campus: </TD>
<TD>
<select name="campus" size="1" onChange="redirect(this.options.selectedIndex)">
<option value="0" selected>No Campus</option>
<% LocationService ls = new LocationService();
Iterator c = campuses.keySet().iterator();
Map[] bm = new Map[campuses.size()];
Map[][] fm = new Map[campuses.size()][0];
Map[][][] lm = new Map[campuses.size()][0][0];
int i2 = 0;
int j2 = 0;
int k2 = 0;
int jj = 0;
int kk = 0;
while (c.hasNext()) {
Integer i = (Integer)c.next();
out.print("<OPTION ");
out.print("VALUE='" + i.intValue()+ "'>");
out.print( (String) campuses.get(i) );
out.print("</OPTION>");
bm[i2] = ls.getBuildingsByCampus(i.intValue());
fm[i2] = new Map[bm[i2].size()];
lm[i2] = new Map[bm[i2].size()][];
Iterator b = bm[i2].keySet().iterator();
j2 = 0;
while (b.hasNext()) {
Integer j = (Integer)b.next();
fm[i2][j2] = ls.getFloorsByBuilding(j.intValue());
lm[i2][j2] = new Map[fm[i2][j2].size()];
Iterator f = fm[i2][j2].keySet().iterator();
k2 = 0;
while (f.hasNext()) {
Integer k = (Integer)f.next();
lm[i2][j2][k2] = ls.getLocationsByFloor(k.intValue());
k2++;
kk++;
j2++;
jj++;
i2++;
} %>
</select></TD>
</TR>
<TR><TD ALIGN='right'>Building: </TD>
<TD>
<select name="building" size="1" onChange="redirect1(this.options.selectedIndex)">
<option value="0" selected>No Building</option>
</select></TD>
</TR>
<TR><TD ALIGN='right'>Floor: </TD>
<TD>
<select name="floor" size="1" onChange="redirect2(this.options.selectedIndex)">
<option value="0" selected>No Floor</option>
</select></TD>
</TR>
<TR><TD ALIGN='right'>Room: </TD>
<TD>
<select name="location_id" size="1">
<option value="0" selected>No Room</option>
</select></TD>
</TR>
<script>
var cNum = <%=i2%>
var bNum = <%=jj%>
var fNum = <%=kk%>
var cc = 0
var bb = 0
var ff = 0
var temp=document.isc.building
function redirect(x){
cc = x
for (m=temp.options.length-1;m>0;m--)
temp.options[m]=null
temp.options[0]=new Option("No Building", "0")
if (cc!=0) {
for (i=1;i<=group[cc-1].length;i++){
temp.options=new Option(group[cc-1][i-1].text,group[cc-1][i-1].value)
temp.options[0].selected=true
redirect1(0)
var group=new Array(cNum)
for (i=0; i<cNum; i++) {
group[i]=new Array()
<% for (int i=0; i< bm.length; i++) {
Iterator bldgs = bm[i].keySet().iterator();
int j = 0;
while (bldgs.hasNext()) {
Integer intJ =(Integer) bldgs.next(); %>
group[<%=i%>][<%=j%>] = new Option("<%=bm[i].get(intJ)%>", "<%=intJ%>");
<% j++;
} %>
var group2=new Array(cNum)
for (i=0; i<cNum; i++) {
group2[i] = new Array()
for (j=0; j<=bNum; j++) {
group2[i][j] = new Array()
<% for (int i=0; i< fm.length; i++) {
for (int j=0; j< fm[i].length; j++) {
Iterator flrs = fm[i][j].keySet().iterator();
int k = 0;
while (flrs.hasNext()) {
Integer intK =(Integer) flrs.next(); %>
group2[<%=i%>][<%=j%>][<%=k%>] = new Option("<%=fm[i][j].get(intK)%>", "<%=intK%>");
<% k++;
} %>
var temp1=document.isc.floor
var camp=document.isc.campus.options.selectedIndex
function redirect1(x){
bb = x
for (m=temp1.options.length-1;m>0;m--)
temp1.options[m]=null
temp1.options[0]=new Option("No Floor", "0")
if (cc!=0 && bb!=0) {
for (i=1;i<=group2[cc-1][bb-1].length;i++){
temp1.options[i]=new Option(group2[cc-1][bb-1][i-1].text,group2[cc-1][bb-1][i-1].value)
temp1.options[0].selected=true
redirect2(0)
var group3=new Array(cNum)
for (i=0; i<cNum; i++) {
group3[i] = new Array()
for (j=0; j<=bNum; j++) {
group3[i][j] = new Array()
for (k=0; k<=fNum; k++) {
group3[i][j][k] = new Array()
<% for (int i=0; i< lm.length; i++) {
for (int j=0; j< lm[i].length; j++) {
for (int k=0; k< lm[i][j].length; k++) {
Iterator locs = lm[i][j][k].keySet().iterator();
int m = 0;
while (locs.hasNext()) {
Integer intM =(Integer) locs.next(); %>
group3[<%=i%>][<%=j%>][<%=k%>][<%=m%>] = new Option("<%=lm[i][j][k].get(intM)%>", "<%=intM%>");
<% m++;
} %>
var temp2=document.isc.location_id
function redirect2(x){
ff = x
for (m=temp2.options.length-1;m>0;m--)
temp2.options[m]=null
temp2.options[0]=new Option("No Room", "0")
if (cc!=0 && bb!=0 && ff!=0) {
for (i=1;i<=group3[cc-1][bb-1][ff-1].length;i++){
temp2.options[i]=new Option(group3[cc-1][bb-1][ff-1][i-1].text,group3[cc-1][bb-1][ff-1][i-1].value)
temp2.options[0].selected=true
</script>
This produces a related select list with 4 related lists by outputting JavaScript to the page being served. It works the same way as the first example that I describe but I don't understand the looping...maybe someone could explain how to go from the single select list to a double and/or triple level drill down?
Maybe you are looking for
-
THe mail app on my ipad 2 quits right after launching. This happened as I was forwarding an email with a long attachment. Now I get a blank screen with just the icons, no mail mailboxes etc. after a few seconds that blank screen disappears and we go
-
HELP! Error while updating to the latest ios
I just tried to update my phone to the latest ios and an error occurred while it was updating the ios, my phone won't work now and iTunes doesn't recognize the phone, do I restore my phone?
-
I want to give my old iPod touch to a friend. How do I get my Apple account ID off of it so he can use his own password and account?
-
"You are not connected to the internet" but I am!
solved by using the search function.... https://discussions.apple.com/message/15684542#15684542 Sorry for posting too early.
-
Re: Lies, broken promises, loss of work, insulted,...
Oh My Goodness, this story is DE JA VU to my ongoing issues. Same scenario ordering a package on line, getting a confirmation contract both in the chat transcript I had online agent as well as a a confirmation email, to the package i ordered on the T