Communication between 2 computers

Communication between 2 computers
Hello to everyone!
I have wrote a JMS program that works wonderful on my computer
And now I want that this program can communicate between 2 computers
As the JMS allows.
I know that I should change the ip configuration or something like this.
How can I do it?
Can someone explain it to me or at least give a link to this kind of information
Thank you
Ilan

Hi.
This depends on the JMS implementation you're using. every product has its own installation instructions. Just read the manual and follow it...

Similar Messages

Communicating between two Computer via USB

Hello,
I want to connect two PCs to synchronize two different LabView VIs running on these Computers.
The perfect way would be, that the VI on PC 1 sends boolean Value to the VI on PC 2, where this value is read out and can start some process.
My Problem is that I do not have a 'normal' network and all serial Ports (but not USB) are occupied.
I would appreciate any advice or suggestion.
One of my ideas is going in the direction of an USB to 9pin serial Adapter plus a null modem adapter/cable. But I have no Idea if this would work.

I would suggest USB-Ethernet adapters and an Ethernet cross-over
cable.
The communications between computers will be faster, and you can
use your software across a larger network later on without
modifications (just change IP addresses). Your communications will be
message based rather than character based, so you won't have to
constantly poll the RS232 port for characters.
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my comput

How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my computer

Something to Consider:
If you are talking about "Avast!" Security Software, either the free or the paid version, the following may apply to you:
There are three main levels of Security in the Avast! software: Home, Work, and Public
Home is the setting many people use when "at home", that is, connected to the home network. The home network is sometimes defined as the "192.168" network: these are the computers and printers that you have and use in your home environment. The network is (most usually) private and (should be) secured with with a passphrase at your router. The Avast! Software sees the "Home" network as a "safe" environment: devices connected within the "Home" network are allowed to "talk" (communicate) with one another without undue restrictions.
Work is the next setting. The software places some restrictions on this level of communication. Home users can certainly use this setting -- in many (most) cases, the "Work" setting is a solution that provides for communication and a bit more security for the home network and its devices.
Public is the strictest setting and is meant to keep your computer safe in a public place: the library, coffee shop, on a street corner. Outside "prying eyes" are prevented from peeping and outside communications are restricted.
If you have set (or left) your Avast! software set to Public, or even Work (and you do not know how to handle the restrictions), then you may have simply locked out the communication between the printer and the computer(s) on your home network.
Open your Avast! Software and set the security level to either "Home" or "Work".
You can find out more about how to use the software settings at the Avast! website.
Advanced Users Only - You will know if you changed the Rules... this is not something one does by accident.
If you have changed the rules within the settings, you may have locked yourself out. Make sure you have both "in" and "out" traffic settings adjusted correctly for each rule you change / adapt / add.
Kind Regards,
Dragon-Fur

Using 1394 to perform communication between two PCs

Hi all,
Does anybody knows how to use a 1394 (firewire) to implement a communication between two computers using Labview ?
Do I need a special toolkit for this ?
Thanks
Eduardo

Currently, if you have installed NI-VISA, you should have the 1394 Passport already installed and running. This gives you the ability to communicate with 1394 instruments via your 1394 instruments. This is important because this helps determine how you will communicate from one computer to another. If you want to use the VISA and communicate using the FireWire INSTR, then you need to find or create drivers for your 1394 ports that allow you to communicate with them as 1394 instruments. There might be other ways to do this, but this is probably the most simple. Once you've got the pcs set up, you can just use VISA to communicate with your other devices.
Logan S.

Logos for communication between Fieldpoint modules?

I have a system with two Fieldpoint network modules: one FP2000 and one FP1601. I am presently using datasocket calls using the lookout protocol for the FP2000 to read/write the I/O items on the FP1600. There is normally no PC connected to the two. Our NI salesperson visited today and told me that the recommended means of communication between Fieldpoint network modules is using Logos. He also mentioned using the "FieldPoint Publish Data" vi. I searched all the documentation I have and can't find anything on Logos, or any way to make any sense out of what he said. Can someone please tell me exactly what he meant and how I would implement it? I have LabView RT and FieldPoint Explorer, but no other software.

Richard,
Logos is the name for the NI Ethernet Protocol. It was originally developed for networking of computers using Lookout. Using DataSocket with the Lookout URL specifier, is instructing the DataSocket client to use the logos protocol or lookout protocol (the terms are interchangeable). The FieldPoint Publish Data.vi is a VI that can be run on embedded targets (e.g. (c)FP-20xx series) that can be used to make data available via the NI Ethernet protocol. For example, if you measured two sensors and calculated a value from the two sensors, you could use the Publish Data.vi to make the calculation result available from the FP-2000.
Regards,
Aaron

Only the communication between PCs domain

Hello, I need to create a rule for that communication is only between computers dominoes. That is, if any other computer on the network that is not the field should not have any communication with the domain computers. How do I make this rule?
MCP - MCTS - MCTS AD

Hi,
As far as I know, there is not step by step guide for the Domain Isolation deployment published. However we can refer the following KB to realize the Domain
Isolation.
The related KB:
Introduction to Server and Domain Isolation
http://technet.microsoft.com/en-us/library/cc725770(v=ws.10).aspx#BKMK_3
Deploying a Basic Domain Isolation Policy
http://technet.microsoft.com/en-us/library/cc730709(v=ws.10).aspx
Domain Isolation Planning Guide for IT Managers
http://www.microsoft.com/en-us/download/details.aspx?id=16539
Domain Isolation with Microsoft Windows Explained
http://technet.microsoft.com/en-us/library/cc770610(v=ws.10).aspx#BKMK_2
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is in PI7.1 possible asynchronous communication between SOAP and ABAPProxy?

Hi,
when method execute_asynchronous has disapeared since XI/PI 7.1, is
there still way how to use ABAP proxy in asynchronous way?
We need to build asynchronous connection SOAP->PI->ABAP_Proxy.
In PI, both interfaces are defined as asynchronous (outbound for SOAP and
inbound for ABAP Proxy).
Despite of this fact, when message is sent, it is processed
synchronous way.
I have set breakpoint in my implementation of method for ABAP Proxy
message processing. When message is sent and breakpoint is reached,
whole connection stays open (between SOAP and PI and between PI and
ABAP Proxy) and waits for processing method (the breakpointed one) to
return. Only when processing method returns, is connection finelly
closed.
If i understand it correctly, this is synchronous behavior. In
asynchronous behavior, as i understand it, should be connection
between PI and ABAP Proxy of application server closed immediately
after message has been delivered. This mean before my processing
method is even called.
The same could be said about SOAP and PI communication. Connection
should be closed immediately after PI has received message. From
definition of asynchronous communication of PI is obvious, that PI
should receive message correctly and close connection to sender system
even when receiver is unreachable. It should deliver message later
when, receiver system is back on line. So why it keeps connection to
sender system open while it waits for receiver?
Why is this happening, when both interfaces are defined as
asynchronous? Could be the reason for this, if APPLICATION
ACKNOWLEDGEMENT is set on by default? If so, how can i change it
to SYSTEM ACKNOWLEDGEMENT, or disable it at all?
Or is this kind of asynchronous communication even possible since
XI/PI 7.1 ?
Processing of message we are sending can take some time, so we dont
want connection pending open while waiting for finish of
processing. Thats the reason why we have chose asynchronous model to
use.

Quote from How to Use the J2EE SOAP Adapter:
"If you select Best Effort, the Web service client will receive a response
message in the SOAP body. Otherwise, the Web service client will not receive a
response message if no error occurs."
"if no error occurs" - that is the problem. In either case he still
waits if some error occure or not. I dont want it. Once PI has
received message, I want the connection with sender to be closed. If
there will be error in communication between PI and reciever, I want
to see it only in PI log. That mean no notification to sender to be
send about that error.
Is that possible?

ITunes Library shared between computers?

I have an iMac (OSX Lion) with two user accounts that are both sharing the same iTunes Library. We now have a Macbook Air with the same user accounts. The Macbook Air obviously does not have the same hard drive space and I therefore did not choose to migrate the library to the Air...What is the best way for each user to access the shared iTunes folder from the iMac? I would like to do this while on the same LAN as well as remotely if possible.
I assume that simply setting iTunes up for "Sharing" will handle the local area question, but what about while we are away from home? I assume that iCloud with iTunes Match would be the only answer?

Rented movies cannot be shared between computers. They can only exist on a single device at a time, and can only be moved from a computer to a player such as an iPod, iPhone or Apple TV. You cannot move a rental from one computer to another.
And yes, actually they do say that, in the Rentals FAQ, among other places.

How do I drag and drop files between computers when using Home Sharing in ITunes?

How can I drag music files between computers while using Home Sharing? An older version of ITunes had a Home Sharing icon in the column browser near the playlist so it was easy to drag and drop.

Hello cacalenni,
Thanks for using the Apple Support Communities. I understand that you wish to learn how to import songs using Home Sharing in the new iTunes. The following resource should assist you in doing so:
iTunes 12 for Mac: Use Home Sharing to import items from another iTunes library
http://support.apple.com/kb/PH19614
Cheers,
Matt M.

How do I share files between computers (mac's) on the same wireless network?

How do I share files between computers (mac's) on the same wireless network?

Turn on File Sharing in System Preferences - Sharing, then you should be able to see them in the other Macs' Finder sidebars (under Shared). Click on them, click Connect As, and log in with the user credentials you're sharing from.
Matt

It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

lovinmymac wrote:
I have "automatically create previews" in the preferences UNCHECKED. Why is Aperture creating previews? For the screen image?
You might also need to turn Preview generation off for any existing Projects. Select the Project in the Projects pane and use the cog button at the top of the pane to uncheck 'Maintain Previews For Project'.
Ian

How to share files between computers and TC

What is the best way to share content/files between computers (iMac and MacBook Pro)?
I thought about using Time Capsule for this...is this NOT wise?
Thanks

What is the best way to share content/files between computers (iMac and MacBook Pro)?
The simplest way to do this would be to enable File Sharing on both Macs.
On each Mac....
Open System Preferences (gear icon on the dock)
Open Sharing
Enter a check mark next to File Sharing
Now when you open the Finder or Macintosh HD, you will see the "other" Mac and you will be able to access files/folders, etc. on the other computer.
I thought about using Time Capsule for this...is this NOT wise?
The Time Capsule was designed to work with the Time Machine application to back up your Mac(s). As such, the TC will make a complete copy of each Mac on the first backup and backup any changes after that to keep a complete timeline of each Macs files. Each computer normally will only be able to access the backups for that given computer.
While it is possible to store normal files or folders on the Time Capsule disk, this is not generally recommended as there will eventually be a struggle between Time Machine and the files on the disk as the drive begins to fill up. The other thing to keep in mind is that access to the drive for "normal" files will be quite slow.

Communication between Best Buy and Apple

Where is the communication between these two companies? It's frustrating to have NO CLUE if a phone will come in a day or in 5 weeks. Who at Apple is deciding what they end to what stores? Obviously, Best Buy has to pay for the phones. There has to be some sort of communication.
Would it really be that hard for someone high up in Best Buy to communicate with Apple? Maybe a list from each store of their orders and what they are waiting on. Give that to Apple. Apple can give some sort of answer. Exepect this much in this time frame... expect this much later. I mean, something. Instead of leaving everyone in the dark, completely.
Someone at Best Buy corporate has to have SOME clue how Apple is shipping and to what stores. To say no one has no clue at all, is nuts. And if it's true... Best Buy needs to get a clue. DO SOME WORK FOR YOUR CUSTOMERS. At least get some truth, so if we need to go elsewhere, we can. It would be better for both sides.

Apparently since they come on UPS, they don't know when the shipments are coming in or how much. Which I think is bull.
If that's the case, what I want to know is HOW do they know they received the amount they were expecting? If they don't know how much they're getting or when they're getting a shipment, then what's stopping the delivery man from stealing a box, and they wouldn't know any better? Maybe the higher up manager's know, and they aren't allowed to reveal that info, but there has to be a checks system in there somewhere verifying the stock received.

Communication between iViews

How to realize communication between two iViews of the same window but not the same portal page? I tried with using firing portal events but this doesnt seem to work with Mozilla Firefox. Do you have any other ideas?
The sending iView is a portal application the receiving iView a Web Dynpro for ABAP application (so I cant use JavaScript, I guess).
Thanks!
René
Edited by: Rene Guenther on Jan 10, 2008 3:29 PM

Hi Mrkvicka,
To enable communication between iviews you need to use the EPCF .
You can raise an event in the component of the first iview and define an OnClick event.
this event you can subscribe from the other iview
Refer to this link to get a more clear picture
DropDown Selection and EPCF
also refer to
EPCF
hope this helps,
Regards,
Uma.

Communication between jsp and abstractportalcomponent

Hello All
Communication between jsp and abstractPortalComponent.
jsp contains one input text field and one submit button.
when the user clicks on submit button it will call the component and that input value will
display in same jsp page.
how this communication will happen?
Rgrds
Sri

Hi Srikanth,
In the JAVA File,
OnSubmit Event,
String inputvalue ;
InputField myInputField = (InputField) getComponentByName("Input_Field_ID");
if (myInputField != null) {
               inputvalue = myInputField.getValueAsDataType().toString();
request.putValue("textvalue", inputvalue);
request is IPORTALCOMPONENTREQUEST Object.
In JSP File,   to retreive the value,
<%
String textstring = (String) ComponentRequest.getValue("textvalue");
%>
In PORTALAPP.XML File,
<component name="component name">
      <component-config>
        <property name="ClassName" value="classname"/>
        <property name="SafetyLevel" value="no_safety"/>
      </component-config>
      <component-profile>
        <property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
      </component-profile>
    </component>
Using the code above, You can pass and read values between abstract portal component and Jsp Page.
Instead of this, I suggest you to use JSPDYNPAGE Component for Data Exchange.
Check the [Link|http://help.sap.com/saphelp_nw2004s/helpdata/de/ce/e0a341354ca309e10000000a155106/frameset.htm].
Hope this helps you.
Regards,
Eben Joyson

Communication between 2 computers

Similar Messages

Maybe you are looking for