Error during update of Table VBAP (RC= 4, Key= 5096672)

Hello experts,
i am getting error as
Update was terminated
System ID....   Q70
Client.......   999
User.....   HPROLLSD
Transaction..   VA02
Update key...   4EF9258A885201B1E10080000A140014
Generated....   28.12.2011, 18:08:25
Completed....   28.12.2011, 18:08:25
Error Info...   Error during update of Table VBAP (RC= 4, Key= 5096672)
Please help me on this issue.
Regards
Narendra

Hi,
Relevant issue,go through the link it could be help you.
Express document "Update was terminated" received from author
Ram

Similar Messages

  • ME 808: System error: error during update Table EKAB

    Hi,
    Couple of years ago, during carve out, one of the contracts was deleted.
    A PO created against that contract carries some open quantities. Now our purchasing wants to close this PO, either by changing the quantity to delivered quantity (delivered quantity is lesser than PO quantity), or by checking the delivery complete box. But they are not able to do so, as there was no contract number exists in the system table.
    I propose to create a contract with the same number mentioned in the PO and then to change the quantity in the purchase req and PO. However now the system issues a dump error message "ME 808: System error: error during update Table EKAB".
    Can anyone help how to resolve the issue?
    Any body had similar situation?
    Thanks for your help.
    Regards,
    Shiva

    Hi,
    I am not sure how the external consultants deleted this contract during carve out.
    Our division was bought out from another company and moved the data to our SAP system.
    I checked the OSS and found note 922427 could resolve the issue.
    Thanks for your response.
    Regards

  • Customer Coversion Using Interface Table - Error during update

    I need to import customers from legacy applicatiion and is planning to use standard customer interface for that. For testing, I am able to create customers with hardcoded values. But while I try to update the same customer record (again using hard coded values), it gives me error and is not generating the error report as well. I am getting the following error during update:
    racudc: ORA-20212: Enter valid Billing Fields.
    ORA-06512: at "APPS.ADVOAR_CUST
    racudc: Error updating customers.
    or
    racudc: updated 1 partiesracudc: Partyrel 1 parties
    racudc: ORA-20210: You have edited one of the following fields, Extended Billi
    racudc: Error updating customers.
    Also it seems we can not update an address, site_use_code, or PRIMARY_SITE_USE_FLAG using customer interface.
    The following is the test record I inserted for updating the customer I created and ran the customer interface:
    insert into ra_customers_interface
    (ORIG_SYSTEM_CUSTOMER_REF
    ,INSERT_UPDATE_FLAG
    ,CUSTOMER_NAME
    ,CUSTOMER_STATUS
    ,LAST_UPDATED_BY
    ,LAST_UPDATE_DATE
    ,CREATED_BY
    ,CREATION_DATE
    ,ORIG_SYSTEM_ADDRESS_REF
    ,ADDRESS1
    ,CITY
    ,COUNTY
    ,STATE
    ,POSTAL_CODE
    ,COUNTRY
    ,customer_attribute13
    values
    ('APP1-492503' --ORIG_SYSTEM_CUSTOMER_REF
    ,'U' --INSERT_UPDATE_FLAG
    ,'Pizza Hut - CDH TEST4' --CUSTOMER_NAME
    ,'A' --CUSTOMER_STATUS
    ,-1 --LAST_UPDATED_BY
    ,sysdate --LAST_UPDATE_DATE
    ,-1 --CREATED_BY
    ,sysdate --CREATION_DATE
    --,'Y' --PRIMARY_SITE_USE_FLAG
    --,'BILL_TO' --SITE_USE_CODE
    ,'APP1-492503-ADDR1' --ORIG_SYSTEM_ADDRESS_REF
    ,'1 River Road, Bldg 1' --ADDRESS1
    ,'SCHENECTADY' --CITY
    ,'SCHENECTADY' --COUNTY
    ,'NY' --STATE
    ,12305 --POSTAL_CODE
    ,'US' --COUNTRY
    ,'55'
    I am testing this in 11.5.10 env. Any help on this is appreciated.
    Thanks,
    MK

    Convert only the data you need. And the data you need is probably less than you think. For example, other than open invoices (invoices for which money is still owed), you probably don’t need to convert ANY old invoices. You may want to convert data on what was purchased (e.g., event registration, membership, product, etc.) but the actual details (e.g., payment type, payment date) are probably no longer significant.
    http://www.e-datapro.net/data_conversion.htm

  • ME 807: System error: error during insert in table KONV

    Hi,
    I got the below error when creating PO using ME21N, what should I do?
    ME 807: System error: error during insert in table KONV
    Thanks.

    During the creation of Purchasing Orders the system displays the message "Error during insert in table KONV". The problem is solved and I would like to share the steps we use to solve the problem.
    You can get details of the error in the Business Workplace (T-Code SBWP) or through the transaction SM13. The details of the error are:
    Function Module
    ME_CREATE_DOCUMENT
    Status
    Update was terminated
    Report
    LEINUU03
    Row
    167
    Message
    ME807 System error: error during insert in table KONV
    I applied the SAP Note 1610553 - BAPI_PO_CHANGE: Header conditions are not transferred which describes exactly the problem but it was not solved.
    The solution was creating a new Purchasing Record and, before saving, remove all the conditions in Header level and save the document. After that, it's possible to create documents without problem.

  • Error in updating to table WRPT

    Hi All,
    I am trying to update lenght, width and height for Material .
    After i save the article and go back "It gives Express Document " which doesnot save the changes ..
    When i checked SM31 it gives error" Error in updating to table WRPT"
    Regards
    Vikrant M Kelkar

    Still not sorted

  • Error in updating OBNK Table ( Bank Statements and Reconciliations,Manual)

    PLease advise ,
    Bank Statements and Reconciliations,Manual Reconciliation
    Client is receiving the following message:
    Error in updating OBNK Table
    Edited by: Philip Eller on May 20, 2008 9:03 AM

    Hi Darpal Thiarha,
    Please kindly refer to note 1132591 and note 1128677 to see if these are relevant to this issue. Upgrading to  2007A PL15 or above may avoid such issues relevant with the error 'Error in updating OBNK Table'.
    Regards,
    Candice Ren
    SAP Business One Forums Team

  • Error in updating condition table 372

    Hello,
    While saving Excise Invoice I am facing error 'Error in updating condition table 372'.Could you please solve this probelm?
    Thanks in Advance

    Dear All,
    I done this--by doing some configuration changes.
    Normally while doing Exports we are tempted to use the same sales area and accordingly we may give the combination of excise grp+series grp+export type in IMG>>>Logistics General>>>India>>>Business transactions>>>Outgoing excise invoices>>>Maintain default excise groups and series groups.
    Once after removing the export type to your sales area combination--system will show this error--and we cannot even post the Excise invoices.(J1IIN)
    I tried in my IDES--that with export type(Ex.Export under Bond)--with this assignment--i am able to post my excise invoices.
    Once after removing this assignment of export type--again i am getting this error.
    Actually i am not even aware why it is happening--almost after two months of struggle--i find this.
    (i feel it is in the same way that we cannot even open/See a sales order by deleting sales group which was created&used previously)
    i am sharing this because somebody may get a little help with my thread.
    Mark this if helpful--there by others can easily find this thread.
    Phanikumar

  • Communication channel: error during update

    Hi,gurus:
    We are doring a soap2rfc scenario.
    After reactivating relavant object in ID,I found that the status of sender communication channel was "error during update" in RWB.Have you ever dealed with the problem?Any help will be appreciated!

    hii
    ask your basis guys to see the startup log of XI server...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
    VisualAdmin-Server-services- Tracelogs. Also can restart your adapter engine and can you exact error you can getin RWB.
    Regards

  • ME-807 System error: error during insert in table EKKO in SM13

    Hello Experts,
    I have been searching a lot in SDN and in google about the ERROR ME-807 System error: error during insert in table EKKO but still i have not got any satisfactory answer.
    In ME31K when I create the contract and put some validation check on target value filed in BADI Implementation ME_PURCHDOC_POSTED while saving it .
    Now after rectfying the valdiation checks and saving the contract again i get this ERROR in SM13 and i can not even see the contract in ME33K. It says that doument does not exist.
    Please let me know what could be the possible reason for this.
    Thanks,
    Naveen

    Hi Jan,
    This ERROR is coming from a function module  ME_CREATE_DOCUMENT .
    The code snippet from where this error s comin is as below:-
      DATA: LS_EKUB_NEW TYPE EKUB.
      DATA: L_EBELP     LIKE IND_EKKI-EBELP,
            L_TABIX     LIKE SY-TABIX,
            L_TABIX_1   LIKE SY-TABIX,
            L_EHP4_P2PSE_ACTIVE TYPE XFELD.
    ------- Bestellkopf hinzufuegen -
      MOVE NEKKO TO EKKO.
      INSERT EKKO.
      IF SY-SUBRC NE 0.
        MESSAGE A807 WITH 'EKKO'.
      ENDIF.
    Thanks,
    Naveen

  • Communication channels error during update

    Hello,
    All the Communication channels of the XI QA system are showing a status "Error during Update"  Checked status of components in Runtime Workbench --> Component Monitoring. Red Alert on Adapter Engine The details of the Communication channel error below is:
    com.sap.aii.af.service.administration.api.AdminException: Unable to
    retrieve channel runtime status: EventException:
    com.sap.engine.frame.cluster.message.PartialResponseException: One or
    more of the destinations did not return a response. Response status:
    [303228750-RTOE,303228751-RTOE,303981451-OK].
    Has anyone encountered this before? Do you have any suggestions on where to look at to investigate on the cause of the problem?
    Thanks in advance.
    Regina

    Hi Regina,
    ask your basis guys to see the startup log of XI QA...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
    Thanks,
    Rajeev Gupta

  • Error during update download

    I can't open my itunes
    there was an error during update download

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562

  • 1 duplicate key error during insert into table

    Dear Guru's
    While upgrading the SAP_HR patch, I am facing this issue
    Current level is SAPKE60455
    Trying to apply patch - SAPKE60456
    This is seen in the import log
    Start import R3TRVDATV_512W_O ...
    client 000:   1
    client 001:   1
    client 070:   1
    client 080:   1
    client 100:   1
    client 320:   1
    1 duplicate key error during insert into table T512T occured
    End import R3TRVDATV_512W_O (with warnings)
    Please help, thank in advance
    R3trans is at version 6.19
    Regards,
    Omkar

    Hello,
    Issue was resolved after upgrading the R3trans
    Regards,
    Omkar

  • [SOLVED] Error during update of LUKS header on device ./file

    dd if=/dev/zero of=./file bs=1M count=200
    cryptsetup luksFormat -s 512 -c aes-xts-plain64 -h sha512 ./file
    WARNING!
    ========
    This will overwrite data on ./file irrevocably.
    Are you sure? (Type uppercase yes): YES
    Enter LUKS passphrase:
    Verify passphrase:
    Error during update of LUKS header on device ./file.
    This only happens on my 1TB HDD (GPT, xfs filesystem).  I have 2 SSDs that do not throw the error. 
    I tested using a flash drive formatted as GPT and using xfs filesystem and it worked.
    Ideas?
    Last edited by not_sure (2013-03-01 02:50:32)

    Hmm... I didn't know you could do that. Are you sure it can? https://wiki.archlinux.org/index.php/Di … ison_table
    I thought dm-crypt basically did block level encryption.
    I guess this is a "virtual partition"? Maybe https://www.linux.com/community/blogs/1 … nux/280174 helps? It seems to mount it as loopback prior to encryption?
    Last edited by cfr (2013-03-01 01:07:16)

  • BI Administrator Error When Updating Rowcount: table or view does not exist

    I am using BI Administrator 11g. After creating a new repository and importing metadata, I brought the Physical model into the BMM layer. When I tried to update the rowcount for the tables in the physical layer, I get:
    There was an error while updating row count for "<instance>".."<schema>"."<tablename>"
    [nQSError 17011] SQL statement execution failed.
    [nQSError 17001] Oracle error code 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute: select count(*) from <tablename>.
    I created the connection pool during the import process and the tables were found at that time. But after the import is complete I can never update the row counts. I do have access to all the tables in question via the user account in the connection pool.
    Anyone have any ideas?
    Thanks,
    Ken

    You need to check "Require Fully Qualified Name check box in connection pool properties. This is needed when you are using non owner user name for accessing database shemas.

  • Error while updating DBDIFFVIEW table

    Hi,
    When we are doing new entries into the table: DBDIFFVIEW, the error:
    " Fill table key for table DBDIFFINFO only up to position 040 only  " is coming.
    Since updating the table at DB level directly is not advisable, please advise to correct the above error.
    Thanks & Regards,
    DVRK

    Hi All,
    The entries are maintained from DB level.
    Thanks for the help.
    DVRK

Maybe you are looking for