Command line with flash magic

Hi :
I want to control on flash magic application using command line with Labview, I look into this application and I see that I can send through command line all I need
Please read what they said aboue using command lines
Before you can run FM.EXE on the command line you must set up your PATH environment
variable to point to the folder FM.EXE is stored in. This is done automatically during
installation, however you must restart your machine before the change to the PATH variable
is recognized when using Windows 95/98/ME. You must restart your machine or log out
then back in again before the change to the PATH variable is recognized when using
Windows NT/2000/XP.
Commands are passed to FM.EXE in the form or either directives or a Command File
containing directives.
The command line will have the following syntax:
FM [directives]
For example the following command line:
Description: Specifies the PC Serial (COM) communicating
Type:      Configuration
Syntax:    COM(port, baudrate)
      Where:
      port    The COM Port t
      baudrate :
          2400
          4800
          9600
          19200
          38400
          57600
Output:    Connected
      Or: Connection failed: reason
      Where:
      reason   The reason the
Default:    COM 1, baudrate of 19200 (COM(1, 19200))
Examples:        COM(1H, 9600)
                        COM(1, 0x2580)
                        COM(0x01, 2580H)
I try to used this command line with Labview but I always get error attach see file please
What I am doing wrong ?????
Attachments:
error.JPG ‏66 KB

Hi CofeeBreak,
Thank you for your comment, but I was able to find the problem (didn't solve it yet): In the FM command line interface, calling a HEX file located in a folder with brackets in its name, such as "C:\hello_World(V1)\LabVIEW.hex" will not be recognized by the FM.exe, whereas "C:\hello_World_V1\LabVIEW.hex" will work just fine. In the Flash Magic GUI and Command Line Manual section on hex files there is no mention of that, my solution at the moment is to remove the brackets from folder names.
Thanks
Amir

Similar Messages

How to install adobe flash player through command line with some script

Hi Guys,
Do you know how to install adobe flash player through command line with some script?
Thanks,
Galina

Windows. I tried silent install with "install_flash_player.exe /install" but it works only with one file that I downloaded from adobe.com - "install_flashplayer10_mssd_aih.exe". But it is possible to download this last file only one time, every next time it redirects me to download install_flash_player.exe file.

Invoking XSLT from the Command Line with JRE1.4 and JRE1.5

When I invoke XSLT from the Windows Command Line with "java.exe org.apache.xalan.xslt.Process -IN OldFile.xml -XSL StyleSheet.xsl -OUT NewFile.xml" it worked fine with JRE1.4.
Then I installed JRE1.5.0_09. The class "org.apache.xalan.xslt.Process" was moved to "com.sun.org.apache.xalan.internal.xslt.Process". But when I call it with "java.exe com.sun.org.apache.xalan.internal.xslt.Process -IN OldFile.xml -XSL StyleSheet.xsl -OUT NewFile.xml" I get the error "Exception in thread "main" java.lang.NoSuchMethodError: main". When I look into the Process class there is no "main", but a "public static void _main(String argv[])".
The "JAXP Compatibility Guide for the J2SE Platform, versions 1.4 and 1.5" on "http://java.sun.com/webservices/docs/1.6/jaxp/JAXP-Compatibility_150.html" chapter "Invoking XSLT from the Command Line" claims it should work.
Is there no more chance to invoke XSLT from the Windows Command Line? Why is "main" renamed to "_main"? Is the documentation wrong or is this a bug?

When I invoke XSLT from the Windows Command Line with "java.exe org.apache.xalan.xslt.Process -IN OldFile.xml -XSL StyleSheet.xsl -OUT NewFile.xml" it worked fine with JRE1.4.
Then I installed JRE1.5.0_09. The class "org.apache.xalan.xslt.Process" was moved to "com.sun.org.apache.xalan.internal.xslt.Process". But when I call it with "java.exe com.sun.org.apache.xalan.internal.xslt.Process -IN OldFile.xml -XSL StyleSheet.xsl -OUT NewFile.xml" I get the error "Exception in thread "main" java.lang.NoSuchMethodError: main". When I look into the Process class there is no "main", but a "public static void _main(String argv[])".
The "JAXP Compatibility Guide for the J2SE Platform, versions 1.4 and 1.5" on "http://java.sun.com/webservices/docs/1.6/jaxp/JAXP-Compatibility_150.html" chapter "Invoking XSLT from the Command Line" claims it should work.
Is there no more chance to invoke XSLT from the Windows Command Line? Why is "main" renamed to "_main"? Is the documentation wrong or is this a bug?

Invoking Forms 6i application from command line with parameters

Hi,
I have a java application that requires to start up and execute an existing Forms 6i application.
I am not a java person, and I could not find any help regarding this. If anyone knows how to execute an fmx(6i) from within a java application, then please let me know. The java application has to pass in parameters so that the the Forms application opens up with the correct data.
One alternative suggested was that the java application execute a command line invocation of the Forms application. I am looking for the correct and complete syntax to do this. The fmx can be invoked from the command line with the following entered at the dos prompt -
c:\>OraFrm6i\Bin\ifrun60.exe<module name> <userid/password@db>. This works fine and the Forms application is executed.
The requirement is to pass a couple of user defined parameters to the Forms application which can be used by it to query the database and display the correct information when it opens.
Any help on this would be greately appreciated.
Thanks
Shailesh

Shailesh,
Create a parameter in your form - eg. COUNTRY_CODE and add any startup code.
Then add the parameter to your command line (or put it in a *.bat file)
c:\>OraFrm6i\Bin\ifrun60.exe<module name> <userid/password@db> country_code=UK
JR

Open application via. command line with parameters - Multiple times

I'm using ANT to compile a program, then launch in FireFox ... I've looked all over for a solution to this, but have yet to find one.
I need the command to open a specified URL in FireFox... easy enough, right?
Solution #1 was to use the "open -a" command, with the URL- so "open -a FireFox.app/ http://someURL.com" ... the problem with this is that it opens a new window or tab every time- its a minor annoyance, but when you do 100 or more compiles during the day, its quite annoying.
Solution #2 is to actually launch the program executable (FireFox.app/Content/MacOS/firefox) using the argument -url and that makes it so FireFox opens the URL in the current & front-most window. This worked great the first time, second time I get an error saying "A copy of Firefox is already open. Only one copy of Firefox can be open at a time."
Anybody know how to make it so I don't have to close a window every time I compile? Your help would be greatly appreciated.
Thanks!
-Eric
Message was edited by: eheaton

If you don't get an answer here, you might try reposting in the UNIX forum. That's where the command line experts tend to hang out. Good luck.

Running Jar vs. command line with libraries

Hi everybody,
I have an application that works well from the command line, which relies on 3 libraries, all of which are in the same directory. My current directory structure is like this:
Main Folder
-> Library 1
-> Library 2
-> Library 3
-> Run script
-> Source Folder ("source")
->-> Code and main class
Library 1 depends on both Library 2 and Library 3. When I run from the command line, from the main folder, using this command:
java -Djava.library.path=. source/MainClass
My program runs fine.
The problem comes when I try to package it into a Jar and replicate the directory structure.
My manifest is:
Manifest-Version: 1.0
Main-Class: source.MainClass
<newline>
and my jar command is:
jar cvmf Manifest.txt test.jar source/*.class
When I try to run my jar, I get this error:
Exception in thread "main" java.lang.UnsatisfiedLinkError: /home/MainDirectory/Library1.so: Library2.so: cannot open shared object file: No such file or directory
I know what this means-- for some reason it doesn't know where Library2 is-- but I'm mystified as to why this works fine from the command line and not from a jar. Can anyone help me figure this out, please?
Thanks,
Jezzica85

warnerja wrote:
Wrong question. You still want to run it via java -jar, but...
Your jar needs a MANIFEST.MF (if I recall correctly, that is the right file name) in its META-INF folder (again, if I recall correctly) which needs to set up the classpath via a Class-Path=... line in the file.
Actually you probably already do have such a file (you need it anyway for the jar to figure out what the main class is to execute), but it probably doesn't contain a Class-Path entry or is incorrect.
Google for jar manifestI've had less than stellar success on correcting the big boys lately, but why should I let that stop me...
As far as I can tell, the OP seems to be having problems with native link libraries. Some java class loads Library1 then (it appears) Library1 attempts to load Library2.
Would fixing a CLASSPATH help that?
I would expect it to be a problem with LD_LIBRARY_PATH (ala Sabre's earlier reply).

How to create an alias for a custom command line with paramters

Is it possible to create an icon that runs a terminal command line ?
What i want to do is start firefox with a specific profile. In terminal this is done by using Firefox -P [profileName]
How can I put this in an alias (or something else) ?
I tried creating an alias that changing the original but it won't let me insert a command line.
Any help ?

In my .profile this works: alias f="/Applications/Firefox.app/Contents/MacOS/firefox -P doug"
for starting under my profile. Make sure you run source ~/.profile if you add an alias to .profile
Starting default FFox profile is /Applications/Firefox.app/Contents/MacOS/firefox -P swxazqvy.default
And for Desktop icon to start whichever profile, open Script Editor and paste with proper changes(and save as an app(maybe to Desktop again?) :
do shell script "/Applications/Firefox.app/Contents/MacOS/firefox -P doug"
And you can make an executable with icon in a bash script with above and chmod u+x it and save to Desktop too.
Message was edited by: doug pennington

Using the command line with DESKI to run a specific module in a report

I'm using BOXI R2 Desktop edition in a Windows Environment.
I have a report with a macro inserted in it which is composed of several sub-modules.
I know I can launch the report from the command line as follows: "C:\PROGRAM FILES\BUSINESS OBJECTS\BUSINESSOBJECTS\BUSOBJ.EXE" -user "USERID" -pass "PSWD" "Directory and Filename" -keyfile "Keyfilename" -nologo
What I want to know is can I launch the report from the command line and call a specific module. So if I have 5 modules in a single report, can I just call 1 from the command line?
How would that be formatted?
Thanks in advance.

There's some more stuff to be done to correctly call external executables.
Read [When Runtime.exec() wont|http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html], it shows some of the pitfalls of Runtime.exec().
Edit: there's also JRuby, which might be worth a try.

How to run report on command line with user parameter?

Hi,
How do I run oracle report on command line (batch) with pre-set User Parameter values ? e.g. :P_1 ='SYSDATE' , :P_2 = 'DEPT_NO'
Thanks

Hello,
If you are using rwrun :
rwrun report=myreport destype=file desname=c:\temp\myreport.pdf desformat=pdf P_1='SYSDATE' P_2='DEPT_NO' userid=scott/tiger@dbalias
If you are using rwclient , just add server=<reports server name> :
rwclient server=myrepsevrername report=+myreport+ destype=file desname=c:\temp\myreport.pdf desformat=pdf P_1='SYSDATE' P_2='DEPT_NO' userid=scott/tiger@dbalias
Regards

How to use command line with acrobat to extract page(s) from pdf file?

I have adobe acrobat, and have a pdf file with over 500 pages. I need to extract small chunks of pages from it as seperate pdf files. I was hoping I could use command line interface to do this faster.
Something like:
acrobat src des start end
so for example
adobe file.pdf my_folder 3 5
Is this possible? There are many chunks and I don't want to manually do it for every chunk. Command line would be much easier...
Thanks

I can't find any programs... sorry.
Can you create one for me please.
It should at least have these 5 arguments: (well the first one is not neccessary since were not using acrobat anymore...)
[program] [src path/src file] [destination path/file name] [start page (inclusive)] [end page (inclusive)]
for example:
acrobat ./my_file.pdf ./my_folder/chunk1.pdf 3 5
if start page == end page, then it only extracts that one page.
So this way I can just stack these comands on a .bat file or something (maybe like 100 commands), then run the bat file, and it will create all the files.
Thanks for doing this, it is appreciated.

Slow processing time, via Command line, with Reader

I'm using Reader 9, via command line, to process PDFs in a 3rd party application and it's taking much longer to process files this way than with Acroplot or Ghostscript. Is there a way to improve this processing time?
thanks

Ladies and gentlemen.....I have solved my problemo!
The reason why the rest of the reports were getting the 'could not open file.' error was due to the fact that each discoverer instance launched was
trying to access the same standard log file simultaneously.
I modified each cmd file to write logging info to individual files: eg
/logfile "H:\Projects\DRP Import Modelling\Automation\input2_log.txt"
Now that's there's no contention with logging, the reports are firing off beautifully in parallel :)
I am definitely having a beer this evening!
Thanks for everyone's input...kept me on the righteous path :)

How to create user in workspace using command line with Internal APEX

Hi fellows,
I'm newbie with APEX and my i try doing something different. I need to build one application in Internal for create users in another workspaces. So, for do this, need use command line and PL/SQL code.
I know exists a CREATE_USER procedure. But, this procedure just create a user in Internal, not in workspace, like i want.
Its possible? Someone can help me?
Example of create_user procedure:
BEGIN
APEX_UTIL.CREATE_USER(
     p_user_name => 'NEWUSER2',
     p_first_name => 'FRANK',
     p_last_name => 'SMITH',
     p_description => 'Description...',
     p_email_address => '[email protected]',
     p_web_password => 'password',
     p_developer_privs => 'ADMIN:CREATE:DATA_LOADER:EDIT:HELP:MONITOR:SQL',
     p_default_schema => 'MY_SCHEMA',
     p_allow_access_to_schemas => 'MY_SCHEMA2',
     p_change_password_on_first_use => 'N',
     p_attribute_01 => '123 456 7890');
END;
Thank you.

Did you try it like this?
DECLARE
   l_workspace_id      number;
BEGIN
    l_workspace_id := apex_util.find_security_group_id (p_workspace => 'MY_WORKSPACE_NAME');
    apex_util.set_security_group_id (p_security_group_id => l_workspace_id);
APEX_UTIL.CREATE_USER(
     p_user_name => 'NEWUSER2',
     p_first_name => 'FRANK',
     p_last_name => 'SMITH',
     p_description => 'Description...',
     p_email_address => '[email protected]',
     p_web_password => 'password',
     p_developer_privs => 'ADMIN:CREATE:DATA_LOADER:EDIT:HELP:MONITOR:SQL',
     p_default_schema => 'MY_SCHEMA',
     p_allow_access_to_schemas => 'MY_SCHEMA2',
     p_change_password_on_first_use => 'N',
     p_attribute_01 => '123 456 7890');
END;

Running reports via command-line with /batch option

Hi,
I have created a batch file which runs, and exports the results of 7 different discoverer reports with /batch option.
Contents of batch file:
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input1.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input2.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input3.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input4.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input5.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input6.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input7.txt"
Sample of a cmd file the bacth file runs:....
/connect user/password@oraprd /apps_responsibility "BIS Super User"
/open "H:\Projects\DRP Import Modelling\Dev\Intransit Extract.dis"
/sheet 1 /export xls "H:\Projects\DRP Import Modelling\automation\Intransit Input.xls" /batch
The batch file runs ok and processes each report in sequence, and creates the excel export one after the other.
However, I need to process the 7 reports in parallel, so changed the batch file to process in own thread :
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input1.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input2.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input3.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input4.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input5.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input6.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input7.txt"
The reports kick off at the same time and I can see 7 dis4usr.exe processes running via task manager
Problem:
The first reports runs and exports ok.
All the others dis4usr.exe processing stops with the following error pop-up:
! Could not open file. OK
Question:
Can you only process reports sequentially via command line mode with /batch option?
If not...what am I missing...its driving me insane :)
All asistance is greatly appreciated. Thanks

Ladies and gentlemen.....I have solved my problemo!
The reason why the rest of the reports were getting the 'could not open file.' error was due to the fact that each discoverer instance launched was
trying to access the same standard log file simultaneously.
I modified each cmd file to write logging info to individual files: eg
/logfile "H:\Projects\DRP Import Modelling\Automation\input2_log.txt"
Now that's there's no contention with logging, the reports are firing off beautifully in parallel :)
I am definitely having a beer this evening!
Thanks for everyone's input...kept me on the righteous path :)

Running report from command line with multiple value for same parameter

Hey,
I know how to run a report from the command line specifying parameters values each time but I was wondering if someone could tell me how I would go about running the same report multiple times in a batch program but specifying a list of values to pass to a parameter each time.
So for example if a parameter was 'School Number', how could I run a report in a batch program that would pass a school number to the report as a parameter using a list of school numbers generated for a sql statement or something. So if I had 300 school numbers in my list then I would get 300 different reports when the batch program finished.
This leads me to another question. How can I dynamically change the name of the report generated by the batch to use the school number value passed in, so for example if the value 3 was passed in the name would be something like School 3.pdf, if 4 was passed in the name would be School 4.pdf....etc
Any help on this?
Thanks

Hello,
Bursting and Distribution may help you ....
37 Bursting and Distributing a Report
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_dist.htm
Regards

Command line with templet? Wan't a "Job action" to upload to Youtube.

I'm looking for a automated way to upload to Youtube. We now have job actions in compressor that will do this but it's not stored in a "droplet". Is there a way from the command line to do this? I'm hoping to create a watch folder that will trip a script that will add the file and upload all in one.
Can a templet be used in a command line maybe?
I also have Final Cut server if that could help.

So either install and configure the
Python YouTube API
or
the Ruby "youtube_g" RubyGem
Once installed if you can write a script to have Final Cut Server upload stuff to YouTube.
Or you could write Compressor script to do this as well.
Hope this helps.
Nicholas Stokes
XPlatform Consulting

Command line with flash magic

Similar Messages

Maybe you are looking for