Command a ventilator with USB6251 and The Daq Signal Accessory
Hello,
I would like to make a school project using Labview and the USB6251 connected to the Daq Signal Accessory Board.
The Labview program must read continuously the temperature from the temperature sensor (AI channel 4, internally connected) from the Daq Signal Accessory Board. When the temperature reaches an established value, then a led on the front pannel must be turned on and an output singal from the Daq must start a ventilator connected to the Daq which cools down the sensor and then stops.
Would it be possible to do something like this? Even if I generate a square signal and the ventilator runs only on the high state of the signal. The ventilator requires at least 120 mV DC current. I am afraid that if I take such current from the Daq I might damage the device.
Thank you.
Solved!
Go to Solution.
I guess you mean 120 mA DC current . If you look at your daq board spec you will find that the max current are far bellow 120 mA. This is true for both analog out and digital out. Take a look at this site it may help out some. http://www.me.umn.edu/courses/me2011/robot/technotes/motorcontrol/motorcontrol.html cool site. If you want speed control you have two options PWM or regulating the motor voltage.
Good luck
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Similar Messages
-
Does anyone have a more detailed description on the functions of the DAQ Signal Accessory Demo Box?
I have just purchased the DAQ Signal Accessory and have read the manual but like more information on the various funtions of this box. Can anyone provide more detail information or schematics?
Joey,
That's going to be a question for the NI sales or support team.
Start by going to ni.com/ask. They may actually have something on the website. This is a very powerful site for getting support, finding software and drivers, as well as patches. If you start a support question, you will be given a bunch of links. Be sure to enter the model or name of the signal accessory as well as other pertinent information in the question, as this is the query to search all of NI's databases.
Unfortunately, I don't think you will get a schematic diagram for this. It is proprietary technology, and National Instruments is very protective of such information, as they should be.
If you have a specific question, perhaps someone here can help. -
Is it possible to use PCI-1200 on the DAQ Signal Accessory?
Is it possible to use PCI-1200 on the DAQ Signal Accessory? The documentation for the Daq signal accessory did not mention explicitly whether it
supports the PCI-1200 specifically or not?Hi,
Yes, you can. According to the manual, the DAQ Signal Accessory is compatible with Lab / 1200 series devices -- this includes the PCI-1200 card.
Regards,
RamziH. -
[SOLVED]Script to replace compiz with metacity and the other way round
Hi. I would like You guys to help me. I don't want to use fusion-icon (many complex reasons I wouldn't like to state here, just please take it for granted) and I'd like to bind a key combination for a command which would let me replace compiz with metacity and the other way round. So I think I need a script.
What I'd need:
detect if compiz is running
yes -> metacity --replace
no -> compiz --loose-binding --replace
Can You help?
Last edited by warnec (2010-06-23 19:38:46)The scripts by mojlac024 replaces compiz by metacity when compiz is running, but when metacity is running it doesn't bring compiz back.
How to incorporate that test:
dbus-send --print-reply --type=method_call --dest=org.freedesktop.compiz /org/freedesktop/compiz/dbus/screen0 org.freedesktop.compiz.list | wc -l
into the script?
PS.:
When compiz is running, it prints 1. But when compiz is not running, it prints:
Error org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.compiz was not provided by any .service files
0
So a simple logical test of "is this 0 or not?" won't work, I'm afraid.
Last edited by warnec (2010-06-23 17:01:44) -
will internet recovery work on my mid 2010 MBP with yosemite and the firmare internet recovery update designed for OS lion
Yes, it does. The point is can your computer use full Internet Recovery with the firmware update or not. If not then you have to begin with the Snow Leopard DVD that came with your computer and do an Erase and Install.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
However, if you can use full Internet Recovery:
Install Yosemite, Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. -
i factory unlock my iphone 3gs and was on ios 6.1.2 and updatednit to 6.1.3 with itunes and the phone got lock again at activation screen. i try downgrading to 4.1 with baseband 5.13.04 and want to upgrade back to 6.1.2. pls help me
Sorry, downgrading the iOS is not supported by Apple, thus there is no official way to do so. Your phone was re-locked to the carrier it was originally locked to because you hacked it to unlock it. Apple's servers detected such & re-locked your phone. You need to contact the carrier your phone is locked to if you want to get it officially unlocked.
-
How do i set up my apple id with itunes and the appstore?
How do i set up my apple id with itunes and the appstore?
iTunes 10 for Mac: Set up an Apple ID account for use in the iTunes Store
http://support.apple.com/kb/PH1726 -
I have added 2 new email accounts to my Imac. How do I get them to appear on my macbook pro and my iPhone. The computers are with maverick and the iPhone has the latest iOS 7.0.3. Thanks
Connect the device to the computer and iTunes and follow the instructions on this support document. http://support.apple.com/kb/HT1808
-
I downloaded the new software for mac book pro with retina and the office doesn't work
I downloaded the new software for mac book pro with retina and the office doesn't work
cynthia alia wrote:
I downloaded...
... but did you INSTALL it?
Office::2008 was drag & drop, but Office::2011 has an installer you need to run. -
i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?
Have you went to Settings>General Time&Date and correct the time. Make sure the time zone is correct too. Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.
-
I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.
Hi .
Apple no longer supports Safari for Windows if that's what you are asking > Apple apparently kills Windows PC support in Safari 6.0
Microsoft has not written IE for Safari for many years. -
Running my 3rd generation iPad on iOS 7.0.4, I saturated all the available iPad screen space (which would be the 15 home screens or desktop worth of space) with apps, and the apps that got bumped out of the last screen space mysteriously disappeared. Where are those missing quick lauch app icons now? The apps are still installed and can be searched/accessed through the finder, but they no longer have a user friendly access. How can I solve this problem?
Christopher Doryan wrote:
Hi Hexonxonx, thanks for trying to help, but next time please read the entire discussion, in oder to better comprehend what is being asked. The reason being is that your answer added nothing to what had already been mentioned.
Like I said, I was aware it was possible to access the apps through the finder, but the question revolved around how to recover the quick launch app icons for certain vanished apps.
Wow, kind of a snotty response to someone who was taking their own time to offer help. Whether you thought it was helpful or not, didn't deserve such an unkind retort. Maybe when you realize we all just users here trying to help others like you, who have issues and we don't get anything in return for the countless hours some people here spend offering that assistance, you'll maybe be a little less quick to be critical.
Just sayin.......
Oh and Meg offered the right answer. Put your Apps in Folders, which will create extra space for the apps which have disappeared. -
hello , im working with hebrew and the dot "." isnt correcting to right with the align , i know that in indesign u use with paragraph direction to correct it but here what should i do. sorry for my english
You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book.
Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can have it offered for sale @$0.99, in your app store?
FROM: Terry Weber, Email: [email protected]https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/bookSignup
Maybe you are looking for
-
I have a problem with dust on the monitor (iMac 27).
I have a problem with dust on the monitor (iMac 27). it appeared after half a year of use (in a clean room is not dusty). Replaced by a matrix of times under warranty. But after a while, again, there were shortcomings in the upper corners of the matr
-
How To display a table that resides in the database via JFrame.
Hi, I need to display the contents that present in the table that resides in my database. Scenario: Im having Main frame window, in that im having a button, while clicking that button a new JFrame should be opened & it should display all the rows & c
-
What's the fastest input stream reader?
Here's my candidate for the fastest stream reader. My interest and testing is with file input streams, but it's nice to support any stream. public static String readStream(InputStream is) throws IOException{ int i, length = 0;
-
No puedo editar títulos en iMovie 10 !!
Hola, Necesito ayuda con iMovie 10, me parece que hay un problema con la aplicación. Cuanto trato de editar un título no me permite cambiar el tipo de letra ni tamaño ni otras opciones. Solo puedo cambiar el texto (las palabras). Los botones me apare
-
How can I recover deleted photos from my camera roll?
How can I recover deleted photos from my camera roll and my photo stream? Please, help me!