Communication channels error during update
Hello,
All the Communication channels of the XI QA system are showing a status "Error during Update" Checked status of components in Runtime Workbench --> Component Monitoring. Red Alert on Adapter Engine The details of the Communication channel error below is:
com.sap.aii.af.service.administration.api.AdminException: Unable to
retrieve channel runtime status: EventException:
com.sap.engine.frame.cluster.message.PartialResponseException: One or
more of the destinations did not return a response. Response status:
[303228750-RTOE,303228751-RTOE,303981451-OK].
Has anyone encountered this before? Do you have any suggestions on where to look at to investigate on the cause of the problem?
Thanks in advance.
Regina
Hi Regina,
ask your basis guys to see the startup log of XI QA...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
Thanks,
Rajeev Gupta
Similar Messages
-
Communication channel: error during update
Hi,gurus:
We are doring a soap2rfc scenario.
After reactivating relavant object in ID,I found that the status of sender communication channel was "error during update" in RWB.Have you ever dealed with the problem?Any help will be appreciated!hii
ask your basis guys to see the startup log of XI server...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
VisualAdmin-Server-services- Tracelogs. Also can restart your adapter engine and can you exact error you can getin RWB.
Regards -
JDBC to JDBC Scenario - Communications Channel Error
I am following the published JDBC to JDBC Scenario:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/step-by-step+guides
I am a 3rd Party Vendor, and I'm using NX7: SAP Exchange Infrastructure. My goal is to have a JDBC Sender that sends MS Access data from my PC to NX7, and have a JDBC Receiver that receives MS Access data, and map the data from one database to the other via XI per the scenario, with both databases on my PC.
I set up the NX7 SAP XI per the scenario, but I'm getting an error on the NX7 Communications Channel:
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb' using the JDBC driver 'sun.jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb': SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'
The data source is in
C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb on my PC and it is a shared folder. My PC IP 204.245.44.232 is a public IP address. It should be using the JDBC-ODBC bridge driver in the JDK.
Why am I getting the error?
Thanks,
Ed CulnaneHi
Connection Parameters are of given below check
Transport Protocol: JDBC 2.0
Message Protocol: XML SQL Format
Adapter Engine: Integration Server
JDBC Driver: jdbc.odbc.JdbcOdbcDriver
Connection: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb
5) In my case there is no userid and password required, but if you have userid and password, then the parameter for Connection becomes,
jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb;Uid=yourid;Pwd=yourpwd;
Well ms access file should be in the XI Server path or it should be able to accessed by the XI
Try this above option of keeping u r file in the XI Server path instead of the local
rgd
srini -
ORA-03113: end-of-file on communication channel ERROR
After applying Database patch 3095277 to my 9.2.0.1.0 installation
in order to update it to 9.2.0.4.0,I'm getting ORA-03113: end-of-file on communication channel
ERRORS when attempting various tasks. This is a local installation running on a Windows XP Workstation.
I've even tried creating a new test database but the result is the same.
The reason for moving up to 9.2.0.4.0 is so I can start using Advanced Queuing, which I understand had problems in earlier releases.
However before the update I could at least create the JMS queue tables without ERROR whereas now I get the following errors when attempting to create a queue table in SQL Plus from within Enterprise Manager Console.
SQL*Plus: Release 9.2.0.4.0 - Production on Thu Sep 18 08:20:08 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
BEGIN SYS.DBMS_AQADM.CREATE_QUEUE_TABLE(Queue_table=> 'JMSQTBL',Queue_payload_type=>'SYS.AQ$_JMS_STREAM_MESSAGE',multiple_consumers=> false); END;
ERROR at line 1:
ORA-03113: end-of-file on communication channel
BEGIN SYS.DBMS_AQADM.CREATE_QUEUE(Queue_name=> 'JMSQUE',queue_table=> 'JMSQTBL'); END;
ERROR at line 1:
ORA-03114: not connected to ORACLE
I would be grateful of any pointers as to how to resolve this problem.
Regards
Gary.Chris, Thanks for the suggestion,
I took a look in the trace log and found the following entries that point to a ORA-00600 as you mentioned earlier.
This is only a test database so there's no great loss if
I have to re create it, but in saying that I did create a new test02 from scratch and had the same problem.
Is it posible something went wrong when applying the 9.2.0.4.0 patch ?.
Regards
Gary.
Dump file c:\oracle\admin\test01\udump\test01_ora_2556.trc
Wed Sep 17 16:25:14 2003
ORACLE V9.2.0.4.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.1 Service Pack 1, CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
Windows 2000 Version 5.1 Service Pack 1, CPU type 586
Instance name: test01
Redo thread mounted by this instance: 1
Oracle process number: 10
Windows thread id: 2556, image: ORACLE.EXE
*** 2003-09-17 16:25:14.046
*** SESSION ID:(7.17) 2003-09-17 16:25:14.031
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** 2003-09-17 16:25:14.281
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [qmxiUnpPacked2], [121], [], [], [], [], [], []
Current SQL statement for this session:
select 1
from resource_view
where any_path = '/xdbconfig.xml'
----- PL/SQL Call Stack -----
object line object
handle number name
6A4FA348 6 package body XDB.DBMS_REGXDB
6A504D88 1 anonymous block
6A576AB8 639 package body SYS.DBMS_REGISTRY
6A1DBB6C 1 anonymous block -
[SOLVED] Error during update of LUKS header on device ./file
dd if=/dev/zero of=./file bs=1M count=200
cryptsetup luksFormat -s 512 -c aes-xts-plain64 -h sha512 ./file
WARNING!
========
This will overwrite data on ./file irrevocably.
Are you sure? (Type uppercase yes): YES
Enter LUKS passphrase:
Verify passphrase:
Error during update of LUKS header on device ./file.
This only happens on my 1TB HDD (GPT, xfs filesystem). I have 2 SSDs that do not throw the error.
I tested using a flash drive formatted as GPT and using xfs filesystem and it worked.
Ideas?
Last edited by not_sure (2013-03-01 02:50:32)Hmm... I didn't know you could do that. Are you sure it can? https://wiki.archlinux.org/index.php/Di … ison_table
I thought dm-crypt basically did block level encryption.
I guess this is a "virtual partition"? Maybe https://www.linux.com/community/blogs/1 … nux/280174 helps? It seems to mount it as loopback prior to encryption?
Last edited by cfr (2013-03-01 01:07:16) -
ORA-03113: end-of-file on communication channel, error on view
Dear all,
I had created view using Set operator(UNION ALL)
CREATE OR REPLACE VIEW ABCD
AS
SELECT "AD_CLIENT_ID", "AD_ORG_ID", "UPDATED", "UPDATEDBY", "CREATED",
"CREATEDBY", "M_EMPLOYEE_MASTER_ID", "M_DEPARTMENT_ID",
"DATE_OF_JOIN", "STARTDATE", "ENDDATE", "C_PERIOD_ID", "TYP", "REF",
"VALUE", "DOCSTATUS", "USERID", isactive
FROM opend_emp
UNION ALL
SELECT "AD_CLIENT_ID", "AD_ORG_ID", "UPDATED", "UPDATEDBY", "CREATED",
"CREATEDBY", "M_EMPLOYEE_MASTER_ID", "M_DEPARTMENT_ID",
"EFFECTIVE_DATE", "STARTDATE", "ENDDATE", "C_PERIOD_ID", "TYP",
"REF", "VALUE", "DOCSTATUS", "USERID", isactive
FROM opend_payroll
UNION ALL
SELECT "AD_CLIENT_ID", "AD_ORG_ID", "UPDATED", "UPDATEDBY", "CREATED",
"CREATEDBY", "M_EMPLOYEE_MASTER_ID", "M_DEPARTMENT_ID",
"DATE_OF_JOIN", "STARTDATE", "ENDDATE", "C_PERIOD_ID", "TYP", "REF",
"VALUE", "DOCSTATUS", "USERID", isactive
FROM opend_loan
UNION ALL
SELECT "AD_CLIENT_ID", "AD_ORG_ID", "UPDATED", "UPDATEDBY", "CREATED",
"CREATEDBY", "M_EMPLOYEE_MASTER_ID", "M_DEPARTMENT_ID",
"DATE_OF_JOIN", "STARTDATE", "ENDDATE", "C_PERIOD_ID", "TYP", "REF",
"VALUE", "DOCSTATUS", "USERID", isactive
FROM opend_loantrx
UNION ALL
SELECT "AD_CLIENT_ID", "AD_ORG_ID", "UPDATED", "UPDATEDBY", "CREATED",
"CREATEDBY", "M_EMPLOYEE_MASTER_ID", "M_DEPARTMENT_ID",
"DATE_OF_JOIN", "STARTDATE", "ENDDATE", "C_PERIOD_ID", "TYP", "REF",
"VALUE", "DOCSTATUS", "USERID", isactive
FROM opend_service_ch
UNION ALL
SELECT "AD_CLIENT_ID", "AD_ORG_ID", "UPDATED", "UPDATEDBY", "CREATED",
"CREATEDBY", "M_EMPLOYEE_MASTER_ID", "M_DEPARTMENT_ID",
"EFFECTIVE_DATE", "STARTDATE", "ENDDATE", "C_PERIOD_ID", "TYP",
"REF", "VALUE", "DOCSTATUS", "USERID", isactive
FROM opend_prom
UNION ALL
SELECT "AD_CLIENT_ID", "AD_ORG_ID", "UPDATED", "UPDATEDBY", "CREATED",
"CREATEDBY", "M_EMPLOYEE_MASTER_ID", "M_DEPARTMENT_ID",
"DATE_OF_JOIN", "STARTDATE", "ENDDATE", "C_PERIOD_ID", "TYP", "REF",
"VALUE", "DOCSTATUS", "USERID", isactive
FROM opend_leave_absWhen i run the script like
select * from abcd;if i select particular column from view like
select "M_EMPLOYEE_MASTER_ID", "M_DEPARTMENT_ID" from abcd;it showing error as ORA-03113: end-of-file on communication channel.
please give some suggestion for it.
hb venkiDude,
Yes i knew this (ORA-03113: end-of-file on communication channel) error, but when i run that particular script ABCD then i got frequent error.
hb venki -
XI Communication Channel Error Explanation
Hi All,
Does anyone happen to know :-
1) Is it possible to use CCMS to email the errors coming from a communication channel error Explanation field
2) Are these messages stored in a table I can check
The reason I need to know this is because we sometimes encounter an error such as "Conversion of file content to XML failed at position 838: java.lang.Exception: ERROR converting document line no. 839 according to structure 'XXX_XXX_XXX':java.lang.Exception: ERROR in configuration / structure 'XXX_XXX_XXX.': More elements in file csv structure than field names specified!
This tells us exactly where the error occurred but using Communication Channel Monitoring the error message only remains for a little while before the polling messages remove it from the display. Since the process runs early hours of the morning we never get to see these messages.
Any help appreciated.
Thanks
CraigHi Raquel,
Let me try to clear out some things in this thread . First of all you do your alert configuration which you say you have already done. Thats good . Now you ask that you want only to monitor the communication channels and you want specific guide . Here is the specific guide.
If you have configured alerts you will know that when you create an alert rule you have the option to choose radio button where did the error occur it could be no restriction , integration engine or adapter engine. You need to choose adapter engine.
Now whenever the colour of the lights change to red. You will get your alerts.
Regards
joel
Edited by: joel trinidade on Apr 9, 2009 9:41 AM -
Customer Coversion Using Interface Table - Error during update
I need to import customers from legacy applicatiion and is planning to use standard customer interface for that. For testing, I am able to create customers with hardcoded values. But while I try to update the same customer record (again using hard coded values), it gives me error and is not generating the error report as well. I am getting the following error during update:
racudc: ORA-20212: Enter valid Billing Fields.
ORA-06512: at "APPS.ADVOAR_CUST
racudc: Error updating customers.
or
racudc: updated 1 partiesracudc: Partyrel 1 parties
racudc: ORA-20210: You have edited one of the following fields, Extended Billi
racudc: Error updating customers.
Also it seems we can not update an address, site_use_code, or PRIMARY_SITE_USE_FLAG using customer interface.
The following is the test record I inserted for updating the customer I created and ran the customer interface:
insert into ra_customers_interface
(ORIG_SYSTEM_CUSTOMER_REF
,INSERT_UPDATE_FLAG
,CUSTOMER_NAME
,CUSTOMER_STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,CREATED_BY
,CREATION_DATE
,ORIG_SYSTEM_ADDRESS_REF
,ADDRESS1
,CITY
,COUNTY
,STATE
,POSTAL_CODE
,COUNTRY
,customer_attribute13
values
('APP1-492503' --ORIG_SYSTEM_CUSTOMER_REF
,'U' --INSERT_UPDATE_FLAG
,'Pizza Hut - CDH TEST4' --CUSTOMER_NAME
,'A' --CUSTOMER_STATUS
,-1 --LAST_UPDATED_BY
,sysdate --LAST_UPDATE_DATE
,-1 --CREATED_BY
,sysdate --CREATION_DATE
--,'Y' --PRIMARY_SITE_USE_FLAG
--,'BILL_TO' --SITE_USE_CODE
,'APP1-492503-ADDR1' --ORIG_SYSTEM_ADDRESS_REF
,'1 River Road, Bldg 1' --ADDRESS1
,'SCHENECTADY' --CITY
,'SCHENECTADY' --COUNTY
,'NY' --STATE
,12305 --POSTAL_CODE
,'US' --COUNTRY
,'55'
I am testing this in 11.5.10 env. Any help on this is appreciated.
Thanks,
MKConvert only the data you need. And the data you need is probably less than you think. For example, other than open invoices (invoices for which money is still owed), you probably don’t need to convert ANY old invoices. You may want to convert data on what was purchased (e.g., event registration, membership, product, etc.) but the actual details (e.g., payment type, payment date) are probably no longer significant.
http://www.e-datapro.net/data_conversion.htm -
Getting end-of-file on communication channel error on this query
Hi guys,
I'm getting the end-of-file on communcation channel error when running the following query in SQL PLUS, If run it in a stored procedure called through code of JDBC, it gave "no more data to read from socket" error. Any idea what went wrong? kind of frustrated now. We are using the Oralce 9.0.1.4.0, which suppose to fix some sdo_uion and sdo_buffer bugs. Thanks a lot!!
select SDO_GEOM.SDO_BUFFER((SELECT SDO_AGGR_UNION(MDSYS.SDOAGGRTYPE(GEOLOC, 0.011119487)) FROM GEOTEL_SOURCE where MSA='5000' and COMPANY_NAME ='AMERICAN FIBER SYSTEMS'),1.0,5,'unit=MILE arc_tolerance=0.05') from GEOTEL_SOURCE a where a.MI_PRINX = 1;Hi Daniel,
Just tried the 9.2.0.2 patch, seems to work better now. At least I don't get the end-of-file on communication channel error. But how about the speed thing? I isolated the problem, and find out that sdo_aggr_union is taking too long to finish( 1 Hour!!! for 2300 lines with the same city. Any clue to optimize it, I tried some hint like /*+ordered*/ No_Merge and something like that, does not improve though. Thanks! -
End of communication channel error
While working with our application developed in VB, In some times when I use describe command in sql * plus, giving "end of communication channel error" and getting disconnected from the database. Select and other DML commands are working well.
Any suggestions please...
Thanks in advance....
UMAMAHESWARA REDDYCheck the alert log and with your network people for any errors.
-
ME 808: System error: error during update Table EKAB
Hi,
Couple of years ago, during carve out, one of the contracts was deleted.
A PO created against that contract carries some open quantities. Now our purchasing wants to close this PO, either by changing the quantity to delivered quantity (delivered quantity is lesser than PO quantity), or by checking the delivery complete box. But they are not able to do so, as there was no contract number exists in the system table.
I propose to create a contract with the same number mentioned in the PO and then to change the quantity in the purchase req and PO. However now the system issues a dump error message "ME 808: System error: error during update Table EKAB".
Can anyone help how to resolve the issue?
Any body had similar situation?
Thanks for your help.
Regards,
ShivaHi,
I am not sure how the external consultants deleted this contract during carve out.
Our division was bought out from another company and moved the data to our SAP system.
I checked the OSS and found note 922427 could resolve the issue.
Thanks for your response.
Regards -
Communication Channel Errors to be monitored in CCMS
Hi,
We have set up CCMS Monitoring templates for PI monitoring. We have a business requirment to send communication channel errors to the IT team via CCMS
We have configured ALERTCATEGORIES and defined alert rules. The communication channel errors result in alerts. These alert categories are visible under the CCMS PI monitoring template.
What is not getting transmitted is the alert long and short text in CCMS.
is there any way to achieve this?
Please point to how to guide or blogs for the same.
Thanks
AbhishekHi Amit...
Check the error i got when communication channel is red...
till now it was working fine.......i tested with a file which has unproper mapping ..and sent it....it gave an error...with mapping exception..(Please do remember..before i sent unproper XML....commmunication channel was green)
it often happen when i use unproper XML......
here is the messages it says
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '/102' too long (>1 for 3. column) - must stop', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '/102' too long (>1 for 3. column) - must stop', probably configuration error in file adapter (XML parser error)'
Edited by: Harsha reddy on Jun 20, 2008 10:01 PM -
I can't open my itunes
there was an error during update downloadSee... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
Error during update of Table VBAP (RC= 4, Key= 5096672)
Hello experts,
i am getting error as
Update was terminated
System ID.... Q70
Client....... 999
User..... HPROLLSD
Transaction.. VA02
Update key... 4EF9258A885201B1E10080000A140014
Generated.... 28.12.2011, 18:08:25
Completed.... 28.12.2011, 18:08:25
Error Info... Error during update of Table VBAP (RC= 4, Key= 5096672)
Please help me on this issue.
Regards
NarendraHi,
Relevant issue,go through the link it could be help you.
Express document "Update was terminated" received from author
Ram -
End-of-communication channel error from client
In my server oracle(oracle9i enterprices edition) is working fine but from client side i'm getting the following error
*end-of-communication channel error
But my network is working fine
anyone can you give me the solution for this problem....?
Message was edited by:
user497084checkout TNSPING <service name> from cmd prompt
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\NJi>tnsping issl
TNS Ping Utility for 32-bit Windows: Version 2.3.2.1.0 - Production on 25-OCT-06
14:36:06
Copyright , 1996(c) Oracle Corporation 1995. All rights reserved.
Attempting to contact (ADDRESS=(COMMUNITY=tcp.world)(PROTOCOL=TCP)(Host=198.1.2.
15)(Port=1521))
OK (100 msec)
Maybe you are looking for
-
Error while running ETL for Financials_Oracle R1213.
Hi All, I have done all installation and configuration for OBIA 7.9.6.4. I am getting following error while running ETL for Financials_Oracle R1213. =====================================================================================================
-
Why don't I have the invite icon on the bottom right of my calendar screen and how do I get it? Why wouldn't my 4S have this? But iPhone 4 users do? It is already turned on in my settings but that icon is missing in my calendar.
-
How to permanently get rid of Bing in Safari
I would like to permanently get rid of Bing in Safari. It keeps overriding Google. I do not like Bing.
-
Mac Pro Late 2013 USB problems / freezing
I have a quad-core CPU Mac Pro late 2013 (Model Identifier: MacPro6,1). MacOS X 10.9.5. I have had all sorts of USB devices hooked up to it. At any one time, I usually have all 4 ports filled. I have a 3TB USB 3.0 disk that stores my large files,
-
ITunes won't start after update
Hi, I just upgraded my ITunes using the normal Apple update process when I was prompted - and now I-Tunes won't start at all. I can see the ITunes.exe start in Windows Task Manager....then it just shuts down again. Any ideas ?