Communication channel is failing

hai friends
the communication channel is failing as it is not able to pick a field it is showing the error as follows
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: date_processing: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: date_processing
thanks
pendyala

Hi Sandeep,
i dont think, it can be helpful to open 3 or 4 threads for one question. It is quite difficult to follow the point of discussion if it is divided to more than one thread, additional it shows impatience.
You should invest in more details of one thread: Where did you pick the message up? How does your sceanrio look like? What does not work? What did you try? Where are your questions?
Regards,
Udo

Similar Messages

  • EAL extract fails with ORA-03113 end-of-file on communication channel error

    Hi,
    We are trying to run an EAL (v11.1.1.4) extract from an HFM (v9.3.1.4) environment onto Oracle database. We are able to run the extract successfully for few hundred records, but when the records exceeds 10 million we get the error below
    [03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#13579: Cannot execute statement for insert
    [03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#01428: OCI_ERROR: (ORA-03113: end-of-file on communication channel;Process ID: 16323;Session ID: 15 Serial number: 8288; (code=3113)) [rec#1]
    [03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#13580: Cannot rollback
    [03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#01428: OCI_ERROR: (ORA-03114: not connected to ORACLE; (code=3114)) [rec#1]
    [03 Dec 2011 06:02:41] [dbmgr] WARN : HR#13674: Data move region job failed: HR#00000: some operations failed, see details in the log file; 81877900 cell(s) processed in 70348 second(s)
    We checked on the DB and the Oracle session that was doing the insert was open even after the extract failed with the above error.
    Any idea what could be causing this??
    Thanks
    Ramya Suresh

    Hi,
    I was able to fix this issue.
    From the trace file identified the related objects and validated them.
    More details can be found in below MOS note.
    [ID 421711.1]--Understanding and Diagnosing ORA-00600 [17069] Errors
    Thanks for all the inputs...

  • How to receive alert mails when communication channel fails

    Hi everybody,
    Today there were in the "Communication Channel Monitoring" of the Runtime Workbench some Communication Channels in a "red" status and I would like to know if it is possible to receive per mail any alerts about a failing communication channel?
    In SXMB_MONI the error is the following:
    <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=ECPOPR1.corp GROUP=PRODUCCION_SANTANDER R3NAME=PR1 MSSERV=sapmsPR1 PCS=1 ERROR partner not reached (host ECPOPR1.corp, service sapmsPR1) TIME Mon Apr 20 03:25:16 2009 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODULE nixxi_r_mt.cpp LINE 8688 DETAIL NiPConnect2 SYSTEM CALL SiPeekPendConn ERRNO 79 ERRNO TEXT A remote host refused an attempted connect operation. COUNTER 1</SAP:AdditionalText>
    Usually, I receive mail alerts when messages failed since I have CCMS configurated but in the CCMS I don´t see any entries for this kind of errors with a Communication Channel...
    Thanks in advance,
    Regards,
    Olivier

    Hi!
    You can receive Alerts even though you are configured CCBPM. Through Control Step you can throw alerts but only difference between PI7.1 and XI is in 7.1 you can easily create Alert categoy in ESR itself at java stack but in XI you can't create it in Java stack you need to create this ALert category though ALRTCATDEF   t code  in ABAP Stack even though in 7.1 you created in Java Stack it will be reflecting in ABAP Stack.
    Next thing is later you need to Configure ALert Rules in RWB and in ABAP Stack at Alert Category you need to Add your XI SAP ID;s at FIxed Receipients and before adding this Ask your Basis people to link your company mail ID or any mail ID with SAP ID so that you can receive Alerts both in RWB ALert Inbox as well as your Mail Server.
    Since the above experts given diff blogs you can easily configure...
    I hope u understand the flow....right ?
    Regards::
    Amar Srinivas Eli

  • Do browser send a error report to the website if browser fail in set up communication channel first time with that site

    Suppose i want to open some site using mozilla but first time browser fail to set up communication channel. When I attempt second time it successfully set up a connection then my question is that on the second time will browser send error report of first time to that site

    What was the specific problem with the first request? For example:
    * The server reset the connection
    * Page didn't load (blank)
    * Security certificate error
    * et cetera
    In some of these cases, the destination server might not know you sent a first request. And in other cases, that will be in the log. But I do not think Firefox sends any notification of problems with previous connections, the site would have to make an educated guess about the problem based on getting two sequential requests from the same IP address.

  • If message failed at communication channel, then need to send idoc to R/3

    Hi folks,
    i got a requirment like .....If message failed at communication channel, then need to send idoc to R/3.
    can anybody suggest the possible solution.

    HI
    If you use a catching a MAIL - PI ALERT and based on that alert if u creating an IDOC then it is good if u really supress the alert immediately once the ALERT comes but if u really check and supress the ALERT fine Otherwise a CONTINOUS IDOCs will get created at SAP system.
    Also there might be some natural generic reasons for communication channel fails
    a)  somtimes if the target FTP is down
    b)  if there is some issue with FILE ENOUGH
    c)  If File adpater is placing same file already exists or with already Opened by some target application
    d)  Dynamica file naming issue. (technical issue)
    WHy cant u do scenario in the below steps without keeping BPM, CATCHING ALERTS which doesnt give exact QUARANTEE
    Do one thing make a technical design in such a way into 1 flow or 2 flows in worst case
    In INTERFACE MAPPING-->
    a) Insert your current Normal Graphical mapping
    b) Javamapping:- This code will take the first mapping output as Input through Stream Transformation and create a same FILE through JAVA FTP Comments at specified Cleint Location. I recommend in order to avoid direct interraction of writing a file at client FTP better always write at your Local PI NFS Application outbound directory which doesnt require host name and user and pwd. Even if it requires you can do a RFC lookup and maintain a host, Port, User ID, pwd, Directory, FIle naming pattern in that table or else simply DO VALUE MAPPIING and pass it through XML INPUT from FIrst mapping as additional fields
    c) WITH IN THE SAME JAVAMAPPING: -
       If it successfully writes a file - wRite a TRACE log ("FILE NAME+ Sucecssfully written+ File Bytes")
       Then create an simple small XML OUTPUT and PASS that JAVA MAPPING OUTPUT To 3rd Grahical Mapping as Input it might be less than 5KB.
    Note: - Remember that this output XML should be ina Multmapping SPLIT MERGET FORMAT with 1 FIELD or required INFO
    as KEY FIELD INFO using DOM FACTORY
    d) GRAPHICAL MAPPING: -
      SOURCE IS JAVAMAPPING OUTPUT and TARGET HAS 2 messages
                           Message 1) SAME INPUT SMALL XML OUTPUT COMING FROM JAVA MAPPING OUTPUT
                           Message 2) IDOC TY{E STRUCTURE
    Keep a Condition based on KEY VALUE Coming from source field execute either 1 Message1 or Message 2
    In this way you can complete in a single Flow. 
    Later you can deifnee a simple flow to PICK and DROP from SOURCE file  Writing through javamapping to client location Or else
    WRITE A small OS SCRIPT and CALL in Receiver FILE COMMUNICATION at OS Command so that while writing a LOG file it will move the file from Source FTP to CLient FTP location.
    Regards
    Amar Srinivas Eli

  • Failed to open Inter-Controller Communication Channels! Stk6000

    Hi pros,
    I have a problem while replacing a new controller. My storage 6180 have 2 controller A ( OK ) - B ( failed ). I power off storage than replacing controller B by a new controller.
    Now, i cannot access to controller A through serial console. F/W controller A: 7.60.x.x
    I can access to controller B through serial console and CAM which show all drive is incompatible and unassigned, no volumes, no virtual disk. F/W controller B: 7.80.x.x
    Controller B message shows  Failed to open Inter-Controller Communication Channels!
    I searched google and MOS but still have not find any solution for this problem. I will appreciate for any helps.
    This is log file from serial controller B
    09/22/02-12:03:37 (tRAID): WARN:  Failed to open Inter-Controller Communication Channels!
    09/22/02-12:03:37 (tRAID): NOTE:  LockMgr Role is Master
    09/22/02-12:03:38 (utlTimer): NOTE:  fcnChannelReport ==>  0  1
    09/22/02-12:03:40 (tHckReset): NOTE:  HealthCheck: Alt Ctl: 1 Reset_Failure, state: 0 Start
    0x8f9084 (tNetCfgInit): miiPhyInit check cable connection
    09/22/02-12:03:49 (tNetCfgInit): NOTE:  eth1: LinkDown event
    09/22/02-12:03:49 (tNetCfgInit): NOTE:  Network Ready
    09/22/02-12:04:07 (tRAID): NOTE:  WWN baseName 00040080-e5185e0e (valid==>SigMatch)
    09/22/02-12:04:07 (tRAID): NOTE:  spmEarlyData: No data available
    09/22/02-12:04:08 (tRAID): SOD: Pre-Initialization Phase Complete
    09/22/02-12:04:09 (utlTimer): NOTE:  fcnChannelReport ==>  0  1 ~2 -3
    09/22/02-12:04:14 (utlTimer): NOTE:  fcnChannelReport ==>  0  1 ~2 =3
    09/22/02-12:04:39 (utlTimer): NOTE:  fcnChannelReport ==>  0  1  2 =3
    09/22/02-12:04:40 (tHckReset): NOTE:  HealthCheck: Alt Ctl: 4 Norun_Failure, state: 0 Start
    09/22/02-12:04:40 (tHckReset): NOTE:  HealthCheckManager: Notify Event 6 Ctl_Not_Running
    09/22/02-12:04:40 (cmgrEvent): WARN:  Alt Ctl Reboot:
                                    Reboot CompID: 0x407
                                    Reboot reason: 0x6
                                    Reboot reason extra: 0x0
    09/22/02-12:04:40 (cmgrEvent): NOTE:  holding alt ctl in reset
    09/22/02-12:04:40 (cmgrEvent): NOTE:  HealthCheck: Alt Ctl: 1 Reset_Failure, state: 0 Start
    09/22/02-12:04:42 (utlTimer): NOTE:  fcnChannelReport ==> +0  1  2 =3
    09/22/02-12:04:43 (utlTimer): NOTE:  fcnChannelReport ==>  0  1  2 =3
    09/22/02-12:04:46 (tRAID): WARN:  pcm::CapabilityManager::validateAdoption exception  (DbmWriteException: recType: 85, status: -12)
    09/22/02-12:04:46 (tRAID): WARN:  dbm::RWFileSystem::initialize: Exception caught, ConstructorIOException: -16
    09/22/02-12:04:46 (tRAID): ERROR: In PersistenceManager::initialize: catch DbmNoFileSystemException: recType: 84
    09/22/02-12:04:46 (tRAID): ERROR: ADM Load Reservations failed with error (5) Exception
    09/22/02-12:04:46 (tRAID): NOTE:  ACS: Icon ping to alternate failed: -2, resp: 0
    09/22/02-12:04:46 (tRAID): NOTE:  ACS: autoCodeSync(): Process start. Comm Mode: 0, Status: 0
    09/22/02-12:04:46 (tRAID): WARN:  ACS: autoCodeSync(): Skipped since alt not communicating.
    09/22/02-12:04:46 (tRAID): WARN:  DbmNoFileSystemException: recType: 59 Line 1819 File cmgrControllerMgr.cc
    09/22/02-12:04:46 (tRAID): WARN:  DbmNoFileSystemException: recType: 59 Line 1819 File cmgrControllerMgr.cc
    09/22/02-12:04:46 (tRAID): SOD: Code Synchronization Initialization Phase Complete
    09/22/02-12:04:46 (sntpEvent): NOTE:  sntpEventHandler: VNI_GET_SYNC_TIME failed
    09/22/02-12:04:47 (tRAID): WARN:  USM  Exception caught in processUsmHeader - DbmNoFileSystemException: recType: 30
    09/22/02-12:04:47 (tRAID): WARN:  USM  Error allocating UsmStableStorageHeader in processUsmHeader() - DbmNoFileSystemException: recType: 30
    09/22/02-12:04:47 (tRAID): NOTE:  SOD failure in evf::VolumeCfgManager::initialize
    09/22/02-12:04:47 (tRAID): NOTE:  DbmNoFileSystemException in evf::VolExtentMgr::initialize
    09/22/02-12:04:47 (tRAID): NOTE:  DbmNoFileSystemException in safe::initialize
    09/22/02-12:04:47 (tRAID): ERROR: Caught DbmNoFileSystemException: recType: 95 in initialize
    09/22/02-12:04:47 (tRAID): WARN:  edrSOD: No Config File System
    09/22/02-12:04:48 (tRAID): WARN:  snrProcessDatabase: No File System Found
    09/22/02-12:04:48 (tRAID): WARN:  spm::SPMManager::initialize NoFileSystem
    09/22/02-12:04:48 (tRAID): NOTE:  fcn: Peering Disabled (Alt Unavailable)
    09/22/02-12:04:48 (tRAID): NOTE:  ion: Peering Disabled (Alt Unavailable)
    09/22/02-12:04:48 (tRAID): WARN:  Error in updating in memory dq cfg!
    09/22/02-12:04:48 (tRAID): WARN:  Caught DbmNoFileSystemException: recType: 65 in fbm::initialize
    09/22/02-12:04:48 (tRAID): WARN:  MelMgr::initialize FAILED:  Exception  Line 2197 File mlmMelMgr.cc
    09/22/02-12:04:48 (tRAID): WARN:  readDatabaseSyslogConfig:  Caught Exception DbmNoFileSystemException: recType: 74 Line 420 File mlmSyslogMgr.cc
    09/22/02-12:04:48 (tRAID): WARN:  Syslog database access failed:  Exception at Line 324 File mlmSyslogMgr.cc
    09/22/02-12:04:49 (tRAID): WARN:  Unable to intialize mirror device
    09/22/02-12:04:49 (tRAID): NOTE:  CacheMgr::cacheOpenMirrorDevice:: mirror device 0xfffffff
    09/22/02-12:04:49 (tRAID): WARN:  CacheStore::read(,): Exception DbmNoFileSystemException: recType: 24
    09/22/02-12:04:49 (tRAID): WARN:  CCM: readAndValidateCacheStore() caught CacheStoreDataException
    09/22/02-12:04:49 (tRAID): NOTE:  CCM: readAndValidateCacheStore() recovering
    09/22/02-12:04:49 (tRAID): NOTE:  CCM: readAndValidateCacheStore() partitioning for no mirroring
    09/22/02-12:04:49 (tRAID): WARN:  CacheStoreExt::read(,): Exception DbmNoFileSystemException: recType: 82
    09/22/02-12:04:49 (tRAID): WARN:  CCM: readAndValidateCacheStore() cacheStoreExt read exception
    09/22/02-12:04:49 (tRAID): NOTE:  CCM: readAndValidateCacheStore() initializes with default values
    09/22/02-12:04:49 (tRAID): NOTE:  CCM:  Changing default demand cache flush values
    09/22/02-12:04:49 (tRAID): NOTE:  CCM: validateCacheMem() cache memory is invalid
    09/22/02-12:04:49 (tRAID): NOTE:  CCM: validateCacheMem() Initializing my partition
    09/22/02-12:04:50 (tRAID): NOTE:  CacheStore::write(): Exception DbmNoFileSystemException: recType: 24
    09/22/02-12:04:50 (tRAID): WARN:  CCM: initialize() caught exception(2) CacheStoreDataException
    09/22/02-12:04:50 (tRAID): NOTE:  CCM: sodClearMOSIntentsAlt(), failure clearing MOS intents on alt
    09/22/02-12:04:52 (tRAID): WARN:  Exception caught in presMgrInit - DbmNoFileSystemException: recType: 12
    09/22/02-12:04:52 (tRAID): NOTE:  DbmNoFileSystemException in vdm::CrushDriveManager::initialize
    09/22/02-12:04:52 (tRAID): NOTE:  DbmNoFileSystemException in vdm::DriveManager::initialize
    09/22/02-12:04:52 (tRAID): NOTE:  DbmNoFileSystemException in vdm::VolumeGroupManager::initialize
    09/22/02-12:04:52 (tRAID): NOTE:  DbmNoFileSystemException in vdm::DacstoreVolManager::initialize
    09/22/02-12:04:52 (tRAID): NOTE:  DbmNoFileSystemException in vdm::PieceManager::initialize
    09/22/02-12:04:52 (tRAID): NOTE:  DbmNoFileSystemException in vdm::CrushStripeManager::initialize
    09/22/02-12:04:52 (tRAID): NOTE:  DbmNoFileSystemException in vdm::exop::ExclOpManager::initialize
    09/22/02-12:04:52 (tRAID): WARN:  CCM: initComplete() - isRestoreInProgressAlt caught IconSendInfeasibleException Error
    09/22/02-12:04:52 (tRAID): NOTE:  CacheStore::write(): Exception DbmNoFileSystemException: recType: 24
    09/22/02-12:04:52 (tRAID): WARN:  CCM: initComplete() caught(2) CacheStoreDataException
    09/22/02-12:04:53 (tRAID): NOTE:  DiagVolManager::initialize: Exception - Alt controller not ready
    09/22/02-12:04:53 (tRAID): ERROR: dbm: SubRecInterface::save caught DbmNoFileSystemException: recType: 58 - recType: 58, txn: 0x03b0de7c
    09/22/02-12:04:53 (tRAID): ERROR: dbm: SubRecInterface::save caught DbmNoFileSystemException: recType: 58 - recType: 58, txn: 0x03b0de7c
    09/22/02-12:04:53 (tRAID): WARN:  Caught DbmNoFileSystemException: recType: 57 in sam::StorageArrayManager::initialize
    09/22/02-12:04:55 (tRAID): SOD: Initialization Phase Complete
    09/22/02-12:04:53 (ProcessHandlers): WARN:  Exception caught in WWNStorage iosReleased: DbmNoFileSystemException: recType: 9
    09/22/02-12:04:53 (ProcessHandlers): WARN:  dbm::WWNStorage::iosReleased() FAILED.
    ==============================================
    Title:     Disk Array Controller
               Copyright 2008-2011 LSI Logic Corporation, All Rights Reserved.
    Name:      RC
    Version:   07.80.51.10
    Date:      10/03/2011
    Time:      15:49:14 CDT
    Models:    4980 4981 4985 4988
    Manager:   devmgr.v1080api06.Manager
    ==============================================
    09/22/02-12:04:56 (tRAID): sodMain Normal sequence finished, elapsed time = 112 seconds
    09/22/02-12:04:56 (tRAID): sodMain complete
    09/22/02-12:05:06 (ProcessHandlers): WARN:  Drive 0x10000 will be marked incompatible as DSM detected error: 12
    09/22/02-12:05:06 (ProcessHandlers): ERROR: dbm: SubRecInterface::read caught DbmNoFileSystemException: recType: 84 - recType: 84, txn: 0x03b0df9c
    09/22/02-12:05:08 (utlTimer): WARN:  Extended Link Down Timeout on channel 3
    09/22/02-12:05:10 (ProcessHandlers): WARN:  DbmNoFileSystemException: recType: 35 Line 6404 File cmgrControllerMgr.cc
    09/22/02-12:05:10 (ProcessHandlers): WARN:  DbmNoFileSystemException: recType: 35 Line 5444 File cmgrControllerMgr.cc
    09/22/02-12:05:10 (ProcessHandlers): WARN:  CCM: backupStorageAvailableAlt() caught IconSendInfeasibleException Error
    09/22/02-12:05:10 (ProcessHandlers): NOTE:  SYMbol available
    09/22/02-12:05:12 (ProcessHandlers): SOD: sodComplete Notification Complete
    09/22/02-12:05:10 (PersistentRestore): NOTE:  PSTOR: PstorRecordManager::readRecord data block not found
    09/22/02-12:05:10 (PersistentRestore): WARN:  IOManager::readBackupStatus - Pstor record does not exsit
    09/22/02-12:05:10 (PersistentRestore): NOTE:  IOManager::getBackupDataSize - read to pstor failed
    09/22/02-12:05:10 (PersistentRestore): WARN:  ddcDq & ddcTrace restore abandoned: nothing to recover
    09/22/02-12:05:10 (PersistentRestore): WARN:  PSTOR: PstorRecordMgr: removeRecord failed
    09/22/02-12:05:10 (PersistentRestore): WARN:  IOManager::readBackupStatus - Pstor record does not exist
    09/22/02-12:05:10 (PersistentRestore): NOTE:  DDC Restore Failed
    09/22/02-12:05:10 (PersistentRestore): NOTE:  IOManager::restoreData - m_DataSize:0x500000, m_StartAddress:0x3b0e320
    09/22/02-12:05:10 (PersistentRestore): NOTE:  IOManager::restoreData - Successful
    09/22/02-12:05:10 (PersistentRestore): NOTE:  ncb::IOManager::restoreData - Successful
    09/22/02-12:05:10 (PersistentRestore): NOTE:  DQ Restore Completed
    09/22/02-12:06:10 (ProcessEvents): WARN:  RAIDVolumeManager::updateAltMountStates, caught IconSendInfeasibleException Error
    09/22/02-12:18:25 (utlTimer): NOTE:  fcnChannelReport ==>  0 +1  2 =3
    09/22/02-12:18:32 (utlTimer): NOTE:  fcnChannelReport ==>  0 -1  2 =3
    09/22/02-12:18:35 (IOSched): NOTE:  Extended Link Down  ==> Chan 1
    09/22/02-12:18:42 (utlTimer): NOTE:  fcnChannelReport ==>  0 +1  2 =3
    09/22/02-12:21:23 (utlTimer): NOTE:  fcnChannelReport ==> +0  1  2 =3
    09/22/02-12:21:38 (utlTimer): NOTE:  fcnChannelReport ==> +0  1  2 =3
    09/22/02-12:22:37 (utlTimer): NOTE:  fcnChannelReport ==> +0  1  2 =3
    09/22/02-12:22:55 (tSubSys): NOTE:  HealthCheck: Alternate controller removal
    09/22/02-12:22:55 (tSubSys): NOTE:  HealthCheckManager: Notify Event 5 Ctl_Removed
    09/22/02-12:22:56 (utlTimer): NOTE:  fcnChannelReport ==> -0  1  2 =3
    09/22/02-12:23:00 (IOSched): NOTE:  Extended Link Down  ==> Chan 0
    09/22/02-12:23:01 (utlTimer): NOTE:  fcnChannelReport ==> =0  1  2 =3
    09/22/02-12:23:24 (IOSched): WARN:  Extended Link Down is over on channel 0 - lasted 29 seconds
    09/22/02-12:23:25 (utlTimer): NOTE:  fcnChannelReport ==> +0  1  2 =3

    Hi,
    I tried to insert lock-controller, manually place offline and online. It show OK on CAM for some minutes before back to be ERROR.
    I feel this controller become ERROR instead of being lock-down as before. Perhaps we should ask for a replacement because nothing we can intervene to the hardware. This is log file.
    9/29/02-07:37:15 (symTask2): NOTE:  setControllerToFailed_1: Failing alternate controller
    09/29/02-07:37:25 (symTask1): NOTE:  setControllerToOptimal_1: Setting alternate to optimal
    09/29/02-07:37:25 (symTask1): NOTE:  buc controllerAltStateChanged
    09/29/02-07:37:25 (symTask1): NOTE:  releasing alt ctl from reset
    09/29/02-07:37:26 (tHckReset): NOTE:  HealthCheck: Alt Ctl: 1 Reset_Failure, state: 0 Start
    09/29/02-07:37:28 (ccmEventTask): NOTE:  vdm::syncRequired(): Begin
    09/29/02-07:37:28 (ccmEventTask): NOTE:  vdm::syncRequired(): Complete, elapsed time = 0 seconds
    09/29/02-07:37:29 (ccmEventTask): WARN:  CCM Failed to notify the alternate to update Cache Store in pstor, writeCacheStoreToPstor() caught IconSendInfeasibleException Error
    09/29/02-07:37:29 (ccmEventTask): WARN:  CCM Failed to notify the alternate to update Cache Store in pstor, writeCacheStoreToPstor() caught IconSendInfeasibleException Error
    09/29/02-07:38:26 (tHckReset): NOTE:  HealthCheck: Alt Ctl: 4 Norun_Failure, state: 0 Start
    09/29/02-07:38:26 (tHckReset): NOTE:  HealthCheckManager: Notify Event 6 Ctl_Not_Running
    09/29/02-07:38:26 (cmgrEvent): WARN:  Alt Ctl Reboot:
                                    Reboot CompID: 0x407
                                    Reboot reason: 0x6
                                    Reboot reason extra: 0x0
    09/29/02-07:38:26 (cmgrEvent): NOTE:  holding alt ctl in reset
    09/29/02-07:38:27 (cmgrEvent): NOTE:  HealthCheck: Alt Ctl: 1 Reset_Failure, state: 0 Start
    09/29/02-07:38:28 (utlTimer): NOTE:  fcnChannelReport ==>  0 +1  2 =3
    09/29/02-07:38:33 (ccmEventTask): WARN:  CCM Failed to notify the alternate to update Cache Store in pstor, writeCacheStoreToPstor() caught IconSendInfeasibleException Error
    09/29/02-07:38:34 (ccmEventTask): WARN:  CCM Failed to notify the alternate to update Cache Store in pstor, writeCacheStoreToPstor() caught IconSendInfeasibleException Error

  • Error in Receiver Communication Channel in FCC

    I have a simple scenario of Proxy to File. I have to just one field in complete row. So my structure is as below : MT_RecordIB -> Records.  So my XSD looks like this :
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://XXXl.com/INF31018/SAPSerOrd_DaysIn" targetNamespace="http://hnwl.com/INF31018/SAPSerOrd_DaysIn">
       <xsd:element name="MT_RecordIB" type="DT_RecordIB" />
       <xsd:complexType name="DT_RecordIB">
          <xsd:sequence>
             <xsd:element name="Records" type="xsd:string" />
          </xsd:sequence>
       </xsd:complexType>
    </xsd:schema>
    I have used FCC and the parameters are :
    Recordset Structure                                  Records
    Records.fieldSeparator             'nl'
    But I am getting following error in Receiver Communication Channel :
    Failed to process message content. Reason: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_RecordIB' found in document', probably configuration error in file adapter (XML parser error)' (Software version: 3.0.21)
    Thanks,
    Pankaj Singh

    Hey Pankaj,
    Your content conversion parameter might be configured improperly.
    Refer this blogs
    /people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    Refer the following threads for your problem
    [ Unknown structure 'ns0:MT_dbglgtr_FileName' found in document'|Unknown structure 'ns0:MT_dbglgtr_FileName' found in document']
    Rgds
    Ramesh

  • Error in generating the communication channel

    Hi All,
    I am getting the following error while trying to configure the business scenario using the Integration Directory.
    Attempt to create object failed
    Unable to generate the communication channel (XI_Test_Sender_BS, XI_Sender_BS): com.sap.aii.utilxi.misc.api.ClientServerException
    Here I am trying send a message from a third party system to an SAP R/3.I had selected the adapter type as File adapter on the sender side and Idoc adapter on the receiver side.While configuring using the Configuration Wizard, the error mentioned above is generated.
    Please help me.
    Thanks and Regards,
    Soumya.

    HI Rajesh,
    Thanks for quick reply...
    My requirement was to idetify the order number in table which i have generated a sequence to be unique in DB.
    Do we have any option to process a single file at a time from the sender location instead of multiple files...i can see processing sequence <bydate> option in nfs but not in FTP.
    Please suggest....
    Thanks in advance,
    naveen

  • Communication channel - Variable Substitution error,.

    Hi,
    I am having the following mesage type used in messag emapping as a target structure
    mt_data
       -> Variable1
    I am having a validation on mt_data node in message mapping for generating it, if condition is satisfied mt_data will be generetaed. Under mt_data i am having a variable. This variable is getting populated with some data using normal source to target mapping.
    I am using this variable in my communication channel as a variable substitution, and is used to replace file name.
    The issue I am facing is, when the mt_data fails to get generated (valid reason, since validation to generate it failed), communciation channel in RWB fails saying variable for substitution not found.
    Kindly advice.
    Thanks,
    Mudita

    The issue I am facing is, when the mt_data fails to get generated (valid reason, since validation to generate it failed), communciation channel in RWB fails saying variable for substitution not found.
    1) make a check on the variable in receiver determination itself...so that if fails then the message stops in Receiver determination itself....why to take it forward till channel and then fail.
    2) Make use of some constant term to fill the variable in the mapping if the validation fails.....this will help to put value in the variable even when the validation fails and the message does not fail in channel...filename created.
    You need to check with the functional people on how they want the message prcessing to occur when the variable cannot be created by the mapping logic.
    Regards,
    Abhishek.

  • XI Communication Channel Error Explanation

    Hi All,
    Does anyone happen to know :-
    1)  Is it possible to use CCMS to email the errors coming from a communication channel error Explanation field
    2)  Are these messages stored in a table I can check
    The reason I need to know this is because we sometimes encounter an error such as "Conversion of file content to XML failed at position 838: java.lang.Exception: ERROR converting document line no. 839 according to structure 'XXX_XXX_XXX':java.lang.Exception: ERROR in configuration / structure 'XXX_XXX_XXX.': More elements in file csv structure than field names specified!
    This tells us exactly where the error occurred but using Communication Channel Monitoring the error message only remains for a little while before the polling messages remove it from the display.  Since the process runs early hours of the morning we never get to see these messages.
    Any help appreciated.
    Thanks
    Craig

    Hi Raquel,
    Let me try to clear out some things in this thread . First of all you do your alert configuration which you say you have already done. Thats good . Now you ask that you want only to monitor the communication channels and you want specific guide . Here is the specific guide.
    If you have configured alerts you will know that when you create an alert rule you have the option to choose radio button where did the error occur it could be no restriction , integration engine or adapter engine. You need to choose adapter engine.
    Now whenever the colour of the lights change to red. You will get your alerts.
    Regards
    joel
    Edited by: joel trinidade on Apr 9, 2009 9:41 AM

  • Error in Recever Mail Adapter (Communication Channel)

    Hello Experts,
    I am getting below error in recever Adapter Communication Channel. I have given SMTP, XIALL,PLAIN parameters, i have given proper: SMTP://compnay.com & correct user id and password, i browse throug all most all related links.
    Exception caught by adapter framework: java.io.IOException: server does not support PLAIN or LOGIN authentication
    Mail: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: server does not support PLAIN or LOGIN authentication
    Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: server does not support PLAIN or LOGIN authentication.
    Thanks,
    Siva

    HI Siva
    Are you trying to send Email from any file send by system or Read by PI and send as Email.
    Please describe your Scenario.
    If your email is generated from the content provided by Integraton engine use Message protocol XI PAYLOAD instead of XIALL.
    Using Authentication you change from Plain to CRAM-MD5. then it might not give any error
    Your URL should be SMTP://mailhost.company.com
    For reference check Help URL
    http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/frameset.htm
    Thanks
    Gaurav Bhargava

  • Communication channel error

    Hi All,
    I am getting an error in my communication channel such that ...
             Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: date_processing: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: date_processing
      can any one pls guide me regarding this .
    Thanks in advance
    Krushi

    Hi,
    This error is because of variable substitution.The XML path of the payload that u have given for the variable is wrong.
    Regards
    Santhosh
    Remember to set the thread to solved when you have received a solution
    Message was edited by:
            Santhosh Kumar V

  • BIC Module Error in Sender Communication channel for EDI to File scenario.

    Hi Experts,
    We are working on the EDI based scenarion where EDI files come to SAP PI from partner and then through Split 997 Adapter Func Ack is sent back to the Partner . But we are facing a issue in our sender Communication Channel which is a File Adapter Channel and uses BIC Module for the conversion of EDI to XML .Request if any one can provide any guidance on the below issue coming in sender CC.
    Error: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: EdiSegmentData read(): Edifact Format not correct : segment must end with \"segment delimiter\" (Segment : ISA). DESCRIPTION: EdiSegmentData Error: Your Edifact Format is incorrect the segment must end with \"segment delimiter\". check segment [not specified]. Last error: InhouseDocReader moveNext(): com.seeburger.jucon.dochandler.AnsiX12DocReader, offset[92(read Segment : ISA)]: could not parse segment (wrong format): EdiSegmentData: Edifact Format not correct : segment must end with "segment delimiter" (Segment : ISA) DESCRIPTION: InhouseDocReader Error: [not specified] at position [not specified] could not parse the segment [not specified] Error while reading description - wrong format.
    Thanks & Regards,
    Abhishek

    Hi Abhishek,
    Is there any special character present in the EDI file?
    the parser is not able to parse the data.
    you can check the BIC conversion log for more information.
    Regards,
    Harish

  • Issue on file sender adapter communication channel

    Hi All,
    I have an issue on some of the file sender adapter communication channels .The channels are failing with the error :
    (u201CAttempt to process file failed with com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.xi.swift.ParserException: com.sap.xi.swift.ParserException: Message does not start with character '0x1f'u201D).
    Please let me know the procedure to get this message processed.
    Thanks & Rgards
    Vishnu

    Hi Vishu,
    Find out in what encoding the file is in. for that download Notepad++ and open the file with in.
    In Encoding tab you will see the encoding format.
    1. If its not UTF-8 or ANSI then you should set the correct encoding in Sender File channel.
    2. Check for BOM characters which will not be visible directoly.
    3. Use Notepad++ to convert the content to HEX and check for hidden values. i bet there will be some Encoding BOM in the file which is creating problem while picking the file.
    Since you are using SWIFT module: try to validate the XML file using Altova XML and check weather is correct.
    also ref to this thread:http://scn.sap.com/thread/2134946
    Regards,
    Senthilprakash

  • Error opening communication channel in PI 7.1

    Hi All,
             I am getting an error while opening communication channel in PI 7.1
    The error is:
    Attempt to access the 1 requested objects on 1 failed. Detailed information:
    com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object
    Adapter Metadata File | http://sap.com/xi/XI/System, type AdapterMetaData
    from application REPOSITORY on system REPOSITORY failed. Object does not exist.
    Detailed information:
    Software component version with key ID: 3b787a8035c111d6bbe0efe50a1145a5 not found
    Can anybody please help me to fix it?
    Arindam

    Hi ,
    Please check the note mentioned below.
    Note 1337902 - Missing object after PI cache refresh for existing ESR obj.
    Thanks
    Rishi Abrol

Maybe you are looking for