Comman separated output for a one-many relationship

I have 2 tables with one2many relation, viz product, subproduct, I wnat to output in the following way
i.e product and list of subproducts separated by commas
product1- sp1,sp2
product2- sp11,sp12
What would be the best way to handle this ?
The productis is the common key for the 2 tables.
Thanks In Advance.

This should do it.
SELECT PROD,
          MAX(SUBSTR (SYS_CONNECT_BY_PATH (SUB_PROD, '->'), 3)) AS SUBS
FROM (SELECT PROD,
     SUB_PROD,
     ROW_NUMBER() OVER
                    (PARTITION BY PROD ORDER BY LEG) CURR,
                    ROW_NUMBER() OVER
                    (PARTITION BY PROD ORDER BY LEG) - 1 AS PREV
     FROM (SELECT P.PROD,
                    S.SUB_PROD,
                              ROW_NUMBER() OVER
                              (PARTITION BY P.PROD ORDER BY P.PROD ASC) LEG
                         FROM PRODUCT P,
                         SUB_PRODUCT S
                    WHERE P.PROD = S.PROD
START WITH CURR = 1
CONNECT BY PRIOR CURR = PREV
AND PRIOR PROD = PROD
GROUP BY PROD

Similar Messages

Generating output for just ONE WebHelp page

Is it possible to generate output in RoboHelp 9 for just a single selected WebHelp topic instead of the entire project?
This is for a project with hundreds of topics, where occasionally I might make a change to only one of them and need to deploy just that one page of output. But I can only generate output for the entire project. The only options I seem to have are:
1. Output everything, and ignore or discard everything apart from the one htm page I want
2. As well as editing the source of the topic, also edit a copy of the previous output.
I'm assuming the answer is "no", having looked quite hard, but I thought it worth asking. Fortunately, it's not something I need to do very often - our agile methodology means I'm usually deploying an entire project very regularly.
Thanks
Nick Shears

Hi Nick
Just a few questions here.
Is the avoidance of generating the entire project related to the Source Control issue or is it related to a publishing issue? For example, you wish to put the single changed file in place on the serverm but you dislike having to copy them all?
If it's a "copy to server" issue, I might suggest you investigate using the Publish function. The first time you publish, all files are copied from your output folder to the server, But with each subsequent publish action, only the changed files that actually need to be copied are copied.
If it's related to source control, I suppose you could accomplish the same by simply amending your process a bit. Generate to the empty location, but configure publishing so it publishes from the empty location to your repository. Then only the necessary files are changed.
Cheers... Rick

How to change the fetch size for a one-to-many relationship

With Toplink 10.1.3, since using scrollablecursor is a prerequisites for changing the fetchsize on a query (using the setFetchSize), I am wondering if it would be possible to change the fetchsize of the query which is associated to a one-to-many relationship.
So, is this possible? How ?

In TopLink 10.1.3 you can set the fetch-size on any query, it has nothing to do with using a ScrollableCursor.
Example:
readQuery.setFetchSize(100);
To set the fetch size on a mapping query use,
mapping.getSelectionQuery().setFetchSize(100);
In 10.1.3 you can only set this in code, not currently through XML or the Mapping Workbench. In 10.1.3.1 you should be able to set the value through XML as well.

Using models for multiple one-to-many table relationships

Hi there!
I have a database with tables that have one-to-many relationships. They
are laid out with a standard join tables:
A     A_B     B     B_C     C
a_id     a_id     b_id     b_id     c_id
b_id     c_id
and has 1 A for n of B. In some cases, the B table also joins with
another table for yet more information.
My question: what technique should I use to organize a database of this
type into JATO Models?
I could create an AModel, for example, that would have a set of query
field descriptors for the information relevant from tables A and B. But
then how do I query table C when that information is necessary? Or,
more to the point, create information in C when a new entry in B is created.
Do the models use each other, or is that left up to the view bean (seems
incorrect for data isolation).
Any pointers appreciated,
Byron

Byron,
You can create a separate "modifying" model for each table and do
inserts/deletes/updates in a transaction across the tables with the
three models. That's really the easy part.
The somewhat more tedious part is the "join" models, but not hard to do.
You just have to decide what you need from the different tables and
quite possibly create multiple join models for different select scenarios.
So let's just run through a simple two table join model.
Create a SQL model. I usually name them based on the table joins. Let's
use a somewhat more real example:
table = customer
columns = custid, firstname, lastname, email
table = address
columns = addrid (seqid), custid (fk), type
('w'ork,'h'ome,'b'illing,'s'hipping,'o'ther), address1, address2, city,
state, zip
Suppose we want to select a customer and show a list of all his/her
addresses.
I would create a SQL model class (extending QueryModelBase of course)
called CustomerAddressJoinModel (this naming convention gets tough with
three or more tables, so you have to be creative).
In that model, I would create the fields just like any single table
model. You need only include the columns you need. Maybe you create one
join model that only has custid, lastname, firstname, type, city, zip.
OK, so we only cut out 2 columns, but you get the point. If you had a
table with lots of columns with data you rarely need to display and/or
update, then you can exclude them. Probably a slick way to exclude
dynamically, but this is straight forward.
Another join model could have all the columns of both tables.
So the trick is to set the static where criteria (using the
setStaticWhereCriteria method) in the model's constructor. I think the
sql model template has this in it.
setStaticWhereCriteria(customer.custid=address.custid);
Now you just set your criteria like any other model, and execute it.
For a 3 table join, you just set the static criteria like this:
tableA.aid=tableB.aid AND tableB.bid=tableC.bid
does that make sense?
You can also set the "modifying table" (setModifyingTable(table) - i
think that's right) in the model and inserts/updates/deletes will only
operate on that table within the model. Problem is maybe in the the
field binding in your views. You may want to select from one field, and
modify using another field. Can be done though, just not directly supported.
In the next release of JATO, you will be able to set a display fields
binding for read and write using different fields and even different models.
craig
Byron Servies wrote:
Hi there!
I have a database with tables that have one-to-many relationships. They
are laid out with a standard join tables:
     A     A_B     B     B_C     C
     a_id     a_id     b_id     b_id     c_id
     b_id     c_id
and has 1 A for n of B. In some cases, the B table also joins with
another table for yet more information.
My question: what technique should I use to organize a database of this
type into JATO Models?
I could create an AModel, for example, that would have a set of query
field descriptors for the information relevant from tables A and B. But
then how do I query table C when that information is necessary? Or,
more to the point, create information in C when a new entry in B is created.
Do the models use each other, or is that left up to the view bean (seems
incorrect for data isolation).
Any pointers appreciated,
Byron
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

What types of containers need to be used for one-to-many relationships

While looking at toplink examples, I noticed that synchronized containers only are being used for one-to-many relationships even though it's not required by the documentation.
Is it required?
Also how does merge affect it? I'm gettning concurrent modification exceptions from time to time, while using iterators for containers from these relationships.
Does it mean that I have to use enumeration on vectors only and toplink merge isn't atomic? So there is no isolation when toplink merges the data from unit of work into identity maps?
There is nothing about thread-safety and threading aspects of accessing containers for CollectionMapping based relationships. Please advise.

Non synchronized containers can be used but may require some extra code to handle concurrent access. If you are accessing the objects from the shared cache (not cloned in a UnitOfWork) then you will need to isolate your iteration within a synchronized block, synchronized on the collection itself, or handle the ConncurrentModificationException if they happen rarely.
Because these are shared instances of these collections other threads may be writing to them while they are being read from.
--Gordon

SQL functions extract and XMLSequence for a one-to-many (1:N) relationship

I have have the following XML document loaded into a XMLType table. I'd like to retrieve the lineitem id together with the purchaseorder id and report id. How would the query look like? I've tried a lot but this one-to-many relationship is killing me.
Many thanks!
<report id=...>
<purchaseorder id=...>
<lineitems>
<lineitem id=...>...</lineitem>
<lineitem id=...>...</lineitem>
<lineitem id=...>...</lineitem>
</lineitems>
</purchaseorder>
<purchaseorder id=...>
<lineitems>
<lineitem id=...>...</lineitem>
</lineitems>
</purchaseorder>

You can easily modify the above query to your needs:
SQL> with qry as (
2 select t.column_value.extract('/report/@id') report_id,
3         t.column_value.extract('/report/purchaseorder') purchaseorder,
4         t.column_value.extract('/report/purchaseorder/lineitems/*') lineitems
5 from table(xmlsequence(xmltype('<document>
6                                    <chapter>
7                                      <report id="1">
8                                        <purchaseorder id="1">
9                                          <lineitems>
10                                            <lineitem id="1">Item 11</lineitem>
11                                            <lineitem id="2">Item 12</lineitem>
12                                            <lineitem id="3">Item 13</lineitem>
13                                          </lineitems>
14                                        </purchaseorder>
15                                        <purchaseorder id="2">
16                                          <lineitems>
17                                            <lineitem id="1">Item 21</lineitem>
18                                          </lineitems>
19                                        </purchaseorder>
20                                      </report>
21                                      <report id="2">
22                                        <purchaseorder id="1">
23                                          <lineitems>
24                                            <lineitem id="1">Item 31</lineitem>
25                                            <lineitem id="2">Item 32</lineitem>
26                                          </lineitems>
27                                        </purchaseorder>
28                                        <purchaseorder id="2">
29                                          <lineitems>
30                                            <lineitem id="1">Item 41</lineitem>
31                                            <lineitem id="2">Item 42</lineitem>
32                                          </lineitems>
33                                        </purchaseorder>
34                                      </report>
35                                    </chapter>
36                                  </document>'
37 ).extract('/document/chapter/*'))) t)
38 select q.report_id,
39         q1.column_value.extract('/purchaseorder/@id') purchase_id,
40         q2.column_value.extract('/lineitem/@id') lineitem_id,
41         q2.column_value.extract('/lineitem/text()') lineitem
42 from qry q,
43       table(xmlsequence(q.purchaseorder)) q1,
44       table(xmlsequence(q1.extract('/purchaseorder/lineitems/*'))) q2
45 /
REPORT_ID PURCHASE_ID     LINEITEM_ID     LINEITEM
1          1               1               Item 11
1          1               2               Item 12
1          1               3               Item 13
1          2               1               Item 21
2          1               1               Item 31
2          1               2               Item 32
2          2               1               Item 41
2          2               2               Item 42
8 rows selected.
SQL>

Using data from one-to-many relationship

Hi,
i have an one-to-many relationship among two tables similar to the structure as in the below reference:-
[One-to-many-reference|http://docs.oracle.com/cd/E23507_01/Platform.20073/RepositoryGuide/html/s1204repositoryexamplefonetomanymappi01.html]
taking this as an example, i have the city's name with me. using this data in the addr_tbl in the 'address' item-descriptor, i need to get the value of the 'name' in the usr_tbl in the 'user' item descriptor. i will have the list of 'city' with me which i have to iterate and display the corresponding 'name'.
will i be able to perform this in the jsp itself or does it have to be done in java? a sample code snippet or reference for doing this will be of much help.
thank you.

Thanks a lot, Sheik.
if i have to do the reverse, ie for the 'name' in the usr_tbl of user item-descriptor i have to fetch the 'city' values in the addr_tbl, will it suffice if i do the following?
<dsp:droplet name="/atg/dynamo/droplet/RQLQueryForEach">
<dsp:param name="queryRQL" value="name=\"sirius\""/>
<dsp:param name="repository"
value="/com/MyRepository"/>
<dsp:param name="itemDescriptor" value="user"/>
<dsp:oparam name="output">
<dsp:valueof param="element.address.city"/>
</dsp:oparam>
</dsp:droplet>

Merge Two Reports in Excel Analyzer - One To Many Relationship

I want to show AR Data with CO Data - e.g. a bill + Income and it's associated account ssignemnt on the FI/CO side. I want the report to be able to show a cost centre manager to be wary of the income credited to their cost centre when a debtor has been raisedaas they may not fully pay the bill. To do this I'm using the standard DSO for AR & GL line items. Fisrtly I run a query on GL line item data where the user can select from a cost centre variable to look at credits to their cost centre. This produces a list of source documents that are used (via replacement path variable) in a second query. The second GL Query gives me a list of the allocation numbers for those line items. Had to be two queres as there are two GL postings that needed linking (this is because the cost assignment comes from a ceratin acc type and the debtor information comes from another acc type). I then use the allocation number (again via a replacement path variable) to run a third query on the AR data that shows all bills and payments linked to that allocation number. It seems to work ok.
However I have put these three queries in an Excel Analyzer workbook. All the user does is enter a cost centre when running the report. Each query is on a different sheet but what I'd like to do is merge the data on to the one sheet. I want to see the bill and it's payments from the AR data matched up with the cost assignment from the FI/CO data. This would be a one to many relationship e.g. one bill may have it's cost assignment split over more than one cost centre. Is there anyway to do this using simple excel functionality?
So I'd like to see:
Allocation No. 12345 Bill £100 Revenue £50 Cost Centre 1234 £25
Cost Centre 2345 £25
Anybody any ideas?

Hi,
Thanks for your answers.
I did explore using infosets but really struggled with joining the data and getting a sensible output. For example where a bill was done in installments I was getting 12 lines (e.g. one for each month) rather than just one. THis meant it looked liked they'd paid twleve times as much etc.
I did also try report to report. Which to my mind worked ok. Except the customer wanted it all in "One" report rather than having to drill down to see data.
I'll try a multiprovider but I'm worried that I'll end up with similar issues as I had when using the infoset.
Cheers
Joel

SELECT on One to many Relationship

Hi am trying to run a select statement on one to many relationship.
TableA is the main table with acount number and Total_Payments
TableB,TableC and TableD have a lot of account number and payments
per day
Note an account might on TableA might not be on TableB or TableC since it was not paid for that day hence 'if it is Null i'll like to populate a zero.
OUTPUT should be :
TableA.Account_No | Total_Amount(amounts from TableB/C/D)
Regards.

Hello,
Please refer to the following statements. If I have any misunderstand, please post the DDL of the tables and sample data for further analysis:
SELECT A.account, SUM(ISNULL(B.payment,0)+ISNULL(C.payment,0)+ISNULL(D.payment,0)) As Total_Amounts
FROM TableA A LEFT JOIN TableB B ON A.account=B.account
LEFT JOIN TableC C ON A.account=C.account
LEFT JOIN TableD D ON A.account=D.account
GROUP BY A.Account
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

ONE-to-MANY relationship between tables and forms in APEX

I recently started using APEX and I have run into an issue.
I have a ONE-TO-MANY relationship between two tables, A1 and A2, respectively.
A1:
A1_ID
Item
A2:
A2_ID
SubItem
A1_ID
I have 2 forms (lets call it F1 and F2) that I use to capture data for A1 and A2.
On F2, I have the following fields that are setup to capture data:
A2.A1_ID
**A1.Item (this is a drop down that is populated using a SELECT statement where the select uses A1.Item field)
A2.SubItem (user would enter SubItem)
Note: A2.A2_ID is populated using a SEQ
Everytime I pick **A1.Item on F2, is there a way to link to A1 table and display A1.A1_ID for every **A1.Item selected on F2?
If so, I want to store the value captured in F2 for the A1_ID field into A2 table to maintain my 1-to-MANY relationship.
If this will work, how do I go about implementing this solution?
Can someone help me?

I think it sounds like you are asking for a Master-Detail form. Try that and see what you get.
chris.

How to insert data in a one-to-many relationship

How do you insert data into the client, my model entity beans have a one-to-many relationship.
PARENT ENTITY BEAN
PARENT-ID
PARENT-NAME
The ejbCreate(Integer parentID,String name)
CHILD ENTITY BEAN
CHILD-ID
CHILD-NAME
PARENT-ID(foreign key of PARENTID).
ejbCreate(Integer parentID,String name,String foreignparentID)
In a jsp page i collect the parent details and 3 corresponding chld details in a text box.
Can you please tell me how do i proceed from here...
ie. how to i insert data into the entity beans..
Do i pass the child as a collection, and within parents ejbCreate() method do i lookup for the childs home interface and insert one -by -one from the collection.
1. Considering the above example, can some one pls tell how the ejbCreate() mehod signatures, for the parent and child entity beans should be.
2. Pls also show some sample client code as to how to make an insertion.
3. In case you are passing a collection of child data, then in what format does one have to insert into a collection and also how does the container know how to insert the values in the child table , bcoz we are passing as a collection.
4.In case collections cannot be inserted do we need to iterate into the collection in parent's ejbCreate() method, and manually insert into the database of the childtable, thereby creating child entity beans.
Thanks for your time and support...
regards
kartik

Hi,
3. In this case of course child's ejbCreate(and postCreate) looks like
ejbCreate(Integer childID,String name,ParentLocal parent) {
setId(Id);
setName(name);
ejbPostCreate(Integer childID,String name,ParentLocal parent) {
setParent(parent);
Here you don't need IDs, but it happens only using Locals, not Remotes, if I'm not wrong. Container does it itself.
1. Of course, if you have parent.getChildren() and parent.setChildren() then you don't need any loops, but it should be done anyway in postCreate, because in ejbCreate there no parent exists yet.
Once more 3: example - I'm using JBoss 3.2.5 as EJB container. It has tomcat inside and EJB and JSP+Struts use the same jvm. It means for me that I don't need to use remote interfaces, just locals. And in this case I can implement ejb-relations. So, a have the abstract method parent.getChildren() which returns Collection of ChildLocal - s and method parent.setChildren(Collection childrenLocals) which creates/modifies children by itself.
I have not used remotes for a long time, but as I remember it was not possible to implement ejb-relations using remotes.
regards,
Gio

Struggling with a one to many relationship in a sub-report

Post Author: Scott_tansley
CA Forum: General
I have a database schema as per below: tblENQUIRY tblDatasheets tblReportParasIRSID (PK) 1 --> & IRSID (FK) UID (PK)Attribute1 SHEETID (PK) 1 > & SHEETID (FK)Attribute2 Attribute1 LIST_ORDER tblStandardParasAttribute3 Attribute2 PARA_CODE (FK) & < 1 CODE (PK)etc... Attribute3 TEXT etc...
The PROBLEM I am a Crystal Reports Newbie, and having to work through things bit by bitu2026 I've managed to achieve quite a lot, but I'm totally stuck with this and would appreciate some help. I need to create a report (essentially a letter and some datasheets) around a one-to-many relationship, which I have managed to compile using a main report (for the one [tblENQUIRY]) and sub report (for the many [tblDatasheets]). Essentially I need a covering letter, then the u2018manyu2019 datasheets, and then a number of other pages (which are largely static text). I have created a main report which includes the covering letter, holds a subreport for the datasheets, and then contains the text for the additional pages. This all works fine, and I get the correct number of datasheets for each main report. My problem stems from the use of this sub report. This sub-report needs to hold some attribute values for each datasheet, which is fine. However, on each datasheet page I need to have some paragraphs, which are held in another one to many relationship. Each datasheet may have up to six paragraphs held as a code in tblReportParas, with a relationship to the text as held in tblStandardParas. My original thought would have been to embed another sub report, containing the values from tblStandardParas!TEXT, into the first sub report. However, I have found that it is not possible to have a sub-report inside another sub-report. I had seperated the first sub-report out from the main report, and then embedded another sub-report into it. This worked fine until I tried to stitch the sub-report back into the main report (at which point the sub-sub-report dissapeared from view). I have therefore reworked my sub-report a little, and the attribution is now stored in a pageheader, with the tblStandardParas!TEXT in a detail section below it. This almost works! The only problem is that there is no relationship between the pageheader and detail sections. To clarify, I would expect to have one datasheet, with the attribution at the top, and then the six paras below. Then, the same on the next page (assuming there is a second datasheet) for that report. Instead, I get the correct attribution, but the detail section actually gives every paragraph in the database, no matter which datasheet/or report it related to! I therefore need to limit the detail section to only show those paragraphs where the SHEETID in tblReportParas is the same as the tblDatasheets SHEETID. Any offers of advice would be appreciated.

Post Author: Scott_tansley
CA Forum: General
I managed to resolve this myself in the end. I moves the tblEnquiry data into report header/footer sections, this allowed me to add the tblDatasheets information into the details section, which gave me multiple pages - and then finally, the Paragraphs were added through the use of a sub report.
There's probably an even better way, but for now it works, it's quick - and so I'm going to go with it!
Thanks for your interest.

Defining a many-to-many relationship with CMP EJBs : does it work for you

Curious to know whether someone has been able to set up a many to many relationship between two entity beans.
I have been struggling with this for days now and I can't get it to work.
In my test project I have two entity beans, resp. Consultant and Solution.
Consultant has a cmr field called 'solutions', which is a collection object from the opposite side (Solution).
This is the source of the ejb-jar.xml file
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN" "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
     <description>EJB JAR description</description>
     <display-name>EJB JAR</display-name>
     <enterprise-beans>
          <session>
               <ejb-name>ProfilerBean</ejb-name>
               <home>com.atosorigin.tcc.testing.ejbses.profiling.ProfilerHome</home>
               <remote>com.atosorigin.tcc.testing.ejbses.profiling.Profiler</remote>
               <local-home>com.atosorigin.tcc.testing.ejbses.profiling.ProfilerLocalHome</local-home>
               <local>com.atosorigin.tcc.testing.ejbses.profiling.ProfilerLocal</local>
               <ejb-class>com.atosorigin.tcc.testing.ejbses.profiling.ProfilerBean</ejb-class>
               <session-type>Stateless</session-type>
               <transaction-type>Container</transaction-type>
               <ejb-local-ref>
                    <ejb-ref-name>EJBTesting/Solution</ejb-ref-name>
                    <ejb-ref-type>Entity</ejb-ref-type>
                    <local-home>com.atosorigin.tcc.testing.ejbcmp.profiling.SolutionLocalHome</local-home>
                    <local>com.atosorigin.tcc.testing.ejbcmp.profiling.SolutionLocal</local>
                    <ejb-link>SolutionBean</ejb-link>
               </ejb-local-ref>
               <ejb-local-ref>
                    <ejb-ref-name>EJBTesting/Consultant</ejb-ref-name>
                    <ejb-ref-type>Entity</ejb-ref-type>
                    <local-home>com.atosorigin.tcc.testing.ejbcmp.profiling.ConsultantLocalHome</local-home>
                    <local>com.atosorigin.tcc.testing.ejbcmp.profiling.ConsultantLocal</local>
                    <ejb-link>ConsultantBean</ejb-link>
               </ejb-local-ref>
          </session>
          <entity>
               <ejb-name>ConsultantBean</ejb-name>
               <home>com.atosorigin.tcc.testing.ejbcmp.profiling.ConsultantHome</home>
               <remote>com.atosorigin.tcc.testing.ejbcmp.profiling.Consultant</remote>
               <local-home>com.atosorigin.tcc.testing.ejbcmp.profiling.ConsultantLocalHome</local-home>
               <local>com.atosorigin.tcc.testing.ejbcmp.profiling.ConsultantLocal</local>
               <ejb-class>com.atosorigin.tcc.testing.ejbcmp.profiling.ConsultantBean</ejb-class>
               <persistence-type>Container</persistence-type>
               <prim-key-class>java.lang.String</prim-key-class>
               <reentrant>False</reentrant>
               <cmp-version>2.x</cmp-version>
               <abstract-schema-name>Consultant</abstract-schema-name>
               <cmp-field>
                    <field-name>firstname</field-name>
               </cmp-field>
               <cmp-field>
                    <field-name>lastname</field-name>
               </cmp-field>
               <cmp-field>
                    <field-name>country</field-name>
               </cmp-field>
               <cmp-field>
                    <field-name>id</field-name>
               </cmp-field>
               <primkey-field>id</primkey-field>
               <query>
                    <query-method>
                         <method-name>findBySolution</method-name>
                         <method-params>
                              <method-param>java.lang.String</method-param>
                         </method-params>
                    </query-method>
                    <ejb-ql>SELECT Object(c) FROM Consultant AS c,
                    IN(c.solutions) s WHERE s.id = ?1 </ejb-ql>
               </query>
          </entity>
          <entity>
               <ejb-name>SolutionBean</ejb-name>
               <home>com.atosorigin.tcc.testing.ejbcmp.profiling.SolutionHome</home>
               <remote>com.atosorigin.tcc.testing.ejbcmp.profiling.Solution</remote>
               <local-home>com.atosorigin.tcc.testing.ejbcmp.profiling.SolutionLocalHome</local-home>
               <local>com.atosorigin.tcc.testing.ejbcmp.profiling.SolutionLocal</local>
               <ejb-class>com.atosorigin.tcc.testing.ejbcmp.profiling.SolutionBean</ejb-class>
               <persistence-type>Container</persistence-type>
               <prim-key-class>java.lang.String</prim-key-class>
               <reentrant>False</reentrant>
               <cmp-version>2.x</cmp-version>
               <abstract-schema-name>Solution</abstract-schema-name>
               <cmp-field>
                    <field-name>description</field-name>
               </cmp-field>
               <cmp-field>
                    <field-name>name</field-name>
               </cmp-field>
               <cmp-field>
                    <field-name>parent</field-name>
               </cmp-field>
               <cmp-field>
                    <field-name>id</field-name>
               </cmp-field>
               <primkey-field>id</primkey-field>
               <query>
                    <query-method>
                         <method-name>findChildSolutions</method-name>
                         <method-params>
                              <method-param>java.lang.String</method-param>
                         </method-params>
                    </query-method>
                    <ejb-ql>SELECT Object(s) FROM Solution AS s WHERE
                    s.parent = ?1</ejb-ql>
               </query>
               <query>
                    <query-method>
                         <method-name>findTopLevelSolutions</method-name>
                         <method-params/>
                    </query-method>
                    <ejb-ql>Select Object(s) FROM Solution AS s WHERE
                    (s.parent = 'none')</ejb-ql>
               </query>
          </entity>
     </enterprise-beans>
     <relationships>
          <ejb-relation>
               <description>A consultant may have one or more areas of expertise</description>
               <ejb-relation-name>Consultant_Solutions</ejb-relation-name>
               <ejb-relationship-role>
                    <ejb-relationship-role-name>com.atosorigin.tcc.testing.ejbcmp.profiling.ConsultantBean</ejb-relationship-role-name>
                    <multiplicity>Many</multiplicity>
                    <relationship-role-source>
                         <ejb-name>ConsultantBean</ejb-name>
                    </relationship-role-source>
                    <cmr-field>
                         <cmr-field-name>solutions</cmr-field-name>
                         <cmr-field-type>java.util.Collection</cmr-field-type>
                    </cmr-field>
               </ejb-relationship-role>
               <ejb-relationship-role>
                    <ejb-relationship-role-name>com.atosorigin.tcc.testing.ejbcmp.profiling.SolutionBean</ejb-relationship-role-name>
                    <multiplicity>Many</multiplicity>
                    <relationship-role-source>
                         <ejb-name>SolutionBean</ejb-name>
                    </relationship-role-source>
               </ejb-relationship-role>
          </ejb-relation>
     </relationships>
     <assembly-descriptor>
          <container-transaction>
               <description>container-transaction</description>
               <method>
                    <ejb-name>SolutionBean</ejb-name>
                    <method-name>*</method-name>
               </method>
               <method>
                    <ejb-name>ProfilerBean</ejb-name>
                    <method-name>*</method-name>
               </method>
               <method>
                    <ejb-name>ConsultantBean</ejb-name>
                    <method-name>*</method-name>
               </method>
               <trans-attribute>Required</trans-attribute>
          </container-transaction>
     </assembly-descriptor>
</ejb-jar>
I created a stateless session bean as a business facade for the two entity beans. I then created a webservice to test the beans.
What works :
- create a consultant
- get a consultant
- create a solution
- get a solution
(basically everything that doesn't involve the relationship field.
However, what doesn't work is the method call assignSolution:
- assign solution : this is implemented as follows
Business Method.
     public void assignSolution(String consultantID, String solutionID)
          throws ProfilingException {
          // TODO : Implement
          ConsultantLocal cons = null;
          SolutionLocal sol = null;
          try {
               cons = consHome.findByPrimaryKey(consultantID);
               sol = solHome.findByPrimaryKey(solutionID);
               Collection solutions = cons.getSolutions();
               solutions.add(sol);
               //sol.getConsultants().add(cons);
          } catch (FinderException ex) {
               ex.printStackTrace();
               throw new ProfilingException("failed to retrieve data from DB", ex);
As you can see I am trying to use the CM Relationship in this methhod. Adding the solution to a consultant should be as simple as adding a solution object to the collection retrieved with the getSolutions accessor. The Container is expected to persist the information in my MAXDB database.
However this doesn't happen.
The ORM details as defined in the persistent.xml follows :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE persistent-ejb-map SYSTEM "persistent.dtd">
<persistent-ejb-map>
     <locking
          type="Table"/>
     <db-properties>
          <data-source-name>TCC_PORTAL_PROFILER</data-source-name>
          <database-vendor
               name="SAPDB"/>
     </db-properties>
     <entity-beans>
          <entity-bean>
               <ejb-name>ConsultantBean</ejb-name>
               <table-name>PFL_CONSULTANTS</table-name>
               <field-map
                    key-type="NoKey">
                    <field-name>firstname</field-name>
                    <column>
                         <column-name>FIRSTNAME</column-name>
                    </column>
               </field-map>
               <field-map
                    key-type="NoKey">
                    <field-name>lastname</field-name>
                    <column>
                         <column-name>LASTNAME</column-name>
                    </column>
               </field-map>
               <field-map
                    key-type="NoKey">
                    <field-name>country</field-name>
                    <column>
                         <column-name>COUNTRY</column-name>
                    </column>
               </field-map>
               <field-map
                    key-type="PrimaryKey">
                    <field-name>id</field-name>
                    <column>
                         <column-name>ID</column-name>
                    </column>
               </field-map>
               <finder-descriptor>
                    <method-name>findBySolution</method-name>
                    <method-params>
                         <method-param>java.lang.String</method-param>
                    </method-params>
                    <load-selected-objects
                         lock="read"/>
               </finder-descriptor>
          </entity-bean>
          <entity-bean>
               <ejb-name>SolutionBean</ejb-name>
               <table-name>PFL_SAPSOLUTIONS</table-name>
               <field-map
                    key-type="NoKey">
                    <field-name>description</field-name>
                    <column>
                         <column-name>DESCRIPTION</column-name>
                    </column>
               </field-map>
               <field-map
                    key-type="NoKey">
                    <field-name>name</field-name>
                    <column>
                         <column-name>NAME</column-name>
                    </column>
               </field-map>
               <field-map
                    key-type="NoKey">
                    <field-name>parent</field-name>
                    <column>
                         <column-name>PARENTID</column-name>
                    </column>
               </field-map>
               <field-map
                    key-type="PrimaryKey">
                    <field-name>id</field-name>
                    <column>
                         <column-name>ID</column-name>
                    </column>
               </field-map>
               <finder-descriptor>
                    <method-name>findChildSolutions</method-name>
                    <method-params>
                         <method-param>java.lang.String</method-param>
                    </method-params>
                    <load-selected-objects
                         lock="read"/>
               </finder-descriptor>
               <finder-descriptor>
                    <method-name>findTopLevelSolutions</method-name>
                    <method-params/>
                    <load-selected-objects
                         lock="read"/>
               </finder-descriptor>
          </entity-bean>
     </entity-beans>
     <relationships>
          <table-relation>
               <help-table>PFL_CONS_SOL_MAP</help-table>
               <table-relationship-role
                    key-type="PrimaryKey">
                    <ejb-name>ConsultantBean</ejb-name>
                    <cmr-field>solutions</cmr-field>
                    <fk-column>
                         <column-name>CONSULTANTID</column-name>
                         <pk-field-name>id</pk-field-name>
                    </fk-column>
               </table-relationship-role>
               <table-relationship-role
                    key-type="PrimaryKey">
                    <ejb-name>SolutionBean</ejb-name>
                    <fk-column>
                         <column-name>SOLUTIONID</column-name>
                         <pk-field-name>id</pk-field-name>
                    </fk-column>
               </table-relationship-role>
          </table-relation>
     </relationships>
</persistent-ejb-map>
The error in the default trace file when calling the method states, there is an "inconsistency in the number of primary keys". Details follow.
#1.5#000F1F188E5C004400000000000010480003E76C80EFD57A#1098880364327#com.sap.engine.services.ejb#com.atosorigin.tcc/EJBCMPProfilingTest#com.sap.engine.services.ejb#Guest#2####4d2b2370281411d9a40d000f1f188e5c#SAPEngine_Application_Thread[impl:3]_31##0#0#Error##Java###
[EXCEPTION]
#1#com.sap.engine.services.ejb.exceptions.BaseRemoteException: Exception in method assignSolution.
     at com.atosorigin.tcc.testing.ejbses.profiling.ProfilerObjectImpl0.assignSolution(ProfilerObjectImpl0.java:822)
     at com.atosorigin.tcc.testing.ejbses.profiling.Profiler_Stub.assignSolution(Profiler_Stub.java:533)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
     at $Proxy73.assignSolution(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:146)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:68)
     at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
     at SoapServlet.doPost(SoapServlet.java:51)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:339)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:317)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:810)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:238)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: com.sap.engine.services.applocking.exception.SAPAppLockingIllegalArgumentException: Inconsistency in number of primary keys
     at com.sap.engine.services.applocking.TableLockingImpl.getArgument(TableLockingImpl.java:385)
     at com.sap.engine.services.applocking.TableLockingImpl.lock(TableLockingImpl.java:128)
     at com.sap.engine.services.applocking.TableLockingImpl.lock(TableLockingImpl.java:138)
     at com.sap.engine.services.ejb.entity.pm.lock.TableLockingSystem.write(TableLockingSystem.java:82)
     at com.sap.engine.services.ejb.entity.pm.PersistentM2M.create(PersistentM2M.java:172)
     at com.sap.engine.services.ejb.entity.pm.PersistentCacheM2M.add(PersistentCacheM2M.java:197)
     at com.sap.engine.services.ejb.entity.pm.multiple.CollectionM2M.add(CollectionM2M.java:57)
     at com.atosorigin.tcc.testing.ejbses.profiling.ProfilerBean.assignSolution(ProfilerBean.java:201)
     at com.atosorigin.tcc.testing.ejbses.profiling.ProfilerObjectImpl0.assignSolution(ProfilerObjectImpl0.java:771)
     ... 32 more
I can't figure out what the problem is with the ORM mapping defined.
On the database level I have three tables. Consultant maps to PFL_CONSULTANT, Solution to PFL_SAPSOLUTIONS. The third table PFL_CONS_SOL_MAP is the help table used for the relationship (having two fields, which are in fact foreign keys from the other two tables to express the assignment of solutions to consultants (where a consultant can have one or more solutions).
ps. : I am running Netweaver Developer Workplace (Netweaver 2004, at stack level 5)
Message was edited by: Theo Paesen

Hm, after disabling 'automatic locking' it works.

In the account payment how many vendor output come in one time

Hi experts,
In Automatic payemnet suppose there is vendor from 1001 to 1010 and we run the program in f110 so what is the output that is come in one output or 10 output for the different evndors.
bye
Arti singh

Hi,
I will explain you clearly, see there will be two scenarios as Babu told:
SCenario 1: As said by u , if there 1000-1100 vendors and u post the payments, then for each vendor what ever open items are present, they will clubbed together and only one payment document will be generated for each vendor, means around 1000 payment document numbers will be generated as per the above example, if all the vendors have open items for payment.
Scenario 2: In each vendor say suppose there are 5 different invoices and u want to see those 5 invoices payments separately, then in the vendor master u have to select the individual payment option under Payment data, then for a single vendor based on the number of invoices, the payment documents will be generated.
hope u r clear
regards
srikanth.

Portal Form for a Many to Many relationship

I have 3 tables (well there are actually more but i'm glad when i can do the trick with 3 at the moment):
T_JOURNAL (JOURNAL_ID, JOURNAL_NAME)
T_CONTENTBROKER (CONTENTBROKER_ID, CONTENTBROKER_NAME)
HT_JOURNAL_CONTENTBROKER (JOURNAL_ID, CONTENTBROKER_ID)
The HT stants for 'help table'. T_JOURNAL and T_CONTENTBROKER have a many to many relationship. So one Journal can have many Broker and one Broker has many Journals.
When doing a Form in Oracle Portal for adding a new Journal, i'd like to have a LoV with the Brokers. But an new entry would at least require 3 tables to update (T_JOURNAL, T_CONTENTBROKER and the help table HT_JOURNAL_CONTENTBROKER). How can this be solved? i'm not very good with pl/sql... so if there is only a solution with pl/sql i would be glad for the code...
I also tried to create a view wich would show me the journal with all its broker but i kind of failed...
any suggestions appreciated ;)
- renato

Thanks for the info. I tried that and it still doesn't pull the value. I have opened a TAR via metalink, but I'm not getting any
satisfactory answers. I ran across an note - 137172.1 that has this snippet of information in it.
Unfortunately, at this time (portal 3.0.7.6.2) , a non-table item cannot be
referenced in a plsql event handler, only in client side JavaScript code. This
is a known limitation and will be fixed in a future release.
I don't know how to get the value from the client side JavaScript code to a pl/sql variable. Do you?
I've been trying to get them to tell me if the 'known issue' has been addressed in 3.0.9.
I'll keep at it. Thanks so much for your suggestion I appreciate it.
Deb

Comman separated output for a one-many relationship

Similar Messages

Maybe you are looking for