Link error during fcompile

Hi,
I am getting this error during fcompile of a large (12MB) pgf file
link: fatal error LNK1141: failure during build of exportes file
error during compilation, aborting
This is under Windows NT and MSVC compiler. MSVC Documetation says that
this could be due
to insufficient memory. But we have 0.5Geg ram and I don't even see all
memory being utilized during compile.
Any clues?
--Shahzad

Similar Messages

Re: Link error during fcompile

Hi Jeanne:
I have already gone trough the procedure you have described but the
result is same.
When I invoke link command on all the *.obj files with some libraries
from forte and
MSVC/Lib I get the same Error. The command I am invoking is
C:\> link *.obj *.lib
Assuming that I am in the dir where all .obj files are and I have copied
all required .lib files in this dir. Other thing that I have also tried
this with different link flags and/or with exact flags from Forte log
file.
Thanks for your respons.
Any othe suggestions please?
--Shahzad
Jeanne Hesler wrote:
Shahzad,
Have you tried manually invoking the link command itself from the
command
line? I was able to do this successfully when having problems with
the
Borland compiler under 16-bit windows. It is not a long-term
solution,
because you obviously want fcompile to handle the entire task, but it
might
help you determine if it is a problem with the fcompile or the linker
itself.
I executed the fcompile from a DOS window in the ...codegen\myapp
directory. When the error occurred, I found the log file that is
created
from the fcompile, and determined the last command that was executed.
I
can't tell you the exact specifics here, because I have not had
problems
with fcompile using the MSVC compiler. But I am assuming that Forte
is
consistent about writing the compiler output to a log file. I could
then
copy the command line from the log file to the command line in the dos
window and execute it manually.
You have to be careful copying the command line, because there are a
lot of
flags, and they ARE case-sensitive. If you get the same error when
invoking the command manually, then you can assume that the problem is
with
the compiler itself, or as it was in my case, with the compiler
setup. If
the command is successful when you execute it manually, then you can
pursue
it as a problem with the fcompile.
One other thought -- you might make sure that you have plenty of extra
disk
space. Compilers like to write temporary files during the compile
process.
On a very large compile, you might need a lot of working space for
these
temporary files. I believe the MSVC compiler writes these files to
the
directory indicated by the environment variable TMP (not TEMP).
Hope this helps,
At 11:22 AM 10/17/97 -0400, you wrote:
Hi,
I am getting this error during fcompile of a large (12MB) pgffile
link: fatal error LNK1141: failure during build of exportes file
error during compilation, aborting
This is under Windows NT and MSVC compiler. MSVC Documetation saysthat
this could be due
to insufficient memory. But we have 0.5Geg ram and I don't even seeall
memory being utilized during compile.
Any clues?
--Shahzad
--Jeanne
============================================================
Jeanne Hesler [email protected]
============================================================

The way to handle this is to break down the fcompile. Here is the
process:
1. fcompile -nocompile -fm "(x:40000)"
this will produce the CPP and H files
2. fcompile -nogen -fm "(x:40000)"
this will link the files and produce the exe.
If there is an error then you will know exactly where its happening.
Hope this helps.
Kamran Amin
Technical Leader, Software Engineering
Oxford Health Plan
http://www.oxhp.com/
From: Chaudary M. Shahzad[SMTP:[email protected]]
Sent: Friday, October 17, 1997 7:05 PM
To: [email protected]
Subject: Re: Link error during fcompile
Bruce:
I have tried that I have even tried
fcompile -fm '(x:400000)'
It seems like its the Microsoft Compiler and/or Linker problem. There
have to be some flags for compiler or linker I can
set with fcomile so it allocate more memory for the MSVC linker.
Any more clues or help ????
--Shahzad
Bruce Lipson wrote:
Chaudary,
There are flags for setting the usage of memory by the fcompile
command.
fcompile -fm '(x:250000)'
where x:250000 sets the maximum amount of memory fcompile will use to
250k.
the default is 64k.
Get it a try.
Bruce Lipson
[email protected]
-----Original Message-----
From: Chaudary Shahzad [SMTP:[email protected]]
Sent: Friday, October 17, 1997 11:22 AM
To: [email protected]
Subject: Link error during fcompile
Hi,
I am getting this error during fcompile of a large (12MB) pgf
file
link: fatal error LNK1141: failure during build of exportes file
error during compilation, aborting
This is under Windows NT and MSVC compiler. MSVC Documetation says
that
this could be due
to insufficient memory. But we have 0.5Geg ram and I don't even see
all
memory being utilized during compile.
Any clues?
--Shahzad

Linker Error during compiling ODBC WinCE C++_Sample Project

I am devloping a ODBC application for PocketPC2003 using OLite 10g Release 10.3.0.2. before that i am understanding the sample application provided with Olite.
I followed all the instructions provided in ReadMe.txt file available before using VC++ sample. After making all the settings and compiling i am getting following linker errors as mentioned below.
Any solution for this problem at the earliest will be appreciated, i have tried link all the libraries provided with WinCE armv4.
Linker Error Messages:
Error     1     error LNK2019: unresolved external symbol SQLExecDirect referenced in function "public: virtual __cdecl CSQLResult::~CSQLResult(void)" (??1CSQLResult@@UAA@XZ)     dbaccess.obj
Error     2     error LNK2019: unresolved external symbol SQLFreeStmt referenced in function "public: virtual __cdecl CSQLResult::~CSQLResult(void)" (??1CSQLResult@@UAA@XZ)     dbaccess.obj
Error     3     error LNK2019: unresolved external symbol SQLGetData referenced in function "public: class CRowObj const * __cdecl CSQLResult::Fetch(int)" (?Fetch@CSQLResult@@QAAPBVCRowObj@@H@Z)     dbaccess.obj
Error     4     error LNK2019: unresolved external symbol SQLFetch referenced in function "public: class CRowObj const * __cdecl CSQLResult::Fetch(int)" (?Fetch@CSQLResult@@QAAPBVCRowObj@@H@Z)     dbaccess.obj
Error     5     error LNK2019: unresolved external symbol SQLFreeEnv referenced in function "public: void __cdecl COLiteDB::Disconnect(void)" (?Disconnect@COLiteDB@@QAAXXZ)     dbaccess.obj
Error     6     error LNK2019: unresolved external symbol SQLFreeConnect referenced in function "public: void __cdecl COLiteDB::Disconnect(void)" (?Disconnect@COLiteDB@@QAAXXZ)     dbaccess.obj
Error     7     error LNK2019: unresolved external symbol SQLDisconnect referenced in function "public: void __cdecl COLiteDB::Disconnect(void)" (?Disconnect@COLiteDB@@QAAXXZ)     dbaccess.obj
Error     8     error LNK2019: unresolved external symbol SQLConnect referenced in function "public: int __cdecl COLiteDB::Connect(void)" (?Connect@COLiteDB@@QAAHXZ)     dbaccess.obj
Error     9     error LNK2019: unresolved external symbol SQLAllocConnect referenced in function "public: int __cdecl COLiteDB::Connect(void)" (?Connect@COLiteDB@@QAAHXZ)     dbaccess.obj
Error     10     error LNK2019: unresolved external symbol SQLAllocEnv referenced in function "public: int __cdecl COLiteDB::Connect(void)" (?Connect@COLiteDB@@QAAHXZ)     dbaccess.obj
Error     11     error LNK2019: unresolved external symbol SQLError referenced in function "public: class CSQLResult * __cdecl COLiteDB::Execute(wchar_t const *)" (?Execute@COLiteDB@@QAAPAVCSQLResult@@PB_W@Z)     dbaccess.obj
Error     12     error LNK2019: unresolved external symbol SQLDescribeCol referenced in function "public: class CSQLResult * __cdecl COLiteDB::Execute(wchar_t const *)" (?Execute@COLiteDB@@QAAPAVCSQLResult@@PB_W@Z)     dbaccess.obj
Error     13     error LNK2019: unresolved external symbol SQLNumResultCols referenced in function "public: class CSQLResult * __cdecl COLiteDB::Execute(wchar_t const *)" (?Execute@COLiteDB@@QAAPAVCSQLResult@@PB_W@Z)     dbaccess.obj
Error     14     error LNK2019: unresolved external symbol SQLAllocStmt referenced in function "public: class CSQLResult * __cdecl COLiteDB::Execute(wchar_t const *)" (?Execute@COLiteDB@@QAAPAVCSQLResult@@PB_W@Z)     dbaccess.obj

Hi,
The OLITE forum (Database Mobile Server (inc. legacy Database Lite) would be a better place to post your issue. This forum deals with the ODBC driver that connects to a "normal" Oracle database.
Hope it helps,
Greg
Edited by: gdarling on Nov 12, 2008 8:31 AM

Linking errors during install on Linux Mandrake

When I installed oracle (8.1.7) on linux mandrake I got a series of errors during
the very last portion of the install involving a bunch of *.mk files.
The first error says:
Error invoking target relink of makefile
$ORACLE_HOME/precomp/lib/ins_precomp.mk
All the others are virtually identical. I'm still pretty new to linux so I avoided
recompiling the kernel. Aside from that I followed the install instructions to the
letter. If anyone knows whats going on I would very much appreciate a push in
the right direction.

Alright, I've tried using the most recent archboot (2011.02-2) a couple times. I selected GRUB2 x86_64 EFI. It asked me whether or not I wanted to convert my existing MBR to GPT. When I say no, it says installation was successful, when I say yes, it drops me into parted, so I just quit. My GPT should be fine as is.
My issue is that now, in rEFIt, I only get OS X and Legacy OS options. Legacy just freezes my computer. The legacy option has been there since I last tried to install, though I've tried to get rid of it a few different ways.
Should I choose a different bootloader option? Can I use the cd to boot in and fix it manually? if possible, I'd like to keep using rEFIt.

Linker error during TestStand deployment

Using Version - LabVIEW 2014 and TestStand 2014
Test Stand deployment failed so I am trying to narrow down the issue.
Note:
1. Create Installer option is not selected
2. Everything has been mass compiled in LabVIEW 2014
Step 1 -
1. Selected Folder A which has around 70 LabVIEW controls
2. Build is successful
Step 2 -
1. Selected One single VI from Folder B
2. Build Successful
Step 3 -
1. Selected that same VI from Folder B and Selected Folder A (combining step 1 and 2)
2. Build Fail
"LabVIEW returned a linker error but did not return any missing VIs. This can mean that the missing files are RC files or other similar dependencies. Mass compile your top-level files and resolve the errors reported. If the problem persists contact National Instruments for support."
Other than "Enable SSE2 Optimization" none of the options are selected from LabVIEW VI Options.
Any idea?
Thanks,
VS

This may be useful:
http://digital.ni.com/public.nsf/allkb/19F78E0B290BFA63862574F8005A9303

Link error during install of O9i Application server

Hi there.
I have a problem when installing Oracle 9i Application Server rel. 1.0.2.2.0 on SuSE 7.3.
During installation phase "Linking Oracle 9i Application Server rel. 1.0.2.2.0", I get: "Error invoking target install of makefile /
opt/oracle/product/9.0.1/icache/lib/ins_icache.mk"
The make.log states:
building Oracle8i Cache Management Engine
gcc -o /opt/oracle/product/9.0.1/bin/wtcme -L/opt/oracle/product/9.0.1/icache/lib/ -L/opt/oracle/product/9.0.1/lib/ /opt/oracle/pro
duct/9.0.1/icache/lib/wtemain.o /opt/oracle/product/9.0.1/icache/lib/libicache.a /opt/oracle/product/9.0.1/lib/libwtc8.a /opt/oracle
/product/9.0.1/icache/lib/libxml8.a \
-lclntsh /opt/oracle/product/9.0.1/rdbms/lib/kpuadef.o `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8
-lnl8 -lnro8 `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneri
c8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -ln
ro8 `cat /opt/oracle/product/9.0.1/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrac
e8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `ca
t /opt/oracle/product/9.0.1/lib/sysliblist` -ldl -lm \
-lpthread -lc
gcc: /opt/oracle/product/9.0.1/rdbms/lib/kpuadef.o: No such file or directory
make: *** [opt/oracle/product/9.0.1/bin/wtcme] Error 1
I had a similar problem when installing the database server software. This was fixed by editing the LD_SELF_CONTAINED parameter in
genclntsh. This, however, does not help in this case.
Kind regards,
Roald Andresen

Hi Melchor,
Please follow SAP Note 1618816 - Permanent or Temporary License Already Exists In Systemcopy
If possible please share files saplikey.log, dev_slic
Regards,
Gaurav

'make /link ' errors during Oracle 11G install on Oracle Linux 5

tail /u01/app/oraInventory/logs/installActions2007-10-12_11-30-12AM.log
INFO: genclntsh: Failed to link libclntsh.so.11.1
INFO: make: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/product/11.1.0/oradb1/rdbms/lib/ins_rdbms.mk'. See '/u01/app/oraInventory/logs/installActions2007-10-12_11-30-12AM.log' for details.
Exception Severity: 1
Any helpful hint would be highly appreciated...Ramesh

Hi, Ramesh
Please refer to
Error in invoking target 'client_sharedlib' of makefile
Could you have the same condition ?
Regards
Jason

Getting Linker errors while porting InDesign CC plugin code to InDesign CC 2014

Hello,
I am getting following linker errors during porting of plugin code from InDesign CC to InDesign CC 2014
> PlugInStatics.obj : error LNK2019: unresolved external symbol "class boost::system::error_category const & __cdecl boost::system::generic_category(void)" (?generic_category@system@boost@@YAAEBVerror_category@12@XZ) referenced in function "void __cdecl boost::system::`dynamic initializer for 'posix_category''(void)" (??__Eposix_category@system@boost@@YAXXZ)
> PlugInStatics.obj : error LNK2019: unresolved external symbol "class boost::system::error_category const & __cdecl boost::system::system_category(void)" (?system_category@system@boost@@YAAEBVerror_category@12@XZ) referenced in function "void __cdecl boost::system::`dynamic initializer for 'native_ecat''(void)" (??__Enative_ecat@system@boost@@YAXXZ)
I am using following environment :
OS : Windows 7 SP1 (64bit)
Visual Studio : VS 2013 with platform tool set = Visual Studio 2010 (v100)
InDesign SDK : InDesign CC 2014 plugin SDK (070)
Boost Libraries : 1.55
I have added external boost library paths in visual studio -> Linker properties -> Additional Library paths, still above linker errors persists, can someone help ?
Thanks,
-Harsh.

Hello Bartek,
Your answer resolved similar linker errors I faced while porting InDesign plug-ins from CC to CC 2014.
I added the macro - BOOST_SYSTEM_NO_DEPRECATED to the Preprocessor Definitions in VS 2012 SP4 and the build succeeded.
The second option of adding the macros - BOOST_ALL_DYN_LINK;BOOST_REGEX_USE_CPP_LOCALE;BOOST_REGEX_RECURSIVE;BOOST_HAS_ICU=1;BOOST_ FILESYSTEM_VERSION=3;BOOST_CHRONO_HEADER_ONLY;BOOST_SIGNALS_NO_DEPRECATION_WARNING; did not work for me.
Can you explain why this linker error showed up? And how the macro solved it?
Thanks,
Vijayasri

Symbolic link error when exporting during heterogeneous system copy

My enviroment is ECC6.0/Oracle 10.2.0.2/SUN Solaris 10 . I'm performing heterogeneous system copy to Oracle 10.2.0.2/AIX 6.1 enviroment.
I've succesfully exported & imported two systems ie DEV & Solutin Manager , but PRD system has an OS problem with symbolic links ie Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS
I want to export both ABAP & JAVA stack but only the java stack is getting picked.
Below is part of the resultng sapinst.log
Thanks
INFO 2011-09-05 10:44:30.573
Execute step verifyJavaHome of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
INFO[E] 2011-09-05 10:44:33.851
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:44:33.851
FSL-02061 Link /._ is invalid: Unable to link a link to itself.
INFO 2011-09-05 10:44:46.118
Execution of the command "/usr/j2sdk1.4.2_09/bin/java -classpath /tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Mon Sep 05 10:44:45 EAT 2011
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=/usr/j2sdk1.4.2_09/jre/lib/sparc
java.vm.version=1.4.2_09-b05
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=\:
java.vm.name=Java HotSpot(TM) Client VM
file.encoding.pkg=sun.io
user.country=US
sun.os.patch.level=unknown
java.vm.specification.name=Java Virtual Machine Specification
user.dir=/oracle/PRD/INSTDIR/sapinst_dir
java.runtime.version=1.4.2_09-b05
java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment
java.endorsed.dirs=/usr/j2sdk1.4.2_09/jre/lib/endorsed
os.arch=sparc
java.io.tmpdir=/var/tmp/
line.separator=\n
java.vm.specification.vendor=Sun Microsystems Inc.
os.name=SunOS
sun.java2d.fontpath=
java.library.path=/usr/j2sdk1.4.2_09/jre/lib/sparc/client\:/usr/j2sdk1.4.2_09/jre/lib/sparc\:/usr/j2sdk1.4.2_09/jre/../lib/sparc\:/tmp/sapinst_exe.29247.1315208256\:/usr/openwin/lib\:/usr/lib
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.FileSystemPreferencesFactory
os.version=5.10
user.home=/
user.timezone=Africa/Nairobi
java.awt.printerjob=sun.print.PSPrinterJob
file.encoding=ISO8859-1
java.specification.version=1.4
java.class.path=/tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar
user.name=root
java.vm.specification.version=1.0
java.home=/usr/j2sdk1.4.2_09/jre
sun.arch.data.model=32
user.language=en
java.specification.vendor=Sun Microsystems Inc.
java.vm.info=mixed mode
java.version=1.4.2_09
java.ext.dirs=/usr/j2sdk1.4.2_09/jre/lib/ext
sun.boot.class.path=/usr/j2sdk1.4.2_09/jre/lib/rt.jar\:/usr/j2sdk1.4.2_09/jre/lib/i18n.jar\:/usr/j2sdk1.4.2_09/jre/lib/sunrsasign.jar\:/usr/j2sdk1.4.2_09/jre/lib/jsse.jar\:/usr/j2sdk1.4.2_09/jre/lib/jce.jar\:/usr/j2sdk1.4.2_09/jre/lib/charsets.jar\:/usr/j2sdk1.4.2_09/jre/classes
java.vendor=Sun Microsystems Inc.
file.separator=/
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeBig
sun.cpu.endian=big
sun.cpu.isalist=sparcv9vis2 sparcv9vis sparcv9 sparcv8plusvis2 sparcv8plusvis sparcv8plus sparcv8 sparcv8-fsmuld sparcv7 sparc
INFO 2011-09-05 10:44:47.076
Execution of the command "/usr/j2sdk1.4.2_09/bin/java -classpath /tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar:/tmp/sapinst_exe.29247.1315208256/JAR/sapxmltoolkit.jar -d64 com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2011-09-05 10:44:47.572
Execute step verifyPolicy of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
INFO 2011-09-05 10:44:47.715
Execute step setNWOption of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
WARNING 2011-09-05 10:44:47.944
Could not determine a valid JAVA_HOME directory from the environment.
INFO 2011-09-05 10:44:48.86
Execute step assignUsersToSapinstGroup of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:48.890
Account sapinst already exists.
INFO 2011-09-05 10:44:48.894
Account prdadm already exists.
INFO 2011-09-05 10:44:48.917
Account oraprd already exists.
INFO 2011-09-05 10:44:49.73
Execute step useDatabaseMethod of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.217
Execute step setDatabaseMethodOra of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.341
Execute step setDatabaseMethodDB6 of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.480
Execute step mainExportParameters of component |NW_Export|ind|ind|ind|ind|0|0
INFO[E] 2011-09-05 10:44:52.251
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:44:52.252
FSL-02061 Link /._ is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.760
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/cntrl), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.761
FSL-02061 Link /oracle/PRD/cntrl is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.762
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.762
FSL-02061 Link /oracle/PRD/._ is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.763
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/sdubhibq), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.764
FSL-02061 Link /oracle/PRD/sdubhibq is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.765
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/sduccayx), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.765
FSL-02061 Link /oracle/PRD/sduccayx is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.766
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/inventory), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.767
FSL-02061 Link /oracle/PRD/inventory is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.768
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/OPatch), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.768
FSL-02061 Link /oracle/PRD/OPatch is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.769
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/assistants), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.770
FSL-02061 Link /oracle/PRD/assistants is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.771
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/bin), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.772
FSL-02061 Link /oracle/PRD/bin is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.773
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/clone), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.773
FSL-02061 Link /oracle/PRD/clone is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.774
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/crs), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.775
FSL-02061 Link /oracle/PRD/crs is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.776
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/css), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.777
FSL-02061 Link /oracle/PRD/css is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.778
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/ctx), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.778
FSL-02061 Link /oracle/PRD/ctx is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.779
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/dbs), line (346) in file (syuxclink.cpp).

Hi,
In PRD system, u might have craeted many symbolic links in /oracle/PRD fileystem . This should be avoided. Symbolic link should not be created in /oracle/PRD ...
Please check why symbolic links are created and get help from System Operation team . Please becareful to unlink symbolic links that are created by non-SAP. Make sure to perform full offline backup .
Please get the help from Unix System Operation team. Also it does not makes any sense to increase value of Unix parameter for maximum symbolic links.
Regards
APR

Link SAP PI 7.3 to SolMan 7.1 - error during managed system configuration

All,
I installed my diagnostics agent twice with different options:
- Direct P4 connection via Java EE Dispatcher Node with port 5xx04
- P4 connection via SCS message server with port 81xx
In both cases I get an error during the managed system configuration of SAP PI 7.3: Remote error : Connection to P4 port of managed system failed.
I'm a bit confused with the step Enter System Parameters. In the Java parameters section, I can only enter port 39xx. if not, I get an error.
Also, I marked and unmarked the option concerning the ABAP user store, but the error persists.
Please advice.
Thanks a lot.

Hi Allam,
I checked the KBA and I think now, I have the correct HTTP port.
The error I now get is S:CL_DIAGSTP_MESSAGE:483
When I take the next step, Configure Automatically, I get this error during the Byte Code Adapter Installation phase when I open the Java URL stated in the navigation column:
DIAG_WILY_MSG:157:S - com.sap.smdagent.vmmanager.VMManagerP4Exception: com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException: Access is denied to SAP System sid: check the connection credentials.More details about the error in agent 'sappi' log file (SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Error during authentication. For more information see the remote server traces.
Any idea?
Thanks.

Error during linking a C file generated by Pro* C/C++

The following error occured while linking SQL-CON.EXE
can anyone please give out reason and solution for this problem.
'Linker Error : Undefined symbol _sqlcxt in module SQL-CON.c '
SQL-CON.c is a simple 'C' file which is generated by
precompiling SQL-CON.PC with Proc precompiler.
The SQL-CON.PC is used to connect Oracle database by taking
UserId an Password from the Oracle Client.
SQL-CON.PC
#include <stdio.h>
//#include <conio.h>
#include <ctype.h>
EXEC SQL BEGIN DECLARE SECTION;
VARCHAR uid[20];
VARCHAR pwd[20];
EXEC SQL END DECLARE SECTION;
EXEC SQL INCLUDE SQLCA;
main()
printf("Enter user name");
scanf("%s",uid.arr);
printf("Enter password");
scanf("%s",pwd.arr);
uid.len = strlen(uid.arr);
pwd.len = strlen(pwd.arr);
EXEC SQL CONNECT :uid IDENTIFIED BY :pwd;
printf("Connected to Oracle \n");
printf("Exiting Oracle with Success. \n");

Hi Supratik,
Please refer to these two links:
Send email with 1 excel file and multiple sheet
How to Convert file to excel and send it via email
Hope this will resolve your issue.

Link error(ins_ctx.mk) during installation oracle DB(11.2.0.2)

Hi,
While I am trying to install Oracle software on RAC setup.I am getting following linking error message at OUI. If I ignore the massage and clink on "continue" then database software is installed successfully.
Configuration detail.
1. OEL 5.4 (2 Nodes)
2. ASM
3. Clusterware 11.2.0.2
4. Installed RPM details checked from following link and looking fine.
http://download.oracle.com/docs/cd/E11882_01/install.112/e16769/toc.htm#BHCGAEJA
After investigated the issue I found following error message in make.log
/usr/bin/make -f ins_ctx.mk install ORACLE_HOME=/u01/app/oracle/product/11.2.0.2/dbhome_1/gcc -o ctxload -m32 -L/u01/app/oracle/product/11.2.0.2/dbhome_1/ctx/lib/ -L/u01/app/oracle/product/11.2.0.2/dbhome_1/lib/ -L/u01/app/oracle/product/11.2.0.2/dbhome_1/lib/stubs/ -L/u01/app/oracle/product/11.2.0.2/dbhome_1/lib/ -lirc -lipgo /u01/app/oracle/product/11.2.0.2/dbhome_1/ctx/lib/sdrz.o -lctxs11 -lctx11 -lctxs11 -lzx11 -lgx11 -lctx11 -lzx11 -lgx11 -lclntsh `cat /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/ldflags` -lncrypt11 -lnsgr11 -lnzjs11 -ln11 -lnl11 -lnro11 `cat /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/ldflags` -lncrypt11 -lnsgr11 -lnzjs11 -ln11 -lnl11 -lnnz11 -lzt11 -lztkg11 -lclient11 -lnnetd11 -lvsn11 -lcommon11 -lgeneric11 -lmm -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11 -lcore11 -lnls11 `cat /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/ldflags` -lncrypt11 -lnsgr11 -lnzjs11 -ln11 -lnl11 -lnro11 `cat /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/ldflags` -lncrypt11 -lnsgr11 -lnzjs11 -ln11 -lnl11 -lclient11 -lnnetd11 -lvsn11 -lcommon11 -lgeneric11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11 -lcore11 -lnls11 -lclient11 -lnnetd11 -lvsn11 -lcommon11 -lgeneric11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11 -lcore11 -lnls11 `cat /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/sysliblist` -Wl,-rpath,/u01/app/oracle/product/11.2.0.2/dbhome_1/lib -lm `cat /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/sysliblist` -ldl -lm -L/u01/app/oracle/product/11.2.0.2/dbhome_1/lib
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/11.2.0.2/dbhome_1/lib//libirc.a when searching for -lirc
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/11.2.0.2/dbhome_1/lib//libirc.a when searching for -lirc
/usr/bin/ld: skipping incompatible /u01/app/oracle/product/11.2.0.2/dbhome_1/lib/libirc.a when searching for -lirc
/usr/bin/ld: cannot find -lirc
collect2: ld returned 1 exit status
make: *** [ctxload] Error 1
Kindly suggest what can be done to resolve the issue.
Thanks-
Rajdeep

Hi,
I have 64-bit machine on which OEL 5.4 O/S os installed.I used correct version of Oracle database (11.2.0.2) software to install.
Please refer the output of versions are used.
uname -a
Linux Node-01 2.6.18-164.el5 #1 SMP Thu Sep 3 04:15:13 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
Following are the database software setup used for installation.
p10098816_112020_Linux-x86-64_1of7.zip
p10098816_112020_Linux-x86-64_2of7.zip
For any doubt of version, I used same setup to install database software version (11.2.0.1) and succeed in that.But when tried for 11.2.0.2 installation on same setup then failed. I feel this is some other issue.
Thanks-
Rajdeep

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

"A technical error during invocation : Could not invoke service reference" Error message while calling a service from BPM

Hi Experts,
We are facing a issue while calling a Automated activity from BPM process, the process gets suspended and the BPM logs says "Process XYZ suspended, A technical error during invocation: Could not invoke service reference name fdhueoegghejietyhsjk6886 Component name ABC " We have already checked the mapped service reference and provider system. Gone through the below link, but no help.
http://http://wiki.scn.sap.com/wiki/display/TechTSG/Sending+a+message+from+SAP+NetWeaver+BPM+process+to+PI+fails+via+automated+activity?original_fqdn=wiki.sdn.sap.com
Any pointers or suggestions to fix up this issue will be highly appreciated. Thanks in advance.
Regards,
Mohit Jaju

The details/ID in NWDS Service Reference must exactly match the SOA configuration. Sometimes it's possible you have changed the reference or the group itself and something changed to become mismatched.
It's possible they don't match - but the SG itself will show green in NWA since the service exists and responds on the target system. Does the ID listed in the error match what is shown in the NWDS project?
regards, Nick

Error during database connection to the database : MS SQL Server 2008 R2

Hi All,
I am working with ABAP Proxy to Rec JDBC( Integrating XI with MS SQL Server 2008 R2). I am using SAP PI 7.0
I am getting error in RWB at communication channel monitoring :
Error during database connection to the database URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST' using the JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST': SAPClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver'
I have given Connection details at Rec JDBC Communication channel as :
JDBC Driver as : com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection : jdbc:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST.
Please help me in this regard. I really appreciate your valuable information and time.
Thanks and Regards,
Ayub.
Edited by: Ayubsajjid on Feb 15, 2012 8:49 AM

Hi All,
Thanks for all your valuable inputs on my question...
As per all your inputs, we have to install/Deploy the below required jar files in the aii_af_jmsproviderlib.sda file
ojdbc14.jar
msbase.jar
mssqlserver.jar
msutil.jar
Can you please tell me from where we will exact this .jar file, bcoz we have search lotzz but we helpless.
We install from this link http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21599--> we download sqljdbc_3.0.1301.101_enu file >sqljdbc_3.0>enu-->in that I find sqljdbc.jar and sqljdbc4.jar files only . I cant above said .jar files.
Please help me.
Regards,
Ayub.

Link error during fcompile

Similar Messages

Maybe you are looking for