Command to Re-Conform a specific clip?

I have a project with many R3D files(Red One and MX). And it takes a long time to conform the media when I open the project.
I have noticed that conforming will stop for a while then randomly start up again like 15 min later.
I am having audio issues for certain files throughout the project some just have no audio. The box is there but no audio.
I think this is a .cfa issue, seeing as I have deleted specific .cfa files and sometimes Premiere reconforms that clip and the audio works.
My question is there a command to re-conform a specific clip inside Premiere CS5?
So I dont have to search in the library>app support>adobe>common...delete .cfa file etc?
Thanks hope someone has an answer.

Thanks for the response.
I am aware that it is not supposed to conform footage that has already been conformed, but it is still doing it every time.
I am thinking this must be a problem with how PPro handles R3D files, or R3D riles from the MX sensor.

Similar Messages

I go to "clip adjustments" and change the length of a photo. It reverts back to original length. I also shorten it by moving the yellow "box" around a specific clip. It still reverts back to original length. Why?

I go to "clip adjustments" and change the length of a clip. It reverts back to original length. I've also tried to shorten it by moving the yellow "box" around a specific clip to shorten. It still reverts back to original length. Why?

Welcome to iMovie Discussions.
See my 2nd reply to 'getzcreative', here.

Format of the initialization string does not conform to specification starting at index 97 while uploading .xlsx file

Format of the initialization string does not conform to specification starting at index 97.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ArgumentException: Format of the initialization string does not conform to specification starting at index 97.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

I want to create an applescript/automator tool to launch the "Add to library" command in iTunes with a specific path. Need process under the hood

I want to create an applescript/automator tool to launch the "Add to library" command in iTunes with a specific path. I need to know what process is run under the hood to create such a script.
To put you in context, I have an NFS mount point with all my music and with the "add to library" command, I can add more music to the folder and update iTunes without dragging the individual folders or the whole mount point and avoid having the songs show up as doubles.
Anyone know what OS/Unix process is being called for such a command?

I want to create an applescript/automator tool to launch the "Add to library" command in iTunes with a specific path. I need to know what process is run under the hood to create such a script.
To put you in context, I have an NFS mount point with all my music and with the "add to library" command, I can add more music to the folder and update iTunes without dragging the individual folders or the whole mount point and avoid having the songs show up as doubles.
Anyone know what OS/Unix process is being called for such a command?

Can anyone help with Double Command issues. This a specific keyboard question and they do not seem to know.

Before I go into a lengthy explanation of the problem: Can anyone help with Double Command issues. This a specific keyboard question and they do not seem to know.
Thanks much.
Emile

Choose Force Quit from the Apple menu and close Mail from there.
(103661)

Cinema Tools won't let me conform a video clip

I'm using FCP 7 and CT 4.5. I want to conform a 30p clip to 24p in CT, but when I open the clip in CT, the "conform" button isn't clickable/activated. However, when I open other clips, the button is clickable.
What are possible reasons that CT won't allow you to conform a clip?

Well, since FCP-7 does not work correctly or reliably with H.264 files, use Compressor to convert your source material to an edit friendly codec such as ProRes.
Once that is done, you can use Cinema Tools if you want to, and the whole experience in FCP will be better.
MtD

Auto conform sequence to clip?

So this new version of FCP is supposed to be able to conform sequences to the first clip placed in it. Which would be wonderful, something that I've enjoyed in After Effects for quite some time.
But I can't seem to get this to work. I've tried having the setting on 'ask' and tried it on 'always' but it doesn't ever seem to change the sequence when I drop a clip in.
Any suggestions on how to get this to work?
Thanks!
G5 Dual 2.0 Mac OS X (10.4.10)

When you try to place a second clip on the timeline, which has different caratteristics from the 1st one a window should automatically appear asking you if you wish to conform the new clip settings to the one already in the timeline. You should then click yes!

Bad conform of DVCPROHD clip?

I shot a clip with 50fps in 720/25p with Panasonic HVX200 and I have to conform the clip into 25fps so that FCP can read in slow motion.
After make the conform and opened the file in FCP, all is ok, the clip appears to be 960x720 but the problem is if I open that file into Motion or Shake the resulation of the file is 480x360. The info in Quicktime just tell me that the file have 480x360.
What happen? I need this file in true DVCPROHV real size.
Just a note, I'm in a PAL zone.

As part of clearing out space, I'm trying to move some movies to my external drive. I have noticed in the past however that iDVD files are not very fond of being moved, or of any file remotely associated with a project's contents being moved. If I have a folder which contains a DVD project and its associated movies, will it work after it's moved? Or will its criteria for referencing where certain files are suddenly have been proven false? Additionally, in general is there any way I can reduce the contriction iDVD makes on the mobility of movie files? Or if I want to keep a project for future burning do I need to keep all its files in the same place?
Lastly, why are some iDVD projects gigabytes in size wheras others are a few hundred megabytes (with similar amounts of footage)? Do some include the movies within the file, and other merely reference them as described above? I'll also post this question in the iDVD forums if need be, but I suppose its somewhat related to iMovie. (iDVD 6 by the way)

How can I export a specific clip on the timeline?

Hey all
Ive got a specific (Compound) clip that I'd like to export as FCPX is really not handling it very well.
Its actually sped up 1000%, has a Bad TV effect and colour changed. Its actually making the rest of my footage go out of sync with the audio (I guess its just too much for my system to handle)
I cant simply V disable out all the rest of the clips below it (theyre mulitcam) as you cant
select all V
them (it just doesnt disable them all)
without going in and disabling each and every clip how can I just export my highlighted clip?
Thanks

Cmd-C to copy; create a new temporary project, paste into it and export.

Looking for a command to go to a specific page in a long Pages document.

I am writing an illustrated book and often need to go to a specific page number. Is there a 'go to page x' facility on MacBooks? Have asked my otherwise superb trainers in the local Apple store, but no-one seems to know.

Hi Chris,
1)User is clicking through the pages of the table control, marks some lines and hits submit button. After the submit, the table is back to page 1. Is there a way to keep the page that was last viewed?
declare a global variable gv_visiblefirstrow.
In EventHandler
when 'submit'.
gv_visiblefirstrow = request->get_form_field( 'your_tableview_id_visiblefirstrow' ).
In Layout:
Add the below line to code of your tableview
visibleFirstRow     = "<%= gv_visiblefirstrow %>"
2) Same situation. After the user has hit the submit button, I retrieve a list of all marked table lines. After I'm done, I'd like all lines to be unmarked. Does anyone know how to achieve that?
After you are done..just add the code..
Data: lv_total_rows type i.
      describe table itab lines lv_total_rows.
      cl_htmlb_manager=>check_tableview_all_rows(
      rowcount = lv_total_rows
      request = request
      id = 'tableview_id'
      check = ' '
As suggested by Raja,pls search the forum before posting a new thread.
Regards,
Anubhav

How would I bookmark specific clips to show in class using HBO Go on the iPad?

We need to bookmark certain clips to show to the class. We can get the movie "Apollo 13" with HBO go, but how do I bookmark the clips I need? I know the times to get to, just need to know how I would bookmark them for easy access.
Thanks in advance.

Don't use an inner join:
<cfquery name="getsignups" datasource="#application.dsn#">
select signups.courseTitle,signups.property,signups.calendardate,signups.com pany,signups.firstname,signups.lastname,signups.email,signups.phone,si gnups.userID,signups.signup_id,signups.rid,course_eval.userID,course_e val.id
from signups LEFT OUTER JOIN course_eval ON signups.userID = course_eval.userID
where signups.rid = #rid#
</cfquery>
<cfoutput> <cfloop query="getsignups"> <tr> <td>#rid# - #firstname# #lastname# | <a href="mailto:#email#">#email#</a></td><td>Ph: #phone#</td> <td width="24"><a href="showsignups.cfm?signup_id=#signup_id#&go=go" class="button">Remove</a></td> <cfif isdefined("id")> <td width="24"><a href="../../forms/surveys.cfm?userID=#userID#" class="button">Survey</a></td> </cfif> </tr> </cfloop> </cfoutput>
Use:
<cfif id neq "">
Message was edited by: Eddie Lotter (Typo)

Some scenes washed out/can't select specific clips to edit?

Basically, some parts of the video look like this:
I found out how to lower the brightness. It's not a perfect fix, but it works for me since I'm not using it for anything special. The problem is, when I don't know how to edit one or two particular clips without changing the rest of the video. Unless, someone has a better idea on how to fix this lighting problem.
IMOVIE '11 9.0.4

Am I missing something simple?
It's simple, but not at all obvious:
If you have Show Track Keyframes or Show Track Volume selected, you can't select or move your audio (unless you grab the video portion). The rationale is that, while adjusting clip keyframes/volume is relative to sequence time, adjusting track keyframes/volume is absolute to sequence time. This is a "save me from myself" kind of thing, where the assumption is that you're only adjusting track volume once your clips are in their final time positions in the sequence. By not being able to select the audio while you're adjusting track volume, you're prevented from accidentally moving your audio around whilst adjusting levels/keyframes. It does make sense, but it's not at all obvious what the solution is when you don't even know what the problem is!
Hope that helps...

Digitizing Whole Tape vs. Logging Specific Clips and Batch Digitizing Them

For the last couple of years I have always gone through each of my (HDV) tapes, logged the clips I thought I might use, and batch-digitized them.
Is there any reason I can't digitize whole tapes all at once and then create subclips? I do have the room on my media drive.
Thanks.

Is there any reason I can't digitize whole tapes all at once and then create subclips?
No reason at all.
How I capture depends on the nature of the project. For most script based projects, I usually only capture individual clips that I think I may use. For event type projects (seminars, meetings, etc), I log and then capture the entire recording as one clip.
-DH

I am trying to include a number of iTunes tracks to my iMovie project as background music. However, when I drag and drop the tracks into the grey areas between thumbnail pics, they seem to be locking into specific clips

How can I stop this from happening? I simply want to have a number of tracks playing one after the other as background music from the start to finish of my project.

What version of iMovie?
What Device?
Have tried to restart, soft reset your device?
What is the video audio source?
This forum is for iMovie iOS (ipads & iphones).
Are you referring to iMovie Mac?
If so I can get your post moved.

Clips Conforming to Project Properties - Sometimes

Having preset custom properties for a new Project, is there a way to have ALL clips added to that Project/Timeline (whether inserted, appended, dragged, whatever) automatically conform to those custom settings, in particular the frame rate?
I've spent the past few hours testing every subtle variation I can think to test, but the result is still that SOME clips get correctly converted and some don't -- but the exact SAME clip will get processed correctly in one Test Project, yet not in another, and I just can't determine a consistent reason why.
(I've added full workflow details below.)
Am I overlooking something obvious, or is this kind of baffling behavior -- wherein clips sometimes conform to specific Project Properties and sometimes don't (and the SAME clip gets processed differently in different Projects, each created with the SAME Property settings) -- just another "feature" of the new Final Cut?
Any suggestions appreciated!
Thanks,
John B.
Toronto
PROJECT SPECIFICS:
- Original media is AVCHD 1920x1080 files acquired on a Canon HF-10 camera at the "24p" setting, which a colleague refers to as "24f", as in "24-fake";
- the files are actually 29.97i with every fourth frame repeated, so after import, viewing them from the Event Browser one frame at a time, the pattern for every five frames is A-B-C-D-D, A-B-C-D-D, etc.
- So if I simply let the new Project's properties be determined by the first clip, it will become a 1920x1080 29.97i project;
- But if I custom set the new Project's frame rate to either 24p or 23.98p, and THEN add Clip1, an orange render bar (are we still supposed to call them that?) appears briefly overtop Clip1, after which -- SOMETIMES -- Clip1 now plays with that pulldown-simulating extra frame removed, in a smooth, true 24fps timeline.
- And that's exactly what I want to have happen, by default, with EVERY clip I add to this particular project; the trouble is: I can't make it happen consistently. Sometimes the render bar appears when I add the new clip; sometimes it doesn't. And sometimes even when it does appear, the end result just for that clip (and only on the timeline) is a horribly stuttery A-A-B-B-C-C-D-D-E-E.... cadence. (And that's after making sure ALL rendering is completely finished.) Other times -- grabbing the EXACT SAME CLIP from the Event Browser, but placing it in a new 24fps timeline -- the "conversion" works perfectly, and the clip on the timeline now plays smoothly at 24fps with no repeating frames anywhere.

24fps does not have pulldown. You're just changing the frame rate and Streamclip is reconforming it as best it can with frame blending. 24fps is not supported in FCE and should not be used.

Command to Re-Conform a specific clip?

Similar Messages

Maybe you are looking for