Common field required in LIPS AND VEKP

Hi,
is there any common field  in b/w LIPS AND VEKP tables to relate both the tables.
Subbu.

hi
first u go for link between
LIPS and VEPO  --  VBELN(Delivery Doc num)  and   POSNR(item) are common fields
then Link VEPO and VEKP -- VENUM(Shipping unit Number) is the common field...
Regards
Smitha

Similar Messages

  • Common Table required for Shipment and Delivery

    Hi Guys,
                 What is the Table where I can give input as Shipment Number and get all the deliveries for that Shipment.
    Thanks,
    Prasad.

    HI
    YOU CAN GET IT FROM TABLE VTTP   by giving input as shipment no. u will get  delivery no. from this table and then from table LIPS by using this delivey no. u can get all delivery details.
    and in addition to that u can also refer link: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e944e133-0b01-0010-caa2-be2cb240f657
    regards
    rahul
    Edited by: RAHUL SHARMA on Feb 20, 2009 8:11 AM

  • Fields required based on a value in another field

    Hi,
    I am looking to have fields required (Annual Revenues and # of Employees) based on the value of another field (Ownership). Basically, if the value is Public the user is required to enter the Annual Revenue and Employees fields. I thought about using dynamic layouts but the only key field for Accounts is Account Type.
    Thanks,
    Caryn

    Hi Caryn!
    I think it is not possible for making #Employees and Revenues required depending on Ownership(as it is a look up field).. it should be possible if you want to do it on any other criteria other than ownership by just renaming the Account Type, Disable all the values of Account Tyope add new values to Pick List and make it driving picklist upon your requirements..
    If you require Account Type, create a custom picklist "Account-Type" and add the values.

  • Common field between ar and sd billing

    Hi experts,
    What is the common date field between sd billing  and Accounts receivables ?
    Regards,
    Nishuv.

    Hi Aduri,
    Upto now i have joined company code, customer in the infoset. But as per my requirement some more
    mappings are required. Please suggest some more fields that are common between these two.
    And also if we go for custom cubes, 
    Our requirement is,
    To which customer we sold a particular material and what is the Amount pending from the customer.
    For this from Billing Cube i want the fields,
    Material, Company code, Plant, Customer, Material Group
    From AR cube i want the fields:
    Debit/Credit Amount,Item Status,Posting Date,Net due date,Clearing
    Plz suggest me how to create a custom cube based on these two.
    Regards,
    Nishuv.

  • Tables list and fields required

    Table names and fields required for the list out stock quantity by product code or Stock Group in reports

    Hi ,
    Table- MARD , search for the required stock(type/group/quantity).
    Hope this helps!

  • Accounts Receivable Reports:Table and field required

    Hi experts,
    My user requires said reports in the following formats:
    Posting date Invoice no. Customer  code  Invoice amount  Payment received outstandig amount
    Now i want to customized this reports.I have got table and fields for "posting date,invoice no,customer code ,invoice amount".
    But i am unable to get table and field for "payment received and outstanding amount".
    Please advise.
    Regards,
    Samaar

    Hi,
    You can get the values in the below fields of BSEG / BSID / BSAD tables.
    REBZG,  REBZJ,  REBZZ, DMBTR.
    But prerequisite for this is that, your incoming payment document must have been posted with reference to an existing outgoing invoice. Means posting made without any reference (on account payments) cannot be identified as a payment for a particular invoice item.
    The balance amount will be a derived value field. ( inv amount - payment amount = Balance receivable)
    Please co ordinate with yout ABAPer in order to fullfil your requirement.
    Regards,
    Srinu

  • Fields required for report creation

    Hi Experts,
    In My report(Invoice distribution report for company wise) I need to add fields
    invoice number,
    invoice status,
    invoice type,
    invoice date,
    invoice period,
    customer number
    account document number,
    company code,amount in local,
    g/l amount
    currency,
    customer name ,
    city,
    state.
    I have taken tables VBRK,BSEG and KNA1.I fetch fields from these tables as follows
    VBRK-invoicenumber,invoice status,invoice type,invoice date,invoice period,customer number.
    BSEG-Account document number,company code,amount in local,G/L amount,currency.
    I planned to join VBRK-vbeln = BSEG-Vbeln,
    KNA1-customer name,city,state
    I planed to join VBRK-KUNAG = KNA1-KUNNR.
    In order to test whether the values are populating as expected I tried to create Quick viewer report.
    When I create report using data source;table join when I add table bseg I am getting error as bseg is not used in join condition.
    So I checked logical data base for these 3 tables but only for bseg and kna1 two ldb are common:BRF,DDF
    My Question are:
    1.How can I include BSEG in table join as data source in creating Quick viewer report.
    2.If I use LDB BRF or DDF I can fetch all fields except invoice status and invoice type where other fields mentioned in VBRK can also fetch in BSEG.How can I get invoice status and invoice type in report.
    3.Please let me know whether my field or table selection is wrong in creating report.
    Please let me know how to get above fields in convenient way. I am waiting for your reply.
    Thanks&Regards,
    narasimha.

    Hi,
    As you suggested when i am creating query using tables bseg,bkpf and kna1(logical database BRF) and vbrk,i am getting error as "query Specifications cannot be used to generate list" in SQ01.I linked BRF logical database with vbrk by using condition vbrk-vbeln = bkpf-awkey.
    Is my condition is wrong in linking VBRK to BRF logical database.please guide me how to solve this.
    If my joining is wrong means why I didn't get error in SQ02.??
    Required fields are:Invoice number(vbrk),invoice category(vbrk),invoice date(vbrk),account document number(bkpf),company code(bkpf),G/L account(bseg),currency(bseg),state(kna1),invoice amount(vbrk).
    Do i picked fields from wrong tables?
    Regards,
    narasimha.

  • Additional Field require to flow from SAP Delivery Line to DTR Line to Freight Unit

    Dear All,
    My scenario is Delivery line Item = DTR Line Item = Freight Unit.
    For this my requirement is I have added Additional field in ECC Delivery Line Item Table (LIPS) to record BAR Code Number.
    Now I want this BAR Code Number to flow in DTR Line Item and also in Freight Unit probably in Z Field as I do not found any standard field which I can use to map Bar code Number.
    Please suggest the necessary steps to achieve the same and also the Table/ Structures that need to be modified to flow additional field from Delivery (ECC) to PI and from PI to DTR (TM) and from DTR to Freight Unit.
    Regards,
    Vibhu Gupta

    Hi,
    First the inbound PI service needs to be enhanced with the addtional field on item level and in TRQ item node, this field also needs to be enahnced;
    For this field, do you want to save it in FU header or item level?
    In the implementation class of the inbound service, this field should be mapped to DTR item instance;
    If you enhance the field in FU item level with same field name, then the field value saved in DTR item will automatically flow to FU item.
    Hope this help.
    BR, Dawson

  • Passing several fields to various classes and methods?

    Passing several fields to various classes and methods?
    Hi there.
    I have an application that allows a user to define a configuration and save it.
    The user can edit an existing configuration, add a new one, or delete an existing one.
    Once a configuration is selected the user then starts an application that relies on the selected configuration data. Each configuration holds around 60 fields.
    The configuration information is mixed between integers and strings. Around 25 are hidden from the user, and 35 can be modified by the user. The number of fields is not a fixed amount. For example the configuration contains an email-to list and the list for one configuration can have 1 address, and for another could have 10 addresses.
    I have decided to redesign using the Model View Controller concept. I am creating the model to hold the configuration information. I am trying to decide if I should have single get and set methods for each field or if I should create some kind of Object that holds all of one configuration and pass this back.
    The configuration that is selected does not really require the fields to be sorted in any particular order.
    What would you suggest is a good structure to use to pass the configuration information around?
    I have been using the Properties class with an .ini file that can be read and updated.
    Is this efficient? Doesn�t this impact the speed of processing if I have to read a file every time I want to determine what a particular configuration field is?
    Could I just create a class that reads the profile, stores the configuration information for one specific selected config, and then passes the class back to the calling procedure. This would consolidate all the file reading into one class and after that it is held in memory.
    Would it be better to read the configuration information into a collection of some sort , or a vector and pass this back to calling routine?
    public class MyModel {
         //read information to load the field of
         Private MyConfig selectedConfiguration = new MyConfig;
            Private int     selectedField1 = 0;
            /** Constructor */
         MyModel() {
              // open profile, read profile fields the
              selectedConfiguration.field1 = profileField1;  //assume this is 5
                    selectedConfiguration.field2 = profileField2;  //assume this is 10
              selectedConfiguration.field3 = �Test�;
                    field4ArrayOfStrings  = new String[selectedConfiguration.field1 ]
                                                                 [selectedConfiguration.field2];
              selectedConfiguration.field3ArrayOfStrings [0][0] = �First String�
         public class MyConfig(){
         int field1;
         int field2;
         String field3;
         String[][] field4ArrayOfStrings;
         // more stuff here �.
         // selectedConfiguration
         public void setConfiguration(MyConfig p_config) {
              String selectedConfiguration = p_config;
         public String getConfiguration() {
              return selectedConfiguration;
         //The other option is to have get and set for each field
         public void setField1(int field1) {
              String selectedField1 = field1;
         public String getField1() {
              return selectedField1;
    }Slight correction: reference to field3ArrayOfStrings changed to field4ArrayOfStrings.
    Message was edited by:
    tkman

    johndjr wrote:
    I think the term you want is "cross reference".
    Back in the olden days of green bar paper listings and linker maps they used to be quite common. At least they were where I worked.
    I have not seen any cross references in some time.
    java.lang.Object grr_argh_why_I_oughta_you_dirty_rat; // a pretty cross reference

  • Combine two tables without common field

    Hi Experts,
    I have two database tables, DBSTATORA(stores inform about all the tables involved in infoproviders), and RSDODSO ( stores information about ODS Objects. I have to list the ods objects and its associated tables as the output, but there is no common field in these two tables how will i combine these two tables, can anyone please suggest me. Any help will be fine.
    thanks,
    Prabhu.

    Hi Everyone,
    I know the ods tables names are stored like /bix/a<ods_name>00 and /bix/a<ods_name>40 and for change log it is /bic/b*. But my requirement is I have to display the size of the tables belonging to a particular ods object. So for all the tables the size is stored in DBSTATTORA which gives information about
    DBSTATTORA
    fields of this tables are:
    TNAME --> Table Name
    ANDAT --> Analyzing Date
    AMETH --> Analysis method for collecting Statistics
    NROWS --> No of rows in a table
    OCCBL --> Used blk(size) of table in KB
    EMPBL --> Empty blk(size) of table in KB
    AFREE --> Avg Freespace in a used db block
    INDBS --> Used Blk(size) of an index kb
    This is a table which stores the statistics information.
    It displays all the tables of infocubes and ods objects, but does tell that this table belongs to this infoprovider.
    I have to display data from this table as well as the infoprovider to which it belongs. So there is no proper information of database tables where the infocube and its associated tables like the facttable, dimtables are stored together. Same for the ods objects also.
    There are for ods object RSDODSOTABL which give information about ods object and the table name is stored differently <ods_name>_0000. How do i map this table with the DBSTATTORA table, the tablenames doesn't match. Same problem with RSTSODS table which give informaiton about change log table.
    And also for infocubes, there is RSDCUBE which gives information about infocubes but not the associated tables. So does anyone know where all these information is stored in some database tables. It would be of great help.
    Thanks a lot.
    Prab

  • Common field

    Hi All
    I have to enter the container number in the PO line item and it has to be there in inbound delivery.so my requuirement is to find out the common field in both the documents to enter the container numbr.
    Please guide me in this issue.
    regards
    chandra

    Sorry, I misunderstood your requirement. You need to join to facoa twice. Once to get the description for pur_type and again to get the description for prty_scode. Something like:
    SELECT a.compcode,b.descrip type_descrip, c.descrip scode_descrip, 
           pur_inv_no, pur_inv_dt, pur_num, pur_date, prty_scode,
           SUM((pur_amt - discount)+ bed_amt + sed_amt) value,
           SUM(stax_amt) stax_amt, SUM(pur_total) pur_total
    FROM fapurh a, facoa b, facoa c
    WHERE a.compcode = b.compcode and
          a.pur_type = b.scode and
          a.compcode = c.compcode and
          a.prty_scode = c.scode and
          stax_code = 'VAT05' and
          pur_date BETWEEN TO_DATE('01-apr-2005', 'dd-mon-yyyy') AND
                                   '30-apr-2005', 'dd-mon-yyyy') and
          pur_type <> 'JW0001'
    GROUP BY a.compcode, b.descrip, c.descrip, pur_inv_no, pur_inv_dt,
             pur_num, pur_date, prty_scodeHTH
    John

  • Relation between LIKP and VEKP

    Hello Friends,
    I want to know the relation between LIKP and VEKP tables.
    Please help me in this regard.
    Regards,
    Shreekant

    Hi
    LIKP and LIPS are delivery Header and Item tables
    <b>VEKP and VEPO</b> are HU header and Item tables linked with Key fields
    You can't link LIKP and VEKP directly
    Link <b>LIKP-VBELN to VEPO-VBELN </b> and take the HU number and with that link VEPO and VEKP
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Joining two tables having no common fields using one select query

    Hi Experts,
    How to join two tables which are NOT having any field in common using only one select query?
    Your help will be appreciated.
    Thank you.

    Identify a third table (or more tables) with common fields with your two tables, or change your question either removing JOIN or removing NO COMMON FIELDS, else you wont get many responses and will be left alone in outer space, as suggested by Thomas.
    If you acturally require what you written, better execute two select and merge the two internal tables merging every record from first table with every record of second table, til no more memory is available.
    Regards,
    Raymond

  • How to make metadata fields required when creating folders

    Hello all....
    Related issue with SR 3-6472229431 and SR 3-6471130611.
    We're using DIS 11.1.6 64-bits (2011_11_29 (rev 9756) 11.1.6.97) in a Windows 7 64-bits workstation (with UCM 11.1.1.5 in a Linux machine). The check-in of images to UCM goes fine.
    I'm trying to make some metadata fields required when creating a folder. These fields are required when making a check-in, but not when creating folders.
    Folders_g is enabled. DesktopTag too.
    EDIT: Patch: 14695303 - WCC 11.1.1.5.0 BUNDLE ( MLR 16 ) NOV 6 2012 applied.
    Is it possible?
    Thanks for all.
    Edited by: fgomes on 22/11/2012 03:24

    After reading your response and rereading the original question a bit closer, the metadata prompting feature does not apply to creating new folders, only content.
    Again, though, I think the focus here is in the wrong place. The metadata applied to a folder is intended to be ultimately applied to the content. You can build global rules that fire on submission of content to check if a field has a value, and throw an error if the value is empty.
    If you expect users to create folders (and actually apply any metadata to the actual folder itself), you will be disappointed. Experience shows that users are not interested in that level of detail when creating content, let alone folders. Letting typical users create folders is a bad idea anyway, as they tend to create the same inefficient folder structures they previously created in file shares within Content Server.
    If you need to tightly control folder attributes, you'll be better served by locking down the ability to create new folders. Otherwise you're looking at some type of customization. Keep in mind that you won't be able to customize the right click behavior of DIS. Any changes to DIS would have to be an enhancement request.

  • Make a field required on record creation, read only after that

    Hello,
    Does anyone know of a way to make a pick-list field required on record creation, but read-only after that? The other twist to this is that we need to allow this field to also be read-write for all the integration edits, since this field's value could change in the enterprise database.
    Thanks,
    Neal G.

    Hi !
    I think you can add a validation rule for that. Something like :
    IIf(PRE('&lt;YOURFIELD&gt;') IS NULL, &lt;&gt; '', = PRE('&lt;YOURFIELD&gt;'))
    This means that if the previous value of your field is null (it's a creation), so the value must be different than blank. Else, it must be equal to the previous value, so not modified.
    I didn't tested it, but I let you get back to me if it works... or not !
    You'll just have to add a message saying that this field is required on creation and readonly after...
    Hope this will help, feel free to ask more !
    Max

Maybe you are looking for