Comments won't work

When people try commenting on my blog, there is an error window that comes up saying "We're sorry. We're having a problem processing your request."
This has only started happening since the .mac to mobileme switch.
My blog is at http://web.mac.com/michael_mcnamara if you want to see for yourself.
Is there anything I can do to fix it, or does the problem reside with Apple?

I have solved this problem, too. Maybe the earlier explanation was not clear enough, so give me a go at it. . My Blog URL starts with http://web.mac.com This is the URL where the comments function has ceased to work. It was created in iweb by clicking on "publish" which appears at the very bottom of the iweb screen in between "+" and "Visit". If you hover over the "publish" button, you will see the words: "Publish all your websites to mobileme". Apparently this "publish" button is not working correctly. For me, it creates the site at http:// web.mac.com. For it to work, the site must be published to http://web.me.com.
Now, contrast this with the option that DOES work. In iWeb, go to the very top of your screen to "File" and click on "Publish All to mobileme". Note when you do this, it publishes to a site that starts with http://web.me.com and your comments will work. Seems like this should be a pretty easy thing for Apple to fix.
Bob Cushman

Similar Messages

Since the iOS7 update on my iPad 2, I am having trouble charging it if it runs all the way down, and now, my Safari won't work at all, and it locks up when I click on Safari in the Setting section. I have tried restoring, and Safari still does not work??

I cannot reset the Ipad either, Safari won't work, and it won't charge properly if the battery runs all the way down...

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

Touchgraph link browser right click won't work; jre 1.4.2_03 linux

touchgraph link browser right click won't work; jre 1.4.2
Wanted to mention that the touchgraph link browser(java client) client starts correctly in Redhat 9, but i found one problem when trying to edit links. The problem being that I can't open the small popup menu when i right click in linux RedHat 9. left clicking while dragging on a selected link (in edit mode) lets you create a new link both in microsoft windows 95a and in Redhat 9. When i right click in win95a, a small menu appears that allows me to edit a link, but this menu doesn't appear after right clicking a link in edit mode in redhat 9 (which does work with TG link browser in win95).
I tried using a 2 button mouse with 3 button emulation. I also tried to use a 3 button logitech trackball which works with the old logitech c7 setting in Redhat. I also tried to operate the mouse with it's three buttons using the number keypad in linux, which works in other applications under linux. The same problem still happens in trying all of these methods.
I was told that unix and windows use different "select," "extend," and "menu" buttons(in relation to the mouse).
Maybe, microsoft windows is using a different method of interpreting the right mouse button than redhat linux 9. if so, maybe there is a way to do this in linux (really, i have no idea how this could be done, but am open to try).
If there is a solution, i would appreciate knowing how to go about doing it. .
note: I am using Sun's java 1.4.2_04 in windows 95a and I am using Sun's java 1.4.2_03 in Redhat 9. Both are the most current, i just downloaded them recently.
note: touchgraph link browser is an open source java client and applet under the GNU general Public License. I think that the source code was included with the binary. I am using touchgraph link browser v 1.20 . I downloaded from sourceforge.net
in google i found the following:
https://lists.xcf.berkeley.edu/lists/advanced-java/1999-September/000532.html
note: mara, you helped me before when i was practically installing redhat 9 and i had a problem with the installation and you mentioned that it was a faulty cd-rom drive. with your help, i am enjoying in learning about linux for the past 5 months since your answer helped me install redhat 9 successfully. Thank you very much since my very first question to you.
Answer Hello,
I downloaded the program and, if I think of the right situation, the right-click doesn't bring a menu for me. The thing I noticed is that when I drag a new link and (with left mouse button pressed) press right button it has an effect of 'canceling' the link. That's why I think that right mouse button works correctly. The problem is why the menu does not appear.
I can see two reasons, both causing problems not easy to solve: bug in the program or incompatibility between Windows and Linux java versions. The second one should not happen.. but it doesn't mean it's impossible. A bug in the program should be easier to find, but not by me (with not very big Java experience it'd take me several days).
What I'd do in your place is to mail the program developers (or report a bug). It won't make things worse, but can fix things.
Sorry that I can't help more
Mara
notethe second half is a post i made to all experts.com

http://www.realvnc.com/pipermail/vnc-list/2001-February/020570.html
this Url has a comment on this problem in linux. just wanted to post this. it might help.

ITunes won't work after updating to iOS 8.3

After updating to iOS 8.3 my iTunes App on my iPhone 6 Plus and iPad Air now both don't work.
If I go to play an sample of a song, the little square box with the cover on spins around and then spins back around and no music will play. I'm all so unable to play any music that I've already purchased via iTunes on my iOS devices.
Any comments on what could be causing this?
All so, on another note. My friend has just updated to IOS 8.3 and he just noticed that he no longer even has the iTunes App on his iPhone 5.
Thanks.

After posting this, I've since found out that my iOS iTunes App on my iPhone 6 Plus works all OK when on WiFi, it just won't work when on the data/3/4G connection.
Anybody else having this same issue since updating to iOS 8.3?

USB 3.0 Hub won't work in 3.0 mode

I have a Portege Z835-P372 and my USB 3.0 Hub (StarTech 2 port hub) won't work in 3.0 mode.
When I purchased the StarTech.com hub, it came with no instructions or CD (with drivers, etc). Their website also has no driversor firmware updates for the hub (As I understand, the hub itself doesn't need any drivers).
When I connected it to my computer the first time it installed it as a Renesas Electronics 2.0 hub. It thus always works only in 2.0 mode.
As I understand I probably need the latest NEC/Renesas drivers and firmware updates, these I have downloaded from the Toshiba driver site, but still no luck.
I did some research and found that the drivers on the Toshiba site are old and there are newer ones out there (but from other sites that I had to register and pay for). Are they available elsewhere?
I did some more research into similar problems people are having out there and there were comments that the Intel USB 3.0 Driver also has to be updated.
Any suggestions?

hey RagingPigeon,
try uninstalling all USB control drivers from your unit and then install this :
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS015025
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Firefox upgraded, shortcuts won't work

I recently upgraded Firefox and now the shortcuts for Facebook won't work. (ie. pressing Enter to post a comment). Also, after posting at Facebook I'm not able to delete the post either. I tried clicking the "remove post" button and it was just loading. Photo upload doesn't work either. Maybe both Facebook and Firefox have problems regarding the new upgrade.

The G5 is a PPC Mac. Chrome and Fx require an Intel (architecture) processor.
Get TenFourFox
http://www.floodgap.com/software/tenfourfox/
There is also Camino
http://caminobrowser.org/download/

Curve 9300 scroller won't work

For the past few months, my scroller has been sticking and freezing, but i have managed to fix it everytime by pressing down hard or doing a battery pull. Also, the screen would just randomly turn white and then the phone would restart. The white screening was getting unbearable, so i did a software reload through desktop manager and since my scroller won't work at all. It wont select or scroll. Someone please help!!!!!!!!

Good deal. I still think the phone is having hardware issues from what you described and a tech will have to check it out.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Tascam US-122L won't work on my new iMac

Just bought a brand new iMac 3.06 GHz Intel Core 2 Duo with OSX10.6.2 and my Tascam US-122L audio interface won't work. It worked on my old PC (slowly!), and it works on my friend's iMac with OSX 10.5.8, but not on mine!
The Tascam control panel says "Device: none found", and the Garageband Audio input and output don't recognize the US-122L as being connected (they do on my friend's iMac with 10.5.8)
I've emailed Tascam - they're very quick to respond, but the suggestions of new drivers, uninstall and reinstall drivers, firmware etc have not made any difference.
Then I tried calling them - they told me it had nothing to do with 32 bit versus 64 bit, but that the new iMacs did not have enough power output from the USB ports to run the US-122L, and that I needed a powered USB hub. I've borrowed one to try, and guess what - still doesn't work!
Any suggestions would be welcome, since Tascam don't seem to be able to help.
Thanks.

I doubt that insufficient USB power is the problem (whether supplied from a powered hub or an iMac). The Tascam US-122L is a discontinued model, replaced by the "Mk II" version, but either should comply with the USB bus powered spec to draw less than 500 ma (2.5 watts) or it wouldn't work with any standard USB host & most (including iMacs) would display a warning about it drawing too much power.
I suspect this particular unit is somehow defective, in part because of the above & in part because of the "slowly" comment in the original post.

Rhythmbox 2.90.1-2 Won't Work in gnome3 [Solved]

Hi there, i'm using gnome3 in FallBack mode.
i have Nvidia 5500 Fx that Using Nouveau Driver, Xorg 1.10 (at testing).
Rhythmbox won't work.
output:
$ rhythmbox
(rhythmbox:2521): GLib-GObject-WARNING **: specified class size for type `PyGtkGenericCellRenderer' is smaller than the parent type's `GtkCellRenderer' class size
(rhythmbox:2521): GLib-GObject-CRITICAL **: g_type_get_qdata: assertion `node != NULL' failed
(rhythmbox:2521): GLib-GObject-CRITICAL **: g_type_get_qdata: assertion `node != NULL' failed
(rhythmbox:2521): GLib-CRITICAL **: g_ascii_strncasecmp: assertion `s2 != NULL' failed
Segmentation fault
Last edited by Bersam (2011-04-13 12:25:24)

oh worked ... yes i was using rhythmbox-microblogger that using pygtk.
Thanks.
http://aur.archlinux.org/packages.php?ID=40596
(Sloshy Commented that!)

Canon LiDE35 scanner won't work with latest CanoScan software

I upgraded my MacBook Core Duo (2006) to Snow Leopard this weekend. All fine except even after loading the latest Canon Driver (lide35osx7721en.dmg) and restarting, then using CanoScan Toolbox 5.0.1.3 -- I get the message "Can't find Driver".
If I go back to 4.5.1.2 version of CanoScan - it works OK! But the 5.0.1.3 software is easier to set, gives lots of choices - it should work, right? Has anyone tried this or can anyone comment. (I never got 5.0.1.2 nor 5.0.1.3 to work with Leopard either - but hadn't updated the DRIVER - now I have but it still can't "Find" the driver!)
Thanks for any comments here - at least I can scan - and sure, maybe I could update this 5 year old scanner - but it works great!
Best regards,
Steve Schulte
Tuesday 27 April 2010

Hi Steve,
The Canon Australia web site is only showing v4.5.1.2 of CanoScan Toolbox for the LiDE35 (same version for Windows and Mac). There is no mention of v5.0.1.3 being supported by this model so this could explain the application is unable to locate it. The applications typically have a built-in list of support devices and if the 35 is not in this list then it won't work. Again with reference to the Canon web site, the LiDE 600F and 70 show v5.0.1.4 of CanoScan Toolbox. Later models, such as the LiDE 100 and 200 released last year, don't use the Toolbox application. Instead they work with MP Navigator or OS X apps like Preview.
Pahu

Application worked under Adminstrator account but won't work under standard

I wanted to setup the Toontown Launcher application for my son under his "standard user" account. But the application only works when I log in as an administrator, it won't work when my son log in as a standard user. It said "Cannot run application from this location. Copy app to desktop." I tried to copy it to desktop but it still won't work with same error message. FYI, I did not turn on Parent Control for the standard user account. Anybody knows why? I'm new to Mac and am pulling my hair out trying to fix this!!! Thanks for reading.

Most apps for a Mac are just drag & drop, although some require installers. Those that do usually have uninstallers. I've never used a 3rd-party uninstaller in 25 years of using Macs, so can't comment on them. However, since you're new to the Mac world, pause a moment and get up to speed before going down the road any further. See these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Anatomy of a Mac,
MacFixIt Tutorials,
MacTips, and
Switching to the Mac: The Missing Manual, Snow Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

HT5848 iTunes Radio won't work

Just updated my iTunes and the iTunes Radio won't work. An error message comes up everytime after I choose a station. All the featured stations are missing as well (i.e. they're just not even there). Any help?

I can see this comment fell on deaf ears. iTunes radio also randomly skips large chunks of songs... Usually the good ones.

Encore WT8 touch screen won't work, prevents me from logging in

I have just bought this tablet but it is a Dabs refurbished model, so not sure of its history. I went through the setup process and brought it on holiday. I discovered that once it was setup, every time it went into sleep mode or was powered off, the touch screen became unresponsive after it powered back up. I don't have an OTG cable, or a keyboard/mouse for that matter. In a small town where it won't be possible to buy one. May just have to wait until I get back and can use a cable and keyboard to log in. Not sure what the pattern is but from time to time, it has reacted to touch and allowed me to log in. When it did, I performed all windows updates, including drivers that were suggested. I have an old XP laptop which I am using now and once when I plugged it in via USB, it got the screen working for long enough to let me log in but that won't work now. I tried to log in from my Lumia using RDP but it says it can't. May just be the version of 8.1 that's on the tablet. I can get into the BIOS menu and the touch screen works in there. It is at V2.00 and the tablet is a PDW0AE-00900PEN Any other suggestions or should I give up and enjoy my holiday?

The screen rotates as normal. I tried resetting the device but it doesn't work. In the device manager, it shows that the I2C HID device has a problem. It fails to start. This doesn't change after a reset. I dug a little deeper and the driver is hidi2c.sys. There doesn't seem to be a newer version of the driver. I did some reading and found people commenting that Toshiba aren't very good at fixing this sort of driver issue. it also may be that a windows update has caused a conflict which may be fixed by Microsoft. Either way, I can't see any way for me to fix this besides resetting my tablet to factory and preventing windows updates. I may do that once I am somewhere with more resources around me.

Upgraded eMac, now fan won't work

Hello,
I just upgraded my son's eMac - put in 1GB RAM, Pioneer DVD-R drive and 320 GB hard drive.
All the upgrades work just fine (and he is very happy), but now the fan won't work. I've checked and double-checked the connections - there were two connections that I've unplugged and plugged in three times. The fan can spin if I flick it, so it is not impeded in any way.
Any ideas?
eMac Mac OS X (10.4.9)

Yes, the fan was operating fine because it was so loud you couldn't miss it.
I appreciate Roam's comments, but my electrical engineering background is spotty. I understand that it is either the fan or the connection to the fan, but I have not the tools nor the knowledge to connect a battery to see if the connection is good.
What I can't figure out is what went wrong. There are only two connections coming from the fan unit, and one is actually the power supply that goes to the electrical plug (which is part of the fan unit). That one is obviously working fine because the computer powers up. The other one is this simple looking small snap-in connector that seems like a total no-brainer to attach. It's not something that could even easily get bent or anything.
I'm obviously missing something important, or the fan picked a really weird time to stop working.
For now he's shutting the computer down when it feels hot. I'm sure that's not a good solution.

I had lion and am now using 10.6.8 and my iphoto won't work

I had lion and am now using 10.6.8 and my iphoto won't work I am told that I need to use another version of iphoto

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If you're able to create and run a new library successfully the culprit is your current library.
In that case try the following on your current library:
If you have the space available on your hard drive and don't aready have a backup copy of the library make a temporary, backup copy (select the library and type Commadn+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Comments won't work

Similar Messages

Maybe you are looking for