Command Window control
Hi, I was wondering if there was a way to control whether or not input appears in the command (MS-DOS) window or not. For example, if I have a program that does something like this:
Please enter a Sentence.
I am going to the store. presses enter
Is there a way to control whether or not that sentence shows up in the command window?
For example, if I have a program that does something like this:If by "does" you mean the program prints the prompt on System.out
and gets the input from System.in then your choices are pretty minimal.
(Being able to use the console effectively is a long standing bug/RFE
with Java).
But check out Console's readPassword() method in 1.6 which "Reads
a password or passphrase from the console with echoing disabled".
Similar Messages
-
Returning control from your program to command window
When I run my program using -
java testIt take contol of the command window and the prompt doesn't reappear untill I close the program (it has a gui), does anyone know any way I can run my program and keep the prompt on the screen?
Thanks.Windows: javaw test (I think)
Unix: java test & -
Why it automatically recover current redo log in RMAN command window?
Firstly, I restore controlfile and datafiles from a backupset.
Then when I recover database in RMAN command window like below:
RMAN> recover database;
Starting recover at 15-AUG-13
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
starting media recovery
archive log thread 1 sequence 9 is already on disk as file /u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_9_90sd0slz_.arc
archive log thread 1 sequence 10 is already on disk as file
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_10_90sd0tsb_.arc
archive log thread 1 sequence 11 is already on disk as file
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_11_90sd110b_.arc
archive log thread 1 sequence 12 is already on disk as file
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_12_90sd2ksr_.arc
archive log thread 1 sequence 13 is already on disk as file
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_13_90sd2mc6_.arc
archive log thread 1 sequence 14 is already on disk as file
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_14_90sd2qrm_.arc
archive log thread 1 sequence 15 is already on disk as file
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_15_90sd2s0w_.arc
archive log thread 1 sequence 16 is already on disk as file /u01/app/oracle/oradata/lonion/redo03.log
archive log filename=/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_9_90sd0slz_.arc thread=1 sequence=9
archive log filename=/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_10_90sd0tsb_.arc thread=1 sequence=10
archive log filename=/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_11_90sd110b_.arc thread=1 sequence=11
archive log filename=/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_12_90sd2ksr_.arc thread=1 sequence=12
archive log filename=/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_13_90sd2mc6_.arc thread=1 sequence=13
archive log filename=/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_14_90sd2qrm_.arc thread=1 sequence=14
archive log filename=/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_15_90sd2s0w_.arc thread=1 sequence=15
archive log filename=/u01/app/oracle/oradata/lonion/redo03.log thread=1 sequence=16
media recovery complete, elapsed time: 00:00:04
Finished recover at 15-AUG-13
RMAN>
But, when I recover database in SQL*Plus command window like below:
[oracle@lonion ~]$ uniread sqlplus /nolog
[uniread] Loaded history (2178 lines)
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Aug 15 19:25:38 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba
Connected.
SQL>
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile;
ORA-00279: change 2147842454 generated at 08/15/2013 18:34:28 needed for thread
1
ORA-00289: suggestion :
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_9_%u_.a
rc
ORA-00280: change 2147842454 for thread 1 is in sequence #9
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
auto
ORA-00279: change 2147842651 generated at 08/15/2013 18:40:25 needed for thread
1
ORA-00289: suggestion :
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_10_%u_.
arc
ORA-00280: change 2147842651 for thread 1 is in sequence #10
ORA-00278: log file
'/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_9_90sd
0slz_.arc' no longer needed for this recovery
ORA-00279: change 2147842653 generated at 08/15/2013 18:40:26 needed for thread
1
ORA-00289: suggestion :
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_11_%u_.
arc
ORA-00280: change 2147842653 for thread 1 is in sequence #11
ORA-00278: log file
'/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_10_90s
d0tsb_.arc' no longer needed for this recovery
ORA-00279: change 2147842656 generated at 08/15/2013 18:40:32 needed for thread
1
ORA-00289: suggestion :
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_12_%u_.
arc
ORA-00280: change 2147842656 for thread 1 is in sequence #12
ORA-00278: log file
'/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_11_90s
d110b_.arc' no longer needed for this recovery
ORA-00279: change 2147842684 generated at 08/15/2013 18:41:21 needed for thread
1
ORA-00289: suggestion :
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_13_%u_.
arc
ORA-00280: change 2147842684 for thread 1 is in sequence #13
ORA-00278: log file
'/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_12_90s
d2ksr_.arc' no longer needed for this recovery
ORA-00279: change 2147842686 generated at 08/15/2013 18:41:23 needed for thread
1
ORA-00289: suggestion :
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_14_%u_.
arc
ORA-00280: change 2147842686 for thread 1 is in sequence #14
ORA-00278: log file
'/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_13_90s
d2mc6_.arc' no longer needed for this recovery
ORA-00279: change 2147842689 generated at 08/15/2013 18:41:27 needed for thread
1
ORA-00289: suggestion :
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_15_%u_.
arc
ORA-00280: change 2147842689 for thread 1 is in sequence #15
ORA-00278: log file
'/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_14_90s
d2qrm_.arc' no longer needed for this recovery
ORA-00279: change 2147842691 generated at 08/15/2013 18:41:28 needed for thread
1
ORA-00289: suggestion :
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_16_%u_.
arc
ORA-00280: change 2147842691 for thread 1 is in sequence #16
ORA-00278: log file
'/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_15_90s
g0or9_.arc' no longer needed for this recovery
ORA-00279: change 2147842986 generated at 08/15/2013 19:14:29 needed for thread
1
ORA-00289: suggestion :
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_17_%u_.
arc
ORA-00280: change 2147842986 for thread 1 is in sequence #17
ORA-00278: log file
'/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_16_90s
g0os5_.arc' no longer needed for this recovery
ORA-00308: cannot open archived log
'/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_17_%u_
.arc'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
SQL> recover database using backup controlfile;
ORA-00279: change 2147842986 generated at 08/15/2013 19:14:29 needed for thread
1
ORA-00289: suggestion :
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_08_15/o1_mf_1_17_%u_.
arc
ORA-00280: change 2147842986 for thread 1 is in sequence #17
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/u01/app/oracle/oradata/lonion/redo01.log ---- Yon see, proceeding this process, it can't automatically apply the current redo log.
Log applied.
Media recovery complete.
SQL>
Question Coming:
Now, my question is that 「Why it automatically recover current redo log in RMAN command window but not in SQL*Plus」?
BTW: Please pay attention to the red font.It also seems not work.
SQL> recover automatic database using backup controlfile;
ORA-00279: change 2148632889 generated at 09/26/2013 12:45:22 needed for thread
1
ORA-00289: suggestion :
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_09_26/o1_mf_1_48_%u_.
arc
ORA-00280: change 2148632889 for thread 1 is in sequence #48
ORA-00278: log file
'/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_09_26/o1_mf_1_48_%u_
.arc' no longer needed for this recovery
ORA-00308: cannot open archived log
'/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_09_26/o1_mf_1_48_%u_
.arc'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
auto
ORA-00308: cannot open archived log
'/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_09_26/o1_mf_1_48_%u_
.arc'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-00308: cannot open archived log
'/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_09_26/o1_mf_1_48_%u_
.arc'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file
or directory
Additional information: 3
SQL>
It must specify the redo log.
SQL> recover database using backup controlfile;
ORA-00279: change 2148632889 generated at 09/26/2013 12:45:22 needed for thread
1
ORA-00289: suggestion :
/u01/app/oracle/flash_recovery_area/LONION/archivelog/2013_09_26/o1_mf_1_48_%u_.
arc
ORA-00280: change 2148632889 for thread 1 is in sequence #48
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/u01/app/oracle/oradata/lonion/redo02.log
Log applied.
Media recovery complete.
SQL> -
Sqlagent90.exe keeps running in a command window
HELP!, This is annoying and beyond belief. I installed SqlServer Developer edition without any problem than I installed SqlServer Express and now whenever I boot my PC, I have a command window that appear with nothing in it and the following title:
"C:\Program Files\Microsoft SQL Server\MSSQL.3\MSSQL\Binn\SQLAGENT90.EXE"
Now if I go to the Task Manager and kill the SQLAGENT90.EXE process, it goes away for a second than comeback with the nice command windows.
Any idea what's wrong and how I can get rid of it?
Bye the way, everything else seems to be working fine with the application.
Thanks,
Claude.Claude,
Some how the service was marked as allowed to interact with the desktop. This is not the default configuration and there is no need for it, so I'm not sure how you ended up in this state. To clean this us launch the service control manager (Control Panel -> Administrative Tools -> Services), scroll down to the Agent service (SQL Server Agent (instance name)) and double click it to bring up the Properties page. On the Properties page select the Log On tab. The service is probably running as Local System, below this is a check box labeled "Allow service to interact with desktop", uncheck that box, press the Apply button, go to the General tab and stop and start the service. You should no longer see the cmd window pop up. Click OK to dismiss the Properties page.
Cheers,
Dan -
Xcopy without a command window....
Hi,
I need to download from the network a folder, not always the same folder as this will hopefully be pragmatically controlled, along with its sub folders, if present.
As far as I can see the best option is xcopy, with its switches, or is there another option?
Err = system ("xcopy /S/Q/Y/R/K \\\\NW_Drive\\Test_Fol\\TestDataSource\\Rel\\TestCode\\*.* C:\\Test_Loc\\test\\SRM\\");
If it is to be xcopy can it be done without a command window or at least a small or minimized command window?
Thanks for the help
Simon
Solved!
Go to Solution.You may want to explore LaunceExecutableEx possibilities, especially for its ability to hide the launched program window. Keep in mind that this is an asynchronous call, so if you want to survey the process you need to save the handle returned by the command and periodically check its state with ExecutableHasTerminated () function.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
Hide visible command window when running cscript.exe
I'm using vbs wrappers when I'm installing applications with MDT because they offer me better control and logging capability. Currently when task sequencer executes application install with cscript.exe there is this visible command window. Is it possible
to completely hide it without big modifications to MDT?If you are using ZTIUtility.vbs then I recommend:
oUtility.RunWithConsoleLoggingAndHidden "cmd.exe /c echo Hello World!"
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com -
Cannot change command and control button
in the past I've been able to switch the command and control buttons from system preferences. I recently connected a new Microsoft keyboard to my mac mini, and when I change the command and control button the same way I did before, it has no affect. The command and control keys have their default action. Is there a way to over ride this?
I did on Lenono brand windows keyboard and it works, but when I try a Microsoft brand windows keyboard, it doesnt work.
-
Results of Query Wrap Within DOS Command Window.
Greetings,
I am using SQL*PLUS within the DOS command window.
The results of my query is wrapping down the page, instead of using the entire width of the window.
I have set the windows mode command, before going into SQL*PLUS:
MODE CON: COLS=100 LINES=40
So, I was hoping to have Oracle use all 100 columns, when displaying the answer set.
Regards,
DaveHi Dave,
Size of lines, columns and pages are controlled by SQL*Plus system variables
For width of lines
SET LINES[IZE] which defaults to 80
For number of lines per "page"
SET PAGES[IZE] which defaults to 14
To control formatting, including width of indicidual columns you have COL[UMN], e.g:
COLUMN your_column FORMAT a20
For more settings:
http://download.oracle.com/docs/cd/E11882_01/server.112/e16604/ch_twelve040.htm
If you want certain settings each time you open SQL*Plus, you can add those to your glogin.sql
Regards
Peter -
Access to Previously-saved SQL in SQL Commands Window
Hi all,
If I've saved some SQL in the SQL Commands window, shouldn't that be available to other developers when they click on the Saved SQL tab? I saved a sample query and one of my other developers doesn't see it. I don't see any setting available in the developer account that controls whether or not the account can see others' saved SQL.
If this isn't allowed, then I don't really see the point of the Owner drop-down in the Saved SQL tab.
Any advice?
Thanks!!
JohnHi Sc0tt,
I think you may be referring to the Schema drop-down that appears in the upper-right area in SQL Commands, Object Browser, etc. That isn't the drop-down I'm referring to. I'm referring to the Owner drop-down that appears in the lower-half of the SQL Commands window then you click the Saved SQL link. I understand that to be the ApEx developer who saved the SQL - nothing to do with database schemas.
I saved some SQL using the Save button assuming I could tell my other developers that if they click Saved SQL they'd see it listed. They don't, and the only choices in the Owner drop-down for any of us are "-- All Users --" or our own user. I don't see any setting I can change for our accounts to allow/prevent seeing others' Saved SQL, so either it's a bug, or if it's intentional that a user can only bring back their own saved SQL then there doesn't appear to be any point in having an Owner drop-down.
Thanks,
John -
Keyboard Modifier toggle from command to Control for Leopard
Hi guys I have this script working after a bit of tweaking and the script was originally posted by Lance Ball long ago for Tiger and was for users with a Pc Keyboard. I am swapping control and command for pure gaming preferences; Unfortunately, The script will not work when the Keyboard Shortcuts menu has been opened last in system preferences, would anyone know how to slightly tweak this applescript so that it selects the keyboard button prior?
-- Utility script to switch keyboard mapping for Command and Control keys.
-- Author: Lance Ball & tweaked by Beau Parkes for Snow Leopard
-- Open System Preferences
tell application "System Preferences"
activate
set current pane to pane "com.apple.preference.keyboard"
end tell
tell application "System Events"
-- If we don't have UI Elements enabled, then nothing is really going to work.
if UI elements enabled then
tell application process "System Preferences"
get properties
-- Open up the Modifier Keys sheet
click button "Modifier Keys…" of tab group 1 of window "Keyboard"
tell sheet 1 of window "Keyboard"
-- get the text of the 3rd pop up button
click pop up button 5
click menu item "Apple Internal Keyboard / Trackpad" of menu 1 of pop up button 5
set commandKey to value of pop up button 3
-- looks like we're in default mode. Swap the keys
if commandKey ends with "Control" then
click pop up button 3
click menu item 4 of menu 1 of pop up button 3
click pop up button 1
click menu item 2 of menu 1 of pop up button 1
else
-- We're in PC keyboard mode. Swap back to the defaults
click button "Restore Defaults"
end if
-- close the sheet
click button "OK"
end tell
end tell
tell application "System Preferences" to quit
else
-- UI elements not enabled. Display an alert
tell application "System Preferences"
activate
set current pane to pane "com.apple.preference.universalaccess"
display dialog "UI element scripting is not enabled.
Check \"Enable access for assistive devices\""
end tell
end if
end tell
Thanks guys, Im excited to hear how I can improve the code.
Beau ParkesHi, Beau Parks. Welcome to this forum.
The following version of your script (tested with Mac OS X 10.6.2) should do what you are asking for:
--BEGINNING OF SCRIPT
--Optional part:
tell application "System Events" to set UI_enabled to UI elements enabled
if not UI_enabled then
display dialog "This script utilizes the built-in Graphic User Interface Scripting architecture of Mac OS X which is currently disabled." & return & return & "Do you want to activate GUI Scripting by selecting the checkbox “Enable access for assistive devices” in the Universal Access preference pane?" buttons {"Cancel", "OK"} default button 2 with icon 0
tell application "System Preferences"
activate
reveal pane id "com.apple.preference.universalaccess"
end tell
return
end if
--Main part:
tell application "System Preferences"
reveal anchor "keyboardTab" of pane id "com.apple.preference.keyboard"
tell application "System Events" to tell window "Keyboard" of process "System Preferences" -- GUI Scripting
click button "Modifier Keys…" of tab group 1 -- open up the Modifier Keys sheet
tell sheet 1
click pop up button 5 -- the first button from the top
click menu item "Apple Internal Keyboard / Trackpad" of menu 1 of pop up button 5
if (value of pop up button 3 ends with "Control") then -- we're in default mode
click pop up button 3 -- Control Key
click menu item 4 of menu 1 of pop up button 3 -- Control Key --> Command Key
click pop up button 1 -- Command Key
click menu item 2 of menu 1 of pop up button 1 -- Command Key --> Control Key
else -- we're in PC keyboard mode; swap back to the defaults
click button "Restore Defaults"
end if
click button "OK" -- close the sheet
end tell
end tell
quit
end tell
--END OF SCRIPT
Message was edited by: Pierre L. (I removed a link to a web page) -
Workflow 2.6.4.0.0 configuration problem - Command window does not close
I am trying to install Oracle Workflow 2.6.4.0.0. as part of Warehouse builder using the details mentioned in this link
http://www.oracle.com/technology/obe/10gr2_owb/owb10gr2_gs/owb/lesson4/etl-mappings.htm
From the Start menu click Programs > Oracle <Database HOME> > Configuration and Migration Tools >
Workflow Configuration Assistant. The Assistant is started.
Accept the default for Install Option
Workflow Account: (Accept the default ) owf_mgr
Workflow Password: owf_mgr
SYS Password : <Enter the SYS account password>
TNS Connect Descriptor: localhost:1521:orcl
Click Submit.
However following this document, the command window did not close, and I did not get any message stating that Workflow Configuration has successfully completed.
The command window displays this message as the final step and does not close-
WorkflowCA: Executing :C:\oracle\product\10.2.0\db_1\jdk\bin\java -jar C:\oracle
\product\10.2.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 admin welcome -application WFALSNRSVCApp -testDataSource -location jdbc/WorkflowDS -username OWF_MGR
Is this installation complete? How to resolve this?
Please can any one help?
Thanks very much
AllanI ran into this problem. And it took me while to get it fixed, but It does work.
First the TNS Desc is misleading. One would think that it would be host:port:sid. What it is really looking for is host:port:servicename. But if you want to use the "Change Tablespace" drop down list you need to, enter the sys password, change it to host:port:sid - Then use the drop list. And change it back before you press submit.
The second thing that I found is that it wants to use the SYSTEM tablespace as temporary tablespace. THis is becuase it is looking for a temp tablespace called TEMP. If you look a the line default_temp = SYSTEM. And if you dont supply a tablespace it wanted to change it in the wfsysgnt.sql script in the $OH\wf\sql directory. You would think that what ever the default database tbs and temp tbs is - that owf would use that. No, it wanted to change it. Oracle needs to fix this.
So here is how i fixed it. I had to create a temporary tablespace called TEMP, does not need to be big as I dropped it after it was done. Then i had to modify the wfinstall.csh script and use the install options. Not the /tablespace this option is obayed but it will try to use the SYSTEM as the temp tbs. Here is my example that I appended:
/wfacct "owf_mgr" /wfpasswd "my_owf_mgr_pwd" /debug "true" /tnsConnDesc "my_host_ip:my_port:my_servicename" /syspasswd "change_on_install" /tablespace "OWF_TBS" -
Hello,
I have a challenge automating WPF Application in which they used new type of Wpf Data GridControl i.e "Microsoft.Windows.Control". We cannot access all the properties of this control(RowCount,GetCelldata). Can Anyone get this issue and provide me details of any patch that can resolve this issue?
Please let me know if you need more info and provide resolution ASAPHello,
I have a challenge automating WPF Application in which they used new type of Wpf Data GridControl i.e "Microsoft.Windows.Control". We cannot access all the properties of this control(RowCount,GetCelldata). Can Anyone get this issue and provide me details of any patch that can resolve this issue?
Please let me know if you need more info and provide resolution ASAP -
How to get rid of the command window....
How to get rid of the command window, automatically, once the .bat file which execute the .jar has been executed?
ZnxIf you don't want the command window to show, use:
javaw yourClass
instead of...
java yourClass -
[Request] Move Windows Control Panel applet from "System and Security" to "Programs"
The "Flash Player (32-bit)" Windows Control Panel applet should be moved from "System and Security" to "Programs" where the Java applet is.
Vote: https://bugbase.adobe.com/index.cfm?event=bug&id=2953107
Thanksnjb,
Why not just run the ThinkVantage System Update and let it install as usual. You can also "un-check" those drivers that you don't want to install.
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =) -
Mac shuts down if I do not keep either the Fn, Command or control button held down ?
Hi. I have a mac book pro late 2011 model. I am running Mavericks but but I have a problem where my mac shuts down if I do not keep either the Fn, Command or control button held down. Also if/when this shut down happens I need to hold the shift-control-option keys to restart the mac.
Anybody got any advice for me ?
Many thanks
PaulTry resetting the SMC.
Barry
Maybe you are looking for
-
Open BI Publisher Report From Standard Report Link
I am having problems opening a bi publisher report from a colomn link in a standard report. My standard report is select reg_id, frg_no from my_tableThen in the REG_ID column, I place the following in the URL link. javascript:popupURL('BI_URL.Guest/M
-
DataGrid dataProvider XML with Namespaces,
I have a DataGrid wich dataProvider is a XMLList. The problem is that, the xml has a default namespace, and in my DataGridColumns I use the dataField property to define wich XML field should be displayed. The problem is that the dataField property is
-
If I uninstall/reinstall iTunes will I lose my library?
I want to uninstall iTunes, as I have too many files that are unorganized. I am worried that I will lose my library. Will I lose it, or is there another way within iTunes to update all my file names and locations?
-
Hi, I cannot activate the guest account. In the menu user&groups, the text and the checkbox "allow guests to sign in on this computer" is grey and cannot be activated. Thank you for your assistance. Joerg
-
10.4.7 Update killed my firewire ports
Hello - All was going quite well this morning, but then I upgrade my machine to 10.4.7 which killed my firewire port. All I get in System Profiler is: "FireWire Bus:" No bus info is displayed. It was working this morning before I did the update. I al