Commit button

Hi,
in ADF, How can I use commit button for both:
1.save in db
2.move to other page
Thanks..

When you drop a Commit button onto a jsp, only the ActionListener property is used for execution. Therefore, set the Action property to a forward to another page. You can create those in the faces_config (check your dev guide for further info on that).

Similar Messages

Commit button dont work

Hi,
I have a page with a read only table on top and an editable form under it ,there is no problem in adding data but when I select one row on table and want to changing its data in the form by clicking commit button no action occur and the new data for that row are not saved,in general I couldn't save any changing on data???????????
Thanks in advanced.

the disabled attribute of commit button is set to #{!bindings.Commit.enabled} , First, try to test the commit button after removing the above EL expression.
Secondly, if you want to retain the above EL, you'l need to add all updatable fields of your page as partialTriggers to the commit button.
However, it is not clear from your posts if your button is actually disabled (grayed out) or enabled but doesn't work.
If it is the latter case, then look for some validation failure in your log. A reason your commit is not successful is some kind of error (like EO validation failure) that wasn't shown in the UI.

Where is the commit button to save edits?

How to save edited image after making changes, I find no commit button?

If you're talking about the PSE Editor, use File->Save or File->Save As
If you're talking about using Adobe Camera Raw, there is no such function because your edits are saved automatically without you having to specifically take action

Big trouble with multiple forms in a page and submit - commit buttons

Hi
Thank you for reading my post
I have created a menu system based on a sample 61 at
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html
so , on each page i have a form that contains my menu system , when i add second form to this page by using drag and drop , its submit / clear button works but Commit button does not change to Enable and stay disabled.
I change the Disabled property of Commit button to true but it does not operate (does not store data into DB)
I tried my work on a page without those menu system and it works fine.
so i think there should be some tricks for pages that contain more than one form and has a Commit button.
can some one clearify ?
thanks

Can it be a problem with my whole application ?
I tried other applications with same condition and they workd :((
even i made a new page in my application and put only one form into it , the commit button is turned off for ever :((
is it possible that i touched some configuration and commit become permanently disable ?
it will be huge pain if i need to create the project skeleton again , it has more than 20 pages and all navigations and mune system is set :>
any clue ?
I should say that , Jdeveloper hanged once and i kill its process, can that be the source of problem ?

Commit Button Still Disabled After Table Edit

I am using JDeveloper 11.1.1.6.
I have a table on my page that is clickToEdit.
I have CreateInsert and Delete buttons.
I have Commit and Rollback buttons that are initially disabled.
When I edit the value of an existing field and press Enter, the Commit and Rollbak buttons remain disabled.
If I add a new record to the table, the Commit and Rollback buttons are enabled (as expected).
I know I can add a partial trigger to the button with the id of the table, but the final application will have many tables.
I don't want to add each table id to the partial trigger of the buttons.
How can I set it up so the Commit and Rollback buttons are enabled after a table modification?
Thanks,
Ray

Arun,
Thanks for the info, but it looks like this thread has the same problem.
The thread states "Do not forget to include the 'Commit' button as a PPR target in order the button to be refreshed."
I assume this means I need to add the control's id to the commit button's Partial Triggers. This results in the same problem as stated originally.
Am I missing something?
Ray

Commit button in Headstart Toolbar does not change at Record Insert

In some (we have al least three different forms) forms with a multi-record block the toolbar does not register a status change if a new record is entered and the commit button wil not be enabled.
Could someone tell us which trigger(s) effect the toolbar. It seems that it will work if you execute enter_querymode and execute-query first.
We are using Headstart version 6.5.3.1 for 9i.
Thanks,
Sander Carmiggelt
SFB ICT Diensten
The Netherlands

hi Sander,
Possibly you are hitting a designer bug. When u use a list of values on the first enterable item in the multirecord block, this behaviour occurs. Also the behaviour that u will not be able to delete the last child record, because of the error 'field must be entered'. We are experiencing this problem as well and we managed to change most the multirecord blocks so they don't have a LOV as first item, bust it does not in all cases work or just wasn't possible.
Hope this helps.
Edwin

ADF 11g- Selecting Maximum value of a field on Commit Button

Hi
I am trying to assign a value to a field on form by selecting max(id)+1 from database table on commit button.
It assign the value to field but try to commit before assigning value.
code is like this:-
public String commandButton2_action() { ////////////////a commit button.
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("Commit");
commandButton3_action();////////////Retrieve the maximum value from database.
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
return null;
please do guide. what to do.
Regards
M Niaz

Thanks,
I know, that's why i am try to put this on save button instead on any other.
But this is not an issue whether to use sequence or max()+1. I can use sequence instead but even then i have to get the nextvalue on form before commit.
and i have to put that on commit button.
Commit but try to commit the form before getting anything from DB.
M Niaz

Commit button disabled after CreateInsert Operation... :(

Hi! I have app module with VO in multiple levels, like this:
-VO1
----VO2
--------VO3
------------VO4
------------VO5
I created one jspx page for each VO and represented VO as Table. All works fine with VO1, VO2, VO3, I can insert data in table using CreateInsert operation and Commit it using Commit operation. After I create new row in table using CreateInsert, commit operation comes enabled. My problem is with VO4 and VO5. When I press CreateInsert button new row appears in VO4 and VO5 tables, but Commit button are disabled. When I press second time CreateInsert button then again new row appears and now Commit button is enabled. WHY I need to press two times CreateInsert button for VO4 and VO5 tables to enable commit, but for VO1, VO2 and VO3 tables only once. From all VO I created table in the same way and checked all 3 times.
Where might be the problem and how to resove it? If need more info, please let me know.
Best regards, Debuger!

Yes, the problem is in Model Layer. The same problem is in AM. With VO1,2,3, all works fine, when I add new row then commit is enabled, see: http://my.jetscreenshot.com/2677/20120629-hqbt-90kb
But when I try to add new row in VO4,5 then commit is disabled, see: http://my.jetscreenshot.com/2677/20120629-bchq-94kb. Commit comes enabled only when I enter some data, see: http://my.jetscreenshot.com/2677/20120629-hy9o-95kb
Where might be problem? What code post there to help You?
Best regards, Debuger!

Commit button on panelCollection toolbar facet does not save changes

Using ADF 11.
I have a master-detail relationship.
The master is in panelFormLayout.
The detail is af:table enclosed by af:panelCollection.
On the toolbar facet of the af:panelCollection, I have put a Commit button to save changes on the master table.
When pressing Commit, the changes on the master are not saved.
If I put the Commit button outside the toolbar facet of the af:panelCollection, it works.
Is there a way to have the Commit button working inside the toolbar facet of the af:panelCollection?

we have same issue, it seem to apply value only in the panelCollection.

JDev 11.2.1 Commit button does not save data

I am using JDeveloper 11.1.2. I am having trouble saving updates to the database. I am trying to create an application that displays database records in a form, allows the user to modify data in the form and them saves that data to the database. I have successfully created the database, entity objects, view objects and application module. I created the form on the page by dragging the data control on to the page. I used the same method to create a table from the same data control. I included a submit button on the form. I dragged the create, delete and commit buttons onto the form. This application gets the data from the database, the user modifies it, select the submit button. This displays the change in the table. I can do the same with create and delete. However, I use the commit button to write the data to the database but it never happens. I have set up logging with –Djbo.debugoutput=console. I can see that the delete button {#bindings.Commit1.execute} is doing something but no change is made to the database.
Thanks for your help, Steve

I have had some success. I tested with the BC browser in my application and got the same results, no update. So I created a new application. I used the 'Create Business Components from Tables' option to create a set of Entity objects, Entity View objects, and Query View objects. The interesting thing I found was that when running the BC browser and trying to update the database using an Entity View object I had success. Was able to add and modify records and results saved in db. However, when I use the browser and try to do the same thing using a Query View object I get the behavior I've been seeing all along, it looks like it is working but not data saved to the database. In order to make the Query View object updatable in the browser I had to make all of its attributes updatable 'Always'. this made the view look updatable in the browser but no save. In my real application I did not have any Entity View objects. the Query View objects look the same so I didn't create any Entity View objects. So I want back to my real application, removed all Entity objects and Query View objects, recreated them with the 'Create Business Components from Tables' option. I created Entity View objects this time. When I drat a data control based on an Entity View onto my page I can make updates and the commit works.
I'd like to understand the difference between the Entity View objects and the Query View objects. Once they have been created I have a hard time telling them apart. The Entity View object for the Employee looks very much like the Query View object for Employee. There are some flags set differently and the Entity View object 'Entity Objects' tab shows the Employee table selected. I can tweek the Query View to look like the Entity View but it still does not behave the same, the commit does not save data.
Thanks for all the help, Steve

Commit Button Missing or Broken

Hello Adobe Community,
Ive recently begun work with Photoshop CC, having used previous versions (CS3 - CS5), many of the tasks I perform require the use of the commit or cancel button. Recently, I've had issues with them. When working with text, placing or transforming an object, one of two things happen. Either the Commit and Cancel buttons are missing from the horizontal tool bar or the Cancel button shows, but the Check mark of the Commit button is only half shown (it's basically a V or a \). Is anyone else having this issue and is there a fix to this? I've got the most up to date version of PshopCC (updated this morning), but to no avail. Screen shots included below.
Any help greatly appreciated. Thanks!

You closed and restarted Photoshop after making that change?
You have the latest update, i.e., Photoshop CC 14.2.1?
Is there anything special about your Windows desktop metrics? Any 3rd party "skinning" software installed?
Here's what I see:
-Noel

How to disable Commit button declaratively (11g)

Hello,
I have a commit button (wired up to the Commit DataControl operation of an application module).
It is in a toolbar.
After I press commit, it never becomes disabled, even though I have ChangeEventPolicy set to ppr on the Iterator that the Commit Binding points to as shown on the Page Data Binding Definition editor.
How can I get the button to disable? Setting any of the other UI components as a partialTrigger doesn't do anything, because--I'm guessing here--none of them change during a commit.
Edited by: lili5058 on Feb 26, 2009 12:12 PM

Drop a setactionListener on the button put from value as #{true} and to value as #{processScope.disablebtn} and put the disable condition on button as #{processScope.disablebtn==true}.
regards
Edited by: user4508710 on Feb 27, 2009 3:21 AM

Problem with Commit button When Backing bean is in Request Scope...

HI Everybody,
I have a Backing Bean in request scope having over 1000 lines of code, And in my JSPX page I have a table binding with a view object and At run time when user select the row in table and click the edit button so user will be able to edit that selected row in the same table at run time.. but the problem is : when the user enters some data in the Editable inputTexts and then clicks save(Commit), then the save button doesn't work..but when i delete any selected row and then press save then it is working fine..
And to test it in Session scope i made another sample page where every thing is working very fine..
Now i want to know What is the difference between Session scope and request scope bean...
And is there any solution to Save editable input text in Request scope?.
Also want to know that is it safe to set the scope of my main bean class to session scope without effecting the current running functionality? which is having over 1000 lines of code and lot of component has been placed...
Please help me to resolve this problem...
Thanks in Advance to all of you
Fizzz..

Hi Frank...
In my code i used almost same logic as Andrejus Baranovskis has explained in his Editable Table example...
You can refer that example to see what problem I'm facing...
http://andrejusb.blogspot.com/2007/04/create-edit-and-delete-operations-in.html
The Bean Scope in this Example is Session scope...Save button is working fine...
But as i Change the bean scope to Request scope then Save button is not working for Edit but it is working for Delete Action very well..
I want that save button should work also for Edit action in Request Scope..
Please Make me understand that why it is happened like that..
and help me to find the solution..
and Also if you have a better document to Explain the life cycle of Application in Different Bean Scope...So please provide me that Doc to me...
It would be a great help for me to understand the concept of session...
Thanks Frank
Fizzz...

Commit operation button not working

jdevloper 11.1.2.0
version 64
i drag and drop operation commit to my page and
make disable proporty false
but commit button just post my new value in page and not commit in database
and this the code source
<af:commandButton actionListener="#{bindings.Commit.execute}" text="Commit" id="cb7"
                                                  disabled="false" partialSubmit="true"/>
and this source for page
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
    <af:document title="doctype.jsf" id="d1">
        <af:messages id="m1"/>
        <af:form id="f1">
            <af:pageTemplate viewId="/myTemplate.jsf" id="pt1">
                <f:facet name="body">
                    <af:decorativeBox id="db1">
                        <f:facet name="center">
                            <af:table value="#{bindings.DocTypeView1.collectionModel}" var="row"
                                      rows="#{bindings.DocTypeView1.rangeSize}"
                                      emptyText="#{bindings.DocTypeView1.viewable ? 'No data to display.' : 'Access Denied.'}"
                                      fetchSize="#{bindings.DocTypeView1.rangeSize}" rowBandingInterval="0"
                                      filterModel="#{bindings.DocTypeView1Query.queryDescriptor}"
                                      queryListener="#{bindings.DocTypeView1Query.processQuery}" filterVisible="true"
                                      varStatus="vs"
                                      selectedRowKeys="#{bindings.DocTypeView1.collectionModel.selectedRow}"
                                      selectionListener="#{bindings.DocTypeView1.collectionModel.makeCurrent}"
                                      rowSelection="single" id="t1" width="500" columnStretching="last"
                                      displayRow="first" allDetailsEnabled="true"
                                      partialTriggers="::cb1 ::cb2 ::cb3 ::cb4 ::cb5 ::cb6">
                                <af:column sortProperty="#{bindings.DocTypeView1.hints.TypeId.name}"
                                           sortable="true" headerText="Type Id"
                                           id="c1" align="center">
                                    <af:inputText value="#{row.bindings.TypeId.inputValue}"
                                                  label="#{bindings.DocTypeView1.hints.TypeId.label}"
                                                  required="#{bindings.DocTypeView1.hints.TypeId.mandatory}"
                                                  columns="#{bindings.DocTypeView1.hints.TypeId.displayWidth}"
                                                  maximumLength="#{bindings.DocTypeView1.hints.TypeId.precision}"
                                                  shortDesc="#{bindings.DocTypeView1.hints.TypeId.tooltip}" id="it1">
                                        <f:validator binding="#{row.bindings.TypeId.validator}"/>
                                        <af:convertNumber groupingUsed="false"
                                                          pattern="#{bindings.DocTypeView1.hints.TypeId.format}"/>
                                    </af:inputText>
                                </af:column>
                                <af:column sortProperty="#{bindings.DocTypeView1.hints.TypeName.name}"
                                           sortable="true" headerText="Type Name"
                                           id="c2" align="left" rowHeader="false">
                                    <af:inputText value="#{row.bindings.TypeName.inputValue}"
                                                  label="#{bindings.DocTypeView1.hints.TypeName.label}"
                                                  required="#{bindings.DocTypeView1.hints.TypeName.mandatory}"
                                                  columns="#{bindings.DocTypeView1.hints.TypeName.displayWidth}"
                                                  maximumLength="#{bindings.DocTypeView1.hints.TypeName.precision}"
                                                  shortDesc="#{bindings.DocTypeView1.hints.TypeName.tooltip}" id="it2">
                                        <f:validator binding="#{row.bindings.TypeName.validator}"/>
                                    </af:inputText>
                                </af:column>
                            </af:table>
                        </f:facet>
                        <f:facet name="top">
                            <af:panelGroupLayout layout="horizontal" id="pgl1">
                                <af:commandButton actionListener="#{bindings.Commit.execute}" text="Commit" id="cb7"
                                                  disabled="false" partialSubmit="true"/>
                                <af:commandButton actionListener="#{bindings.CreateInsert.execute}" text="CreateInsert"
                                                  disabled="#{!bindings.CreateInsert.enabled}" id="cb5"/>
                                <af:commandButton actionListener="#{bindings.First.execute}" text="First"
                                                  disabled="#{!bindings.First.enabled}" partialSubmit="true" id="cb1"/>
                                <af:commandButton actionListener="#{bindings.Previous.execute}" text="Previous"
                                                  disabled="#{!bindings.Previous.enabled}" partialSubmit="true"
                                                  id="cb2"/>
                                <af:commandButton actionListener="#{bindings.Next.execute}" text="Next"
                                                  disabled="#{!bindings.Next.enabled}" partialSubmit="true" id="cb3"/>
                                <af:commandButton actionListener="#{bindings.Last.execute}" text="Last"
                                                  disabled="#{!bindings.Last.enabled}" partialSubmit="true" id="cb4"/>
                                <af:commandButton actionListener="#{bindings.Delete.execute}" text="Delete"
                                                  disabled="#{!bindings.Delete.enabled}" immediate="true" id="cb6"/>
                            </af:panelGroupLayout>
                        </f:facet>
                    </af:decorativeBox>
                </f:facet>
            </af:pageTemplate>
        </af:form>
    </af:document>
</f:view>

see its my code
i not know java well its cant defined in variable bc
and when i put it in above it cant know ValueBinding vb
package view;
import javax.faces.context.FacesContext;
import javax.faces.el.ValueBinding;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.binding.BindingContainer;
import oracle.binding.OperationBinding;
public class messageAfterCommit {
    public messageAfterCommit() {
    public BindingContainer getBindings() {
         return BindingContext.getCurrent().getCurrentBindingsEntry();
    public String msgAction() {
        BindingContainer bindings = getBindings();
        OperationBinding operationBinding = bindings.getOperationBinding("Commit");
        Object result = operationBinding.execute();
        if (!operationBinding.getErrors().isEmpty()) {
           // return null;
   // And here is getBindings() method:
                  FacesContext fc = FacesContext.getCurrentInstance();
                  ValueBinding vb = fc.getApplication().createValueBinding("#{bindings}");
                  DCBindingContainer bc = (DCBindingContainer) vb.getValue(fc);
         return bc;
       // return null;

ADF Form Submision and Commit on Same button

HI All,
I have created a jsff which contains 2 forms. My requirement is to create a button which first submits the form and then do the commit too on same button click.
I am able to do it in 2 steps, as i have Submit button and commit operation available.
But my query is that Submit is not displayed as any operation, Then how can i write any method in my bean for making sure that i do both the tasks on same button.
Regards
Harsh

Hey John,
Commit button my page does not gets enabled unless i submit the form.
Sorry if i am sounding stupid.I am kind of new to ADF .
Regards
Harsh

Commit button

Similar Messages

Maybe you are looking for