Command for listing all vm's within a vApp ?

This is seemingly simple, however I have yet to find success with this. How do I list all of the vm's in within a vApp along with all of the information about these vm's, namely thier IP, Ram, Compute, etc

It depends how is your networking on the vApp setup...If you are natting, using directly org networks etc...Please post a screenshot or you networking of the vapp and the networking of a vm:
Also please run the following and post the results:
$civapp = get-civapp 'TLPro | EALPro `[copy`]'
$civapp.ExtensionData.GetNetworkConfigSection()
$civapp.ExtensionData.GetNetworkConnectionSection()
You could try the following but it will only work if you using NatRouted networks;
$vm = get-civapp $civapp | get-civm | select -First 1
$vm.ExtensionData.GetNetworkConnectionSection().NetworkConnection[0].ExternalIpAddress

Similar Messages

  • Are there any command can list all container and XML doc which in DB

    When I use BDB XML shell,
    are there any command can list all container or xml document which in database,
    maybe like command dir(in windows), can list all exist directory and file.
    Thank very much.
    Henry Wang

    Hi Henry,
    When I use BDB XML shell,
    are there any command can list all container or xml
    document which in database,
    maybe like command dir(in windows), can list all
    exist directory and file.If you type "help" in the dbxml shell you'll get a list of all the commands available. As you will observe, you can use the "getDocuments" command to retrieve all the documents within a container. You will have to open the container first.
    If you want to list all the files within a directory you'll need to simply use the command prompt's "dir" (naming all your containers within a directory in the <container_name.dbxml> would allow you get the list by running a "dir *.dbxml" command).
    Not sure that this is what you really want, but if you would like to keep track of all the containers within a directory, or other directories, you can use a container with a special role, that of a catalogue, to hold the list of all created containers on disk, and eventually other specific information.
    Regards,
    Andrei

  • How to write the CMD command for restarting all obi services?

    Hi Experts,
    BIEE:11.1.1.6
    How to write the CMD command for restarting all obi services automatically by windows task scheduler?
    I am try to write the code as below, but it does not work. Please help me to review it and check what I am missing.Thanks.
    Or is there any better method for solving my requirement ? Please share me.Thanks very much.
    cd C:\InstallPath\OBIEE\instances\instance1\bin
    opmnctl stopall
    opmnctl startall
    I am facing the problem that it does not excute the 'opmnctl startall' code, which will be stopped after 'opmnctl stopall',
    So how to modify the command ?Thanks

    See if any of the these are useful or solves your query -
    4.5.2 Using a Windows Service to Start and Stop System Components
    http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/components.htm#BABEEAAI
    4.5.3 Using the Oracle BI Systems Management API to Programmatically Start and Stop Oracle Business Intelligence
    http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/components.htm#BABFGICA
    Edited by: Abhi on May 8, 2013 4:44 AM

  • Cannot list all the servers within cluster (on Resin)

    We have 10 Resin servers in the cluster, but when I try to list them I got only 9 of them listed.
    It doesn't list the local server (the one from which the servlet is actually invoked).
    Do you have any other idea how to list all the servers?
    Here is the code I use:
    for (int i = 0; i < clusterList.length; i++) {
         ClusterMXBean cluster = (ClusterMXBean) Jmx.findGlobal(clusterList.getObjectName());
         // --- retrieve all servers within one cluster
         ServerConnectorMXBean[] srunNames = cluster.getServers();
         for (int j = 0; j < srunNames.length; j++) {
              ServerConnectorMXBean server = (ServerConnectorMXBean) Jmx
                        .findGlobal(srunNames[j].getObjectName());
              String host = server.getAddress();
              int port = server.getPort();
              String state = server.getState();
    And here is the MX configuration:
    resin:type=SessionManager,Host=default,WebApp=/
    resin:type=ServerConnector,name=i
    resin:type=ServerConnector,name=h
    resin:type=ServerConnector,name=b
    resin:type=Resin
    resin:type=ServerConnector,name=j
    resin:type=ProxyCache
    resin:type=Host,name=default
    resin:type=ServerConnector,name=c
    resin:type=ServerConnector,name=e
    resin:type=Port,name=192.68.1.50-6802
    resin:type=ServerConnector,name=g
    resin:type=ServerConnector,name=a
    resin:type=ThreadPool
    resin:type=WebApp,Host=default,name=/
    resin:type=WebApp,Host=default,name=/mya
    resin:type=ConnectionPool,Host=default,WebApp=/mya,name=jdbc/mya
    resin:type=ServerConnector,name=f
    resin:type=Cluster,name=cluster1
    resin:type=ServerConnector,name=d
    resin:type=SessionManager,Host=default,WebApp=/mya
    resin:type=Server                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    kus wrote:
    There is a solution but not a very portable one, i.e. you can't use it to get a listing of files from any server that you happen to look at. But here are the steps you need to take:
    1. Use a browser (firefox, opera, etc.) to view the file listing and then view the source.
    2. Duplicate the retrieval of data from the given URL in Java (new URL(...), etc.)
    3. Parse the HTTP response and/or the HTML that the server returns to you to extract what you need.
    Step #3 is the biggest piece of work and the format you need to parse will depend on whatever the remote server hands to you. It's intended for humans, not machines; every server can decide how to format this and it even depends on the server's configuration how this data is presented to you. In any case, it's entirely up to you to make sense of whatever the server happens to throw back at you and if the server happens to present you a nice, picturesque page rather than a listing of files then your completely out of luck.He actually wasn't talking about http at all, so most of this thread has been a wild goose chase.

  • Would like to create a script for list all elements and structure of an indesign document

    Hello everybody,
    I'm a very beginner in indesign scripting.
    I would like to create a script in order to list all elements and the inner structure of a n indesign document.
    The aim for me is to understand how elements are sorted and arranged into indesign, and be able to find an specific element by its item name.
    The output document could be an xml or txt document with a treeview structure.
    I would like have a rough idea of which kind of javascript code I should use for that.
    Thanks for answers.

    Hi Ossydoc,
    You can use Muse to create such a website. All you need to do is, create links in Muse for the sermons and select  " link to File " in the hyperlink option and link to those Mp3 files.
    Please refer to this screenshot :- http://prntscr.com/4xvdup
    Now, when you publish your site,  Muse would automatically upload those files onto the server and the users would then be able to listen as well as download those sermons using the links on your site.
    Hope this helps
    Regards,
    Rohit Nair 

  • Key Command for Selecting All in Stack?

    - Hi, I'm wondering if there is a key command that I missed that allows you to select all items in a stack when it is collapsed?
    I'm mostly using Bridge for the Stacks feature. I actually prefer to use cataloging programs for DAM. But shooting HDR, stacks are a must!
    But when I want to do things with the images in a stack, such as deleting them all, opening in Photoshop (individually or to merge), etc., it only selects the top image by default.
    I must be missing something. It's a drag to have to open/close all the time.
    And a separate but related issue:
    - Does anyone know why all stacks are removed when you do a Batch Rename on a set of photos?
    I let Photoshop churn for 30min. + on the 'combine HDR/Panorama into stacks' command. Got all my HDR sets grouped nicely as stacks. Then decided to batch rename them and presto - no more stacks! Had to do it all over again!!!

    Hi Kenny,
    To apply a command to all photos in a collapsed stack, you must select them all by clicking the stack border, not the top image. See
    Stack files in Bridge Community Help.
    I'm not sure about the batch rename issue that you describe. Maybe someone else can chime in on that.

  • Command to list all email aliases /groups and members on the mail server.

    Hi,
    We are using SJS MEssaging server 6.2 .
    Which is the command to use to list all email aliases/groups and members on the mail server.
    Thanks,

    sureshsamuel wrote:
    We are using SJS MEssaging server 6.2 .
    Which is the command to use to list all email aliases/groups and members on the mail server.Email aliases/groups can exist in text files in the configuration directory of Messaging Server or be defined in the LDAP Directory Server. You can use the "commadmin group search" command to list the ldap groups (if you have Delegated Administration installed/configured), otherwise you can use a directory ldapsearch to find the groups.
    Regards,
    Shane.

  • What are the terminal commands to list all plugins, extensions, etc?

    I remember a while ago reading a thread on diagnosing kernel panics and such, where someone listed a number of commands (I think there were four separate terminal commands) which produced lists of plugins, daemons, background enhancers, extensions etc which could sap resources or drive up temperature without necessarily showing up in activity monitor or anything like that.
    Anyone know what these commands are? I'm having some serious overheating problems at the moment when doing nothing but for instance watching a youtube video with no other processes running so I'd like to get these dumps and see if there's anything installed which could be causing trouble.

    Check this out : http://helpx.adobe.com/story/help/keyboard-shortcuts.html

  • Weblogic.Admin command for stopping all Managed Servers in cluster

    Hello All,
    I am using Weblogic 9.2 MP3 on Linux env. I have a domain which has 16 Managed servers which are part of a cluster, I have eight Managed Servers running on one physical machine and other eight running on another physical Machine.
    I know we can do all stop and all start of Managed servers from console if we have node manager setup. We do not want to have node manager setup in our env.
    I am looking for a way to do that using java weblogic.Admin utility
    Please let me know on how we can achieve this using weblogic.Admin utility by passing clustername argument.
    Thanks
    Weblogic Consultant

    hi sir,
    I think in weblogic 9.2 weblogic.Admin utility is deprecated but it works in 9.2. We have better option than weblogic.Admin utility nothing but WLST. If u want to start using weblogic.Admin we have command
    java weblogic.Admin -url adminhost:listenport -username xxxx -password xxxx START managedservername
    java weblogic.Admin -url adminhost:listenport -username xxxx -password xxxx SHUTDOWN managedservername
    java weblogic.Admin -url adminhost:listenport -username xxxx -password xxxx START clustername
    java weblogic.Admin -url adminhost:listenport -username xxxx -password xxxx SHUTDOWN clustername
    If u want to use WLST for starting managed servers and clusters
    check the follwing steps.
    1. java weblogic.WLST
    2. startNodeManager()
    3. TAKE ANOTHER COMMAND PROMPT START ADMIN SERVER
    4. TAKE ANOTHER COMMAND PROMPT
    java weblogic.WLST
    5. start('man1','Server') or start('man1','Server','localhost:7003')
    6. start('mycluster','Cluster')
    7.shutdown('man1','Server') or start('man1','Server','localhost:7003')
    8.shutdown('mycluster','Cluster')
    regards
    abhi
    Edited by: sumanth_abhi on Feb 5, 2009 8:54 PM

  • Command for move all clips at right of deletion into the deletion gap ?

    Hi,
    Having used razor tool to cut out a portion of a video/audio, rather than then have to highlight all clips etc to the right and drag into this space to snap to last clip, is there a command to do this ?
    Such would save having to zoom out, until able to see all clips and timeline, select the lot, then zoom in again to be sure of dragging across the small gap created in my last edit.
    Envirographics

    Thanks Harm,
    not the most obvious sounding solution, sounds more like a deletion command ! and as for the word Ripple ? ! ...
    r/click 'refill from right' seems more user friendly but it does the job and many thanks to you.
    I shall remember it for the odd name.
    Envirographics

  • Report for listing all document flow for SD

    Hi expert,
    do you know any report from SAP or you have any sample report that can display and show all document flow for SD in one line...
    let say in selection screen i have contract number... so when i key in by contract number all detail and flow will display e.g
    conract  2000001 service order 3000000 delivery 4000000 invoice 5000000
    thanks.
    [SAP Notes & Tips|http://abap4beginner.blogspot.com/]

    hi,
    thanks for the solutions. Did others have experience on this situation?
    Thanks.
    [Abap Notes & Tips|http://www.abap4beginner.blogspot.com/]

  • Is there a Terminal command to list all Frameworks?

    I know I can see them in the System Information, but when I save the report and try to open it in Textedit, it's unreadable.

    The following will list the System frameworks but not necessarily every framework that you have installed by some third party application.
    system_profiler SPFrameworksDataType

  • What is the SQL command to list all tables in a access database(mdb)

    hi everyone
    can anybody tell me
    how to retreive and display total number of tables or total table name
    in a particular database in jsp page
    thank you .

    I dont think you can count the number of tables, maybe you mean number of rows in a table..If so, you need to make a method in your class and query to your database. Something like this:
    String count = "SELECT COUNT(*) FROM EMPLOYEES";
    Statement stmt = con.createStatement();
    rs = stmt.executeQuery(count);
    int rsInt = rs.getInt(1);The value of rsInt will result to the number of your tables.

  • What is the terminal command to list USB devices?

    In Ubuntu Linux the command lsusb lists all devices connected to the usb ports. What is the equivalent command in OS-X? Thanks.

    Linc:
    Thanks. The new thread, if you want to comment on it is:
    Activate/Deactivate USB connected device
    If I am able to deactivate or unattach or disable the driver that is responsible for controlling the usb web cam that I have in my Mac mini, the virtualization program (VBox) would be able to capture it (already configured with the appropriate filter) for my guest OS. Now, I only get a message saying that the camera is busy from a previous request.
    When I run your command, I get no response.

  • WLST command to list applications deployed

    Does any one know of any command to list all applications deployed on a pirticular server using WLST..

    To check the status of an application named "hello" deployed to the "AdminServer" do the following from WLST
    wls:/base_domain/domainConfig> domainRuntime()
    wls:/base_domain/domainRuntime> cd('AppRuntimeStateRuntime/AppRuntimeStateRuntime')
    wls:/base_domain/domainRuntime/AppRuntimeStateRuntime/AppRuntimeStateRuntime> ls()
    -r--   ApplicationIds                               java.lang.String[active-cache#[email protected], coherence-web-spi#[email protected], coherence#[email protected], dizzyworld, hello]
    -r--   Name                                         AppRuntimeStateRuntime
    -r--   Type                                         AppRuntimeStateRuntime
    -r-x   getCurrentState                              String : String(appid),String(moduleid),String(subModuleId),String(target)
    -r-x   getCurrentState                              String : String(appid),String(moduleid),String(target)
    -r-x   getCurrentState                              String : String(appid),String(target)
    -r-x   getIntendedState                             String : String(appid)
    -r-x   getIntendedState                             String : String(appid),String(target)
    -r-x   getModuleIds                                 String[] : String(appid)
    -r-x   getModuleTargets                             String[] : String(appid),String(moduleid)
    -r-x   getModuleTargets                             String[] : String(appid),String(moduleid),String(subModuleId)
    -r-x   getModuleType                                String : String(appid),String(moduleid)
    -r-x   getRetireTimeMillis                          Long : String(appid)
    -r-x   getRetireTimeoutSeconds                      Integer : String(appid)
    -r-x   getSubmoduleIds                              String[] : String(appid),String(moduleid)
    -r-x   isActiveVersion                              Boolean : String(appid)
    -r-x   isAdminMode                                  Boolean : String(appid),String(java.lang.String)
    -r-x   preDeregister                                Void :
    wls:/base_domain/domainRuntime/AppRuntimeStateRuntime/AppRuntimeStateRuntime> cmo.getCurrentState('hello','AdminServer')
    'STATE_ACTIVE'

Maybe you are looking for

  • Ater updating I can no longer access ny e-mails

    After adding an update that was stated to be necessary for extra security I open my web e-mail account but can't actually open the e-mails.Instead of saying you have a number of new e-mails it says 'you have undefined e-mails' but they won't open.I h

  • Directory for "Save as" from previous version

    When opening an InDesign document from a previous version, the "Save" command brings up the "Save As", asking to verify overwrite. Understandable, no issue with that. However, I'm wondering if there is a way to have the "Save As" location default to

  • MR11 Error

    GR happend for PO with movment type 101 and later GR has been reversed with Movement Type 102. IR has been received for this PO. After wards there is a Credit Momo Processed for this PO. When MR11 has been excuting for GR IR Clearing there is error m

  • HR schema script required

    HI All I am working on practice reports and following the oracle 10g toturail. There are sales, employee, departments, order, product etc tables. Kindly send me its schema if any one have. It would be great help.

  • How to design customize Cross tab in Crystal 9

    hi guys,             i'm having a big problem in designing this format in cross tab, coz it causes a lot of space that i wouldnt need in displaying the report in my application here's i want to show on my report, this is just a sample data, but this