Command for message that shows up on form

Hello,
Is there a way to change the message in the pink toolbar at the top of the form that tells users what to do? The default message right now on my form is "Please fill out the following form."
Thank you

I don't know of a way to change that particular message, but you could have a message box pop up when the user opens the form and display any message you like. You could put this script into the docReady event of any field you like.
app.alert("Your message text here");
Regards,
Dave

Similar Messages

Somehow my iPad got switched for messaging to showing from my email. There is no option showing to use my phone number. How do I get it back to my phone number? This happened when I upgraded my iPhone today, but it is using the phone number fine.

Somehow my iPad got switched for messaging to showing from my email. There is no option showing to use my phone number. How do I get it back to my phone number? This happened when I upgraded my iPhone today, but the iPhone messaging is using the phone number fine. It's only the iPad messaging that is messed up. Help, pls.
thanks!

You can link the phone number to the iPad again, if you follow the instructions here.
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ...
The relevant information for you will be at the end of the article. You may have to sign out of messages on the iPhone and the iPad and start all over again.

API for tools that show differences between two file in applet

I am searching Api for tools that show differences between two data file
that represent as bytes[] in the memory in applet .
the applet is not sign Applet.

I gotta it.
File f=new File("\\\\"+"Linshuaibing"+"\\card\\DSC00134.jpg");[Thank you very much v!

I had a message that shows my mail box is full, i have deleted all my file but unfortunatly it shows no change on the storage at all

i had a message that shows my mail box is full, i have deleted all my file but unfortunatly it shows no change on the storage at all

Ditto on Clinton's suggestion using OmniDiskSweeper. It is an excellent tool.
It may seem elementary, but do empty Trash. Only then do you gain storage space.
You may also find a few hints here:
http://pondini.org/OSX/DiskSpace.html
Ciao.

How do I get rid of the tips messages that show up just underneath the search box?

I have google as my home page. I am trying to figure out how to get rid of the tip or brief FYI message that shows up just underneath the search box. Can you help? Thanks

Do you mean the snippets that you see on the about:home Home page?
You can hide the box that shows the snippets with code in userContent.css
* http://kb.mozillazine.org/userContent.css
<pre><nowiki>@-moz-document url(about:home){
/* hide snippet container on the about:home page */
#snippetContainer { display: none !important; }
</nowiki></pre>
* http://kb.mozillazine.org/Editing_configuration
You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
* ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html

GWcheck errors for messages that failed to archive

There are numerous errors in the GWCheck logs for messages failed to
archive for one user. The cause is usually insufficient disk space in the
archive path. I moved his archive folder to a place with more disk space
sometime last year. It seems that the messages that were unable to archive
at the time are lost in limbo. They are no longer in the user's inbox and
are not in the archive. I spoke with the user and he stated that the
messages are no longer important.
The errors in gwcheck look like this:
Error 83- Item failed to archive
- Subject: Fwd: Dayton VA emergency renovation
- From: John Hall
- Date: Nov 6, 2009 - 1:47 pm
- First archive attempt date: Jul 25, 2011
- Number of archive attempts: 1
- Error number on last Archive attempt: 0x8204
9938 ITEM_RECORD check
Error 83- Item failed to archive
- Subject: Fwd: Building 700 Elevator and Building 701 Demoliton Facade/
Canopy Work
- From: John Hall
- Date: Jan 6, 2010 - 1:29 pm
- First archive attempt date: Jul 25, 2011
- Number of archive attempts: 1
- Error number on last Archive attempt: 0x8204
10585 ITEM_RECORD check
....ETC...
I found TID 7009495 that states the following:
Resolution
WARNING: THE FOLLOWING RESOLUTION WILL DELETE MAIL
GroupWise POA code level minimum must be 7.0.4 or 8.0.2HP2.
Run the following options on one or more users before running it against
an entire post office.
1) Run a standard expire reduce that covers the dates of these items and
verify that they are not purged (because of the outstanding archive
failure)
2) Add the IGNOREARCHIVEFAILURE option on the MISC tab of GWCheck and run
the same expire reduce again.
3) The new option should allow the items to be purged.
Additional Information
The most common reasons that the GroupWise items failed to auto-archive is
either because the archive disk filled up or there was a disruption in
communication to a remote archive store.
....QUESTION...
Will this only "delete" the failed to archive messages or will it affect
any messages for that user during those dates? I don't want to
accidentally delete any messages that need to be kept. I just want to
clear the messages that have failed.
Sorry for the long message. Thank you for your help.

In article <MQfOs.2116$[email protected]>, RSharp wrote:
> Error 83- Item failed to archive
> - Subject: Fwd: Dayton VA emergency renovation
> - From: John Hall
> - Date: Nov 6, 2009 - 1:47 pm
> - First archive attempt date: Jul 25, 2011
> - Number of archive attempts: 1
> - Error number on last Archive attempt: 0x8204
> 9938 ITEM_RECORD check
> Error 83- Item failed to archive
> - Subject: Fwd: Building 700 Elevator and Building 701 Demoliton Facade/
> Canopy Work
> - From: John Hall
> - Date: Jan 6, 2010 - 1:29 pm
> - First archive attempt date: Jul 25, 2011
> - Number of archive attempts: 1
> - Error number on last Archive attempt: 0x8204
> 10585 ITEM_RECORD check
>
That looks like they are from the GWCheck done July 25th, 2011. Are the
same messages still showing up in current contents check?
Do you run a regular purge only expire reduce? If not, run one soon, and
check those logs for any instance of errors purging. An expire of old
trashbin is also a worthwhile expire reduce job to run as part of this.
I'm assuming by your concern that these users have messages and such from
that time frame and earlier that they want to keep, hence making that TID
sound very suspicious for your purpose. If that assumption is invalid,
then that TID should be just fine for you, just be careful of your # of
days you pick.
GWAVA's Retain has hit similar issues and therefor has the tools built in,
but then this is a tool that archives without removing mail from the
primary storage. One client of mine still deletes mail over 999 days from
GroupWise itself just to retain efficient operations, relying on Retain
for anything older. That link supplied for next steps if my assumption
was correct.
http://support2.gwava.com/kb/?View=entry&EntryID=379
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: http://forums.novell.com/member.php?userid=75037

I can't seem to access new mail on my I pad . I can only see strings of messages that are related to each other. I also have lost the ability to search for messages that are no longer on display on my I pad.

I cannot seem to access properly any more the new e mail messages on my I pad. I can only see strings of messages that relate to each other.
Also I cannot search for old messages that have now disappeared . The search bar has disappeared.
Tom

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

HT3180 I owned an Apple tv and after upgrade my internet to higher speed my Apple Tv does not work the only message that show on the screen said if time and dates are not found go to apple/support/tv tried almost everything and nothing. Please somebody

I owned an Apple Tv and since I upgrade my internet to higher speed my Apple Tv does not work. Please someone help.

In most scenarios you shouldn't need to forward ports, however if you need to, you may be best contacting your ISP.
As with most router issues, I would recommend that you contact your ISP with details of your problem (assuming that it was your ISP that provided it to you).
There are simply too many manufacturers with different software features and settings and often different names for such features and settings, that the best advice will likely come from those that are knowledgeable about your particular router.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
53
TCP/UDP
DNS
DNS
80
TCP
HTTP
AirPlay, iTunes Store
123
TCP/UDP
NTP
Network Time
443
TCP
HTTPS
AirPlay, PhotoStream, iTunes Store
554
TCP/UDP
RTSP
AirPlay
1900
UDP
SSDP
Bonjour
3689
TCP
DAAP
iTunes, AirPlay, HomeSharing
5297
TCP
Bonjour
5298
TCP/UDP
Bonjour
5350
UDP
NAT
Bonjour
5351
UDP
NAT
Bonjour
5353
TCP/UDP
MDNS
Bonjour, AirPlay, HomeSharing
8000-8999
TCP
iTunes Radio Streams
42000-42999
TCP
iTunes Radio Streams
49159
UDP
MDNS (Win)
Bonjour, AirPlay
49163
UDP
MDNS (Win)
Bonjour, AirPlay
The following article(s) may help you.
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings

Best practice for messages that fails

Hi all,
In a scenario, for e.g. proxy -> XI -> WS
For e.g. if the Webservice service is down, we would have a message failure in XI.
What is the best practice in business scenario to handle such situations?
Appreciate any comments,

Hi,
In your initial question you didn't mentioned about Synchronous Scenario
You are right, if it is Synchronous Service message won't be persistent by default, although you can explicitly set the option to save sync messages also but it's not best practice.
As it is synchronous process the requestor will get response back and in any case(success or failure) , in case of any failure you can send the alert to the support person by configuring Alert in XI and the message need to be resend from the requestor system once the service is up.
Support person will fix the issue and will inform the requestor to send the message again.
*Reward points if answers your question.*
Thanks
Amit

How can I turn off the pop up message that shows up 3 times everytime I print

Every time I print whether a new cartridge has been installed or not, I get three pop up windows telling me the black, then the tri-color and the black again have been installed successfully. i have to click thru each one to be able to print. How can I turn this off.

What printer are you using?
What OS do you have?
Does it give a program name when it pops up, or does it just give you that message and a couple of options to choose from?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Web bot/crawler for sites that shows dynamic content

Hello
I need to create a web bot/crawler/spider that would go into different web sites and collect data for us and store in a database. The crawler needs to 'READ' the options on a website (either from drop-downs, radio-buttons or check-boxes ) to create some input itself OR use some generic predefined words (that we provide it with).
For example, a web page might be structure with a text field and some drop-downs. Typically, if the user enters the case number of a court case the web-site displays the status, and also there might be different legal documents they could be retrieved through drop-down options like: 'Industry Permits', 'Civil Cases', 'Criminal cases' etc. So the crawler should be able to read and self-generate a list of suitable options and use them to get the data. we want to create a bot/crawler/spider that will automatically enter the information about multiple cases etc. i.e. case numbers (text field), case type (from drop-downs) and retrieve the data about the relevant cases available on the website.
What is the best approach to achieve this? We can write individual bots for each website but are trying to come-up with a more intelligent bot or crawler that can be used to crawl multiple websites. Please advise on how we can achieve this.
We are not doing anything illegal, everything perfectly legal. Please advise on how we can achieve this.
Regards
Krishna

Google for JSpider. Very good, very extensible.

X4100 mount command for second drive shows device already mounted

I have a new x4100 system and I created a new partition and ext3 filesystem on the second drive. When I try to use that partition I get the error:
mount: /dev/sdb1 already mounted
Since this is a new system, that partition has never been used and I can't see anywhere that the device is in use. I tried the same thing on other systems and I get the same error. Has anyone seen this problem and if so how was it resolved?
thanks

Post Unix/Terminal queries to its forum under OS X Technologies.

Error while scanning is the message that it shows

There is a message that shows error while scanning .
dont know what has to be done .
please suggest how to overcome this problem.

Hello kunalbahrus,
Welcome to the HP Forums.
I see that you are having and issue when attempting to scan to the computer.
Please write me back with the exact error message the you are seeing when attempting to scan.
I am also going to give you the link to the HP Print and Scan Doctor. Please let me know if you see any error codes or messages.
I look forward to hearing back from you.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Reset Form button showing as Submit Form button?

Hello....
I have run into an odd issue that I can not figure out. For the past year, I have been creating and manually distributing various forms to our Sales Engineering group and outside partners. These forms are all designed from a common template we developed that includes a standard “Reset Form” button. Upon sending out a new form, I received an email with a screen shot that showed the Reset Form button as “Submit Form”. The partner went on to say that they thought it was the same as another form they have from me, which also shows a Reset Button as “Submit Form”
The end user states they are using Adobe 8.1.4. The forms were developed (9 Pro) LC Designer ES 8.2 and are set to be 8.0 or higher compatible. This is the first time I have heard of this and cannot figure out the cause. The label on the canned button itself is being changed from Reset to Submit.
Does anyone have any thoughts as to what would cause this and how to correct? I can not assume that this is the only time this has happened, but it is the first I am hearing of it.
Thank you and my apologies if this should have gone to another forum group
Chris Link, CTS, EAVA
Sr. Design Engineer

I have not heard of this before .....can you send the template to [email protected] so I can investigate? Please include a description of the issue in the email.
Paul

Is there a plug-in yet that will allow pdf forms to be opened in the browser and submitted?

Is there a plug-in yet for Firefox that will allow pdf forms to be opened in the browser (instead of downloaded), and then submitted to an e-mail address using the submit button on the form? I finally installed the plug-in that allows a pdf to open in Firefox and not downloaded, but the Submit button doesn't work.

Help. Same issue.

Command for message that shows up on form

Similar Messages

Maybe you are looking for