Command for view i/o rate cisco nexus

Hi
I need a command for view input and output rate on all interface for device nexus 7000 and nexus 5000
The command sh interface show more information, I only need view rx and tx
on switch 3750, 2960 i use sh interface summary and in nexus do not exist
Regards

Hi,
Show interface xxx | inc rate will give you in /out rate.
For example -sh int e1/1 | i rate
For show interface summary you can use grep feature on nexus multiple Include and exclude are possible.
show interface E1/1 | inc rate|MTU | exclude pps
Just to see interface counters -
show interface counters detailed all
Hope this helps.
Thanks
Ajay

Similar Messages

Command to View LDAP Password on Cisco ASA 5520

Hello
I am migrating from a Cisco ASA 5520 (ASA version 8.4(6)5 to a Cisco ASA 5585. We have LDAP issues logging into to our vpn client software. I assume the LDAP password may be incorrectly entered on the new 5585. No service password- encryption or more running:config won't show the encrypted LDAP password. What is the command to view that?
Thanks!
Matt

Thankyou Jennifer for the responds.
Could you please help me on how to enable "memberOf" attribute on AD to be pushed to ASA for the OU matching.
i have already set the "Remote Dialin" property of user account name "testvendor" in AD as "Allow Access" .It can be shown in the debug output as below.
[454095] sAMAccountName: value = testvendor
[454095] sAMAccountType: value = 805306368
[454095] userPrincipalName: value = [email protected]
[454095] objectCategory: value = CN=Person,CN=Schema,CN=Configuration,DC=abc,DC=local
[454095] msNPAllowDialin: value = TRUE
[454095] dSCorePropagationData: value = 20111026081253.0Z
[454095] dSCorePropagationData: value = 20111026080938.0Z
[454095] dSCorePropagationData: value = 16010101000417.0Z
Is their any other settings that i need to do it on AD ?
Kindly advice
Regards
Shiji

Cisco Nexus 5K + Micrososft Radius for Admin Authentication

Hi,
I have cisco 3750 switches configured to use MS radius for administrator authention. however, now I would like to add our cisco nexus switches to MS radius as well so that administrators are authenticated against the Microsoft radius for admin authention.
I tried it earlier but it won't accept 3750 commands.. Can you please help with me with a configuration example please that I can follow?
the commands I have used on 3750 are as follows:
aaa new-model
aaa authentication login vtylogin group radius local
aaa authentication login conlogin group radius local
aaa authentication enable default group radius enable
aaa authorization console
aaa authorization exec vtylogin group radius local
aaa authorization exec conlogin group radius local
radius-server host x.x.x.x key SECRETE
line con 0
exec-timeout 5 0
authorization exec conlogin
logging synchronous
login authentication conlogin
line vty 0 4
exec-timeout 0 0
authorization exec vtylogin
login authentication vtylogin
transport input ssh
line vty 5 15
exec-timeout 0 0
authorization exec vtylogin
login authentication vtylogin
transport input ssh

I have never done this before with ACS but not with NPS. However, you are in the right path. Nexus uses NX-OS which is different in some regards to regular IOS. One of those differences is the AAA setup. In NX-OS you assign users to roles. So for full access you will need to return the following attributes from your Radius server:
Attribute: cisco-av-pair
Requirement: Mandatory
Value: shell:roles*"network-admin vdc-admin"
For more information take a look at this link:
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/115925-nexus-integration-acs-00.html
Hope this helps
Thank you for rating helpful posts!

RS232 Serial commands for Cisco 32" LCDs

Are the serial commands for power on/off for the Cisco 32" LCDs different than the 40" and 52" monitors?
The "rs232.tx_hex=aa11fe010111" for power on and "rs232.tx_hex=aa11fe010010" work fine on the 40"s but the 32"s do not respond to these same commands.
I know the 40" and 52" LCDs are Samsung. The 32"s appear to be LG so I would suspect the serial commands would be different as well.
I have been unable to find any documentation for the 32"s.
Thanks in advance

Doug,
Have you tried using the Control TV icon in the DMP Manager?
You can power on and off the Cisco 30" from here along with
other rs232 control commands.
You also could use wireshark to sniff the wire to
see what codes the DMM are sending the DMP.
Cisco 32"\LG - RS232.Control
To use the RS232 commands on the DMP the serial port must be set to ON and
be pointed at the /dev/ttyS1 device.
To check this create a System Task to check your settings using Task 5
below. If your serial port is anything other than /dev/ttyS1 use Task 1
to set it correctly.
TASKS
=====
1. Create a system task under application
use type "set"
name it "RS232 ON"
init.startService_rs232=yes&rs232.device=/dev/ttyS1&mib.save=1&mng.reboot=1
2. Create system task "RS232 OFF"
use type "set"
init.startService_rs232=no&rs232.device=/dev/ttyS1&mib.save=1&mng.reboot=1
3. Create system task "Cisco 32N LCD ON"
use type "set"
rs232.tx_hex=6B612030312030310D
4. Create system task "Cisco 32N LCD OFF"
use type "set"
rs232.tx_hex=6B612030312030300D
5. Check DMP RS232 Settings (This setting will allow you to check the RS232
settings)
use type "get"
p=rs232.*
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.

How to open a database object for view/edit using a command (v. 3.2.20.09)

How can I open a database object for view or edit using a command in Oracle SQL Deveveloper?
I find browsing or search for object in a large database to be slow and too cumbersome.

Shift-F4 (pop-up descrribe) on a table name in the worksheet will let you view table details, but there is no quick edit.
You can use filters on the object browser to reduce the number of visible objects.

What's "SAVE" configuration command for Cisco switch/ router?

What's "SAVE" configuration command for Cisco switch / router? I know Switch#copy running-config startup-config works well,
but so long, any other command that easy to remenber?

What's "SAVE" configuration command for Cisco switch / router? I know Switch#copy running-config startup-config works well, but so long,
any other command that easy to remenber?
yes, here: Switch#write,and want to know more about the Cisco switch, please visit:http://www.3anetwork.com/cisco-switches-price_c1

Aborting the show file command ouput in cisco nexus

Hi all ,
In order to verify the md5 value in cisco nexus image we need to use show file bootflash:image md5sum command. But instead of that we given show file bootflash:image . And it is continiously showing the entire file content and full junk values coming in console. I have given ctrl+shift+6 to abort the ouput. But it is not stopping and now i am not able to do anything in console. Any suggestion to abort that.
Thanks,
Vijay

Hi All,
I just cleared the console session from tty lines using the below command,
clear line linename.
After this , console responded and we are able to access it.
Thanks,
Vijay.

I have Adobe Acrobat XI (ver 11.0.07). Adobe Help instructs me to find the document comparison command at "View Compare Documents," however, this command does exist on my screen. My View drop-down list does not include a command for Compare Documents.

I have Adobe Acrobat XI (ver 11.0.07). Adobe Help instructs me to find the document comparison command at "View > Compare Documents," however, this command does exist on my screen. My View drop-down list does not include a command for Compare Documents. Where else can I find this command?

What version of Acrobat do you have? This feature is only available in the Pro version, not in the Standard version.

Cisco Nexus 1000v Virtual Switch for Hyper-V Availability

Hi,
Does anyone have any information on the availability of the Cisco Nexus 1000v virtual switch for Hyper-V. Is it available to download from Cisco yet? If not when will it be released? Are there any Beta programs etc?
I can download the 1000v for VmWare but cannot find any downloads for the Hyper-V version.
Microsoft Partner

Any updates on the Cisco Nexus 1000v virtual switch for Hyper-V? Just checked on the Cisco site, however still only the download for VMware and no trace of any beta version. Also posted the same question at:
http://blogs.technet.com/b/schadinio/archive/2012/06/09/windows-server-2012-hyper-v-extensible-switch-cisco-nexus-1000v.aspx
"Hyper-V support isn't out yet. We are looking at a beta for Hyper-V starting at the end of February or the begining of March. "
-Ian @ Cisco Community
|| MCITP: EA, VA, EMA, Lync SA, makes a killer sandwich. ||

Command for compilation of views

Hi
what is the command for compilation of views,triggers,procesdures anf functions from SQL prompt
Regards
Najeeb
Message was edited by:
Rehman

not much of a searcher, are you. you didn't even need the search box - just scroll down on the page a bit and you would have seen it
to compile all invalid objects

Logging of commands on syslog server (Cisco Nexus 7010)

Please help.
How to set up logging of commands on syslog server ? (cisco nexus 7010)

Hi Igor
Nexus has internal accounting log: sh accouting log
But it can be sent only to the accounting server, not to a syslog server.
If you want - you man manually export it to some log.
HTH,
Alex

Simulator/Emulator for Cisco Nexus 7k, 5k

Do you guys know any good simulator or emulator for Cisco Nexus 7k or 5k ?

There aren't any at the moment. I have heard that Cisco has an internal one that is proprietary and not available to the public. Our only hope is to wait for the release of Cisco's VIRL aka Cisco Modeling Labs and hope that an NX-OS emulator will be included. However, when I was checking it out at this year's Cisco Live the current version did not have one :(
Thank you for rating helpful posts!

Ask the Expert: Cisco Nexus 2000, 5000, and 6000 Series Switches

with Cisco Expert Vinayak Sudame
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions how to configure and troubleshoot the Cisco Nexus 2000, 5000 and 6000 Series Switches with Cisco subject matter expert Vinayak Sudame. You can ask any question on configuration, troubleshooting, features, design and Fiber Channel over Ethernet (FCoE).
Vinayak Sudame is a Technical Lead in Data Center Switching Support Team within Cisco's Technical Services in RTP, North Carolina. His current responsibilities include but are not limited to Troubleshooting Technical support problems and Escalations in the areas of Nexus 5000, Nexus 2000, FCoE. Vinayak is also involved in developing technical content for Cisco Internal as well as external. eg, Nexus 5000 Troubleshooting Guide (CCO), Nexus 5000 portal (partners), etc. This involves cross team collaboration and working with multiple different teams within Cisco. Vinayak has also contributed to training account teams and partners in CAE (Customer Assurance Engineering) bootcamp dealing with Nexus 5000 technologies. In the past, Vinayak's responsibilities included supporting MDS platform (Fiber Channel Technologies) and work with EMC support on Escalated MDS cases. Vinayak was the Subject Matter Expert for Santap Technologies before moving to Nexus 5000 support. Vinayak holds a Masters in Electrical Engineering with Specialization in Networking from Wichita State University, Kansas. He also holds Cisco Certification CCIE (#20672) in Routing and Switching.
Remember to use the rating system to let Vinayak know if you have received an adequate response.
Vinayak might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community, Other Data Center Topics discussion forum shortly after the event.
This event last through Friday July 12, 2013. Visit the community often to view responses to youe questions of other community members.

Hi Vinayak,
Output of "show cfs internal ethernet-peer database"
Switch 1
ETH Fabric
Switch WWN logical-if_index
20:00:54:7f:ee:b7:c2:80 [Local]
20:00:54:7f:ee:b6:3f:80 16000005
Total number of entries = 2
Switch 2
ETH Fabric
Switch WWN logical-if_index
20:00:54:7f:ee:b6:3f:80 [Local]
20:00:54:7f:ee:b7:c2:80 16000005
Total number of entries = 2
Output of "show system internal csm info trace"
Switch 1 in which "show cfs peers" show proper output
Mon Jul 1 05:46:19.145339 (CSM_T) csm_sp_buf_cmd_tbl_expand_range(8604): No range command in buf_cmd_tbl.
Mon Jul 1 05:46:19.145280 (CSM_T) csm_set_sync_status(6257): Peer RT status PSSed
Mon Jul 1 05:46:19.145188 (CSM_T) csm_sp_handle_local_verify_commit(4291):
Mon Jul 1 05:46:19.145131 csm_continue_verify_ac[597]: peer is not reachable over CFS so continuing with local verify/commit
Mon Jul 1 05:46:19.145071 csm_tl_lock(766): Peer information not found for IP address: '172.16.1.54'
Mon Jul 1 05:46:19.145011 csm_tl_lock(737):
Mon Jul 1 05:46:19.144955 (CSM_EV) csm_sp_build_tl_lock_req_n_send(941): sending lock-request for CONF_SYNC_TL_SESSION_TYPE_VERIFY subtype 0 to Peer ip = (172.16.1.54)
Mon Jul 1 05:46:19.143819 (CSM_T) csm_copy_image_and_internal_versions(788): sw_img_ver: 5.2(1)N1(2a), int_rev: 1
Mon Jul 1 05:46:19.143761 (CSM_T) csm_sp_get_peer_sync_rev(329): found the peer with address=172.16.1.54 and sync_rev=78
Mon Jul 1 05:46:19.143699 (CSM_T) csm_sp_get_peer_sync_rev(315):
Mon Jul 1 05:46:19.143641 (CSM_EV) csm_sp_build_tl_lock_req_n_send(838): Entered fn
Mon Jul 1 05:46:19.143582 (CSM_T) csm_set_sync_status(6257): Peer RT status PSSed
Switch 2 in which "show cfs peers" does not show proper output
Mon Jul 1 06:13:11.885354 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 77 seq 482
Mon Jul 1 06:13:11.884992 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd channel-group 51 mode active, cmd pseq 357 seq 369
Mon Jul 1 06:13:11.884932 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport trunk allowed vlan 2, 11, cmd pseq 357 seq 368
Mon Jul 1 06:13:11.884872 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 357 seq 367
Mon Jul 1 06:13:11.884811 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd description process_vpc, cmd pseq 357 seq 366
Mon Jul 1 06:13:11.884750 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd channel-group 51 mode active, cmd pseq 352 seq 365
Mon Jul 1 06:13:11.884690 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport trunk allowed vlan 2, 11, cmd pseq 352 seq 364
Mon Jul 1 06:13:11.884630 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 352 seq 363
Mon Jul 1 06:13:11.884568 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd description process_vpc, cmd pseq 352 seq 362
Mon Jul 1 06:13:11.884207 (CSM_EV) csm_sp_acfg_gen_handler(3011): Preparing config into /tmp/csm_sp_acfg_1733916569.txt
Mon Jul 1 06:13:11.878695 csm_get_locked_ssn_ctxt[539]: Lock not yet taken.
Mon Jul 1 06:13:11.878638 (CSM_EV) csm_sp_acfg_gen_handler(2937): Recieved sp acfg merge request for type: running cfg
Mon Jul 1 06:12:29.527840 (CSM_T) csm_pss_del_seq_tbl(1989): Freeing seq tbl data
Mon Jul 1 06:12:29.513255 (CSM_T) csm_sp_acfg_gen_handler(3106): Done acfg file write
Mon Jul 1 06:12:29.513179 (CSM_EV) csm_sp_acfg_gen_handler(3011): Preparing config into /tmp/csm_sp_acfg_1733911262.txt
Mon Jul 1 06:12:29.508859 csm_get_locked_ssn_ctxt[539]: Lock not yet taken.
Mon Jul 1 06:12:29.508803 (CSM_EV) csm_sp_acfg_gen_handler(2937): Recieved sp acfg merge request for type: running cfg
Mon Jul 1 05:53:17.651236 Collecting peer info
Mon Jul 1 05:53:17.651181 Failed to get the argumentvalue for 'ip-address'
Mon Jul 1 05:40:59.262736 DB Unlocked Successfully
Mon Jul 1 05:40:59.262654 Unlocking DB, Lock Owner Details:Client:1 ID:1
Mon Jul 1 05:40:59.262570 (CSM_T) csm_sp_del_buf_cmd(1713): Deleting comand with Id = 1
Mon Jul 1 05:40:59.262513 DB Lock Successful by Client:1 ID:1
Mon Jul 1 05:40:59.262435 Recieved lock request by Client:1 ID:1
Mon Jul 1 05:40:41.741224 ssnmgr_ssn_handle_create_get: Session FSM already present, ID:1
Mon Jul 1 05:40:41.741167 ssnmgr_handle_mgmt_request: Create/Get request received for session[process_n5kprof]
show cfs lock gives no output.
Just to further clarify, we have 4 5548UP switches in the same management vlan. 2 switches are in one location lets say location A and they are CFS peers and are working fine.
These two switches which are having problem are in location B. All the switches are in the same vlan. Essentially the all CFS multicast messages will be seen by all 5548 switches as they are in the same vlan. I am assuming that this might not create any problems as we specify the peers in the respective configurations. Or do we have to change the CFSoIPv4 multicast addresses in location B or may be configure a different region.
Regards.

Ask the Expert: Basic Introduction and Troubleshooting on Cisco Nexus 7000 NX-OS Virtual Device Context

With Vignesh R. P.
Welcome to the Cisco Support Community Ask the Expert conversation.This is an opportunity to learn and ask questions of Cisco expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and support for the Cisco NX-OS Software platform .
The Cisco® Nexus 7000 Series Switches introduce support for the Cisco NX-OS Software platform, a new class of operating system designed for data centers. Based on the Cisco MDS 9000 SAN-OS platform, Cisco NX-OS introduces support for virtual device contexts (VDCs), which allows the switches to be virtualized at the device level. Each configured VDC presents itself as a unique device to connected users within the framework of that physical switch. The VDC runs as a separate logical entity within the switch, maintaining its own unique set of running software processes, having its own configuration, and being managed by a separate administrator.
Vignesh R. P. is a customer support engineer in the Cisco High Touch Technical Support center in Bangalore, India, supporting Cisco's major service provider customers in routing and MPLS technologies. His areas of expertise include routing, switching, and MPLS. Previously at Cisco he worked as a network consulting engineer for enterprise customers. He has been in the networking industry for 8 years and holds CCIE certification in the Routing & Switching and Service Provider tracks.
Remember to use the rating system to let Vignesh know if you have received an adequate response.
Vignesh might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community discussion forum shortly after the event. This event lasts through through January 18, 2013. Visit this forum often to view responses to your questions and the questions of other community members.

Hi Vignesh
Is there is any limitation to connect a N2K directly to the N7K?
if i have a an F2 card 10G and another F2 card 1G and i want to creat 3 VDC'S
VDC1=DC-Core
VDC2=Aggregation
VDC3=Campus core
do we need to add a link between the different VDC's
thanks

Ask the Expert: Configuration, Design, and Troubleshooting of Cisco Nexus 1000

With Louis Watta
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about design, configuration, and troubleshooting of Cisco Nexus 1000V Series Switches operating inside VMware ESXi and Hyper-V with Cisco expert Louis Watta. Cisco Nexus 1000V Series Switches deliver highly secure, multitenant services by adding virtualization intelligence to the data center network. With Cisco Nexus 1000V Series Switches, you can have a consistent networking feature set and provisioning process all the way from the virtual machine access layer to the core of the data center network infrastructure.
This is a continuation of the live Webcast.
Louis Watta is a technical leader in the services organization for Cisco. Watta's primary background is in data center technologies: servers (UNIX, Windows, Linux), switches (MDS, Brocade), storage arrays (EMC, NetApp, HP), network switches (Cisco Catalyst and Cisco Nexus), and enterprise service hypervisors (VMware ESX, Hyper-V, KVM, XEN). As a Technical Leader in Technical Services, Louis currently supports beta and early field trials (EFTs) on new Cisco software and hardware. He has more than 15 years of experience in a wide variety of data center applications and is interested in data center technologies oriented toward data center virtualization and orchestration. Prior to Cisco, Louis was a system administrator for GTE Government Systems. He has a bachelor of science degree in computer science from North Carolina State University. .
Remember to use the rating system to let Louis know if you have received an adequate response.
Louis might not be able to answer each question because of the volume expected during this event. Remember that you can continue the conversation on the Data Center community Unified Computing shortly after the event.
This event lasts through Friday, JUne 14, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.
Webcast related links:
Slides
FAQ
Webcast Video Recording

Right now there is only a few features that are not supported on N1Kv on Hyper-V
They are VXLAN and QOS Fair Weighted Queuing. We are currently demoing VXLAN functionality at Microsoft TechEd Conference this week in New Orleans. So VXLAN support should be coming soon. I can't give you a specific timeline.
For Fair Weighted Queuing I'm not sure. In the VMware world we take advantage of NETIOC infrastructure. In the MS world they do not have a NETIOC infrastructure that we can use to create a similar feature.
Code base parity (as in VMware and Hyper-V VSMs running NXOS 5.x) will happen with the next major N1KV release for ESX.
Let me know if that doesn't answer your question.
thanks
louis

Command for view i/o rate cisco nexus

Similar Messages

Maybe you are looking for