Command to transfer traffic from active firewall to standby

Hi there,
I am looking for a command to divert traffic to stanby firewall even though active firewall is up. is there a command like that. PLZ help. Thanks in advance.

Hi,
You can for example log to the standby unit and issue the command.
failover active
- Jouni

Similar Messages

  • UCCX 8.0 SNMP notification to report failover from active to the standby server?

    Does any know the UCCX 8.0 SNMP notification to report failover from active to the standby server?  (The specific notification.)
    ftp://ftp.cisco.com/pub/mibs/v2/CISCO-VOICE-APPS-MIB.my
    I see this in the MIB.
    cvaModuleStart NOTIFICATION-TYPE
      OBJECTS   { cvaAlarmSeverity, cvaModuleName }
      STATUS    current
      DESCRIPTION
            "A cvaModuleStart notification signifies that an
            application module or subsystem has successfully
            started and transitioned into in-service state. 
            This notification is working in conjunction with
            the cvaModuleStop notification to notify the start
            and stop status of a particular application module."
      ::= {ciscoVoiceAppsMIBNotifications 1}

    Attached are two files:
    cad-ecc-viewer.html
    This is a template HTML document which dictates how the pop up will look and what data fields are available.
    cad-ecc-viewer.vbs
    This is the Windows Scripting Host file which you run from a CDA workflow, and you pass it the values of the call data, it then launches an instance of IE and loads the above template.
    By default the code is setup to use the following data from the call, but can be modified to work with more, less, or different data:
    Customer Name
    Customer Status (like Premium, or Platinum)
    Customer Number (like an account number)
    Customer Phone Number
    So when you specify the VBS file to run in CDA you need to pass those variables in that order.
    The CDA should expect the VBS file on the root of C:\ by default, and the VBS file expects the HTML Template on the root of C:\ also.
    I have only tested this on UCCX 7x and IE 8x.  Use the code as a guide to your own solution, that suites your business requirements.
    EDIT: I see that this does not work on my Win7/IE9 system, so I will spend some time updating the code for Win7/IE9 and I'll let you know how it goes.
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

    Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

    Hi,
    first, I'm not Adobe's "slave" as you might to accuse me. Most of the posters here are users like me.
    I only can repeat that what I found in Adobe's help sites, as I wrote above. You are free to figure out the "real" truth and - the best would be - you may contact Adobe directly, here are - I'm sure you know them -  the links I would use: http://helpx.adobe.com/support.html  and http://helpx.adobe.com/contact.html.
    Hans-Günter

  • Can I transfer pics from my inactive i4s to my active i4s?

    Can I transfer pics from my inactive i4s to my active i4s?

    sharing its not possible i also tried same as u r tryng its not help me out

  • What's GPIB command can transfer state file to E5062A from external comtrol(PC)

    Deal All
    so far, I can use MMEM:TRAN? "D:A.STA" to read the state file on my PC. and now I have two questions.
    1. how to save this state file in my PC?
    2. what's GPIB command can transfer this state file to E5062A from PC?
    about question 2 : I was read E5061-90042.pdf, and read sample program of page 140, and try MMEM:TRAN this command. but still fail.
    please advance
    Best Regards
    Patch

    You could just save the read data straight to a text file.  That would be the simplest way.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • SQL firewall rule to restrict traffic from only one Azure PaaS website (cross-post from websites)

    (This has also been posted on the websites forum)
    Hi,
    I have been asked to configure the firewall on the SQL PaaS instance to only allow traffic from a specified PaaS website that is within the same subscription. I can't see any way to set a static internal IP for the website, is there a way to identify it
    for the purpose of the SQL Database firewall rule?
    Thanks,
    Karina

    You're right, KG! Sorry.
    This article mentions a reserved-IP:
    https://msdn.microsoft.com/en-us/library/azure/dn690120.aspx
    It specifically mentions your scenario:
    You want to ensure that outbound traffic from Azure uses a predictable IP address. You may have your firewall configured to allow only traffic from specific IP addresses. By reserving a VIP, you will know the source IP address and won’t
    have to update your firewall rules due to a VIP change. This is especially helpful if you want to configure your firewall before you create your cloud service.
    The only thing I'm not confident on would be if it works with Azure Websites - it does mention cloud services, though. If you have further questions, I can give a shot myself and see if I can get a working example.

  • SQL firewall rule to restrict traffic from only one Azure PaaS website

    Hi,
    I have been asked to configure the firewall on the SQL PaaS instance to only allow traffic from a specified PaaS website that is within the same subscription. I can't see any way to set a static internal IP for the website, is there a way to identify it
    for the purpose of the SQL Database firewall rule?
    Thanks,
    Karina

    Hi Karina,
    If you used Azure Vm, you could set ta static internal IP for your VM. And you can host your website on VM.https://msdn.microsoft.com/en-us/library/azure/dn630228.aspx
    But for Azure Website service, I think you may not set the internal IP. But I think you can try to add the website server into your allow rule list if you used the basic or standard mode website.
    BTW, I suggest you can post this issue on SQL Azure forum for more helps:
    https://social.msdn.microsoft.com/forums/azure/en-US/home?forum=ssdsgetstarted
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How do i transfer files from old ipad to new ipad if it has already been activated as new?

    I purchased a new ipad and need to transfer files from my old ipad.  However, it has already been set up as new and all support suggestions I have found have been for choosing the restore option in the set-up stage.  How do I do it now that it has been activated?

    It depends on if you even have a backup. If you had a backup, I don't suppose that you would have to ask how to restore from it.
    Did you backup your old iPad? If you so, did you backup with iTunes or iCloud? This explains how to backup and how to restore from a backup, but once again, if you don't have that backup any longer, this will not work.
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766

  • How do I transfer emails from a non-active superseded inbox to local files.

    I have changed servers and cancelled my old server (email service). I want to transfer all my old emails from my old inbox into local folders so I can delete the old account. I have a new account and a new inbox which is working fine. When I try to transfer emails from the old inbox, the software tries to logon to the old server - which no longer works - and won't let me transfer the emails. I can see and read the emails - so they are on my local computer. I don't want to lose all the old emails. I no longer have access to my old server.

    Imap emails are kept on the server.
    If you synchronized folders for offline use, then it would create an mbox file and keep a copy on your computer. When you connect with server, it updates this file so that the server and your copy are the same.
    As the server is no longer accesible, they will have removed all emails, so you do not want to connect to that server as it would wipe all your emails to match the server. So it is good that you cannot connect. It is also fortunate that it did not make a last connection to an empty server. For future reference it would be better to move IMAP mail account emails prior to stopping the account.
    It sounds like you synchronized emails, which explains why you can still see emails.
    Two options that I can think of:
    Go into 'offline mode' and then try to move the emails into Local Folders.
    Another option.
    Download the addon 'ImportExportTools', then in offline mode, use it to move the emails.
    https://freeshell.de//~kaosmos/mboximport-en.html

  • How to transfer user accounts from Active Directory to Open Directory

    Please help me , want to tranfer user accounts from Active Directory (Windows server 2012 ) to Open Directory (OS X server 10..2.9)

    Hi,
    Go to the advanced administration for the OSX Server:
    https://help.apple.com/advancedserveradmin/mac/3.1/#apd6D7FE39D-32AA-400C-91E1-5 0ABC15655C8
    This pretty easy way of connecting your server to the Windows server should give AD users access to OD services. That will be a good start.
    Read up on this as well:
    http://support.apple.com/kb/PH15469
    Do you want to import them all or just the Mac users?
    Goodluck!
    Jeffrey

  • RMAN duplicate target database for standby from active fails to create newname for system tablespace/datafile

    When executing 'duplicate target database for standby from active'  the system tablespace/datafile (datafile 1)  is not cloned.  All other datafiles clone successfully.  The RMAN process aborts with the following errors while attempting to clone the system tablespace/datafile.
    ORA-19558: error de-allocating device
    ORA-19557: device error, device type: DISK, device name:
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
    ORA-03135: connection lost contact
    Here are the details:
    Primary is 11.2.0.2 RAC database  on an Exadata platform
    Standby is 11.2.0.2 Single Instance database (same patch level as primary) on a Red Hat Linux box
    This is an ASM to ASM duplication.
    This is not unique to this database.  We tried another database and go the same behavior - all datafiles clone successfully with the exception of the system tablespace/datafile.
    We have traced the RMAN execution and it seems to fail when it is trying to assign a NEWNAME to the system tablespace/datafile.
    We even issued an explicit SET NEWNAME command but RMAN ignored it.
    We also shutdown the primary and started is up in mount mode thinking that something had ahold of the System Tablespace/datafile.
    We also opened up the network firewall to allow permit any,any traffic.
    We increased the max_server_processes
    and added TCP.NODELAY=yes to the sqlnet.ora file.
    There seems to be some artifact present in our Primary System tablespace/data file that is preventing it form being cloned.
    checked all alert files grid, asm,  and dbhome - no abnormal messages.
    We are in the process of restoring the database from a backup but we would prefer to get this working using the 'Active Database' methodology

    I successfully created the standby database using RMAN backup and recovery.
    I started the managed recovery.  Archive logs are being sent from the primary to the standby ( I can see them in ASM), but the standby is not applying them.
    I get the following messages in the standby alert log...
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    Tue Nov 26 16:19:58 2013
    Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
    Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
    Tue Nov 26 16:20:01 2013
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    Tue Nov 26 16:20:11 2013
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    Tue Nov 26 16:20:22 2013
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    Tue Nov 26 16:20:32 2013
    Fetching gap sequence in thread 2, gap sequence 154158-154257
    I don't see any MRP processes:
    select process,
    status,
        thread#,
        sequence#,
       block#,
      blocks
      7     from v$managed_standby;
    PROCESS   STATUS          THREAD#  SEQUENCE#     BLOCK#     BLOCKS
    ARCH      CLOSING               2     154363          1        132
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    ARCH      CONNECTED             0          0          0          0
    RFS       IDLE                  0          0          0          0
    RFS       IDLE                  1     145418        121          1
    RFS       IDLE                  0          0          0          0
    PROCESS   STATUS          THREAD#  SEQUENCE#     BLOCK#     BLOCKS
    RFS       IDLE                  0          0          0          0
    12 rows selected.
    SQL>  SELECT THREAD#, SEQUENCE#, APPLIED FROM V$ARCHIVED_LOG;
       THREAD#  SEQUENCE# APPLIED
             2     154356 NO
             2     154357 NO
             1     145411 NO
             2     154358 NO
             2     154360 NO
             2     154361 NO
             1     145414 NO
             1     145415 NO
             2     154362 NO
             2     154363 NO
             1     145416 NO
    11 rows selected.
    I do have the archive logs that cover sequences 154158-154257
    Crosschecked 38 objects
    Crosschecked 62 objects
    Finished implicit crosscheck backup at 26-NOV-13
    Starting implicit crosscheck copy at 26-NOV-13
    using channel ORA_DISK_1
    using channel ORA_DISK_2
    Crosschecked 2 objects
    archived log file name=+RECO_XORA/nmuasb00/archivelog/2013_11_26/thread_2_seq_154377.344.832521989 RECID=29 STAMP=832521990
    validation succeeded for archived log
    archived log file name=+RECO_XORA/nmuasb00/archivelog/2013_11_26/thread_2_seq_154378.346.832521991 RECID=31 STAMP=832521993
    Crosschecked 31 objects

  • Monitoring network traffic from large queries to client

    Hi, is there any way to monitor the volume from network traffic from the server to the client, the statistics SQL*net message to client and SQL*net message from client don't show a full picture.
    I have a query that sends several GB of data to a client but the SQL*net statistics done show anything like this, is there any way I can see the volume of traffic from the RDBMS statistics?
    Regards.

    Alan Wilson wrote:
    Hi, is there any way to monitor the volume from network traffic from the server to the client, the statistics SQL*net message to client and SQL*net message from client don't show a full picture.
    I have a query that sends several GB of data to a client but the SQL*net statistics done show anything like this, is there any way I can see the volume of traffic from the RDBMS statistics?
    Sounds like you're looking at the Wait events only - you need to check the instance (or session) activity - v$sysstat/v$sesstat for the following stats:
    NAME
    bytes sent via SQL*Net to client
    bytes received via SQL*Net from client
    SQL*Net roundtrips to/from clientIt's worth pointing out, by the way, that SQL*Net can do "compression" on the fly by comparing columns across rows of data sent, so the volumes you see in these stats may not match the volume you finally see arriing in the client code. ( http://jonathanlewis.wordpress.com/2010/05/07/sqlnet-compression/ )
    If you need to optimise the transfer rate, look at the SQL*Net configuration (at both ends) for the Session Data Unit (SDU) and the o/s transmit and receive buffers.
    Regards
    Jonathan Lewis

  • Block all incoming traffic and Active FTP

    Will setting the firewall to Block all incoming traffic break Active FTP Connections?
    The firewall will normally dynamically create exceptions for the Connection using the Application Layer Gateway, but will the profile override these?

    Hi TribleTrouble,
    Do you have any issue about FTP active mode?
    If the clients are part of your domain, push the FTP firewall rules via GPO to your clients allowing FTP inbound sockets
    netsh advfirewall firewall add rule name="File Transfer Program" protocol=TCP profile=domain Program=C:\Windows\System32\ftp.exe dir=in action=allow
    netsh advfirewall firewall add rule name="File Transfer Program" protocol=UDP profile=domain Program=C:\Windows\System32\ftp.exe dir=in action=allow
    For Windows 7, the entire networking stack was rewritten and several security measures were taken to further secure Windows.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Issue in configuring Standby Database from Active database in 11g by RMAN

    POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [oracle@oracle11g ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [oracle@oracle11gstby ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [oracle@oracle11g ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [oracle@oracle11gstby admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.
    Edited by: 895188 on Dec 21, 2012 5:50 PM
    Edited by: 895188 on Dec 21, 2012 6:09 PM
    Edited by: 895188 on Dec 21, 2012 6:22 PM

    Hello;
    Script has to be run from auxiliary.
    Great details, but what I don't see is how you connect in RMAN.
    Example
    Start RMAN
    $ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
    Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: RECOVER2 (DBID=3806912436)
    connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
    Generally for active duplication I start the future standby on a pfile NOMOUNT.
    Auxiliary Instance Initialization Parameters Needed :
    DB_NAME
    CONTROL_FILES
    DB_BLOCK_SIZE
    ( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
    Then start RMAN and finally run a single line duplication command.
    $ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
    RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
    mseberg

  • Issue in creating the standby database from Active database using RMAN

    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [oracle@oracle11g ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [oracle@oracle11gstby ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [oracle@oracle11g ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [oracle@oracle11gstby admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.

    Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN

Maybe you are looking for

  • Why the Sales Order is still being processed?

    Hi, This process is done: Sales Order (RE - Return) --> Return Delivery (Goods receipt) --> Billing Sold-to party wrongly entered in the Sales Order, so they wanted to close the Sales Order. They did Cancellation for Billing (VF11) and reversed the G

  • Missing font in all font menus?

    I've only recently updated to OSX and Freehand MX (I've been using Freehand 8 and 9). Everything works okay, but one of my company's key fonts does not appear in the menu. ITC Franklin Gothic Book is simply gone, although it shows up in Photoshop and

  • Wifi connection fluctuant

    My MacBook has a problem connecting to my router. When I'm very close to the router I've a perfect signal strength. As soon as I walk around the corner into the next room (door is open!) the connection is lost. After 10 meters (I have visual contact

  • Link error during fcompile

    Hi, I am getting this error during fcompile of a large (12MB) pgf file link: fatal error LNK1141: failure during build of exportes file error during compilation, aborting This is under Windows NT and MSVC compiler. MSVC Documetation says that this co

  • Is my iphone unlocked?????

    i went to the apple store yesterday and i got a replacment iphone 4 and the man who helped me out just gave me the phone without setting it up or anything. okay so when i went through the set up is asked me to pick a carrier it listed verizon sprint