Command exit value 1?

The following piece of code produces an exit value 1:
Process proc = rt.exec(cmd);
int exitVal = proc.waitFor();
System.out.println("ExitValue: " + exitVal);I know that an exit value 1 means it was unsuccessfull but does anyone know in better detail what that exit value means?
I assume the problem is caused because I am not waiting long enough for the previous process to run, does anyone know a java command which will cause the program to wait for 20 seconds?
Thanks.

... does anyone know a java command which willcause the program to wait for 20 seconds?
Thread.sleep(20000);see the API documentation.Thanks for that.
As for the errorlevels, my program is attemting to run java filename from dos, I have done this successfully elsewhere in the program but for this perticular one im getting the error.

Similar Messages

Getting an exit value from a program called thru a shell script

how do i get the correct exit value always from a program called thru a shell script
the getExitValue of the process works fine someitmes but not always ...
Ex: write a pgm which sleeps for 5 secs & returns with exit(100).try to invoke this thru a script & try to run this script from Runtime.getRuntime.exec(..)
...the exit value is not same as 100.(it works if the sleep is not given though !!)
can nebody help??

ive done that ...see the sample code for ex..
public void execute()
               try{
                         Process program=Runtime.getRuntime().exec(cmd);
                         printOutput(program.getInputStream());
                         try
                              program.waitFor();
                         catch(InterruptedException e)
                              System.out.println("Command Interrupted: " + e);
          System.out.println("Error status : "+program.exitValue());
                    catch(SecurityException e)
                         System.out.println("Error executing program "+e);
                    catch(IOException e)
                         System.out.println("Error executing program "+e);
....

Output when command exits with non-zero status

For obvious reasons, entering the following on the command line results in non-zero status error.:
"echo AWK might do it | sed 's/it*$//' | grep it?"
How do I get Terminal to tell me the command that generated this error

The Terminal is not responsible for error messages, it is your shell. The default Mac OS X shell is bash
From the bash man page (man bash):
The return status of a pipeline is the exit status of the last command,
unless the pipefail option is enabled. If pipefail is enabled, the
pipeline's return status is the value of the last (rightmost) command
to exit with a non-zero status, or zero if all commands exit success-
fully.
But I must warn you that if you enable pipefail all the time, you might break existing scripts that do not expect that behavior.
Looking at your echo|sed|grep command line, there are no errors, not even grep. A non-zero exit status is not necessarily an error, as it is all in the eye of the beholder. From the grep man page:
Normally, exit status is 0 if selected lines are found and 1 otherwise.
But the exit status is 2 if an error occurred, unless the -q or --quiet
or --silent option is used and a selected line is found.
So in the case of grep an exit status of 2 means there was an error. A value of 0 or 1 means there was no error, but rather the difference between finding what you were looking for vs not finding.

File adapter operating system command exit code

Hello,
If you call an operating system command in the file adapter, how is the exit code of the command handled? The documentation says nothing about this.
If I call 'true', I expect the file adapter to succeed.
If I call 'false', I expect the file adapter to fail.
Hope someone can calrify.
Best regards
/Otto Frost

Hi, Yes, you are rigth, it spawns a subprocess, that runs without control.
In java you use Runtime.exec().
It returns a process.
process.exitValue() returns an int.
The process is already used to terminate the process after timeout I suppose.
You would like to be able to have the fileadapter succeed or fail depending on this exitValue.
Depending on the command you execute, the exit code is different. RTFM on unix.
You would like to define which codes should be treated as success, and which ones that should be treated as failure.
true typically returns 0 and false not 0
However, a comparison command could for example return 0 for equal, -1 if the frist argument is smaller and 1 if the first argument is larger.
For the diff command, Exit status is 0 if inputs are the same, 1 if different, 2 if trouble.
Thanks
/Otto

Oracle9iR2/Solaris8 -- DRG-11207: user filter command exited with status 137

The ctx_ddl.sync_index() procedure hangs when I use it to synchronize the index. It is obvious that the INSO filter is not responding.The LD_LIBRARY_PATH and PATH variables are correctly pointing to $ORACLE_HOME/ctx/lib, $ORACLE_HOME/lib and $ORACLE_HOME/bin,$ORACLE_HOME/ctx/bin respectively. The error in CTX_USER_INDEX_ERRORS is the all too famous:'DRG-11207: user filter command exited with status 137'. The platform is 9iR2/Solaris 8.
Any ideas as to how to get INSO to start working with the various documents ON SOLARIS 8???
Thanks

The ctx_ddl.sync_index() procedure hangs when I use it to synchronize the index. It is obvious that the INSO filter is not responding.The LD_LIBRARY_PATH and PATH variables are correctly pointing to $ORACLE_HOME/ctx/lib, $ORACLE_HOME/lib and $ORACLE_HOME/bin,$ORACLE_HOME/ctx/bin respectively. The error in CTX_USER_INDEX_ERRORS is the all too famous:'DRG-11207: user filter command exited with status 137'. The platform is 9iR2/Solaris 8.
Any ideas as to how to get INSO to start working with the various documents ON SOLARIS 8???
Thanks

Captivate 7 cmi.exit value to "suspend"

How do I get Captivate to send the cmi.exit value as "suspend" instead of "normal" to the LMS? I have the "Set exit to normal after completion" option unchecked in the LMS Advanced Settings dialogue box but that does not seem to work. Basically after a user has taken the course I need them to be able to review the quiz via the LMS but I do not want them to be able to review the quiz using the review feature in Captivate and have turned off the "review quiz" button as it shows the correct answers.
Thanks

1. Create a button in Captivate and assign a javascript call to "MyExit()"
2. Create a .js file called CourseExit.js.
3. Place the following code into that file.
function MyExit()
var SD = window.parent;
if (blnReachedEnd == false && confirm("Would you like to save your progress to resume later?")){
SCORM2004_CallSetValue("cmi.exit", "suspend");
SCORM2004_CallSetValue("adl.nav.request", "suspendAll");
else{
SCORM2004_CallSetValue("cmi.exit", "");
SCORM2004_CallSetValue("adl.nav.request", "exitAll");
Unload(true);
4. Place the CourseExit.js into the "assets/js/" in the published folder
5. Add "<script language="JavaScript1.2" src="assets/js/CourseExit.js"></script>" to the html file that was output on the publish.
I was able to set this up on the set up files on the local hard disk but so all I had to do was create a button and add the "MyExit()" code to the button, but when the next update came out it reset the hard disk files. So, I have just resorted to updating the output file as seen above.
Hope this helps.
Garrett

Process exit value

Hi,
Does anyone know what exit value of 18 mean? I was calling Runtime.exec() to execute an external program and a call to a waitFor() method returned a value of 18. How do I find out what this means? I am running this under windows XP. The code normally works fine, in fact this was the first time that I saw it returning error code other than 0. This happened several times yesterday but running it today seems to be OK again... Any help will be greatly appreciated...

thats a windows question. and its better answered by
google.
http://www.google.com/search?hl=en&q=windows+%22exit+c
odes%22
http://www.hiteksoftware.com/knowledge/articles/049.ht
m
18 There are no more files.Um, yeah. What he said.
(Faster than I and a more useful answer. Bloody kids these days.)

Error MSB3073: The command exited with code -1

I am getting this error while deploying the biztalk project from visual studio using Deployment Framework for Biztalk (BTDF).
Please guide me what needs to be done. Here's the code :-
<?xml version="1.0" encoding="utf-8"?>

<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" DefaultTargets="Installer" ToolsVersion="4.0">
<PropertyGroup>
<Configuration Condition="'$(Configuration)' == ''">Debug</Configuration>
<Platform Condition="'$(Platform)' == ''">x86</Platform>
<SchemaVersion>1.0</SchemaVersion>
<ProjectName>HelloWorld</ProjectName>
<ProjectVersion>1.0</ProjectVersion>
<IncludeOrchestrations>False</IncludeOrchestrations>
<IncludeTransforms>False</IncludeTransforms>
<IncludeSSO>True</IncludeSSO>
<UsingMasterBindings>True</UsingMasterBindings>
<RequireXmlPreprocessDirectives>False</RequireXmlPreprocessDirectives>
<ApplyXmlEscape>True</ApplyXmlEscape>
<SkipIISReset>True</SkipIISReset>
</PropertyGroup>
<PropertyGroup>






<ProductVersion>1.0.0</ProductVersion>
<ProductId>084986b1-d675-4383-b0ed-da2e3f4e3998</ProductId>

<ProductName>HelloWorld for BizTalk</ProductName>
<Manufacturer>Deployment Framework User</Manufacturer>
<PackageDescription>HelloWorld</PackageDescription>
<PackageComments>HelloWorld</PackageComments>

<ProductUpgradeCode>4975288c-1b94-4d42-868b-f166cdc02224</ProductUpgradeCode>
</PropertyGroup>



<PropertyGroup Condition="'$(Configuration)' == 'Debug'">
<DeploymentFrameworkTargetsPath>$(MSBuildExtensionsPath)\DeploymentFrameworkForBizTalk\5.0\</DeploymentFrameworkTargetsPath>
<OutputPath Condition="'$(TeamBuildOutDir)' == ''">bin\Debug\</OutputPath>
<OutputPath Condition="'$(TeamBuildOutDir)' != ''">$(TeamBuildOutDir)</OutputPath>
<DeployPDBsToGac>false</DeployPDBsToGac>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)' == 'Release'">
<DeploymentFrameworkTargetsPath>$(MSBuildExtensionsPath)\DeploymentFrameworkForBizTalk\5.0\</DeploymentFrameworkTargetsPath>
<OutputPath Condition="'$(TeamBuildOutDir)' == ''">bin\Release\</OutputPath>
<OutputPath Condition="'$(TeamBuildOutDir)' != ''">$(TeamBuildOutDir)</OutputPath>
<DeployPDBsToGac>false</DeployPDBsToGac>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)' == 'Server'">
<DeploymentFrameworkTargetsPath>Framework\</DeploymentFrameworkTargetsPath>

<DeployPDBsToGac>true</DeployPDBsToGac>
</PropertyGroup>
<ItemGroup>
<PropsFromEnvSettings Include="SsoAppUserGroup;SsoAppAdminGroup" />
</ItemGroup>



<ItemGroup>
<Schemas Include="HelloWorld.dll">
<LocationPath>..\$(ProjectName)\bin\$(Configuration)</LocationPath>
</Schemas>
</ItemGroup>

<Import Project="$(DeploymentFrameworkTargetsPath)BizTalkDeploymentFramework.targets" />

<Target Name="CustomRedist">
</Target>
</Project>
Error :-
Starting build...
C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" /nologo /t:Deploy /p:Configuration=Debug
Build started 08-04-2015 17:43:51.
Project "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" on node 1 (Deploy target(s)).
SetModeDeploy:
DEPLOYING APPLICATION TO BIZTALK...
SetWinVer:
Running on Windows V62
Detected IIS 7
Detected 64-bit OS
GetSoftwarePaths:
Using .NET Framework Install Path 'C:\Windows\Microsoft.NET\Framework\v4.0.30319'.
Using BizTalk Install Path 'C:\Program Files (x86)\Microsoft BizTalk Server 2013\'.
Using Deployment Framework Install Path 'C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\'.
Using Deployment Framework Tools Path 'C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools'.
Using BizTalk ESB Toolkit Install Path 'C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\'.
ExportSettings:
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\EnvironmentSettingsExporter.exe" "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\SettingsFileGenerator.xml" "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings"
Environment Settings Spreadsheet to XML Exporter 1.6.1
[http://EnvSettingsManager.codeplex.com]
Copyright (C) 2007-11 Thomas F. Abraham. All Rights Reserved.
Importing from SettingsFileGenerator.xml...
Output format is XmlPreprocess (multi-file).
Exporting to Exported_LocalSettings.xml...
Exporting to Exported_DevSettings.xml...
Exporting to Exported_TestSettings.xml...
Exporting to Exported_ProdSettings.xml...
Finished.
InitSettingsFilePath:
Using settings file C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml
SetPropertiesFromEnvironmentSettings:
Setting properties from environment settings file (C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml)
Setting property to value 'BizTalk Application Users'.
Setting property to value 'BizTalk Server Administrators'.
InitializeAppName:
BizTalk Application Name is HelloWorld
PreprocessBindings:
Checking syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml'...
Syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml' appears to be valid.
Clearing file attributes for 'PortBindings.xml'.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\xmlpreprocess.exe" /v /c /noDirectives /i:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml" /o:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /d:CurDir="C:\BTDF\Walkthrough1" /s:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml"
XmlPreprocess v2.0.18.0
Copyright (c) 2004-2013 Loren M Halvorson
XML File Preprocessor
Settings XML file: "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml"
Preprocessing "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml" to "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml"...
PortBindings.xml : Set the value 'HelloWorld' of 2 node(s) matching XPath '//ApplicationName'.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\ElementTunnel.exe" /i:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /o:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /x:"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\adapterXPaths.txt" /encode+
Nested XML Encoder/Decoder v5.5.100.0
Copyright (C) 2005-2014 Scott Colestock, Tim Rayburn, Thomas F. Abraham
XML encodes/decodes content of element(s) by XPath. Applies escaping rules such
as > for '<'. Namespace decls, PIs, etc. of nested XML are not preserved.
XPaths : 16
Transformed Nodes : 0
Empty Nodes (skipped) : 3
No Transform Req'd (skipped) : 3
Total Matched Nodes : 6
Complete - output file has been saved.
Checking syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml'...
Syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml' appears to be valid.
DeployFileAdapterPhysicalPaths:
Configuring FILE adapter physical paths from binding file PortBindings.xml...
Processing FILE adapter physical paths (Send)...
Setting up path 'C:\BTDF\Walkthrough1\Out'...
Directory already exists.
Granted 'BUILTIN\Users' Full Access permissions.
Processing FILE adapter physical paths (Receive)...
Setting up path 'C:\BTDF\Walkthrough1\In'...
Directory already exists.
Granted 'BUILTIN\Users' Full Access permissions.
TerminateServiceInstancesConditional:
Attempting to terminate all service instances for BizTalk app 'HelloWorld'...
Terminated 0 service instances for BizTalk app 'HelloWorld'.
VerifyBizTalkAppExists:
Checking for existence of BizTalk application 'HelloWorld'...
Did not find BizTalk application 'HelloWorld'.
DeployAppDefinition:
BTSTask.exe AddApp -ApplicationName:"HelloWorld" -Description:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding new BizTalk application "HelloWorld" to configuration database (server="BDDBESBWMV01", database="BizTalkMgmtDb")...
Information: Added application "HelloWorld".
Command succeeded with 0 errors, 0 warnings.
UndeploySchemas:
Adding assembly name 'HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f' to item group.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\gacutil.exe" /u "HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f"
Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.1
Copyright (c) Microsoft Corporation. All rights reserved.
Number of assemblies uninstalled = 0
Number of failures = 0
DeploySchemas:
BTSTask.exe AddResource -Type:BizTalkAssembly -Source:"..\HelloWorld\bin\Debug\HelloWorld.dll" -ApplicationName:"HelloWorld" -Options:GacOnAdd,GacOnImport,GacOnInstall
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f") to application "HelloWorld"...
Serialized BizTalk assembly "HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f" from "..\HelloWorld\bin\Debug\HelloWorld.dll".
Information: Validating resources (count=1)...
* Validating resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f")...
Information: Performing change requests...
Information: Calling BeginTypeChangeRequest for all selected resource types...
PerformingBeginChangeRequest
Adding resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f") to store.
Information: * Performing change request on type "System.BizTalk:BizTalkAssembly" (count=1)...
Information: Deploy server="BDDBESBWMV01" database="BizTalkMgmtDb" assembly="C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll"
Information: Installed the "C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll" assembly into the Global Assembly Cache. (force=True)
Information: Deploy operation succeeded.
Information: Deploy server="BDDBESBWMV01" database="BizTalkMgmtDb" assembly="C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll"
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.POSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.InvoiceSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved map "Microsoft.Samples.BizTalk.HelloWorld.POToInvoice".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.POMessageType".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.InvoiceMessageType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.ReceivePOPortType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.SendInvoicePortType".
Saved orchestration "Microsoft.Samples.BizTalk.HelloWorld.HelloSchedule".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.POSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.InvoiceSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved map "Microsoft.Samples.BizTalk.HelloWorld.POToInvoice".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.POMessageType".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.InvoiceMessageType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.ReceivePOPortType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.SendInvoicePortType".
Saved orchestration "Microsoft.Samples.BizTalk.HelloWorld.HelloSchedule".
Information: Installed the "C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll" assembly into the Global Assembly Cache. (force=True)
Information: Deploy operation succeeded.
Information: Deployed the following 1 BizTalk assemblies:
HelloWorld.dll
EXEC : warning : If any of the assemblies were previously loaded by a Host Instance, it may be necessary to restart the Host Instance for changes to take effect. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
Information: Commit the change requests...
* Performing EndTypeChangeRequest for resource type "System.BizTalk:BizTalkAssembly".
Command succeeded with 0 errors, 0 warnings.
DeploySharedAssemblies:
Deploying additional assemblies to GAC...
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\gacutil.exe" /f /i "C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileReader.dll"
Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.1
Copyright (c) Microsoft Corporation. All rights reserved.
Assembly successfully added to the cache
Finished deploying additional assemblies to GAC.
ImportBindings:
Copying file from "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" to "C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml".
BTSTask.exe AddResource -Type:BizTalkBinding -Overwrite -Source:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml" -ApplicationName:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml") to application "HelloWorld"...
Information: Validating resources (count=1)...
* Validating resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml")...
Information: Performing change requests...
Information: Calling BeginTypeChangeRequest for all selected resource types...
PerformingBeginChangeRequest
Updating resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml") in store.
Information: * Performing change request on type "System.BizTalk:BizTalkBinding" (count=1)...
Information: Commit the change requests...
* Performing EndTypeChangeRequest for resource type "System.BizTalk:BizTalkBinding".
Command succeeded with 0 errors, 0 warnings.
Deleting file "C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml".
BTSTask.exe ImportBindings -Source:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" -ApplicationName:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Importing bindings "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" into application "HelloWorld" in BizTalk configuration database (server="BDDBESBWMV01", database="BizTalkMgmtDb")...
Information: Imported application "HelloWorld" bindings.
Command succeeded with 0 errors, 0 warnings.
DeploySSO:
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"
Error persisting to SSO:
System.Runtime.InteropServices.COMException (0xC0002A18): The format of the account name is not valid. Domain accounts must include the domain name. Local accounts must not include a domain or computer name.
at Microsoft.BizTalk.SSOClient.Interop.ISSOAdmin.CreateApplication(String applicationName, String description, String contactInfo, String userGroupName, String adminGroupName, Int32 flags, Int32 numFields)
at SSOSettingsFileManager.SSOHelper.CreateApp(String appName, String userGroup, String adminGroup)
at SSOSettingsFileManager.SettingsFileImport.SaveSettingsToSSO(String affiliateAppName, String inSettings, String userGroupName, String adminGroupName)
at SSOSettingsFileManager.SettingsFileImport.Main(String[] args)
C:\Program Files (x86)\MSBuild\DeploymentFrameworkForBizTalk\5.0\BizTalkDeploymentFramework.targets(1701,5): error MSB3073: The command ""C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"" exited with code -1. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
Done Building Project "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target(s)) -- FAILED.
Build FAILED.
"C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target) (1) ->
(DeploySchemas target) ->
EXEC : warning : If any of the assemblies were previously loaded by a Host Instance, it may be necessary to restart the Host Instance for changes to take effect. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
"C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target) (1) ->
(DeploySSO target) ->
C:\Program Files (x86)\MSBuild\DeploymentFrameworkForBizTalk\5.0\BizTalkDeploymentFramework.targets(1701,5): error MSB3073: The command ""C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"" exited with code -1. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
1 Warning(s)
1 Error(s)
Time Elapsed 00:00:54.94

Hi Pratibha,
Thank you for posting in MSND forum.
Since
this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
Based
on your issue, since it is related to the Deployment Framework for Biztalk (BTDF), so I suggest you could consult this issue directly to this Deployment Framework for Biztalk (BTDF) website:
https://biztalkdeployment.codeplex.com/discussions , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Catching System.Exit(value) in a unix script

I am migrating a java application from Windows to Unix, where on the Unix environment it will be run under a batch scheduler.
I am trying to figure out how to get Unix script 'visibility' to the contents of system.exit().
At program completion, system.exit is called with either a 0 (all's cool) or -1 (this dog won't hunt).
I cannot figure out how to get that value communicated back to the invoking script, which currently looks something like:
cp=<classpath>
rm -f /staging/*
$JAVA_HOME/bin/java ........
rc=$?
<if 'rc' = 0>
{ :perform this }
<if 'rc' = -1>
{ :perform this instead }
Any suggestions?

rc=$? suggests it's Bourne shell you're running the script with?
if [ $rc .eq. 0 ]; then
echo "Bingo!"
else
echo "Oh shit..."
fi
Better yet, do "man sh" from a unix command prompt -- it gives you the full scoop.

Over-writting Customer Exit Value

Hi,
I've a "customer exit" variable 'Z1', which is allowed "ready for input" as well. Z1 is based on 0FISCPER and I set the variable to current date using customer exit in I_STEP = 1.
Based on the value contained in Z1, I calculate date ranges for two other customer exit variables 'Z2' and 'Z3' in I_STEP = 2, to make default criteria for report. And reports shows values of Z1, Z2, and Z3 in each column respectively.
As Z1 is "ready for input", it allows user to enter value and change shows in Z1 column but Z2 and Z3 still being calculated on initial value of Z1.
Please let me know how it is possible to over-write the initial value? Process flow would be: if user enters any value in Z1 it should ignore the initial values set by customer exit.
Your urgent help would be highly appreciated.
Regards,
Shabbar

Ali,
You are on the right path. Calculate the default value of z1 in i_step = 1, and then calculate z2 and z3 in i_step =2. If the user enters the value , then z1 will have the user value.
-Saket

System.exit(VALUE) and Windows 98?

Has anyone got System.exit(integer) to return a value other than 0 under Windows 98?
Regardless of what integer I enter as an exit code, java.exe always seems to return 0. This does not seem to be the case under Windows NT, where the correct exit code is passed back.
Is anyone aware of this problem/found a workaround?

I found the same behaviour of Java between NT 4.0 SP 4 and Windows 98.
Are you sure you get the exit code right in the dos box?
%ERRORLEVEL% is NT specific, I think.
In normal DOS you can only ask e.g.:
if ERRORLEVEL 3 goto three
and this will jump to label
:three
if the exit code is >= 3 !!!
Test your program by this bat file:
java ...
if %errorlevel 6 goto x6
if %errorlevel 5 goto x5
if %errorlevel 4 goto x4
if %errorlevel 3 goto x3
if %errorlevel 2 goto x2
if %errorlevel 1 goto x1
goto x0
:x0
echo was: 0
goto end
:x1
echo was: 1
goto end
:x2
echo was: 2
goto end
:x3
echo was: 3
goto end
:x4
echo was: 4
goto end
:x5
echo was: 5
goto end
:x6
echo was: 6
goto end
:end
echo End.
You see:
7 or higher goes also to :x6

"clear screen" command exits sqlplus

Hi,
I am running a 10gR2 database. when I issue "clear screen" command at the sqlplus prompt, it throws me out of the sqlplus. there are no error messages.
anybody having the resolution ?
thanks.

I got it ... its a bug in 10.2.0.1, the version which I m using
bug 4595395 CLEAR SCREEN causes SQLPLUS command line to dump
this is resolved in 10.2.0.2 patchset. Note: 358749.1
thanks.

Installation Error: Exit Value 204

Hi,
I am getting this error while going for the basic installation of webcenter. It appears during the framework installation.
Error
--> Process (index=1,uid=1900284854,pid=3380)
failed to start a managed process after the maximum retry limit
Log:
E:\product\10.1.3.2.0\OracleAS_1\opmn\logs\\default_group~OC4J_WebCenter~default_group~1.log
ExitValue: 204

Hi,
Can you give us some more information, like the contents of the mentioned logfile? This may give more insights.
Jeroen van Veldhuizen

Error while deploying : DCM command did not complete successfully (-8)

Hi Friends:
I am getting error while deploying the application on Oracle Portal AS. Following are the version details:
Portal 10.1.4 ; Portal AS 10.1.2.0.2 ; JDK 1.5.x ; Jdeveloper 10.1.3.3.0
I am able to deploy same on my Standalone OC4J Server.
Portal Server connection is Successful. Application i am trying to deploy is simple JSF application.
The deployment log is as follow:
---- Deployment started. ---- Aug 21, 2008 10:10:26 AM
Target platform is Oracle Application Server 10g 10.1.2 (Windows) (PortalASConnection1).
Wrote WAR file to C:\Jdeveloper\jdev\mywork\MyApplication\ViewController\deploy\myApp1.war
Wrote EAR file to C:\Jdeveloper\jdev\mywork\MyApplication\ViewController\deploy\myApp1.ear
Invoking DCM servlet client...
C:\Jdeveloper\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Jdeveloper\jdev\lib\oc4j_remote_deploy.jar http://01HW180457:18102/Oc4jDcmServletAPI/ ias_admin **** redeploy D:\OraHome_3 C:\Jdeveloper\jdev\mywork\MyApplication\ViewController\deploy\myApp1.ear myApp1
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy D:\OraHome_3 C:\Jdeveloper\jdev\mywork\MyApplication\ViewController\deploy\myApp1.ear myApp1 UNDEFINED
Command = REDEPLOY
Reading application's ear file
Ear file was successfully read
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = ac11c08f46b696f8630ce3484fda975697914ab9c18a
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=ac11c08f46b696f8630ce3484fda975697914ab9c18a
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
**** No output was received from command
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (-8)
#### HTTP return code was -8
Exit status of DCM servlet client: -8
Elapsed time for deployment: 14 seconds
#### Deployment incomplete. #### Aug 21, 2008 10:10:39 AM
I will appriciate to hear from you.
Have A Nice Time!
Regards,
Kevin

Refer Note:373056.1 on MetaLink.
Thanks
Shail

URGENT -1 from DCM Command on OBE deploy === can not deploy/

Attempting to complete the OBE "Deploying J2EE and ADF Applications
http://www.oracle.com/technology/obe/obe9051jdev/deployToAppServer/lesson_Deployment.htm
in order to prove to upper management that it is "easy" to develop on JDEV 9.0.5 build 1618 and deploy to Oc4j 9.0.4
Compiles clean
Runs like a champ on the embedded oc4j
When i try to deploy the J2EE Application to oracle 9.0.4 getting a -1 from Oc4jDcmServlet <#### Deployment incomplete. #### >
< see attached >
when i look at the 9.0.4 Instance's XML log i get:
java.lang.Exception: can not deploy/undeploy to a disabled component: home
<see attached >
i have checked the home component. there is no way to enable / disable it just have start and stop and it is in the start state.
please help.
JDEV log
Invoking DCM servlet client...
C:\Java\j2sdk1.4.2_06\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Jdeveloper\jdev\lib\oc4j_remote_deploy.jar http://jstoll-xp-lt:1810/Oc4jDcmServletAPI/ ias_admin **** redeploy C:\Ora10G.9.0.4\InfraEngine C:\Jdeveloper\jdev\mywork\deploySamples\deployment_j2ee\View\deploy\application1.ear hr
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy C:\Ora10G.9.0.4\InfraEngine C:\Jdeveloper\jdev\mywork\deploySamples\deployment_j2ee\View\deploy\application1.ear hr UNDEFINED
Command = REDEPLOY
Reading application's ear file
Ear file was successfully read
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = 0a0a0a0a712594fbb82a5544f92a4d1a95f5dc99c4e
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=0a0a0a0a712594fbb82a5544f92a4d1a95f5dc99c4e
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=0a0a0a0a712594fbb82a5544f92a4d1a95f5dc99c4e
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=0a0a0a0a712594fbb82a5544f92a4d1a95f5dc99c4e
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=0a0a0a0a712594fbb82a5544f92a4d1a95f5dc99c4e
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
**** No output was received from command
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (-1)
#### HTTP return code was -1
Exit status of DCM servlet client: -1
Elapsed time for deployment: 48 seconds
#### Deployment incomplete. #### Oct 31, 2005 3:15:43 PM
log.xml
Log Entry: October 31, 2005 3:15:38 PM EST
Component DCM
Message Type Error
Module ID oracle/defaultLogger/ExceptionLogger
User ID SYSTEM
Host Name jstoll-xp-lt
Host Network Address 10.10.10.10
Process/Thread ID null-Thread[Deamon Worker for TaskMaster of iAS instance at: C:\Ora10G.9.0.4\InfraEngine JVM Id = 763f5d.107482d4e1c.-8000,5,main]
Message Level 1
Execution Context ID 10.10.10.10:57042:1130789725003:0
Message Text
Remote Execute failed:
Supplemental Text
java.lang.Exception: can not deploy/undeploy to a disabled component: home
at oracle.ias.sysmgmt.task.TaskMaster.internal_evaluate(Unknown Source)
at oracle.ias.sysmgmt.task.RemoteEvaluate.execCommand(Unknown Source)
at oracle.ias.sysmgmt.task.DaemonWorker.run(Unknown Source)

DCM command did not complete successfully (-1)
DCM command did not complete successfully (-1)

Command exit value 1?

Similar Messages

Maybe you are looking for