Commands Allowed in SAPscript

Good Morning,
I know i can use Command IF...ENDIF in SAPscript. As far as i know SELECT...ENDSELECT and LOOP...ENDLOOP aren't allowed.
Is this correct?
Best Regards,
Pedro Gaspar

Hi Pedro Gaspar,
Yes, you are correct.
We can use IF ELSEIF ENDIF. we we want to use the selects and loops, then
we need to write a External perform with a program, in that Program we can write
these ones(It is same as normal program)
Regards
Sudheer

Similar Messages

Command INCLUDE in Sapscript

Hi all,
I am having problem when use the command INCLUDE with extension PARAGRAPH.
When use in environment DEV the standard text is written using the definitions of paragraphs it informed in the command.
I carried to PRD and the standard text is not using the definitions of paragraphs it informed. it seems to be using the definitions of it I paragraph default.
Somebody can help me?
Luciano
sorry my english

Hi
Are u sure that paragraph exists in the version of the style is being used in PRD.
Max

Which IOS command allows me to check AP's current working mode?

Hi All,
I would like to know that my AP is working in root mode or workgroup bridge mode. I can check it via web browser. Just curious how to check it via IOS command. Thanks in advance.

Hi Robert,
Perform the "show run interface dot0" command to show the running-configuration for your dot11radio0 interface. Look for the command line that starts with "station-role". This will tell you what role your radio is in.
For example, if it is "station-role root bridge", the radio is configured as a root bridge. If it's just "station-role root", then it's configured as an infrastructure AP.
This is what Rob is saying, but a bit more specific. I don't know of there being a "show" command that states what the radio's role is.
Jeff

Control command Address in sapscript

Hi experts ,
Can any one explain me how Address and Endaddress work .
I have the below script in window presently
ADDRESS PARAGRAPH Z1
       TITLE    &VBDKR-ANRED&
       NAME     &VBDKR-NAME1&, &VBDKR-NAME2&, &VBDKR-NAME3&, &VBDKR-NAME4&
       STREET   &VBDKR-STRAS&
       POBOX    &VBDKR-PFACH& CODE &VBDKR-PSTL2& CITY &VBDKR-PFORT&
       POSTCODE &VBDKR-PSTLZ&
       REGION   &VBDKR-REGIO&
       CITY     &VBDKR-ORT01&, &VBDKR-ORT02&
       COUNTRY &VBDKR-LAND1&
       FROMCOUNTRY &VBDKR-SLAND&
       ADDRESSNUMBER &VBDKR-ADRNR&
     ENDADDRESS
I would like to know the difference between the top and one below .
ADDRESS DELIVERY PARAGRAPH Z1
FROMCOUNTRY &VBDKR-SLAND&
ADDRESSNUMBER &VBDKR-ADRNR&
ENDADDRESS
Is there that we set the format For "delievey address" somewhere in system .
If so please can I have inputs for doing
Thanks
Vinay

Hi,
    If DELEVIRY is specified then the address should be formatted as a complete delivery address, using the street name and number rather than the P.O. Box.
    If DELIVERY is not specified and if a POBOX is specified, then the POBOX is used in an address instead of a STREET.
Example
/: ADDRESS
/: TITLE 'Firma'
/: NAME 'Schneider & Co', 'Finanzberatung'
/: STREET 'Kapitalgasse 33'
/: POBOX '12345' CODE '68499'
/: POSTCODE '68309'
/: CITY 'Mannheim'
/: COUNTRY 'DE'
/: FROMCOUNTRY 'DE'
/: ENDADDRESS
Without specifying DELIVERY output will be
Firma
Schneider & Co
Finanzberatung
Postfach 12345
68499 Mannheim
With specifying DELIVERY, then the street name and number will appear in the address in place of the    P. O. Box number.
Firma
Schneider & Co
Finanzberatung
Kapitalgasse 33
68309 Mannheim
Regards
Bala Krishna

@@ START command doesn't allow spaces in folder names

the initial start command:
START 'C:\Database\SQL Files\query.sql'
works, but within the query.sql file i have placed start commands that link other files:
@@ 'Formatting.sql'
When you run the start command, it locates the query file and executes fine, but when it tries to open the Formatting.sql file it seems to consider a space in the foldername as the end of the path, ie:
SP2-0310: unable to open file "C:\Database\SQL.sql"
Are there any ways to make the @@ command allow spaces like the original start command?
thanks for any replies

other than
START 'C:\DATABASE\SQLFIL~1\QUERY'
no
Message was edited by:
Laurent Schneider
get the 8.3 name with DIR /X

SapScript Command to Prevent a Form From Actually Printing

Hi everyone, we have a new requirement that says if a certain group of materials are ordered together within a certain range of quantity do not print the transfer order out on the printer. Our transfer order form is a Z sap-script form. Does anyone know if there is any command available in sapscript that I can insert into the sapscript code to activate when I do not want to print out this form???
Thanks for everyone's assistance in advance.

try to restrict by using if condition in the program .....while using open_form....
if <f1> ne <condition>
exit.
else.
call function open_form
endif.
reward IF......
Regards
Anbu

ADDRESS ENDADDRESS command in SAPScript

Hi Gurus,
How does address endaddress command works in SAPscript.
I want to use it in SAPscript as
ADDRESS
 ADDRESSNUMBER <LFA1-ADRNR>
 FROMCOUNTRY 'US'
ENDADDRESS.
I have gone through the documentation of ADDRESS_INTO_PRINTFORM but still not clear of the sequence.
Want to know, what will be the sequence in which address will be printed from above command and how does it determine this.
Appreciate your help.
Thanks,
Kartavya

Hi,
 Read Below documentation
 The ADDRESS - ENDADDRESS control command formats an address according to the postal convention of the recipient country defined in the COUNTRY parameter. The reference fields are described in the structures ADRS1, ADRS2, or ADRS3, depending on the type of address. Either direct values or symbols may be assigned to the parameters.
Syntax:
/: ADDRESS [DELIVERY] [TYPE t] [PARAGRAPH a] [PRIORITY p] [LINES l]
/: TITLE title
/: NAME name1[,name2[,name3[,name4]]]
/: PERSON name of natural person [TITLE form of address]
/: PERSONNUMBER number of the personen
/: DEPARTMENT department
/: STREET street name HOUSE house number
/: LOCATION additional location information
/: POBOX po box [CODE post code / zip code] [CITY city]
/: POSTCODE post code / zip_code
/: CITY city1[,city2]
/: NO_UPPERCASE_FOR_CITY
/: REGION county / state
/: COUNTRY recipient country [LANGUAGE language code]
/: COUNTRY_IN_REC_LANG
/: LANG_FOR_COUNTRY language key
/: FROMCOUNTRY sender country
/: ADDRESSNUMBER address number
/: ENDADDRESS
The parameter values contain both formatting and address information. The address data are formatted for output according to the data in the following parameters:
TYPE
FROMCOUNTRY
COUNTRY
LANGUAGE
PRIORITY
DELIVERY
LINES
If DELIVERY is not specified and if a POBOX is specified, then the POBOX is used in an address instead of a STREET.
Regards
Bala Krishna

SAPscript address name1 and name2 - print on the same line

I want to print name1 and name2 on the same line in an address on a check. Does anyone know how to do that ? I am usign the ADDRESS SAPscript command.

The ADDRESS command allows you to format according to different countries postal formats. If you want to put two lines in one, I don't think you can use the ADDRESS command, but will have to format it yourself.
Rob

SAPscript Basics

Hi All
plz tell me what is the basic difference and relation between Text module, text symbol and text element in SAPscript
THanks in Advance

hi Rashmi,
 DEFINE: Value assignment to text symbols
Text symbols receive their value through an explicit assignment. This assignment can be made interactively in the editor via the menu options Include Symbols Text. This lists all the text symbols of a text module, as well as those of the allocated layout set.
The contents defined in this way are lost if the transaction is exited. To continue printing the text module, you would have to enter the symbol values again.The DEFINE command allows you to anchor this value assignment firmly in the text, to also have it available when you next call up the text. Furthermore, you can allocate another value to a text symbol in
the course of the text.
Syntax:
/: DEFINE &symbolname& = value
Example:
/: DEFINE &re& = Your correspondence of 3/17/94
Example:
/: DEFINE &symbol1& = xxxxxxx
/: DEFINE &symbol2& = yyy&symbol1&
/: DEFINE &symbol1& = zzzzzzz
Result: &symbol2& yyyzzzzzzz
The assigned value may have a maximum of 60 characters. It can also contain further symbols. When a symbol is defined using the control command DEFINE, symbols which occur in the value are not immediately replaced by their value. They are only replaced when the target symbol is output. If the operator := is used in the DEFINE statement, all symbols which occur in the value which is to be assigned are immediately replaced by their current values. The resulting character string is only then assigned to the target symbol when all occurring symbols have been replaced. The length of the value is limited to 80 characters. The target symbol must be a text symbol, as at present.
Syntax:
/: DEFINE &symbolname& := value
Windows At least one logical window must be defined for every page. (Otherwise it is not possible to format the texts) Window definition involves a list of window names and corresponding window types.
A MAIN window is displayed automatically. A Window mainly contains the SAPscript text and the variables to be printed. The text can be structured into blocks called text elements. There is one special window, MAIN , which contains the output of the line items of a document.
Regards,
Santosh

Inserting image in a sapscript.

Hi everyone,
   I have to change the existing signature in a sapscript to another signature.For that i have that signature as pdf with me.
I want to know how to load this to sap then to my sapscript .
Plz give the steps for
1. Changing that pdf to bmp file( tried changing the extension,but it didn't work)
2. Loading that to SAP
3. Inserting it into the Sapscript
It will be good if i can get it as fast as possible..
Thnaks
Nitin

hi,
How to Upload graphics (IMAGE) to your Sapscript?
Command in your Sapscript
/: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID ST LANGUAGE E
These are the steps to be followed for uploading graphics in R/3 system
1.   First save the file as BMP
2.   Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
      make it Zoom as 100% and save as *.TIFF
3.   Open SE38 and execute program RSTXLDMC
4.   Give your TIFF file path name
5.   Select Bcol (for Color)
6.   TEXT ID will be ZHEX-MACRO-*.
7.   Inplace of * write your own logo name (ZCOMPANYLOGO)
8.   Execute the program
9.   Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
or
In 4.6x :-
1. Goto SE71 Change the mode to GRAPHICAL
2. Choose the Graph Tabstrips
3. Now type in some name for the LOGO WINDOW
4. Press the IMPORT BUTTON (third button from left) and then IMPORT the BMP file from your DESKTOP
5. The code will be written automatically. You just need to drag and drop wherever you want
     the graphics to be.
/:   INCLUDE Z_COMPANY_LOGO OBJECT GRAPHICS ID BMON LANGUAGE EN
regards,
Sooness

MODULE USER_COMMAND_0200 AT EXIT-COMMAND.

Hi Experts,
I knew that the following statements allows user to by pass all the screen validations, so to achieve this we have to declare a function code in SET PF-STATUS of type Exit Command. So, my doubts r,
1- Anyway, we r adding the AT EXIT-COMMAND as a suffix to to Module statement, so again What is the necessity declaring in the SET PF-STATUS as a function code?
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0200 AT EXIT-COMMAND.
2- What else wuld do the above statement apart from overcoming the validations(coz the author has mentioned this statement - ''An Exit-command allows you to insert functionality into the PAI that by passes all screen validation '', Which is I dont understand!)?
ThanQ.

hi Srinivas,
Let us consider the following example:
If a user wants to exit a screen, by clicking the BACK button, he should be taken out ..right?
Instead, should there be a message poping up saying "Mandatory fields are not entered".. or "enter character data in name field"...ect..?
no...hence, to ignore these validation, we put the code to exit the screen in a module. This module has to be defined with ...AT EXIT-COMMAND extension.
Hope this answers your question.
Sajan Joseph.

Sapscript - Diferent Image in every page

Hi all,
I want to know how to change an image of a window for every page that sapscript generate. I want to include a image depending of the business area.
The window is not main type. Is normal window.
Now the image there is not changing, is allways the same.
¿Any suggestion?
Thanks

Dear Jose,
You have to write SAPScript command to achieve this. With command IF and SAPScript Symbol for Page No. you can code to change the Graphic.
Regards,
Deva.

Command Authorization Config best practice using ACS

Hi
Is there any best practices for configuring Command authorization (for router/switch/asa) in CS-ACS? To be specific, is there any best practices to configure authorization for a set of commands allowed for L1,L2,L3 support levels?
Regards
V Vinodh.

Vinodh,
The main thing here is to ensure that we have backup/fall-back method configured for command authorization, inorder to avoid lockout situation or do wr mem once you are sure configs are working fine.
Please check this link,
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml
Regards,
~JG
Do rate helpful posts

CASE --IN SAPSCRIPT

I WANT TO SAY
CASE xxxx
WHEN 3
DO-----
OTHERS
DO-0000000
IT DONT RECOGNIZE OTHERS WHY?

HI.
The below is the help from SAP..
Finding a Match: CASE
The CASE command covers a special case of the multiple case IF command. Rather than allowing an arbitrary condition to be tested in each of the individual cases (as in the general multiple case IF command), the CASE command allows a given symbol to be tested against specific values until a matching value is found.
Syntax:
/: CASE symbol
/: WHEN value1
/: WHEN value2
/: WHEN valuen
/: WHEN OTHERS.
/: ENDCASE
The symbol in the CASE line is formatted. If its value is found in one of the WHEN lines, then the text lines following this WHEN line are printed. If no matching value is found then the text lines enclosed by the WHEN OTHERS line and the ENDCASE command are printed. The WHEN OTHERS section is optional.
As with the IF command, the comparison is always performed on literal values.
A CASE command must be terminated by an ENDCASE command.
The WHEN OTHERS section is optional.

Importance of language in include command

Hi All,
wat is the importance of language in INCLUDE command? in sapscript
i mean wat happens if we ignore/omit language in INCLUDE command?
for example i have 3 item texts
z003 - FR
z007 - IT
z008 - BE
these languages may be changed by the user to any language as per his choice,,,,so we cannot pass hard-code values for lanague in INCLUDE statement..
Thanks
John

John,
Adding to the points mentioned by our frnds above, if you really want the form output to be displayed in different languages, its SE63 T-code which helps in translation.
You can create the standard texts in SO10 with teh same name but in different languages. In translation, in the appropriate version you can call the text in the desired language.
IT works as you require. Try it out and get back for any other issues.
Regards
Priya

Commands Allowed in SAPscript

Similar Messages

Maybe you are looking for